Hi,
I've seen this message in my dmsg:
...
ACPI: System BIOS is requesting _OSI(Linux)
ACPI: Please test with "acpi_osi=!Linux"
Please send dmidecode to linux-acpi@xxxxxxxxxxxxxxx
...
So, I sent you my dmidecode and dmesg. Feel free to mail for more info.
Linux version 2.6.22-1-amd64 (Debian 2.6.22-3) (waldi@xxxxxxxxxx) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14)) #1 SMP Sun Jul 29 13:54:41 UTC 2007
Command line: root=/dev/sda2 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
BIOS-e820: 000000003fee0000 - 000000003ff00000 (ACPI NVS)
BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
end_pfn_map = 1048576
DMI present.
ACPI: RSDP 000F63D0, 0014 (r0 PTLTD )
ACPI: RSDT 3FEE2DC7, 0050 (r1 PTLTD Capell00 6040000 LTP 0)
ACPI: FACP 3FEECDEE, 0074 (r1 LGE ROCKY 6040000 LOHR 5A)
ACPI: DSDT 3FEE47C7, 8627 (r1 LGE ROCKY 6040000 INTL 20050309)
ACPI: FACS 3FEEDFC0, 0040
ACPI: APIC 3FEECE62, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A)
ACPI: HPET 3FEECECA, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A)
ACPI: MCFG 3FEECF02, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A)
ACPI: BOOT 3FEECFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: APIC 3FEECF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: SSDT 3FEE45B9, 020A (r1 SataRe SataAhci 1000 INTL 20050624)
ACPI: SSDT 3FEE4176, 0443 (r1 LGE RKY_EGFX 1000 INTL 20050624)
ACPI: SSDT 3FEE33A3, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
ACPI: SSDT 3FEE32FD, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
ACPI: SSDT 3FEE2E17, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@xxxxxxxxxxxxxxx
No NUMA configuration found
Faking a node at 0000000000000000-000000003fee0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000003fee0000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 261856
On node 0 totalpages: 261759
DMA zone: 56 pages used for memmap
DMA zone: 1019 pages reserved
DMA zone: 2924 pages, LIFO batch:0
DMA32 zone: 3524 pages used for memmap
DMA32 zone: 254236 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 37896 bytes of per cpu data
Built 1 zonelists. Total pages: 257160
Kernel command line: root=/dev/sda2 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 1994.999 MHz processor.
Console: colour VGA+ 80x25
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1021556k/1047424k available (2009k kernel code, 25480k reserved, 946k data, 296k init)
Calibrating delay using timer specific routine.. 3994.35 BogoMIPS (lpj=7988716)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring handled by SMI
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 10390606
Detected 10.390 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.03 BogoMIPS (lpj=7980074)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
Brought up 2 CPUs
migration_cost=28
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: System BIOS is requesting _OSI(Linux)
ACPI: Please test with "acpi_osi=!Linux"
Please send dmidecode to linux-acpi@xxxxxxxxxxxxxxx
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: Power Resource [CTHT] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: ACPI device : hid PNP0A08
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid INT0800
pnp: ACPI device : hid PNP0103
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0401
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0F13
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
pnp: match found with the PnP device '00:04' and the driver 'system'
pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
pnp: match found with the PnP device '00:06' and the driver 'system'
pnp: match found with the PnP device '00:07' and the driver 'system'
pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: d8000000-d80fffff
PREFETCH window: c8000000-cfffffff
PCI: Bridge: 0000:00:1c.0
IO window: 3000-3fff
MEM window: d4000000-d5ffffff
PREFETCH window: d0000000-d1ffffff
PCI: Bridge: 0000:00:1c.2
IO window: 4000-4fff
MEM window: d6000000-d7ffffff
PREFETCH window: d2000000-d3ffffff
Time: hpet clocksource has been installed.
PCI: Bridge: 0000:00:1c.3
IO window: disabled.
MEM window: d8100000-d81fffff
PREFETCH window: disabled.
PCI: Bus 7, cardbus bridge: 0000:06:00.0
IO window: 00005000-000050ff
IO window: 00005400-000054ff
PREFETCH window: 50000000-53ffffff
MEM window: 54000000-57ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 5000-5fff
MEM window: d8200000-d82fffff
PREFETCH window: 50000000-53ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 6900k freed
Simple Boot Flag at 0x38 set to 0x1
audit: initializing netlink socket (disabled)
audit(1186233397.128:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:09' and the driver 'serial'
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:0b' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:0c' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 296k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: Transitioning device [FAN0] to D3
ACPI: Transitioning device [FAN0] to D3
ACPI: Fan [FAN0] (off)
ACPI: SSDT 3FEE3E76, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT 3FEE3602, 07EF (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 3FEE40AE, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
ACPI: SSDT 3FEE3DF1, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [TZ0] (52 C)
ACPI: Thermal Zone [TZ1] (40 C)
ACPI: Thermal Zone [TZ2] (40 C)
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd8504000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
pnp: the driver 'ide' has been registered
SCSI subsystem initialized
libata version 2.21 loaded.
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001860
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:06:00.1[A] -> GSI 16 (level, low) -> IRQ 16
firewire_ohci: Added fw-ohci device 0000:06:00.1, OHCI version 1.10
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 19
ICH7: chipset revision 2
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
firewire_core: created new fw device fw0 (0 config rom retries)
usb 5-1: new full speed USB device using uhci_hcd and address 2
hda: HL-DT-ST DVDRAM GSA-T10N, ATAPI CD/DVD-ROM drive
usb 5-1: configuration #1 chosen from 1 choice
hda: selected mode 0x42
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ahci 0000:00:1f.2: version 2.2
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 cmd 0xffffc2001060c500 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1275
ata2: SATA max UDMA/133 cmd 0xffffc2001060c580 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1275
ata3: SATA max UDMA/133 cmd 0xffffc2001060c600 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1275
ata4: SATA max UDMA/133 cmd 0xffffc2001060c680 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1275
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: FUJITSU MHV2100BH, 00000028, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 0)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 0)
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2100B 0000 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
hda: ATAPI<5>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx
Attempting manual resume
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
et131x: module license 'BSD' taints kernel.
10/100/1000 Base-T Ethernet Driver for the ET1310, v1.2.3 01/31/2006 15:40:00 by Agere Systems, http://www.agere.com
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
Yenta: CardBus bridge found at 0000:06:00.0 [1854:005f]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:06:00.0, mfunc 0x01001002, devctl 0x64
intel_rng: FWH not detected
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a
pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
pcmcia: parent PCI bridge Memory window: 0xd8200000 - 0xd82fffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
ACPI: PCI Interrupt 0000:06:00.2[A] -> GSI 16 (level, low) -> IRQ 16
tifm_core: MMC/SD card detected in socket 0:1
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
Bluetooth: HCI USB driver ver 2.9
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
usbcore: registered new interface driver hci_usb
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:06:00.3 [104c:803c] (rev 0)
ACPI: PCI Interrupt 0000:06:00.3[A] -> GSI 16 (level, low) -> IRQ 16
mmc0: SDHCI at 0xd8205800 irq 16 PIO
ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.1dmpr
ipw3945: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:05:00.0 to 64
ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input1
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:0a' and the driver 'parport_pc'
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 5, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
hda_intel: azx_get_response timeout, switching to polling mode...
Adding 3028244k swap on /dev/sda3. Priority:-1 extents:1 across:3028244k
EXT3 FS on sda2, internal journal
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth2: link is not ready
ACPI: Battery Slot [CMB0] (battery present)
ACPI: AC Adapter [AC] (on-line)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
vboxdrv: Trying to deactivate NMI watchdog permanently...
vboxdrv: Successfully done.
eth1: no IPv6 routers present
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8946
[fglrx] Maximum main memory to use for locked dma buffers: 922 MBytes.
[fglrx] module loaded - fglrx 8.38.6 [Jun 22 2007] on minor 0
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[fglrx:drm_parse_option] *ERROR* "agplock" is not a valid option
[fglrx] Maximum main memory to use for locked dma buffers: 922 MBytes.
[fglrx] total GART = 130023424
[fglrx] free GART = 114032640
[fglrx] max single GART = 114032640
[fglrx] total LFB = 134086656
[fglrx] free LFB = 99209216
[fglrx] max single LFB = 99209216
[fglrx] total Inv = 0
[fglrx] free Inv = 0
[fglrx] max single Inv = 0
[fglrx] total TIM = 0
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
et131x.ko:WARNING:et131x_ioctl Unhandled IOCTL Code: 0x8b01
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
# dmidecode 2.9
SMBIOS 2.4 present.
30 structures occupying 988 bytes.
Table at 0x000DC010.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Phoenix Technologies LTD
Version: RKYWSF21
Release Date: 11/10/2006
Address: 0xE4B00
Runtime Size: 111872 bytes
ROM Size: 1024 kB
Characteristics:
ISA is supported
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
EDD is supported
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: LG Electronics
Product Name: P1-J150B
Version: Not Applicable
Serial Number: 701KSWK002977
UUID: 80B450F8-B164-0010-94B0-E3E13E4B84D0
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: LG Electronics
Product Name: ROCKY
Version: Not Applicable
Serial Number: Not Applicable
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: LG Electronics
Type: Notebook
Lock: Not Present
Version: N/A
Serial Number: None
Asset Tag: No Asset Tag
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00001234
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: U1
Type: Central Processor
Family: Other
Manufacturer: Intel
ID: F6 06 00 00 FF FB EB BF
Version: Intel(R) Core(TM)2 CPU T7
Voltage: 1.2 V
External Clock: Unknown
Max Speed: 2160 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: Slot 1
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 KB
Maximum Size: 32 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 4096 KB
Maximum Size: 2048 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0007, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot
Type: 32-bit PCI Express
Current Usage: Available
Length: Long
ID: 8
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x0008, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Disabled
Description: HD-Audio
Handle 0x0009, DMI type 11, 5 bytes
OEM Strings
String 1: LG Electronics
String 2: Customer Satisfaction First
Handle 0x000A, DMI type 15, 29 bytes
System Event Log
Area Length: 16 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions
Access Address: 0x0000
Status: Valid, Not Full
Change Token: 0x00000002
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: Single-bit ECC memory error
Data Format 2: Multiple-event
Descriptor 3: Multi-bit ECC memory error
Data Format 3: Multiple-event
Handle 0x000B, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 3 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x000C, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000B
Error Information Handle: No Error
Total Width: 32 bits
Data Width: 32 bits
Size: 512 MB
Form Factor: SODIMM
Set: 1
Locator: M1
Bank Locator: Bank 0
Type: DDR2
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x000D, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000B
Error Information Handle: No Error
Total Width: 32 bits
Data Width: 32 bits
Size: 512 MB
Form Factor: SODIMM
Set: 1
Locator: M2
Bank Locator: Bank 1
Type: DDR2
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x000E, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Array Handle: 0x000B
Partition Width: 0
Handle 0x000F, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x000C
Memory Array Mapped Address Handle: 0x000E
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x0010, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00020000000
Ending Address: 0x0003FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x000D
Memory Array Mapped Address Handle: 0x000E
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x0011, DMI type 23, 13 bytes
System Reset
Status: Enabled
Watchdog Timer: Present
Boot Option: Do Not Reboot
Boot Option On Limit: Do Not Reboot
Reset Count: Unknown
Reset Limit: Unknown
Timer Interval: Unknown
Timeout: Unknown
Handle 0x0012, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Disabled
Keyboard Password Status: Unknown
Administrator Password Status: Disabled
Front Panel Reset Status: Unknown
Handle 0x0013, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: 12-31 23:59:59
Handle 0x0014, DMI type 26, 20 bytes
Voltage Probe
Description: Voltage Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x0015, DMI type 27, 12 bytes
Cooling Device
Temperature Probe Handle: 0x0016
Type: Fan
Status: OK
OEM-specific Information: 0x00000000
Handle 0x0016, DMI type 28, 20 bytes
Temperature Probe
Description: Temperature Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x0017, DMI type 29, 20 bytes
Electrical Current Probe
Description: Electrical Current Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x0018, DMI type 30, 6 bytes
Out-of-band Remote Access
Manufacturer Name: Intel
Inbound Connection: Enabled
Outbound Connection: Disabled
Handle 0x0019, DMI type 32, 20 bytes
System Boot Information
Status: <OUT OF SPEC>
Handle 0x001A, DMI type 129, 16 bytes
OEM-specific Type
Header and Data:
81 10 1A 00 01 01 02 01 00 00 00 01 00 00 08 01
Strings:
Intel_ASF_001
Intel_ASF_001
Handle 0x001B, DMI type 136, 8 bytes
OEM-specific Type
Header and Data:
88 08 1B 00 FF FF 00 00
Strings:
...
..
Handle 0x001C, DMI type 150, 14 bytes
OEM-specific Type
Header and Data:
96 0E 1C 00 01 01 00 00 00 00 00 00 00 00
Strings:
ABSOLUTE(PHOENIX) CLM
Handle 0x001D, DMI type 127, 4 bytes
End Of Table
