Re: Time Problems with 2.6.23-rc1-gf695baf2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wednesday 25 July 2007 07:33, Eric Sesterhenn / Snakebyte wrote:
> * Michal Piotrowski (michal.k.k.piotrowski@xxxxxxxxx) wrote:
> >  On 24/07/07, Eric Sesterhenn / Snakebyte <snakebyte@xxxxxx> wrote:
> > > see second 13 to 510, after pressing it about ten
> > > times, it continues booting.
> > 
> >  Probing IDE interface...
> > 
> >  [   13.867939] VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on
> >  pci0000:00:04.1
> >  [   13.868062]     ide0: BM-DMA at 0xd800-0xd807, BIOS settings:
> >  hda:DMA, hdb:pio
> >  [   13.868268]     ide1: BM-DMA at 0xd808-0xd80f, BIOS settings:
> >  hdc:DMA, hdd:DMA
> >  [   13.868574] Probing IDE interface ide0...
> >  [  387.279576] Clocksource tsc unstable (delta = 370195339890 ns)
> >  [  496.200082] hda: ST340823A, ATA DISK drive
> >  [  510.264511] hda: selected mode 0x44
> >  [  510.264826] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > 
> >  Could you please try to revert these commits
> > 
> >  commit 4099d14322149c7a467e4997b87be4ba8eb78697
> >  commit 6a824c92db4d606c324272c4eed366fb71672440
> >  commit a5d8c5c834d3cabf4b7b477c3f6ee923c25026fc
> 
> reverting these commits didnt change anything at all,
> booting with acpi=off resolved the issue, so i guess it is
> an acpi problem after all.

Maybe yes, maybe no.

> > > > [   13.506890] ACPI Exception (processor_throttling-0084): AE_NOT_FOUND, Evaluating _PTC [20070126]
> > > > [   13.507101] ACPI Exception (processor_throttling-0147): AE_NOT_FOUND, Evaluating _TSS [20070126]

Note that these are just noise -- new code being verbose when looking for an optional feature.

The fact that hitting the power button a bunch of times
to make the system move along suggests some sort of missing interrupt problem --
most likely the timer itself.

[   13.868574] Probing IDE interface ide0...
[  387.279576] Clocksource tsc unstable (delta = 370195339890 ns)

5-minutes -- a long probe:-)

> CONFIG_NO_HZ=y

does CONFIG_NO_HZ=n make a difference?

> CONFIG_HIGH_RES_TIMERS=y

does CONFIG_HIGH_RES_TIMERS=n make a difference?

does "irqpoll" make any difference?
does "notsc" make any difference?
does "idle=poll" make any difference?

cheers,
-Len
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux