> Quoting Adrian Bunk <bunk@xxxxxxxxx>: > Subject: [2/6] 2.6.21-rc2: known regressions > > Subject : ThinkPad T60: no screen after suspend to RAM > References : http://lkml.org/lkml/2007/2/22/391 > Submitter : Michael S. Tsirkin <mst@xxxxxxxxxxxxxx> > Status : unknown Here's the status with -rc3: better, but still does not work as well as 2.6.20. 1. Switching to console VT, and running s2ram, I am able to resume to console (I have not tested with echo mem > /sys/power/state yet, both work OK with 2.6.20) This seems to take about as long as with 2.6.20. During this time, I see some messages on console (see attached log) 2. First disk access after resume takes a couple of minutes (seemed instant with 2.6.20) during this time no new messages show on console 3. When I switch to X (CTRL-ALT-F7), X hangs after drawing a couple of windows after waiting for some 10 min, I rebooted. no new messages showed up in /var/log/messages log attached -- MST
Mar 8 08:47:20 localhost kernel: Inspecting /boot/System.map-2.6.21-rc3-work Mar 8 08:47:20 localhost kernel: Loaded 31265 symbols from /boot/System.map-2.6.21-rc3-work. Mar 8 08:47:20 localhost kernel: Symbols match kernel version 2.6.21. Mar 8 08:47:20 localhost kernel: No module symbols loaded - kernel modules not enabled. Mar 8 08:47:20 localhost kernel: 1 Mar 8 08:47:20 localhost kernel: [ 15.317823] ata2: SATA link down (SStatus 0 SControl 0) Mar 8 08:47:20 localhost kernel: [ 15.317897] scsi2 : ahci Mar 8 08:47:20 localhost kernel: [ 15.379836] ata3: SATA link down (SStatus 0 SControl 0) Mar 8 08:47:20 localhost kernel: [ 15.379909] scsi3 : ahci Mar 8 08:47:20 localhost kernel: [ 15.441854] ata4: SATA link down (SStatus 0 SControl 0) Mar 8 08:47:20 localhost kernel: [ 15.441999] scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4I PQ: 0 ANSI: 5 Mar 8 08:47:20 localhost kernel: [ 15.442216] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) Mar 8 08:47:20 localhost kernel: [ 15.442292] sda: Write Protect is off Mar 8 08:47:20 localhost kernel: [ 15.443138] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 8 08:47:20 localhost kernel: [ 15.443256] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) Mar 8 08:47:20 localhost kernel: [ 15.443330] sda: Write Protect is off Mar 8 08:47:20 localhost kernel: [ 15.443406] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 8 08:47:20 localhost kernel: [ 15.443490] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > Mar 8 08:47:20 localhost kernel: [ 15.845145] sd 0:0:0:0: Attached scsi disk sda Mar 8 08:47:20 localhost kernel: [ 15.845290] sd 0:0:0:0: Attached scsi generic sg0 type 0 Mar 8 08:47:20 localhost kernel: [ 15.845797] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 21 Mar 8 08:47:20 localhost kernel: [ 15.845946] ehci_hcd 0000:00:1d.7: EHCI Host Controller Mar 8 08:47:20 localhost kernel: [ 15.846106] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Mar 8 08:47:20 localhost kernel: [ 15.846229] ehci_hcd 0000:00:1d.7: debug port 1 Mar 8 08:47:20 localhost kernel: [ 15.846315] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xee444000 Mar 8 08:47:20 localhost kernel: [ 15.850269] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Mar 8 08:47:20 localhost kernel: [ 15.850508] usb usb1: configuration #1 chosen from 1 choice Mar 8 08:47:20 localhost kernel: [ 15.850630] hub 1-0:1.0: USB hub found Mar 8 08:47:20 localhost kernel: [ 15.850697] hub 1-0:1.0: 8 ports detected Mar 8 08:47:20 localhost kernel: [ 15.862005] USB Universal Host Controller Interface driver v3.0 Mar 8 08:47:20 localhost kernel: [ 15.862135] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20 Mar 8 08:47:20 localhost kernel: [ 15.862268] uhci_hcd 0000:00:1d.0: UHCI Host Controller Mar 8 08:47:20 localhost kernel: [ 15.862381] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Mar 8 08:47:20 localhost kernel: [ 15.862484] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820 Mar 8 08:47:20 localhost kernel: [ 15.862702] usb usb2: configuration #1 chosen from 1 choice Mar 8 08:47:20 localhost kernel: [ 15.862821] hub 2-0:1.0: USB hub found Mar 8 08:47:20 localhost kernel: [ 15.862887] hub 2-0:1.0: 2 ports detected Mar 8 08:47:20 localhost kernel: [ 15.892543] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 22 Mar 8 08:47:20 localhost kernel: [ 15.892676] uhci_hcd 0000:00:1d.1: UHCI Host Controller Mar 8 08:47:20 localhost kernel: [ 15.892789] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Mar 8 08:47:20 localhost kernel: [ 15.892894] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00001840 Mar 8 08:47:20 localhost kernel: [ 15.893113] usb usb3: configuration #1 chosen from 1 choice Mar 8 08:47:20 localhost kernel: [ 15.893229] hub 3-0:1.0: USB hub found Mar 8 08:47:20 localhost kernel: [ 15.893296] hub 3-0:1.0: 2 ports detected Mar 8 08:47:20 localhost kernel: [ 15.933182] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 23 Mar 8 08:47:20 localhost kernel: [ 15.933314] uhci_hcd 0000:00:1d.2: UHCI Host Controller Mar 8 08:47:20 localhost kernel: [ 15.933427] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Mar 8 08:47:20 localhost kernel: [ 15.933577] uhci_hcd 0000:00:1d.2: irq 23, io base 0x00001860 Mar 8 08:47:20 localhost kernel: [ 15.933797] usb usb4: configuration #1 chosen from 1 choice Mar 8 08:47:20 localhost kernel: [ 15.933915] hub 4-0:1.0: USB hub found Mar 8 08:47:20 localhost kernel: [ 15.933981] hub 4-0:1.0: 2 ports detected Mar 8 08:47:20 localhost kernel: [ 15.976494] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 21 Mar 8 08:47:20 localhost kernel: [ 15.976627] uhci_hcd 0000:00:1d.3: UHCI Host Controller Mar 8 08:47:20 localhost kernel: [ 15.976740] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Mar 8 08:47:20 localhost kernel: [ 15.976843] uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001880 Mar 8 08:47:20 localhost kernel: [ 15.977060] usb usb5: configuration #1 chosen from 1 choice Mar 8 08:47:20 localhost kernel: [ 15.977196] hub 5-0:1.0: USB hub found Mar 8 08:47:20 localhost kernel: [ 15.977263] hub 5-0:1.0: 2 ports detected Mar 8 08:47:20 localhost kernel: [ 16.040824] Initializing USB Mass Storage driver... Mar 8 08:47:20 localhost kernel: [ 16.157808] usb 5-2: new full speed USB device using uhci_hcd and address 2 Mar 8 08:47:20 localhost kernel: [ 16.221329] usb 5-2: configuration #1 chosen from 1 choice Mar 8 08:47:20 localhost kernel: [ 16.224625] usbcore: registered new interface driver usb-storage Mar 8 08:47:20 localhost kernel: [ 16.224692] USB Mass Storage support registered. Mar 8 08:47:20 localhost kernel: [ 16.224886] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 Mar 8 08:47:20 localhost kernel: [ 16.233142] serio: i8042 KBD port at 0x60,0x64 irq 1 Mar 8 08:47:20 localhost kernel: [ 16.233211] serio: i8042 AUX port at 0x60,0x64 irq 12 Mar 8 08:47:20 localhost kernel: [ 16.233366] mice: PS/2 mouse device common for all mice Mar 8 08:47:20 localhost kernel: [ 16.233716] Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Tue Mar 06 13:10:00 2007 UTC). Mar 8 08:47:20 localhost kernel: [ 16.234221] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22 Mar 8 08:47:20 localhost kernel: [ 16.236937] input: AT Translated Set 2 keyboard as /class/input/input3 Mar 8 08:47:20 localhost kernel: [ 16.444361] ALSA device list: Mar 8 08:47:20 localhost kernel: [ 16.444428] #0: HDA Intel at 0xee240000 irq 22 Mar 8 08:47:20 localhost kernel: [ 16.444525] nf_conntrack version 0.5.0 (7168 buckets, 57344 max) Mar 8 08:47:20 localhost kernel: [ 16.444736] ip_tables: (C) 2000-2006 Netfilter Core Team Mar 8 08:47:20 localhost kernel: [ 16.444809] TCP cubic registered Mar 8 08:47:20 localhost kernel: [ 16.444887] NET: Registered protocol family 1 Mar 8 08:47:20 localhost kernel: [ 16.444953] NET: Registered protocol family 17 Mar 8 08:47:20 localhost kernel: [ 16.445019] ieee80211: 802.11 data/management/control stack, git-1.1.13 Mar 8 08:47:20 localhost kernel: [ 16.445087] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx> Mar 8 08:47:20 localhost kernel: [ 16.445185] Starting balanced_irq Mar 8 08:47:20 localhost kernel: [ 16.445254] Using IPI No-Shortcut mode Mar 8 08:47:20 localhost kernel: [ 16.472663] kjournald starting. Commit interval 5 seconds Mar 8 08:47:20 localhost kernel: [ 16.472735] EXT3-fs: mounted filesystem with ordered data mode. Mar 8 08:47:20 localhost kernel: [ 16.472864] VFS: Mounted root (ext3 filesystem) readonly. Mar 8 08:47:20 localhost kernel: [ 16.473029] Freeing unused kernel memory: 184k freed Mar 8 08:47:20 localhost kernel: [ 16.473122] Write protecting the kernel read-only data: 902k Mar 8 08:47:20 localhost kernel: [ 24.658491] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Mar 8 08:47:20 localhost kernel: [ 24.658576] Copyright (c) 1999-2006 Intel Corporation. Mar 8 08:47:20 localhost kernel: [ 24.658761] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 20 Mar 8 08:47:20 localhost kernel: [ 24.733801] e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:41:54:6c:47 Mar 8 08:47:20 localhost kernel: [ 24.815441] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection Mar 8 08:47:20 localhost kernel: [ 25.282292] Adding 1951824k swap on /dev/sda6. Priority:-1 extents:1 across:1951824k Mar 8 08:47:20 localhost kernel: [ 25.343370] EXT3 FS on sda3, internal journal Mar 8 08:47:20 localhost kernel: [ 25.697608] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 Mar 8 08:47:20 localhost kernel: [ 25.697710] serio: Synaptics pass-through port at isa0060/serio1/input0 Mar 8 08:47:20 localhost kernel: [ 25.742946] input: SynPS/2 Synaptics TouchPad as /class/input/input4 Mar 8 08:47:20 localhost kernel: [ 30.419349] NTFS volume version 3.1. Mar 8 08:47:20 localhost kernel: [ 31.156204] IBM TrackPoint firmware: 0x0e, buttons: 3/3 Mar 8 08:47:20 localhost kernel: [ 31.426442] input: TPPS/2 IBM TrackPoint as /class/input/input5 Mar 8 08:47:22 localhost hpiod: 0.9.7 accepting connections at 50899... Mar 8 08:47:26 localhost kernel: [ 39.389386] [drm] Initialized i915 1.6.0 20060119 on minor 0 Mar 8 08:48:07 localhost kernel: <1] pcieport-driver 0000:00:1c.3: LATE suspend Mar 8 08:48:07 localhost kernel: [ 2.183443] Intel machine check architecture supported. Mar 8 08:48:07 localhost kernel: [ 2.183451] Intel machine check reporting enabled on CPU#0. Mar 8 08:48:07 localhost kernel: [ 2.183982] Enabling non-boot CPUs ... Mar 8 08:48:07 localhost kernel: [ 2.321035] SMP alternatives: switching to SMP code Mar 8 08:48:07 localhost kernel: [ 2.321241] Booting processor 1/1 eip 3000 Mar 8 08:48:07 localhost kernel: [ 2.332199] Initializing CPU#1 Mar 8 08:48:07 localhost kernel: [ 3.143727] Calibrating delay using timer specific routine.. 20089.15 BogoMIPS (lpj=100445793) Mar 8 08:48:07 localhost kernel: [ 3.143746] monitor/mwait feature present. Mar 8 08:48:07 localhost kernel: [ 3.143751] CPU: L1 I cache: 32K, L1 D cache: 32K Mar 8 08:48:07 localhost kernel: [ 3.143755] CPU: L2 cache: 2048K Mar 8 08:48:07 localhost kernel: [ 3.143759] CPU: Physical Processor ID: 0 Mar 8 08:48:07 localhost kernel: [ 3.143761] CPU: Processor Core ID: 1 Mar 8 08:48:07 localhost kernel: [ 3.143774] Intel machine check architecture supported. Mar 8 08:48:07 localhost kernel: [ 3.143783] Intel machine check reporting enabled on CPU#1. Mar 8 08:48:07 localhost kernel: [ 3.144104] CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 Mar 8 08:48:07 localhost kernel: [ 3.144892] speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated. Mar 8 08:48:07 localhost kernel: [ 3.144896] Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead. Mar 8 08:48:07 localhost kernel: [ 3.144936] CPU1 is up Mar 8 08:48:07 localhost kernel: [ 3.440273] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20 Mar 8 08:48:07 localhost kernel: [ 3.527272] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22 Mar 8 08:48:07 localhost kernel: [ 3.912917] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20 Mar 8 08:48:07 localhost kernel: [ 3.912966] usb usb2: root hub lost power or was reset Mar 8 08:48:07 localhost kernel: [ 3.912988] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 22 Mar 8 08:48:07 localhost kernel: [ 3.913036] usb usb3: root hub lost power or was reset Mar 8 08:48:07 localhost kernel: [ 3.913055] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 23 Mar 8 08:48:07 localhost kernel: [ 3.913102] usb usb4: root hub lost power or was reset Mar 8 08:48:07 localhost kernel: [ 3.913120] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 21 Mar 8 08:48:07 localhost kernel: [ 3.913168] usb usb5: root hub lost power or was reset Mar 8 08:48:07 localhost kernel: [ 3.914015] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 21 Mar 8 08:48:07 localhost kernel: [ 3.914205] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 20 Mar 8 08:48:07 localhost kernel: [ 3.914407] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 20 Mar 8 08:48:07 localhost kernel: [ 3.922880] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 20 Mar 8 08:48:07 localhost kernel: [ 3.928614] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 20 Mar 8 08:48:07 localhost kernel: [ 3.928638] pnp: Device 00:08 does not support activation. Mar 8 08:48:07 localhost kernel: [ 3.928641] pnp: Device 00:09 does not support activation. Mar 8 08:48:07 localhost kernel: [ 4.209165] ata2: SATA link down (SStatus 0 SControl 0) Mar 8 08:48:07 localhost kernel: [ 4.209179] ata3: SATA link down (SStatus 0 SControl 0) Mar 8 08:48:07 localhost kernel: [ 4.209191] ata4: SATA link down (SStatus 0 SControl 0) Mar 8 08:48:07 localhost kernel: [ 4.849894] atkbd.c: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0). Mar 8 08:48:07 localhost kernel: [ 4.849896] atkbd.c: Use 'setkeycodes e060 <keycode>' to make it known. Mar 8 08:48:07 localhost kernel: [ 4.850297] atkbd.c: Unknown key pressed (translated set 2, code 0x63 on isa0060/serio0). Mar 8 08:48:07 localhost kernel: [ 4.850300] atkbd.c: Use 'setkeycodes 63 <keycode>' to make it known. Mar 8 08:48:07 localhost kernel: [ 5.826771] Restarting tasks ... <6>usb 5-2: USB disconnect, address 2 Mar 8 08:48:07 localhost kernel: [ 5.839206] done. Mar 8 08:48:07 localhost kernel: [ 6.702776] ata1: waiting for device to spin up (7 secs) Mar 8 08:48:07 localhost kernel: [ 6.775788] usb 5-2: new full speed USB device using uhci_hcd and address 3 Mar 8 08:48:07 localhost kernel: [ 6.866806] usb 5-2: configuration #1 chosen from 1 choice Mar 8 08:48:07 localhost kernel: [ 11.334773] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Mar 8 08:48:07 localhost kernel: [ 11.673734] ata1.00: configured for UDMA/100 Mar 8 08:48:07 localhost kernel: [ 11.696311] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) Mar 8 08:48:07 localhost kernel: [ 11.697691] sda: Write Protect is off Mar 8 08:48:07 localhost kernel: [ 11.708467] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 8 08:48:16 localhost kernel: <>[ 19.841599] button button_power:00: suspend Mar 8 08:48:16 localhost kernel: [ 19.841607] Disabling non-boot CPUs ... Mar 8 08:48:16 localhost kernel: [ 19.847811] Breaking affinity for irq 12 Mar 8 08:48:16 localhost kernel: [ 20.444974] CPU 1 is now offline Mar 8 08:48:16 localhost kernel: [ 20.444980] SMP alternatives: switching to UP code Mar 8 08:48:16 localhost kernel: [ 20.445823] CPU1 is down Mar 8 08:48:16 localhost kernel: [ 2.423903] Intel machine check architecture supported. Mar 8 08:48:16 localhost kernel: [ 2.423911] Intel machine check reporting enabled on CPU#0. Mar 8 08:48:16 localhost kernel: [ 2.424444] Enabling non-boot CPUs ... Mar 8 08:48:16 localhost kernel: [ 2.534642] SMP alternatives: switching to SMP code Mar 8 08:48:16 localhost kernel: [ 2.534847] Booting processor 1/1 eip 3000 Mar 8 08:48:16 localhost kernel: [ 2.545805] Initializing CPU#1 Mar 8 08:48:16 localhost kernel: [ 3.357337] Calibrating delay using timer specific routine.. 20089.13 BogoMIPS (lpj=100445659) Mar 8 08:48:16 localhost kernel: [ 3.357357] monitor/mwait feature present. Mar 8 08:48:16 localhost kernel: [ 3.357362] CPU: L1 I cache: 32K, L1 D cache: 32K Mar 8 08:48:16 localhost kernel: [ 3.357365] CPU: L2 cache: 2048K Mar 8 08:48:16 localhost kernel: [ 3.357369] CPU: Physical Processor ID: 0 Mar 8 08:48:16 localhost kernel: [ 3.357372] CPU: Processor Core ID: 1 Mar 8 08:48:16 localhost kernel: [ 3.357384] Intel machine check architecture supported. Mar 8 08:48:16 localhost kernel: [ 3.357394] Intel machine check reporting enabled on CPU#1. Mar 8 08:48:16 localhost kernel: [ 3.357711] CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 Mar 8 08:48:16 localhost kernel: [ 3.358503] speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated. Mar 8 08:48:16 localhost kernel: [ 3.358507] Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead. Mar 8 08:48:16 localhost kernel: [ 3.358548] CPU1 is up Mar 8 08:48:16 localhost kernel: [ 3.653795] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20 Mar 8 08:48:16 localhost kernel: [ 3.740900] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22 Mar 8 08:48:16 localhost kernel: [ 4.126569] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20 Mar 8 08:48:16 localhost kernel: [ 4.126619] usb usb2: root hub lost power or was reset Mar 8 08:48:16 localhost kernel: [ 4.126639] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 22 Mar 8 08:48:16 localhost kernel: [ 4.126686] usb usb3: root hub lost power or was reset Mar 8 08:48:16 localhost kernel: [ 4.126705] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 23 Mar 8 08:48:16 localhost kernel: [ 4.126752] usb usb4: root hub lost power or was reset Mar 8 08:48:16 localhost kernel: [ 4.126772] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 21 Mar 8 08:48:16 localhost kernel: [ 4.126819] usb usb5: root hub lost power or was reset Mar 8 08:48:16 localhost kernel: [ 4.127659] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 21 Mar 8 08:48:16 localhost kernel: [ 4.127848] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 20 Mar 8 08:48:16 localhost kernel: [ 4.128049] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 20 Mar 8 08:48:16 localhost kernel: [ 4.136510] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 20 Mar 8 08:48:16 localhost kernel: [ 4.142247] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 20 Mar 8 08:48:16 localhost kernel: [ 4.142271] pnp: Device 00:08 does not support activation. Mar 8 08:48:16 localhost kernel: [ 4.142274] pnp: Device 00:09 does not support activation. Mar 8 08:48:16 localhost kernel: [ 4.421975] ata2: SATA link down (SStatus 0 SControl 0) Mar 8 08:48:16 localhost kernel: [ 4.421989] ata3: SATA link down (SStatus 0 SControl 0) Mar 8 08:48:16 localhost kernel: [ 4.422001] ata4: SATA link down (SStatus 0 SControl 0) Mar 8 08:48:16 localhost kernel: [ 5.971047] Restarting tasks ... done. Mar 8 08:48:16 localhost kernel: [ 6.012513] usb 5-2: USB disconnect, address 3 Mar 8 08:48:16 localhost kernel: [ 6.891677] ata1: waiting for device to spin up (7 secs) Mar 8 08:48:16 localhost kernel: [ 6.958587] usb 5-2: new full speed USB device using uhci_hcd and address 4 Mar 8 08:48:16 localhost kernel: [ 7.049506] usb 5-2: configuration #1 chosen from 1 choice Mar 8 08:48:16 localhost kernel: [ 11.547844] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Mar 8 08:48:16 localhost kernel: [ 11.885459] ata1.00: configured for UDMA/100 Mar 8 08:48:16 localhost kernel: [ 11.913910] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) Mar 8 08:48:16 localhost kernel: [ 11.914575] sda: Write Protect is off Mar 8 08:48:16 localhost kernel: [ 11.914868] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 8 08:48:16 localhost shutdown[4092]: shutting down for system halt
