Re: SATA error while resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Maciek Rutecki wrote:
> rutek:/home/maciek# swapoff /dev/sda6
> rutek:/home/maciek# sync
> rutek:/home/maciek# cat /dev/zero > /dev/sda6
> cat: błąd zapisu: Błąd wejścia/wyjścia (write error, after few minutes,
> probably sda6 is full)
> 
> rutek:/home/maciek# dd if=/dev/zero of=/dev/sda6
> dd: zapis do `/dev/sda6': Błąd wejścia/wyjścia
> 5992177+0 przeczytanych recordów
> 5992176+0 zapisanych recordów
> skopiowane 3067994112 bajtów (3,1 GB), 298,159 sekund, 10,3 MB/s
> rutek:/home/maciek# mkswap /dev/sda6
> Setting up swapspace version 1, size = 3067990 kB
> no label, UUID=2061df6e-d385-4367-9a4c-c8431e57b73a
> rutek:/home/maciek# swapon /dev/sda6
> 
> 
> dmesg:
> Adding 2996080k swap on /dev/sda6.  Priority:-2 extents:1 across:2996080k
> 
> Also I try:
> dd if==/dev/sda... of=/dev/null for all partitions
> Test disk with bios utility and smartctl. Use autotest (bash shared
> mapping and disktest). No errors/warnings. Only (sometimes) while system
> resume from suspend to disk. Disk 10 months old...

Hmmmm... Does Power-Off_Retract_Count increase after suspend/resume cycle?

-- 
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux