On Saturday 19 May 2007, Mattia Dongili wrote:
> On Sat, May 19, 2007 at 12:04:13AM -0700, Andrew Morton wrote:
> > On Sat, 19 May 2007 15:48:29 +0900 Mattia Dongili <malattia@xxxxxxxx> wrote:
> >
> > > On Fri, May 18, 2007 at 12:22:40AM -0700, Andrew Morton wrote:
> > > > On Fri, 18 May 2007 16:15:24 +0900 Mattia Dongili <malattia@xxxxxxxx> wrote:
> > > >
> > > > > Hello,
> > > > >
> > > > > After finally catching fw-{ohci,core} to be problematic during resume,
> > > > > I'm now experiencing an immediate resume after suspending.
> > > > >
> > > > > 2.6.21-rc7-mm* didn't even suspend, my last known suspend-and-resuming
> > > > > kernel was 2.6.21-rc5-mm3 (I know one other vaio SZ user could STR with
> > > > > 2.6.21-rc6-mm* after the cpuidle fixes).
> > > > >
> > > > > my .config is: http://oioio.altervista.org/linux/config-2.6.22-rc1-mm1-1
> > > > > and a str cycle with PM_DEBUG=y:
> > > > > http://oioio.altervista.org/linux/dmesg-SRT-immediately-resumes.txt
Can you also provide /proc/acpi/wakeup and /proc/bus/usb/devices?
Plus "ethool eth0" and "ethtool -i eth0"?
And, for a bit more info, the output of the appended script.
(That's all *with* the patch listed below -- not reverted.)
> > > ...
> > >
>
> but very very close:
> acpi-driver-model-flags-and-platform_enable_wake.patch
Which only affects PCI devices at this time, FWIW ...
This is a symptom of a device or driver misbehaving. You can
work around that; update the relevant /sys/devices/.../power/wakeup
value(s) to "disabled", pending a driver bugfix (or workaround).
In fact, you could turn them all off (see appended diagnostic
script) then turn them on one at a time to highlight problems
Reverting that patch just papers over the problem...
My suspicion, based on the dmesg and seeing what drivers actually
try to enable wakeup, would be the 'sky2' driver. The other two
obvious candidates are EHCI (which behaves for me on non-Intel
hardware) and UHCI ... but USB has had a fair amount of testing
in terms of wakeup mechanisms, so that seems a bit less likely
to me (assuming no hardware bugs).
However, since after reverting the patch above you still saw
other problems (immediate re-suspend) I'm suspecting this isn't
a single simple problem you're finding.
- Dave
========== CUT HERE
#!/bin/bash
# show the wakeup-capable devices and what's enabled/disabled
# class_label *:* ==> $type
class_label ()
{
case $1 in
# recognize common types of wakeup-capable devices
i2c-dev:*) type="smbus "; return 0;;
input:*) type="input "; return 0;;
mmc_host:*) type="mmc_host "; return 0;;
net:eth*) type="lan "; return 0;;
net:*) type="net "; return 0;;
pcmcia_socket:*)type="pcmcia "; return 0;;
rtc:*) type="rtc "; return 0;;
sound:*) type="modem "; return 0;;
tty:*) type="tty "; return 0;;
usb_host:*) type="usb_host "; return 0;;
esac
return 1
}
# interface_label $PATH ==> $type
interface_label ()
{
for F in $(cd $1 >/dev/null 2>&1 ; echo *:*)
do
class_label $F && return
done
}
# devtype $PATH ==> $type
devtype ()
{
local F T
# fixed length, currently ten spaces
type=""
for F in $(cd $1 >/dev/null 2>&1 ; echo *:*)
do
if [ ! -d "$1/$F" ]
then
break;
fi
# is this a usb interface?
if [ -f $1/$F/bInterfaceClass ]
then
interface_label $1/$F && return
fi
case $F in
# use interface's label if possible, else generic
usb_device:*)
read T < $1/maxchild
if [ 0 -lt $T ]
then
type="hub "
return
fi
type="(usb) "
continue;;
*:*) class_label $F && return ;;
esac
done
if [ "$type" = "" ]
then
for T in $(cd $1 >/dev/null 2>&1 ; echo fw-host*/ieee1394_host:*)
do
if [ ! -L "$1/$T" ]
then
break;
fi
type="firewire "
return
done
fi
if [ "$type" = "" ]
then
type=" "
fi
}
cd /sys/devices
for F in $(find * -name 'wakeup')
do
# F=.../power/wakeup
read value < $F
if [ "$value" = "" ]
then
continue
fi
# F=...
F=$(dirname $(dirname $F))
devtype $F
# for each entry that actually supports wakeup, one line with:
# - device type (if recognized)
# - wake on/OFF
# - /sys/devices/... path
case "$value" in
"disabled") echo "$type OFF $F" ;;
"enabled") echo "$type on $F" ;;
esac
done
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
