Modern laptops with hotswap bays still tend to utilise a PATA interface
on a SATA bridge, generally with the host controller in some legacy
emulation mode rather than AHCI. This means that the existing hotplug
code in libata is unable to work. The ACPI specification states that
these devices can send notifications when hotswapped, which avoids the
need to obtain notification from the controller. This patch uses the
existing libata-acpi code and simply registers a notification in order
to trigger a rescan whenever the firmware signals an event.
Signed-off-by: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
---
I've tested this on the Dell I have here - the removal is a bit chatty
(and it spends several seconds attempting to revalidate), but it
destroys the device happily enough and handles reinsertion without
complaining.
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index c059f78..bc6bea6 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -66,6 +66,17 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap)
}
}
+static void ata_acpi_notify(acpi_handle handle, u32 event, void *data)
+{
+ struct ata_port *ap = data;
+ struct ata_eh_info *ehi = &ap->eh_info;
+
+ ata_ehi_clear_desc(ehi);
+ ata_ehi_push_desc(ehi, "ACPI event");
+ ata_ehi_hotplugged(ehi);
+ ata_port_freeze(ap);
+}
+
/**
* ata_acpi_associate - associate ATA host with ACPI objects
* @host: target ATA host
@@ -97,6 +108,12 @@ void ata_acpi_associate(struct ata_host *host)
ata_acpi_associate_sata_port(ap);
else
ata_acpi_associate_ide_port(ap);
+
+ if (ap->device->acpi_handle)
+ acpi_install_notify_handler (ap->device->acpi_handle,
+ ACPI_SYSTEM_NOTIFY,
+ ata_acpi_notify,
+ ap);
}
}
--
Matthew Garrett | mjg59@xxxxxxxxxxxxx
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
