Applied.
thanks,
-Len
On Tuesday 29 May 2007 08:42, Alexey Starikovskiy wrote:
> Signed-off-by: Alexey Starikovskiy <aystarik@xxxxxxxxx>
> ---
>
> drivers/acpi/ec.c | 20 ++++++--------------
> 1 files changed, 6 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
> index 5534b23..ffb8361 100644
> --- a/drivers/acpi/ec.c
> +++ b/drivers/acpi/ec.c
> @@ -39,20 +39,19 @@
> #include <acpi/acpi_drivers.h>
> #include <acpi/actypes.h>
>
> -#define _COMPONENT ACPI_EC_COMPONENT
> -ACPI_MODULE_NAME("ec");
> -#define ACPI_EC_COMPONENT 0x00100000
> #define ACPI_EC_CLASS "embedded_controller"
> #define ACPI_EC_HID "PNP0C09"
> #define ACPI_EC_DEVICE_NAME "Embedded Controller"
> #define ACPI_EC_FILE_INFO "info"
> #undef PREFIX
> #define PREFIX "ACPI: EC: "
> +
> /* EC status register */
> #define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */
> #define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */
> #define ACPI_EC_FLAG_BURST 0x10 /* burst mode */
> #define ACPI_EC_FLAG_SCI 0x20 /* EC-SCI occurred */
> +
> /* EC commands */
> enum ec_command {
> ACPI_EC_COMMAND_READ = 0x80,
> @@ -245,7 +244,7 @@ static int acpi_ec_transaction(struct acpi_ec *ec, u8 command,
>
> status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0, 0);
> if (status) {
> - printk(KERN_DEBUG PREFIX
> + printk(KERN_ERR PREFIX
> "input buffer is not empty, aborting transaction\n");
> goto end;
> }
> @@ -630,10 +629,6 @@ static int acpi_ec_add(struct acpi_device *device)
>
> acpi_ec_add_fs(device);
>
> - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s [%s] (gpe %d) interrupt mode.",
> - acpi_device_name(device), acpi_device_bid(device),
> - (u32) ec->gpe));
> -
> return 0;
> }
>
> @@ -718,9 +713,6 @@ static int acpi_ec_start(struct acpi_device *device)
> if (!ec)
> return -EINVAL;
>
> - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "gpe=0x%02lx, ports=0x%2lx,0x%2lx",
> - ec->gpe, ec->command_addr, ec->data_addr));
> -
> /* Boot EC is already working */
> if (ec == boot_ec)
> return 0;
> @@ -779,8 +771,8 @@ ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval)
>
> ec->handle = handle;
>
> - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "GPE=0x%02lx, ports=0x%2lx, 0x%2lx",
> - ec->gpe, ec->command_addr, ec->data_addr));
> + printk(KERN_INFO PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx",
> + ec->gpe, ec->command_addr, ec->data_addr);
>
> return AE_CTRL_TERMINATE;
> }
> @@ -803,7 +795,7 @@ int __init acpi_ec_ecdt_probe(void)
> if (ACPI_FAILURE(status))
> goto error;
>
> - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found ECDT"));
> + printk(KERN_INFO PREFIX "EC description table is found, configuring boot EC\n");
>
> boot_ec->command_addr = ecdt_ptr->control.address;
> boot_ec->data_addr = ecdt_ptr->data.address;
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
