From: Henrique de Moraes Holschuh <hmh@xxxxxxxxxx>
The initial version of the thinkpad-acpi sysfs interface (not yet released
in any stable mainline kernel) made liberal use of named sysfs groups, in
order to get the attributes more organized.
This proved to be a really bad design decision. Maybe if attribute groups
were as flexible as a real directory, and if binary attributes were not
second-class citizens, the idea of subdirs and named groups would not have
been so bad.
This patch makes all the thinkpad-acpi sysfs groups anonymous (thus
removing the subdirs), adds the former group names as a prefix (so that
hotkey/enable becomes hotkey_enable for example), and updates the
documentation.
These changes will make the thinkpad-acpi sysfs ABI a lot easier to
maintain.
Signed-off-by: Henrique de Moraes Holschuh <hmh@xxxxxxxxxx>
Signed-off-by: Len Brown <len.brown@xxxxxxxxx>
---
Documentation/thinkpad-acpi.txt | 25 +++++++++++--------------
drivers/misc/thinkpad_acpi.c | 17 +++++++----------
drivers/misc/thinkpad_acpi.h | 6 ------
3 files changed, 18 insertions(+), 30 deletions(-)
diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt
index 2d48033..9e6b94f 100644
--- a/Documentation/thinkpad-acpi.txt
+++ b/Documentation/thinkpad-acpi.txt
@@ -138,7 +138,7 @@ Hot keys
--------
procfs: /proc/acpi/ibm/hotkey
-sysfs device attribute: hotkey/*
+sysfs device attribute: hotkey_*
Without this driver, only the Fn-F4 key (sleep button) generates an
ACPI event. With the driver loaded, the hotkey feature enabled and the
@@ -196,10 +196,7 @@ The following commands can be written to the /proc/acpi/ibm/hotkey file:
sysfs notes:
- The hot keys attributes are in a hotkey/ subdirectory off the
- thinkpad device.
-
- bios_enabled:
+ hotkey_bios_enabled:
Returns the status of the hot keys feature when
thinkpad-acpi was loaded. Upon module unload, the hot
key feature status will be restored to this value.
@@ -207,19 +204,19 @@ sysfs notes:
0: hot keys were disabled
1: hot keys were enabled
- bios_mask:
+ hotkey_bios_mask:
Returns the hot keys mask when thinkpad-acpi was loaded.
Upon module unload, the hot keys mask will be restored
to this value.
- enable:
+ hotkey_enable:
Enables/disables the hot keys feature, and reports
current status of the hot keys feature.
0: disables the hot keys feature / feature disabled
1: enables the hot keys feature / feature enabled
- mask:
+ hotkey_mask:
bit mask to enable ACPI event generation for each hot
key (see above). Returns the current status of the hot
keys mask, and allows one to modify it.
@@ -229,7 +226,7 @@ Bluetooth
---------
procfs: /proc/acpi/ibm/bluetooth
-sysfs device attribute: bluetooth/enable
+sysfs device attribute: bluetooth_enable
This feature shows the presence and current state of a ThinkPad
Bluetooth device in the internal ThinkPad CDC slot.
@@ -244,7 +241,7 @@ If Bluetooth is installed, the following commands can be used:
Sysfs notes:
If the Bluetooth CDC card is installed, it can be enabled /
- disabled through the "bluetooth/enable" thinkpad-acpi device
+ disabled through the "bluetooth_enable" thinkpad-acpi device
attribute, and its current status can also be queried.
enable:
@@ -252,7 +249,7 @@ Sysfs notes:
1: enables Bluetooth / Bluetooth is enabled.
Note: this interface will be probably be superseeded by the
- generic rfkill class.
+ generic rfkill class, so it is NOT to be considered stable yet.
Video output control -- /proc/acpi/ibm/video
--------------------------------------------
@@ -898,7 +895,7 @@ EXPERIMENTAL: WAN
-----------------
procfs: /proc/acpi/ibm/wan
-sysfs device attribute: wwan/enable
+sysfs device attribute: wwan_enable
This feature is marked EXPERIMENTAL because the implementation
directly accesses hardware registers and may not work as expected. USE
@@ -921,7 +918,7 @@ If the W-WAN card is installed, the following commands can be used:
Sysfs notes:
If the W-WAN card is installed, it can be enabled /
- disabled through the "wwan/enable" thinkpad-acpi device
+ disabled through the "wwan_enable" thinkpad-acpi device
attribute, and its current status can also be queried.
enable:
@@ -929,7 +926,7 @@ Sysfs notes:
1: enables WWAN card / WWAN card is enabled.
Note: this interface will be probably be superseeded by the
- generic rfkill class.
+ generic rfkill class, so it is NOT to be considered stable yet.
Multiple Commands, Module Parameters
------------------------------------
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 6c36a55..95c0b96 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -740,7 +740,7 @@ static ssize_t hotkey_enable_store(struct device *dev,
}
static struct device_attribute dev_attr_hotkey_enable =
- __ATTR(enable, S_IWUSR | S_IRUGO,
+ __ATTR(hotkey_enable, S_IWUSR | S_IRUGO,
hotkey_enable_show, hotkey_enable_store);
/* sysfs hotkey mask --------------------------------------------------- */
@@ -775,7 +775,7 @@ static ssize_t hotkey_mask_store(struct device *dev,
}
static struct device_attribute dev_attr_hotkey_mask =
- __ATTR(mask, S_IWUSR | S_IRUGO,
+ __ATTR(hotkey_mask, S_IWUSR | S_IRUGO,
hotkey_mask_show, hotkey_mask_store);
/* sysfs hotkey bios_enabled ------------------------------------------- */
@@ -787,7 +787,7 @@ static ssize_t hotkey_bios_enabled_show(struct device *dev,
}
static struct device_attribute dev_attr_hotkey_bios_enabled =
- __ATTR(bios_enabled, S_IRUGO, hotkey_bios_enabled_show, NULL);
+ __ATTR(hotkey_bios_enabled, S_IRUGO, hotkey_bios_enabled_show, NULL);
/* sysfs hotkey bios_mask ---------------------------------------------- */
static ssize_t hotkey_bios_mask_show(struct device *dev,
@@ -798,7 +798,7 @@ static ssize_t hotkey_bios_mask_show(struct device *dev,
}
static struct device_attribute dev_attr_hotkey_bios_mask =
- __ATTR(bios_mask, S_IRUGO, hotkey_bios_mask_show, NULL);
+ __ATTR(hotkey_bios_mask, S_IRUGO, hotkey_bios_mask_show, NULL);
/* --------------------------------------------------------------------- */
@@ -824,8 +824,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
str_supported(tp_features.hotkey));
if (tp_features.hotkey) {
- hotkey_dev_attributes = create_attr_set(4,
- TPACPI_HOTKEY_SYSFS_GROUP);
+ hotkey_dev_attributes = create_attr_set(4, NULL);
if (!hotkey_dev_attributes)
return -ENOMEM;
res = add_to_attr_set(hotkey_dev_attributes,
@@ -1050,7 +1049,7 @@ static ssize_t bluetooth_enable_store(struct device *dev,
}
static struct device_attribute dev_attr_bluetooth_enable =
- __ATTR(enable, S_IWUSR | S_IRUGO,
+ __ATTR(bluetooth_enable, S_IWUSR | S_IRUGO,
bluetooth_enable_show, bluetooth_enable_store);
/* --------------------------------------------------------------------- */
@@ -1061,7 +1060,6 @@ static struct attribute *bluetooth_attributes[] = {
};
static const struct attribute_group bluetooth_attr_group = {
- .name = TPACPI_BLUETH_SYSFS_GROUP,
.attrs = bluetooth_attributes,
};
@@ -1215,7 +1213,7 @@ static ssize_t wan_enable_store(struct device *dev,
}
static struct device_attribute dev_attr_wan_enable =
- __ATTR(enable, S_IWUSR | S_IRUGO,
+ __ATTR(wwan_enable, S_IWUSR | S_IRUGO,
wan_enable_show, wan_enable_store);
/* --------------------------------------------------------------------- */
@@ -1226,7 +1224,6 @@ static struct attribute *wan_attributes[] = {
};
static const struct attribute_group wan_attr_group = {
- .name = TPACPI_WAN_SYSFS_GROUP,
.attrs = wan_attributes,
};
diff --git a/drivers/misc/thinkpad_acpi.h b/drivers/misc/thinkpad_acpi.h
index 440145a..72d62f2 100644
--- a/drivers/misc/thinkpad_acpi.h
+++ b/drivers/misc/thinkpad_acpi.h
@@ -278,8 +278,6 @@ static int beep_write(char *buf);
* Bluetooth subdriver
*/
-#define TPACPI_BLUETH_SYSFS_GROUP "bluetooth"
-
enum {
/* ACPI GBDC/SBDC bits */
TP_ACPI_BLUETOOTH_HWPRESENT = 0x01, /* Bluetooth hw available */
@@ -416,8 +414,6 @@ static int fan_write_cmd_watchdog(const char *cmd, int *rc);
* Hotkey subdriver
*/
-#define TPACPI_HOTKEY_SYSFS_GROUP "hotkey"
-
static int hotkey_orig_status;
static int hotkey_orig_mask;
@@ -553,8 +549,6 @@ static int volume_write(char *buf);
* Wan subdriver
*/
-#define TPACPI_WAN_SYSFS_GROUP "wwan"
-
enum {
/* ACPI GWAN/SWAN bits */
TP_ACPI_WANCARD_HWPRESENT = 0x01, /* Wan hw available */
--
1.5.2.146.gb75c6
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
