Hi everyone, After reading "CPU offline but power consumption increased?" lkml thread I wanted to test CPU on-off on my Turion 64 X2. I found out something strange, related to the way CPU is turned off and back on. I don't know if this is a kernel bug, but looks pretty suspicious. Comments can be found inline. **** Using Kernel 2.6.20.5 **** The initial situation, both cores running at 1.6 GHz, full info displayed **** /proc/cpuinfo # cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 72 model name : AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping : 2 cpu MHz : 1600.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8legacy ts fid vid ttp tm stc bogomips : 3195.47 clflush size : 64 processor : 1 vendor_id : AuthenticAMD cpu family : 15 model : 72 model name : AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping : 2 cpu MHz : 1600.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8legacy ts fid vid ttp tm stc bogomips : 3195.47 clflush size : 64 **** The initial situation, both cores running at 1.6 GHz, full info displayed **** cpufreq-info # cpufreq-info cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006 Report errors and bugs to linux@xxxxxxxx, please. analyzing CPU 0: driver: powernow-k8 CPUs which need to switch frequency at the same time: 0 1 hardware limits: 800 MHz - 1.60 GHz available frequency steps: 1.60 GHz, 800 MHz available cpufreq governors: powersave, performance current policy: frequency should be within 800 MHz and 1.60 GHz. The governor "performance" may decide which speed to use within this range. current CPU frequency is 1.60 GHz (asserted by call to hardware). analyzing CPU 1: driver: powernow-k8 CPUs which need to switch frequency at the same time: 0 1 hardware limits: 800 MHz - 1.60 GHz available frequency steps: 1.60 GHz, 800 MHz available cpufreq governors: powersave, performance current policy: frequency should be within 800 MHz and 1.60 GHz. The governor "performance" may decide which speed to use within this range. current CPU frequency is 1.60 GHz (asserted by call to hardware). **** 2nd core is shut down # echo 0 > /sys/devices/system/cpu/cpu1/online **** Only 2nd core is now running, at 800 MHz, half bogomips **** /proc/cpuinfo # cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 72 model name : AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping : 2 cpu MHz : 800.000 cache size : 512 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni cx16 lahf_lm cmp_legacy svm cr8legacy ts fid vid ttp tm stc bogomips : 1597.73 clflush size : 64 **** Only 2nd core is now running, at 800 MHz, half bogomips **** cpufreq-info # cpufreq-info cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006 Report errors and bugs to linux@xxxxxxxx, please. analyzing CPU 0: driver: powernow-k8 CPUs which need to switch frequency at the same time: 0 hardware limits: 800 MHz - 1.60 GHz available frequency steps: 1.60 GHz, 800 MHz available cpufreq governors: powersave, performance current policy: frequency should be within 800 MHz and 1.60 GHz. The governor "performance" may decide which speed to use within this range. current CPU frequency is 800 MHz (asserted by call to hardware). **** Turning 2nd core back on # echo 1 > /sys/devices/system/cpu/cpu1/online **** /proc/cpuinfo shows again info about 2nd core **** but some details are missing about 2nd core, such as "cache size" **** (others might also be missing) - this makes me think something might not **** be working right (cache not used maybe?) **** Bogomips is still half (I'm not sure if this is directly proportional **** with CPU frequency or with number of cores) # cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 72 model name : AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping : 2 cpu MHz : 800.000 cache size : 512 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8legacy ts fid vid ttp tm stc bogomips : 1597.73 clflush size : 64 processor : 1 vendor_id : AuthenticAMD cpu family : 15 model : 72 model name : AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping : 2 cpu MHz : 1596.093 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8legacy ts fid vid ttp tm stc bogomips : 1596.01 clflush size : 64 **** cpufreq-info shows info only about 1st core # cpufreq-info cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006 Report errors and bugs to linux@xxxxxxxx, please. analyzing CPU 0: driver: powernow-k8 CPUs which need to switch frequency at the same time: 0 hardware limits: 800 MHz - 1.60 GHz available frequency steps: 1.60 GHz, 800 MHz available cpufreq governors: powersave, performance current policy: frequency should be within 800 MHz and 1.60 GHz. The governor "performance" may decide which speed to use within this range. current CPU frequency is 800 MHz (asserted by call to hardware). analyzing CPU 1: no or unknown cpufreq driver is active on this CPU **** reloading powernow-k8 driver, to check if cpufreq-info gets back working # rmmod powernow-k8 # modprobe powernow-k8 FATAL: Error inserting powernow_k8 (/lib/modules/2.6.20-ARCH/kernel/arch/i386/kernel/cpu/cpufreq/powernow-k8.ko): No such device Many thanks, Mircea -- http://mircea.bardac.net - To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
