On Sat, 3 Mar 2007 15:14:24 +0000 Ash Milsted <thatistosayiseenem@xxxxxxxxx> wrote: > Hi, > With 2.6.21-rc2-git1 I have a problem with my ps/2 port keyboard - it only works > with one of the following on the command-line: > - nolapic > - irqfixup > - pci=noacpi > Otherwise it gets stuck with the numlock on. > The following options have no effect: > - nohz=off (who knows eh?) > - pci=nomsi > > Here is my lspci: > 00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80) > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge > 00:0a.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01) > 00:0b.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04) > 00:0b.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04) > 00:0b.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04) > 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) > 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) > 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) > 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) > 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) > 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) > 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) > 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] > 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) > 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78) > 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1) > > And here is a boot log without any of those parameters (keyboard fails): > Mar 3 14:38:24 joker syslog-ng[4183]: syslog-ng starting up; version='2.0.0' > Mar 3 14:38:24 joker a0000 (reserved) > Mar 3 14:38:24 joker limit_regions endfor: 00000000000f0000 - 0000000000100000 (reserved) > Mar 3 14:38:24 joker limit_regions endfor: 0000000000100000 - 000000001fff0000 (usable) > Mar 3 14:38:24 joker user-defined physical RAM map: > Mar 3 14:38:24 joker user: 0000000000000000 - 000000000009fc00 (usable) > Mar 3 14:38:24 joker user: 000000000009fc00 - 00000000000a0000 (reserved) > Mar 3 14:38:24 joker user: 00000000000f0000 - 0000000000100000 (reserved) > Mar 3 14:38:24 joker user: 0000000000100000 - 000000001fff0000 (usable) > Mar 3 14:38:24 joker 511MB LOWMEM available. > Mar 3 14:38:24 joker Entering add_active_range(0, 0, 131056) 0 entries of 256 used > Mar 3 14:38:24 joker Zone PFN ranges: > Mar 3 14:38:24 joker DMA 0 -> 4096 > Mar 3 14:38:24 joker Normal 4096 -> 131056 > Mar 3 14:38:24 joker early_node_map[1] active PFN ranges > Mar 3 14:38:24 joker 0: 0 -> 131056 > Mar 3 14:38:24 joker On node 0 totalpages: 131056 > Mar 3 14:38:24 joker DMA zone: 32 pages used for memmap > Mar 3 14:38:24 joker DMA zone: 0 pages reserved > Mar 3 14:38:24 joker DMA zone: 4064 pages, LIFO batch:0 > Mar 3 14:38:24 joker Normal zone: 991 pages used for memmap > Mar 3 14:38:24 joker Normal zone: 125969 pages, LIFO batch:31 > Mar 3 14:38:24 joker DMI 2.3 present. > Mar 3 14:38:24 joker ACPI: RSDP 000FA8C0, 0014 (r0 AMI ) > Mar 3 14:38:24 joker ACPI: RSDT 1FFF0000, 002C (r1 AMIINT VIA_K7 10 MSFT 97) > Mar 3 14:38:24 joker ACPI: FACP 1FFF0030, 0081 (r1 AMIINT VIA_K7 11 MSFT 97) > Mar 3 14:38:24 joker ACPI: DSDT 1FFF0120, 3502 (r1 VIA K7VT4 1000 MSFT 100000D) > Mar 3 14:38:24 joker ACPI: FACS 1FFF8000, 0040 > Mar 3 14:38:24 joker ACPI: APIC 1FFF00C0, 0054 (r1 AMIINT VIA_K7 9 MSFT 97) > Mar 3 14:38:24 joker ACPI: PM-Timer IO Port: 0x808 > Mar 3 14:38:24 joker ACPI: Local APIC address 0xfee00000 > Mar 3 14:38:24 joker ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Mar 3 14:38:24 joker Processor #0 6:10 APIC version 16 > Mar 3 14:38:24 joker ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > Mar 3 14:38:24 joker IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 > Mar 3 14:38:24 joker ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > Mar 3 14:38:24 joker ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > Mar 3 14:38:24 joker ACPI: IRQ0 used by override. > Mar 3 14:38:24 joker ACPI: IRQ2 used by override. > Mar 3 14:38:24 joker ACPI: IRQ9 used by override. > Mar 3 14:38:24 joker Enabling APIC mode: Flat. Using 1 I/O APICs > Mar 3 14:38:24 joker Using ACPI (MADT) for SMP configuration information > Mar 3 14:38:24 joker Allocating PCI resources starting at 20000000 (gap: 1fff0000:e0010000) > Mar 3 14:38:24 joker Detected 2198.080 MHz processor. > Mar 3 14:38:24 joker Built 1 zonelists. Total pages: 130033 > Mar 3 14:38:24 joker Kernel command line: root=/dev/disk/by-label/root vga=ext ro agp=off mem=524224K > Mar 3 14:38:24 joker mapped APIC to ffffd000 (fee00000) > Mar 3 14:38:24 joker mapped IOAPIC to ffffc000 (fec00000) > Mar 3 14:38:24 joker Enabling fast FPU save and restore... done. > Mar 3 14:38:24 joker Enabling unmasked SIMD FPU exception support... done. > Mar 3 14:38:24 joker Initializing CPU#0 > Mar 3 14:38:24 joker CPU 0 irqstacks, hard=c0306000 soft=c0305000 > Mar 3 14:38:24 joker PID hash table entries: 2048 (order: 11, 8192 bytes) > Mar 3 14:38:24 joker Console: colour VGA+ 80x50 > Mar 3 14:38:24 joker Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Mar 3 14:38:24 joker Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Mar 3 14:38:24 joker Memory: 516036k/524224k available (1321k kernel code, 7612k reserved, 533k data, 188k init, 0k highmem) > Mar 3 14:38:24 joker virtual kernel memory layout: > Mar 3 14:38:24 joker fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB) > Mar 3 14:38:24 joker vmalloc : 0xe0800000 - 0xfffb5000 ( 503 MB) > Mar 3 14:38:24 joker lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) > Mar 3 14:38:24 joker .init : 0xc02d1000 - 0xc0300000 ( 188 kB) > Mar 3 14:38:24 joker .data : 0xc024a4cd - 0xc02cf9b4 ( 533 kB) > Mar 3 14:38:24 joker .text : 0xc0100000 - 0xc024a4cd (1321 kB) > Mar 3 14:38:24 joker Checking if this processor honours the WP bit even in supervisor mode... Ok. > Mar 3 14:38:24 joker Calibrating delay using timer specific routine.. 4405.92 BogoMIPS (lpj=2546149) > Mar 3 14:38:24 joker Mount-cache hash table entries: 512 > Mar 3 14:38:24 joker CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 > Mar 3 14:38:24 joker CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > Mar 3 14:38:24 joker CPU: L2 Cache: 512K (64 bytes/line) > Mar 3 14:38:24 joker CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 > Mar 3 14:38:24 joker Intel machine check architecture supported. > Mar 3 14:38:24 joker Intel machine check reporting enabled on CPU#0. > Mar 3 14:38:24 joker CPU: AMD Athlon(tm) XP 3200+ stepping 00 > Mar 3 14:38:24 joker Checking 'hlt' instruction... OK. > Mar 3 14:38:24 joker ACPI: Core revision 20070126 > Mar 3 14:38:24 joker ENABLING IO-APIC IRQs > Mar 3 14:38:24 joker ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > Mar 3 14:38:24 joker NET: Registered protocol family 16 > Mar 3 14:38:24 joker ACPI: bus type pci registered > Mar 3 14:38:24 joker PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1 > Mar 3 14:38:24 joker PCI: Using configuration type 1 > Mar 3 14:38:24 joker Setting up standard PCI resources > Mar 3 14:38:24 joker ACPI: Interpreter enabled > Mar 3 14:38:24 joker ACPI: (supports S0 S1 S3 S4 S5) > Mar 3 14:38:24 joker ACPI: Using IOAPIC for interrupt routing > Mar 3 14:38:24 joker ACPI: PCI Root Bridge [PCI0] (0000:00) > Mar 3 14:38:24 joker PCI: Probing PCI hardware (bus 00) > Mar 3 14:38:24 joker Boot video device is 0000:01:00.0 > Mar 3 14:38:24 joker ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > Mar 3 14:38:24 joker ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) > Mar 3 14:38:24 joker ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15) > Mar 3 14:38:24 joker ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 *12 14 15) > Mar 3 14:38:24 joker ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15) > Mar 3 14:38:24 joker ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. > Mar 3 14:38:24 joker ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. > Mar 3 14:38:24 joker ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. > Mar 3 14:38:24 joker ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. > Mar 3 14:38:24 joker ACPI: Power Resource [URP1] (off) > Mar 3 14:38:24 joker ACPI: Power Resource [URP2] (off) > Mar 3 14:38:24 joker ACPI: Power Resource [FDDP] (off) > Mar 3 14:38:24 joker ACPI: Power Resource [LPTP] (off) > Mar 3 14:38:24 joker Linux Plug and Play Support v0.97 (c) Adam Belay > Mar 3 14:38:24 joker pnp: PnP ACPI init > Mar 3 14:38:24 joker pnp: PnP ACPI: found 11 devices > Mar 3 14:38:24 joker PCI: Using ACPI for IRQ routing > Mar 3 14:38:24 joker PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > Mar 3 14:38:24 joker pnp: 00:05: iomem range 0xfec00000-0xfec00fff has been reserved > Mar 3 14:38:24 joker pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved > Mar 3 14:38:24 joker PCI: Bridge: 0000:00:01.0 > Mar 3 14:38:24 joker IO window: disabled. > Mar 3 14:38:24 joker MEM window: dde00000-dfefffff > Mar 3 14:38:24 joker PREFETCH window: cdd00000-ddcfffff > Mar 3 14:38:24 joker PCI: Setting latency timer of device 0000:00:01.0 to 64 > Mar 3 14:38:24 joker NET: Registered protocol family 2 > Mar 3 14:38:24 joker IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > Mar 3 14:38:24 joker TCP established hash table entries: 16384 (order: 5, 131072 bytes) > Mar 3 14:38:24 joker TCP bind hash table entries: 16384 (order: 4, 65536 bytes) > Mar 3 14:38:24 joker TCP: Hash tables configured (established 16384 bind 16384) > Mar 3 14:38:24 joker TCP reno registered > Mar 3 14:38:24 joker checking if image is initramfs... it is > Mar 3 14:38:24 joker Freeing initrd memory: 864k freed > Mar 3 14:38:24 joker Machine check exception polling timer started. > Mar 3 14:38:24 joker VFS: Disk quotas dquot_6.5.1 > Mar 3 14:38:24 joker Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > Mar 3 14:38:24 joker io scheduler noop registered > Mar 3 14:38:24 joker io scheduler anticipatory registered > Mar 3 14:38:24 joker io scheduler deadline registered > Mar 3 14:38:24 joker io scheduler cfq registered (default) > Mar 3 14:38:24 joker PCI: Bypassing VIA 8237 APIC De-Assert Message > Mar 3 14:38:24 joker input: Power Button (FF) as /class/input/input0 > Mar 3 14:38:24 joker ACPI: Power Button (FF) [PWRF] > Mar 3 14:38:24 joker input: Power Button (CM) as /class/input/input1 > Mar 3 14:38:24 joker ACPI: Power Button (CM) [PWRB] > Mar 3 14:38:24 joker input: Sleep Button (CM) as /class/input/input2 > Mar 3 14:38:24 joker ACPI: Sleep Button (CM) [SLPB] > Mar 3 14:38:24 joker isapnp: Scanning for PnP cards... > Mar 3 14:38:24 joker isapnp: No Plug & Play device found > Mar 3 14:38:24 joker Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled > Mar 3 14:38:24 joker serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > Mar 3 14:38:24 joker 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > Mar 3 14:38:24 joker RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize > Mar 3 14:38:24 joker loop: loaded (max 8 devices) > Mar 3 14:38:24 joker PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 > Mar 3 14:38:24 joker PNP: PS/2 controller doesn't have AUX irq; using default 12 > Mar 3 14:38:24 joker serio: i8042 KBD port at 0x60,0x64 irq 1 > Mar 3 14:38:24 joker serio: i8042 AUX port at 0x60,0x64 irq 12 > Mar 3 14:38:24 joker mice: PS/2 mouse device common for all mice > Mar 3 14:38:24 joker TCP cubic registered > Mar 3 14:38:24 joker NET: Registered protocol family 1 > Mar 3 14:38:24 joker NET: Registered protocol family 17 > Mar 3 14:38:24 joker Using IPI Shortcut mode > Mar 3 14:38:24 joker Time: tsc clocksource has been installed. > Mar 3 14:38:24 joker Freeing unused kernel memory: 188k freed > Mar 3 14:38:24 joker SCSI subsystem initialized > Mar 3 14:38:24 joker libata version 2.20 loaded. > Mar 3 14:38:24 joker pata_via 0000:00:0f.1: version 0.2.1 > Mar 3 14:38:24 joker ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16 > Mar 3 14:38:24 joker ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14 > Mar 3 14:38:24 joker ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15 > Mar 3 14:38:24 joker scsi0 : pata_via > Mar 3 14:38:24 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126] > Mar 3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE > Mar 3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c147489c), AE_AML_OPERAND_VALUE > Mar 3 14:38:24 joker ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 > Mar 3 14:38:24 joker ata1.00: 160086528 sectors, multi 16: LBA > Mar 3 14:38:24 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126] > Mar 3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE > Mar 3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c147489c), AE_AML_OPERAND_VALUE > Mar 3 14:38:24 joker ata1.00: configured for UDMA/133 > Mar 3 14:38:24 joker scsi1 : pata_via > Mar 3 14:38:24 joker Switched to high resolution mode on CPU 0 > Mar 3 14:38:24 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126] > Mar 3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE > Mar 3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE > Mar 3 14:38:24 joker ata2.00: ATAPI, max UDMA/33 > Mar 3 14:38:24 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126] > Mar 3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE > Mar 3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE > Mar 3 14:38:24 joker ata2.01: ATAPI, max UDMA/33 > Mar 3 14:38:24 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126] > Mar 3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE > Mar 3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE > Mar 3 14:38:24 joker ata2.00: configured for UDMA/33 > Mar 3 14:38:24 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126] > Mar 3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE > Mar 3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE > Mar 3 14:38:24 joker ata2.01: configured for UDMA/33 > Mar 3 14:38:24 joker scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 > Mar 3 14:38:24 joker scsi 1:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8526B 1.03 PQ: 0 ANSI: 5 > Mar 3 14:38:24 joker scsi 1:0:1:0: CD-ROM LITE-ON DVD SOHD-167T 9S19 PQ: 0 ANSI: 5 > Mar 3 14:38:24 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) > Mar 3 14:38:24 joker sda: Write Protect is off > Mar 3 14:38:24 joker sda: Mode Sense: 00 3a 00 00 > Mar 3 14:38:24 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Mar 3 14:38:24 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) > Mar 3 14:38:24 joker sda: Write Protect is off > Mar 3 14:38:24 joker sda: Mode Sense: 00 3a 00 00 > Mar 3 14:38:24 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Mar 3 14:38:24 joker sda: sda1 sda2 sda3 sda4 < sda5 sda6 > > Mar 3 14:38:24 joker sd 0:0:0:0: Attached scsi disk sda > Mar 3 14:38:24 joker sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray > Mar 3 14:38:24 joker Uniform CD-ROM driver Revision: 3.20 > Mar 3 14:38:24 joker sr 1:0:0:0: Attached scsi CD-ROM sr0 > Mar 3 14:38:24 joker sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray > Mar 3 14:38:24 joker sr 1:0:1:0: Attached scsi CD-ROM sr1 > Mar 3 14:38:24 joker kjournald starting. Commit interval 5 seconds > Mar 3 14:38:24 joker EXT3-fs: mounted filesystem with ordered data mode. > Mar 3 14:38:24 joker usbcore: registered new interface driver usbfs > Mar 3 14:38:24 joker usbcore: registered new interface driver hub > Mar 3 14:38:24 joker usbcore: registered new device driver usb > Mar 3 14:38:24 joker ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 17 > Mar 3 14:38:24 joker Installing spdif_bug patch: Audigy 2 Platinum [SB0240P] > Mar 3 14:38:24 joker Real Time Clock Driver v1.12ac > Mar 3 14:38:24 joker i2c /dev entries driver > Mar 3 14:38:24 joker fuse init (API version 7.8) > Mar 3 14:38:24 joker sd 0:0:0:0: Attached scsi generic sg0 type 0 > Mar 3 14:38:24 joker sr 1:0:0:0: Attached scsi generic sg1 type 5 > Mar 3 14:38:24 joker sr 1:0:1:0: Attached scsi generic sg2 type 5 > Mar 3 14:38:24 joker input: PC Speaker as /class/input/input3 > Mar 3 14:38:24 joker PPP generic driver version 2.4.2 > Mar 3 14:38:24 joker ieee1394: Initialized config rom entry `ip1394' > Mar 3 14:38:24 joker gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xec00, speed 1217kHz > Mar 3 14:38:24 joker ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 > Mar 3 14:38:24 joker rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com > Mar 3 14:38:24 joker ACPI: PCI Interrupt 0000:00:0b.2[B] -> GSI 16 (level, low) -> IRQ 19 > Mar 3 14:38:24 joker USB Universal Host Controller Interface driver v3.0 > Mar 3 14:38:24 joker ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dfff9800-dfff9fff] Max Packet=[2048] IR/IT contexts=[4/8] > Mar 3 14:38:24 joker ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 20 > Mar 3 14:38:24 joker uhci_hcd 0000:00:10.0: UHCI Host Controller > Mar 3 14:38:24 joker uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 > Mar 3 14:38:24 joker uhci_hcd 0000:00:10.0: irq 20, io base 0x0000c000 > Mar 3 14:38:24 joker usb usb1: configuration #1 chosen from 1 choice > Mar 3 14:38:24 joker hub 1-0:1.0: USB hub found > Mar 3 14:38:24 joker hub 1-0:1.0: 2 ports detected > Mar 3 14:38:24 joker ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 20 > Mar 3 14:38:24 joker uhci_hcd 0000:00:10.1: UHCI Host Controller > Mar 3 14:38:24 joker uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 > Mar 3 14:38:24 joker uhci_hcd 0000:00:10.1: irq 20, io base 0x0000c400 > Mar 3 14:38:24 joker usb usb2: configuration #1 chosen from 1 choice > Mar 3 14:38:24 joker hub 2-0:1.0: USB hub found > Mar 3 14:38:24 joker hub 2-0:1.0: 2 ports detected > Mar 3 14:38:24 joker ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 20 > Mar 3 14:38:24 joker uhci_hcd 0000:00:10.2: UHCI Host Controller > Mar 3 14:38:24 joker uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 > Mar 3 14:38:24 joker uhci_hcd 0000:00:10.2: irq 20, io base 0x0000c800 > Mar 3 14:38:24 joker usb usb3: configuration #1 chosen from 1 choice > Mar 3 14:38:24 joker hub 3-0:1.0: USB hub found > Mar 3 14:38:24 joker hub 3-0:1.0: 2 ports detected > Mar 3 14:38:24 joker ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 20 > Mar 3 14:38:24 joker uhci_hcd 0000:00:10.3: UHCI Host Controller > Mar 3 14:38:24 joker uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 > Mar 3 14:38:24 joker uhci_hcd 0000:00:10.3: irq 20, io base 0x0000cc00 > Mar 3 14:38:24 joker usb usb4: configuration #1 chosen from 1 choice > Mar 3 14:38:24 joker hub 4-0:1.0: USB hub found > Mar 3 14:38:24 joker hub 4-0:1.0: 2 ports detected > Mar 3 14:38:24 joker usb 2-1: new low speed USB device using uhci_hcd and address 2 > Mar 3 14:38:24 joker ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 20 > Mar 3 14:38:24 joker ehci_hcd 0000:00:10.4: EHCI Host Controller > Mar 3 14:38:24 joker ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 > Mar 3 14:38:24 joker ehci_hcd 0000:00:10.4: irq 20, io mem 0xdfff9600 > Mar 3 14:38:24 joker ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > Mar 3 14:38:24 joker usb usb5: configuration #1 chosen from 1 choice > Mar 3 14:38:24 joker hub 5-0:1.0: USB hub found > Mar 3 14:38:24 joker hub 5-0:1.0: 8 ports detected > Mar 3 14:38:24 joker usb 2-1: unable to read config index 0 descriptor/start > Mar 3 14:38:24 joker usb 2-1: chopping to 0 config(s) > Mar 3 14:38:24 joker usb 2-1: no configuration chosen from 0 choices > Mar 3 14:38:24 joker parport: PnPBIOS parport detected. > Mar 3 14:38:24 joker parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] > Mar 3 14:38:24 joker sata_via 0000:00:0f.0: version 2.1 > Mar 3 14:38:24 joker ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 16 > Mar 3 14:38:24 joker sata_via 0000:00:0f.0: routed to hard irq line 10 > Mar 3 14:38:24 joker ata3: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e402 bmdma 0x0001d800 irq 16 > Mar 3 14:38:24 joker ata4: SATA max UDMA/133 cmd 0x0001e000 ctl 0x0001dc02 bmdma 0x0001d808 irq 16 > Mar 3 14:38:24 joker scsi2 : sata_via > Mar 3 14:38:24 joker rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 > Mar 3 14:38:24 joker pnp: Device 00:07 does not support disabling. > Mar 3 14:38:24 joker rtc_cmos: probe of 00:07 failed with error -16 > Mar 3 14:38:24 joker ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300) > Mar 3 14:38:24 joker ATA: abnormal status 0x7F on port 0x0001e807 > Mar 3 14:38:24 joker scsi3 : sata_via > Mar 3 14:38:24 joker via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker > Mar 3 14:38:24 joker ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300) > Mar 3 14:38:24 joker ATA: abnormal status 0x7F on port 0x0001e007 > Mar 3 14:38:24 joker ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 21 > Mar 3 14:38:24 joker PCI: Setting latency timer of device 0000:00:11.5 to 64 > Mar 3 14:38:24 joker usb 2-1: USB disconnect, address 2 > Mar 3 14:38:24 joker ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c00910047b3] > Mar 3 14:38:24 joker lp0: using parport0 (interrupt-driven). > Mar 3 14:38:24 joker ppdev: user-space parallel port driver > Mar 3 14:38:24 joker usb 2-1: new low speed USB device using uhci_hcd and address 3 > Mar 3 14:38:24 joker ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 22 > Mar 3 14:38:24 joker eth0: VIA Rhine II at 0xdfff9500, 00:0b:6a:99:27:12, IRQ 22. > Mar 3 14:38:24 joker eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0021. > Mar 3 14:38:24 joker usb 2-1: configuration #1 chosen from 1 choice > Mar 3 14:38:24 joker usbcore: registered new interface driver hiddev > Mar 3 14:38:24 joker input: HID 1241:1177 as /class/input/input4 > Mar 3 14:38:24 joker input: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:10.1-1 > Mar 3 14:38:24 joker usbcore: registered new interface driver usbhid > Mar 3 14:38:24 joker drivers/usb/input/hid-core.c: v2.6:USB HID core driver > Mar 3 14:38:24 joker EXT3 FS on sda2, internal journal > Mar 3 14:38:24 joker Adding 1534168k swap on /dev/disk/by-label/swap. Priority:-1 extents:1 across:1534168k > Mar 3 14:38:24 joker init: Going single user > > An here's one with irqfixup (after a cold boot - doesn't always work after a warm boot) (keyboard works): > Mar 3 14:41:52 joker syslog-ng[4191]: syslog-ng starting up; version='2.0.0' > Mar 3 14:41:52 joker 000 (usable) > Mar 3 14:41:52 joker user-defined physical RAM map: > Mar 3 14:41:52 joker user: 0000000000000000 - 000000000009fc00 (usable) > Mar 3 14:41:52 joker user: 000000000009fc00 - 00000000000a0000 (reserved) > Mar 3 14:41:52 joker user: 00000000000f0000 - 0000000000100000 (reserved) > Mar 3 14:41:52 joker user: 0000000000100000 - 000000001fff0000 (usable) > Mar 3 14:41:52 joker 511MB LOWMEM available. > Mar 3 14:41:52 joker Entering add_active_range(0, 0, 131056) 0 entries of 256 used > Mar 3 14:41:52 joker Zone PFN ranges: > Mar 3 14:41:52 joker DMA 0 -> 4096 > Mar 3 14:41:52 joker Normal 4096 -> 131056 > Mar 3 14:41:52 joker early_node_map[1] active PFN ranges > Mar 3 14:41:52 joker 0: 0 -> 131056 > Mar 3 14:41:52 joker On node 0 totalpages: 131056 > Mar 3 14:41:52 joker DMA zone: 32 pages used for memmap > Mar 3 14:41:52 joker DMA zone: 0 pages reserved > Mar 3 14:41:52 joker DMA zone: 4064 pages, LIFO batch:0 > Mar 3 14:41:52 joker Normal zone: 991 pages used for memmap > Mar 3 14:41:52 joker Normal zone: 125969 pages, LIFO batch:31 > Mar 3 14:41:52 joker DMI 2.3 present. > Mar 3 14:41:52 joker ACPI: RSDP 000FA8C0, 0014 (r0 AMI ) > Mar 3 14:41:52 joker ACPI: RSDT 1FFF0000, 002C (r1 AMIINT VIA_K7 10 MSFT 97) > Mar 3 14:41:52 joker ACPI: FACP 1FFF0030, 0081 (r1 AMIINT VIA_K7 11 MSFT 97) > Mar 3 14:41:52 joker ACPI: DSDT 1FFF0120, 3502 (r1 VIA K7VT4 1000 MSFT 100000D) > Mar 3 14:41:52 joker ACPI: FACS 1FFF8000, 0040 > Mar 3 14:41:52 joker ACPI: APIC 1FFF00C0, 0054 (r1 AMIINT VIA_K7 9 MSFT 97) > Mar 3 14:41:52 joker ACPI: PM-Timer IO Port: 0x808 > Mar 3 14:41:52 joker ACPI: Local APIC address 0xfee00000 > Mar 3 14:41:52 joker ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Mar 3 14:41:52 joker Processor #0 6:10 APIC version 16 > Mar 3 14:41:52 joker ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > Mar 3 14:41:52 joker IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 > Mar 3 14:41:52 joker ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > Mar 3 14:41:52 joker ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > Mar 3 14:41:52 joker ACPI: IRQ0 used by override. > Mar 3 14:41:52 joker ACPI: IRQ2 used by override. > Mar 3 14:41:52 joker ACPI: IRQ9 used by override. > Mar 3 14:41:52 joker Enabling APIC mode: Flat. Using 1 I/O APICs > Mar 3 14:41:52 joker Using ACPI (MADT) for SMP configuration information > Mar 3 14:41:52 joker Allocating PCI resources starting at 20000000 (gap: 1fff0000:e0010000) > Mar 3 14:41:52 joker Detected 2198.080 MHz processor. > Mar 3 14:41:52 joker Built 1 zonelists. Total pages: 130033 > Mar 3 14:41:52 joker Kernel command line: root=/dev/disk/by-label/root vga=ext ro agp=off irqfixup mem=524224K > Mar 3 14:41:52 joker Misrouted IRQ fixup support enabled. > Mar 3 14:41:52 joker This may impact system performance. > Mar 3 14:41:52 joker mapped APIC to ffffd000 (fee00000) > Mar 3 14:41:52 joker mapped IOAPIC to ffffc000 (fec00000) > Mar 3 14:41:52 joker Enabling fast FPU save and restore... done. > Mar 3 14:41:52 joker Enabling unmasked SIMD FPU exception support... done. > Mar 3 14:41:52 joker Initializing CPU#0 > Mar 3 14:41:52 joker CPU 0 irqstacks, hard=c0306000 soft=c0305000 > Mar 3 14:41:52 joker PID hash table entries: 2048 (order: 11, 8192 bytes) > Mar 3 14:41:52 joker Console: colour VGA+ 80x50 > Mar 3 14:41:52 joker Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Mar 3 14:41:52 joker Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Mar 3 14:41:52 joker Memory: 516036k/524224k available (1321k kernel code, 7612k reserved, 533k data, 188k init, 0k highmem) > Mar 3 14:41:52 joker virtual kernel memory layout: > Mar 3 14:41:52 joker fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB) > Mar 3 14:41:52 joker vmalloc : 0xe0800000 - 0xfffb5000 ( 503 MB) > Mar 3 14:41:52 joker lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) > Mar 3 14:41:52 joker .init : 0xc02d1000 - 0xc0300000 ( 188 kB) > Mar 3 14:41:52 joker .data : 0xc024a4cd - 0xc02cf9b4 ( 533 kB) > Mar 3 14:41:52 joker .text : 0xc0100000 - 0xc024a4cd (1321 kB) > Mar 3 14:41:52 joker Checking if this processor honours the WP bit even in supervisor mode... Ok. > Mar 3 14:41:52 joker Calibrating delay using timer specific routine.. 4405.92 BogoMIPS (lpj=2546145) > Mar 3 14:41:52 joker Mount-cache hash table entries: 512 > Mar 3 14:41:52 joker CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 > Mar 3 14:41:52 joker CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > Mar 3 14:41:52 joker CPU: L2 Cache: 512K (64 bytes/line) > Mar 3 14:41:52 joker CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 > Mar 3 14:41:52 joker Intel machine check architecture supported. > Mar 3 14:41:52 joker Intel machine check reporting enabled on CPU#0. > Mar 3 14:41:52 joker CPU: AMD Athlon(tm) XP 3200+ stepping 00 > Mar 3 14:41:52 joker Checking 'hlt' instruction... OK. > Mar 3 14:41:52 joker ACPI: Core revision 20070126 > Mar 3 14:41:52 joker ENABLING IO-APIC IRQs > Mar 3 14:41:52 joker ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > Mar 3 14:41:52 joker NET: Registered protocol family 16 > Mar 3 14:41:52 joker ACPI: bus type pci registered > Mar 3 14:41:52 joker PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1 > Mar 3 14:41:52 joker PCI: Using configuration type 1 > Mar 3 14:41:52 joker Setting up standard PCI resources > Mar 3 14:41:52 joker ACPI: Interpreter enabled > Mar 3 14:41:52 joker ACPI: (supports S0 S1 S3 S4 S5) > Mar 3 14:41:52 joker ACPI: Using IOAPIC for interrupt routing > Mar 3 14:41:52 joker ACPI: PCI Root Bridge [PCI0] (0000:00) > Mar 3 14:41:52 joker PCI: Probing PCI hardware (bus 00) > Mar 3 14:41:52 joker Boot video device is 0000:01:00.0 > Mar 3 14:41:52 joker ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > Mar 3 14:41:52 joker ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) > Mar 3 14:41:52 joker ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15) > Mar 3 14:41:52 joker ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 *12 14 15) > Mar 3 14:41:52 joker ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15) > Mar 3 14:41:52 joker ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. > Mar 3 14:41:52 joker ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. > Mar 3 14:41:52 joker ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. > Mar 3 14:41:52 joker ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. > Mar 3 14:41:52 joker ACPI: Power Resource [URP1] (off) > Mar 3 14:41:52 joker ACPI: Power Resource [URP2] (off) > Mar 3 14:41:52 joker ACPI: Power Resource [FDDP] (off) > Mar 3 14:41:52 joker ACPI: Power Resource [LPTP] (off) > Mar 3 14:41:52 joker Linux Plug and Play Support v0.97 (c) Adam Belay > Mar 3 14:41:52 joker pnp: PnP ACPI init > Mar 3 14:41:52 joker pnp: PnP ACPI: found 11 devices > Mar 3 14:41:52 joker PCI: Using ACPI for IRQ routing > Mar 3 14:41:52 joker PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > Mar 3 14:41:52 joker pnp: 00:05: iomem range 0xfec00000-0xfec00fff has been reserved > Mar 3 14:41:52 joker pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved > Mar 3 14:41:52 joker PCI: Bridge: 0000:00:01.0 > Mar 3 14:41:52 joker IO window: disabled. > Mar 3 14:41:52 joker MEM window: dde00000-dfefffff > Mar 3 14:41:52 joker PREFETCH window: cdd00000-ddcfffff > Mar 3 14:41:52 joker PCI: Setting latency timer of device 0000:00:01.0 to 64 > Mar 3 14:41:52 joker NET: Registered protocol family 2 > Mar 3 14:41:52 joker IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > Mar 3 14:41:52 joker TCP established hash table entries: 16384 (order: 5, 131072 bytes) > Mar 3 14:41:52 joker TCP bind hash table entries: 16384 (order: 4, 65536 bytes) > Mar 3 14:41:52 joker TCP: Hash tables configured (established 16384 bind 16384) > Mar 3 14:41:52 joker TCP reno registered > Mar 3 14:41:52 joker checking if image is initramfs... it is > Mar 3 14:41:52 joker Freeing initrd memory: 864k freed > Mar 3 14:41:52 joker Machine check exception polling timer started. > Mar 3 14:41:52 joker VFS: Disk quotas dquot_6.5.1 > Mar 3 14:41:52 joker Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > Mar 3 14:41:52 joker io scheduler noop registered > Mar 3 14:41:52 joker io scheduler anticipatory registered > Mar 3 14:41:52 joker io scheduler deadline registered > Mar 3 14:41:52 joker io scheduler cfq registered (default) > Mar 3 14:41:52 joker PCI: Bypassing VIA 8237 APIC De-Assert Message > Mar 3 14:41:52 joker input: Power Button (FF) as /class/input/input0 > Mar 3 14:41:52 joker ACPI: Power Button (FF) [PWRF] > Mar 3 14:41:52 joker input: Power Button (CM) as /class/input/input1 > Mar 3 14:41:52 joker ACPI: Power Button (CM) [PWRB] > Mar 3 14:41:52 joker input: Sleep Button (CM) as /class/input/input2 > Mar 3 14:41:52 joker ACPI: Sleep Button (CM) [SLPB] > Mar 3 14:41:52 joker isapnp: Scanning for PnP cards... > Mar 3 14:41:52 joker isapnp: No Plug & Play device found > Mar 3 14:41:52 joker Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled > Mar 3 14:41:52 joker serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > Mar 3 14:41:52 joker 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > Mar 3 14:41:52 joker RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize > Mar 3 14:41:52 joker loop: loaded (max 8 devices) > Mar 3 14:41:52 joker PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 > Mar 3 14:41:52 joker PNP: PS/2 controller doesn't have AUX irq; using default 12 > Mar 3 14:41:52 joker serio: i8042 KBD port at 0x60,0x64 irq 1 > Mar 3 14:41:52 joker serio: i8042 AUX port at 0x60,0x64 irq 12 > Mar 3 14:41:52 joker mice: PS/2 mouse device common for all mice > Mar 3 14:41:52 joker TCP cubic registered > Mar 3 14:41:52 joker NET: Registered protocol family 1 > Mar 3 14:41:52 joker NET: Registered protocol family 17 > Mar 3 14:41:52 joker Using IPI Shortcut mode > Mar 3 14:41:52 joker Time: tsc clocksource has been installed. > Mar 3 14:41:52 joker Freeing unused kernel memory: 188k freed > Mar 3 14:41:52 joker SCSI subsystem initialized > Mar 3 14:41:52 joker libata version 2.20 loaded. > Mar 3 14:41:52 joker pata_via 0000:00:0f.1: version 0.2.1 > Mar 3 14:41:52 joker ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16 > Mar 3 14:41:52 joker ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14 > Mar 3 14:41:52 joker ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15 > Mar 3 14:41:52 joker scsi0 : pata_via > Mar 3 14:41:52 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126] > Mar 3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE > Mar 3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c147489c), AE_AML_OPERAND_VALUE > Mar 3 14:41:52 joker ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 > Mar 3 14:41:52 joker ata1.00: 160086528 sectors, multi 16: LBA > Mar 3 14:41:52 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126] > Mar 3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE > Mar 3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c147489c), AE_AML_OPERAND_VALUE > Mar 3 14:41:52 joker ata1.00: configured for UDMA/133 > Mar 3 14:41:52 joker scsi1 : pata_via > Mar 3 14:41:52 joker Switched to high resolution mode on CPU 0 > Mar 3 14:41:52 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126] > Mar 3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE > Mar 3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE > Mar 3 14:41:52 joker ata2.00: ATAPI, max UDMA/33 > Mar 3 14:41:52 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126] > Mar 3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE > Mar 3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE > Mar 3 14:41:52 joker ata2.01: ATAPI, max UDMA/33 > Mar 3 14:41:52 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126] > Mar 3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE > Mar 3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE > Mar 3 14:41:52 joker ata2.00: configured for UDMA/33 > Mar 3 14:41:52 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126] > Mar 3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE > Mar 3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE > Mar 3 14:41:52 joker ata2.01: configured for UDMA/33 > Mar 3 14:41:52 joker scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 > Mar 3 14:41:52 joker scsi 1:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8526B 1.03 PQ: 0 ANSI: 5 > Mar 3 14:41:52 joker scsi 1:0:1:0: CD-ROM LITE-ON DVD SOHD-167T 9S19 PQ: 0 ANSI: 5 > Mar 3 14:41:52 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) > Mar 3 14:41:52 joker sda: Write Protect is off > Mar 3 14:41:52 joker sda: Mode Sense: 00 3a 00 00 > Mar 3 14:41:52 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Mar 3 14:41:52 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) > Mar 3 14:41:52 joker sda: Write Protect is off > Mar 3 14:41:52 joker sda: Mode Sense: 00 3a 00 00 > Mar 3 14:41:52 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Mar 3 14:41:52 joker sda: sda1 sda2 sda3 sda4 < sda5 sda6 > > Mar 3 14:41:52 joker sd 0:0:0:0: Attached scsi disk sda > Mar 3 14:41:52 joker sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray > Mar 3 14:41:52 joker Uniform CD-ROM driver Revision: 3.20 > Mar 3 14:41:52 joker sr 1:0:0:0: Attached scsi CD-ROM sr0 > Mar 3 14:41:52 joker sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray > Mar 3 14:41:52 joker sr 1:0:1:0: Attached scsi CD-ROM sr1 > Mar 3 14:41:52 joker input: AT Translated Set 2 keyboard as /class/input/input3 > Mar 3 14:41:52 joker EXT3-fs: INFO: recovery required on readonly filesystem. > Mar 3 14:41:52 joker EXT3-fs: write access will be enabled during recovery. > Mar 3 14:41:52 joker kjournald starting. Commit interval 5 seconds > Mar 3 14:41:52 joker EXT3-fs: recovery complete. > Mar 3 14:41:52 joker EXT3-fs: mounted filesystem with ordered data mode. > Mar 3 14:41:52 joker usbcore: registered new interface driver usbfs > Mar 3 14:41:52 joker usbcore: registered new interface driver hub > Mar 3 14:41:52 joker usbcore: registered new device driver usb > Mar 3 14:41:52 joker ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 17 > Mar 3 14:41:52 joker Installing spdif_bug patch: Audigy 2 Platinum [SB0240P] > Mar 3 14:41:52 joker Real Time Clock Driver v1.12ac > Mar 3 14:41:52 joker i2c /dev entries driver > Mar 3 14:41:52 joker fuse init (API version 7.8) > Mar 3 14:41:52 joker sd 0:0:0:0: Attached scsi generic sg0 type 0 > Mar 3 14:41:52 joker sr 1:0:0:0: Attached scsi generic sg1 type 5 > Mar 3 14:41:52 joker sr 1:0:1:0: Attached scsi generic sg2 type 5 > Mar 3 14:41:52 joker gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xec00, speed 1217kHz > Mar 3 14:41:52 joker ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 > Mar 3 14:41:52 joker rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com > Mar 3 14:41:52 joker ieee1394: Initialized config rom entry `ip1394' > Mar 3 14:41:52 joker PPP generic driver version 2.4.2 > Mar 3 14:41:52 joker ACPI: PCI Interrupt 0000:00:0b.2[B] -> GSI 16 (level, low) -> IRQ 19 > Mar 3 14:41:52 joker parport: PnPBIOS parport detected. > Mar 3 14:41:52 joker parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] > Mar 3 14:41:52 joker rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 > Mar 3 14:41:52 joker pnp: Device 00:07 does not support disabling. > Mar 3 14:41:52 joker rtc_cmos: probe of 00:07 failed with error -16 > Mar 3 14:41:52 joker input: PC Speaker as /class/input/input4 > Mar 3 14:41:52 joker USB Universal Host Controller Interface driver v3.0 > Mar 3 14:41:52 joker ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dfff9800-dfff9fff] Max Packet=[2048] IR/IT contexts=[4/8] > Mar 3 14:41:52 joker sata_via 0000:00:0f.0: version 2.1 > Mar 3 14:41:52 joker ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 16 > Mar 3 14:41:52 joker sata_via 0000:00:0f.0: routed to hard irq line 10 > Mar 3 14:41:52 joker ata3: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e402 bmdma 0x0001d800 irq 16 > Mar 3 14:41:52 joker ata4: SATA max UDMA/133 cmd 0x0001e000 ctl 0x0001dc02 bmdma 0x0001d808 irq 16 > Mar 3 14:41:52 joker scsi2 : sata_via > Mar 3 14:41:52 joker lp0: using parport0 (interrupt-driven). > Mar 3 14:41:52 joker ppdev: user-space parallel port driver > Mar 3 14:41:52 joker ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300) > Mar 3 14:41:52 joker ATA: abnormal status 0x7F on port 0x0001e807 > Mar 3 14:41:52 joker scsi3 : sata_via > Mar 3 14:41:52 joker ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300) > Mar 3 14:41:52 joker ATA: abnormal status 0x7F on port 0x0001e007 > Mar 3 14:41:52 joker ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 20 > Mar 3 14:41:52 joker uhci_hcd 0000:00:10.0: UHCI Host Controller > Mar 3 14:41:52 joker uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 > Mar 3 14:41:52 joker uhci_hcd 0000:00:10.0: irq 20, io base 0x0000c000 > Mar 3 14:41:52 joker usb usb1: configuration #1 chosen from 1 choice > Mar 3 14:41:52 joker hub 1-0:1.0: USB hub found > Mar 3 14:41:52 joker hub 1-0:1.0: 2 ports detected > Mar 3 14:41:52 joker via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker > Mar 3 14:41:52 joker atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly. > Mar 3 14:41:52 joker ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 20 > Mar 3 14:41:52 joker uhci_hcd 0000:00:10.1: UHCI Host Controller > Mar 3 14:41:52 joker uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 > Mar 3 14:41:52 joker uhci_hcd 0000:00:10.1: irq 20, io base 0x0000c400 > Mar 3 14:41:52 joker usb usb2: configuration #1 chosen from 1 choice > Mar 3 14:41:52 joker hub 2-0:1.0: USB hub found > Mar 3 14:41:52 joker hub 2-0:1.0: 2 ports detected > Mar 3 14:41:52 joker ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 20 > Mar 3 14:41:52 joker uhci_hcd 0000:00:10.2: UHCI Host Controller > Mar 3 14:41:52 joker uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 > Mar 3 14:41:52 joker uhci_hcd 0000:00:10.2: irq 20, io base 0x0000c800 > Mar 3 14:41:52 joker usb usb3: configuration #1 chosen from 1 choice > Mar 3 14:41:52 joker hub 3-0:1.0: USB hub found > Mar 3 14:41:52 joker hub 3-0:1.0: 2 ports detected > Mar 3 14:41:52 joker ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 20 > Mar 3 14:41:52 joker uhci_hcd 0000:00:10.3: UHCI Host Controller > Mar 3 14:41:52 joker uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 > Mar 3 14:41:52 joker uhci_hcd 0000:00:10.3: irq 20, io base 0x0000cc00 > Mar 3 14:41:52 joker usb usb4: configuration #1 chosen from 1 choice > Mar 3 14:41:52 joker hub 4-0:1.0: USB hub found > Mar 3 14:41:52 joker hub 4-0:1.0: 2 ports detected > Mar 3 14:41:52 joker ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 20 > Mar 3 14:41:52 joker ehci_hcd 0000:00:10.4: EHCI Host Controller > Mar 3 14:41:52 joker ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 > Mar 3 14:41:52 joker ehci_hcd 0000:00:10.4: irq 20, io mem 0xdfff9600 > Mar 3 14:41:52 joker ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > Mar 3 14:41:52 joker usb usb5: configuration #1 chosen from 1 choice > Mar 3 14:41:52 joker hub 5-0:1.0: USB hub found > Mar 3 14:41:52 joker hub 5-0:1.0: 8 ports detected > Mar 3 14:41:52 joker ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 21 > Mar 3 14:41:52 joker PCI: Setting latency timer of device 0000:00:11.5 to 64 > Mar 3 14:41:52 joker ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c00910047b3] > Mar 3 14:41:52 joker ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 22 > Mar 3 14:41:52 joker eth0: VIA Rhine II at 0xdfff9500, 00:0b:6a:99:27:12, IRQ 22. > Mar 3 14:41:52 joker eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0021. > Mar 3 14:41:52 joker usb 2-1: new low speed USB device using uhci_hcd and address 2 > Mar 3 14:41:52 joker EXT3 FS on sda2, internal journal > Mar 3 14:41:52 joker usb 2-1: configuration #1 chosen from 1 choice > Mar 3 14:41:52 joker Adding 1534168k swap on /dev/disk/by-label/swap. Priority:-1 extents:1 across:1534168k > Mar 3 14:41:52 joker usbcore: registered new interface driver hiddev > Mar 3 14:41:52 joker input: HID 1241:1177 as /class/input/input5 > Mar 3 14:41:52 joker input: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:10.1-1 > Mar 3 14:41:52 joker usbcore: registered new interface driver usbhid > Mar 3 14:41:52 joker drivers/usb/input/hid-core.c: v2.6:USB HID core driver > Mar 3 14:41:52 joker init: Going single user > Mar 3 14:42:25 joker shutdown[4197]: shutting down for system reboot > Mar 3 14:42:25 joker init: Switching to runlevel: 6 > Mar 3 14:42:26 joker syslog-ng[4191]: SIGTERM received, terminating; > Mar 3 14:42:26 joker syslog-ng[4191]: syslog-ng shutting down; version='2.0.0' > > And here's one with pci=noacpi (keyboard works): > Mar 3 14:43:13 joker syslog-ng[4211]: syslog-ng starting up; version='2.0.0' > Mar 3 14:43:13 joker fef0000 end: 000000001fff0000 type: 1 > Mar 3 14:43:13 joker copy_e820_map() type is E820_RAM > Mar 3 14:43:13 joker copy_e820_map() start: 000000001fff0000 size: 0000000000008000 end: 000000001fff8000 type: 3 > Mar 3 14:43:13 joker copy_e820_map() start: 000000001fff8000 size: 0000000000008000 end: 0000000020000000 type: 4 > Mar 3 14:43:13 joker copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 > Mar 3 14:43:13 joker copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 > Mar 3 14:43:13 joker copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2 > Mar 3 14:43:13 joker BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > Mar 3 14:43:13 joker BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > Mar 3 14:43:13 joker BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > Mar 3 14:43:13 joker BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) > Mar 3 14:43:13 joker BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) > Mar 3 14:43:13 joker BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) > Mar 3 14:43:13 joker BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > Mar 3 14:43:13 joker BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > Mar 3 14:43:13 joker BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > Mar 3 14:43:13 joker limit_regions start: 0000000000000000 - 000000000009fc00 (usable) > Mar 3 14:43:13 joker limit_regions start: 000000000009fc00 - 00000000000a0000 (reserved) > Mar 3 14:43:13 joker limit_regions start: 00000000000f0000 - 0000000000100000 (reserved) > Mar 3 14:43:13 joker limit_regions start: 0000000000100000 - 000000001fff0000 (usable) > Mar 3 14:43:13 joker limit_regions start: 000000001fff0000 - 000000001fff8000 (ACPI data) > Mar 3 14:43:13 joker limit_regions start: 000000001fff8000 - 0000000020000000 (ACPI NVS) > Mar 3 14:43:13 joker limit_regions start: 00000000fec00000 - 00000000fec01000 (reserved) > Mar 3 14:43:13 joker limit_regions start: 00000000fee00000 - 00000000fee01000 (reserved) > Mar 3 14:43:13 joker limit_regions start: 00000000fff80000 - 0000000100000000 (reserved) > Mar 3 14:43:13 joker limit_regions endfor: 0000000000000000 - 000000000009fc00 (usable) > Mar 3 14:43:13 joker limit_regions endfor: 000000000009fc00 - 00000000000a0000 (reserved) > Mar 3 14:43:13 joker limit_regions endfor: 00000000000f0000 - 0000000000100000 (reserved) > Mar 3 14:43:13 joker limit_regions endfor: 0000000000100000 - 000000001fff0000 (usable) > Mar 3 14:43:13 joker user-defined physical RAM map: > Mar 3 14:43:13 joker user: 0000000000000000 - 000000000009fc00 (usable) > Mar 3 14:43:13 joker user: 000000000009fc00 - 00000000000a0000 (reserved) > Mar 3 14:43:13 joker user: 00000000000f0000 - 0000000000100000 (reserved) > Mar 3 14:43:13 joker user: 0000000000100000 - 000000001fff0000 (usable) > Mar 3 14:43:13 joker 511MB LOWMEM available. > Mar 3 14:43:13 joker Entering add_active_range(0, 0, 131056) 0 entries of 256 used > Mar 3 14:43:13 joker Zone PFN ranges: > Mar 3 14:43:13 joker DMA 0 -> 4096 > Mar 3 14:43:13 joker Normal 4096 -> 131056 > Mar 3 14:43:13 joker early_node_map[1] active PFN ranges > Mar 3 14:43:13 joker 0: 0 -> 131056 > Mar 3 14:43:13 joker On node 0 totalpages: 131056 > Mar 3 14:43:13 joker DMA zone: 32 pages used for memmap > Mar 3 14:43:13 joker DMA zone: 0 pages reserved > Mar 3 14:43:13 joker DMA zone: 4064 pages, LIFO batch:0 > Mar 3 14:43:13 joker Normal zone: 991 pages used for memmap > Mar 3 14:43:13 joker Normal zone: 125969 pages, LIFO batch:31 > Mar 3 14:43:13 joker DMI 2.3 present. > Mar 3 14:43:13 joker ACPI: RSDP 000FA8C0, 0014 (r0 AMI ) > Mar 3 14:43:13 joker ACPI: RSDT 1FFF0000, 002C (r1 AMIINT VIA_K7 10 MSFT 97) > Mar 3 14:43:13 joker ACPI: FACP 1FFF0030, 0081 (r1 AMIINT VIA_K7 11 MSFT 97) > Mar 3 14:43:13 joker ACPI: DSDT 1FFF0120, 3502 (r1 VIA K7VT4 1000 MSFT 100000D) > Mar 3 14:43:13 joker ACPI: FACS 1FFF8000, 0040 > Mar 3 14:43:13 joker ACPI: APIC 1FFF00C0, 0054 (r1 AMIINT VIA_K7 9 MSFT 97) > Mar 3 14:43:13 joker ACPI: PM-Timer IO Port: 0x808 > Mar 3 14:43:13 joker ACPI: Local APIC address 0xfee00000 > Mar 3 14:43:13 joker ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Mar 3 14:43:13 joker Processor #0 6:10 APIC version 16 > Mar 3 14:43:13 joker Allocating PCI resources starting at 20000000 (gap: 1fff0000:e0010000) > Mar 3 14:43:13 joker Detected 2198.080 MHz processor. > Mar 3 14:43:13 joker Built 1 zonelists. Total pages: 130033 > Mar 3 14:43:13 joker Kernel command line: root=/dev/disk/by-label/root vga=ext ro agp=off pci=noacpi mem=524224K > Mar 3 14:43:13 joker Found and enabled local APIC! > Mar 3 14:43:13 joker mapped APIC to ffffd000 (fee00000) > Mar 3 14:43:13 joker Enabling fast FPU save and restore... done. > Mar 3 14:43:13 joker Enabling unmasked SIMD FPU exception support... done. > Mar 3 14:43:13 joker Initializing CPU#0 > Mar 3 14:43:13 joker CPU 0 irqstacks, hard=c0306000 soft=c0305000 > Mar 3 14:43:13 joker PID hash table entries: 2048 (order: 11, 8192 bytes) > Mar 3 14:43:13 joker Console: colour VGA+ 80x50 > Mar 3 14:43:13 joker Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Mar 3 14:43:13 joker Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Mar 3 14:43:13 joker Memory: 516036k/524224k available (1321k kernel code, 7612k reserved, 533k data, 188k init, 0k highmem) > Mar 3 14:43:13 joker virtual kernel memory layout: > Mar 3 14:43:13 joker fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB) > Mar 3 14:43:13 joker vmalloc : 0xe0800000 - 0xfffb5000 ( 503 MB) > Mar 3 14:43:13 joker lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) > Mar 3 14:43:13 joker .init : 0xc02d1000 - 0xc0300000 ( 188 kB) > Mar 3 14:43:13 joker .data : 0xc024a4cd - 0xc02cf9b4 ( 533 kB) > Mar 3 14:43:13 joker .text : 0xc0100000 - 0xc024a4cd (1321 kB) > Mar 3 14:43:13 joker Checking if this processor honours the WP bit even in supervisor mode... Ok. > Mar 3 14:43:13 joker Calibrating delay using timer specific routine.. 4405.91 BogoMIPS (lpj=2546144) > Mar 3 14:43:13 joker Mount-cache hash table entries: 512 > Mar 3 14:43:13 joker CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 > Mar 3 14:43:13 joker CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > Mar 3 14:43:13 joker CPU: L2 Cache: 512K (64 bytes/line) > Mar 3 14:43:13 joker CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 > Mar 3 14:43:13 joker Intel machine check architecture supported. > Mar 3 14:43:13 joker Intel machine check reporting enabled on CPU#0. > Mar 3 14:43:13 joker CPU: AMD Athlon(tm) XP 3200+ stepping 00 > Mar 3 14:43:13 joker Checking 'hlt' instruction... OK. > Mar 3 14:43:13 joker ACPI: Core revision 20070126 > Mar 3 14:43:13 joker ACPI: setting ELCR to 1e20 (from 1c20) > Mar 3 14:43:13 joker NET: Registered protocol family 16 > Mar 3 14:43:13 joker ACPI: bus type pci registered > Mar 3 14:43:13 joker PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1 > Mar 3 14:43:13 joker PCI: Using configuration type 1 > Mar 3 14:43:13 joker Setting up standard PCI resources > Mar 3 14:43:13 joker ACPI: Interpreter enabled > Mar 3 14:43:13 joker ACPI: (supports S0 S1 S3 S4 S5) > Mar 3 14:43:13 joker ACPI: Using PIC for interrupt routing > Mar 3 14:43:13 joker ACPI: Power Resource [URP1] (off) > Mar 3 14:43:13 joker ACPI: Power Resource [URP2] (off) > Mar 3 14:43:13 joker ACPI: Power Resource [FDDP] (off) > Mar 3 14:43:13 joker ACPI: Power Resource [LPTP] (off) > Mar 3 14:43:13 joker Linux Plug and Play Support v0.97 (c) Adam Belay > Mar 3 14:43:13 joker pnp: PnP ACPI init > Mar 3 14:43:13 joker pnp: PnP ACPI: found 11 devices > Mar 3 14:43:13 joker PCI: Probing PCI hardware > Mar 3 14:43:13 joker PCI: Probing PCI hardware (bus 00) > Mar 3 14:43:13 joker Boot video device is 0000:01:00.0 > Mar 3 14:43:13 joker PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0 > Mar 3 14:43:13 joker PCI: setting IRQ 11 as level-triggered > Mar 3 14:43:13 joker PCI: Found IRQ 11 for device 0000:00:0f.1 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0b.2 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.0 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.1 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:12.0 > Mar 3 14:43:13 joker pnp: 00:05: iomem range 0xfec00000-0xfec00fff has been reserved > Mar 3 14:43:13 joker pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved > Mar 3 14:43:13 joker PCI: Bridge: 0000:00:01.0 > Mar 3 14:43:13 joker IO window: disabled. > Mar 3 14:43:13 joker MEM window: dde00000-dfefffff > Mar 3 14:43:13 joker PREFETCH window: cdd00000-ddcfffff > Mar 3 14:43:13 joker PCI: Setting latency timer of device 0000:00:01.0 to 64 > Mar 3 14:43:13 joker NET: Registered protocol family 2 > Mar 3 14:43:13 joker IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > Mar 3 14:43:13 joker TCP established hash table entries: 16384 (order: 5, 131072 bytes) > Mar 3 14:43:13 joker TCP bind hash table entries: 16384 (order: 4, 65536 bytes) > Mar 3 14:43:13 joker TCP: Hash tables configured (established 16384 bind 16384) > Mar 3 14:43:13 joker TCP reno registered > Mar 3 14:43:13 joker checking if image is initramfs... it is > Mar 3 14:43:13 joker Freeing initrd memory: 864k freed > Mar 3 14:43:13 joker Machine check exception polling timer started. > Mar 3 14:43:13 joker VFS: Disk quotas dquot_6.5.1 > Mar 3 14:43:13 joker Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > Mar 3 14:43:13 joker io scheduler noop registered > Mar 3 14:43:13 joker io scheduler anticipatory registered > Mar 3 14:43:13 joker io scheduler deadline registered > Mar 3 14:43:13 joker io scheduler cfq registered (default) > Mar 3 14:43:13 joker PCI: Bypassing VIA 8237 APIC De-Assert Message > Mar 3 14:43:13 joker input: Power Button (FF) as /class/input/input0 > Mar 3 14:43:13 joker ACPI: Power Button (FF) [PWRF] > Mar 3 14:43:13 joker input: Power Button (CM) as /class/input/input1 > Mar 3 14:43:13 joker ACPI: Power Button (CM) [PWRB] > Mar 3 14:43:13 joker input: Sleep Button (CM) as /class/input/input2 > Mar 3 14:43:13 joker ACPI: Sleep Button (CM) [SLPB] > Mar 3 14:43:13 joker isapnp: Scanning for PnP cards... > Mar 3 14:43:13 joker isapnp: No Plug & Play device found > Mar 3 14:43:13 joker Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled > Mar 3 14:43:13 joker serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > Mar 3 14:43:13 joker 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > Mar 3 14:43:13 joker RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize > Mar 3 14:43:13 joker loop: loaded (max 8 devices) > Mar 3 14:43:13 joker PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 > Mar 3 14:43:13 joker PNP: PS/2 controller doesn't have AUX irq; using default 12 > Mar 3 14:43:13 joker serio: i8042 KBD port at 0x60,0x64 irq 1 > Mar 3 14:43:13 joker serio: i8042 AUX port at 0x60,0x64 irq 12 > Mar 3 14:43:13 joker mice: PS/2 mouse device common for all mice > Mar 3 14:43:13 joker TCP cubic registered > Mar 3 14:43:13 joker NET: Registered protocol family 1 > Mar 3 14:43:13 joker NET: Registered protocol family 17 > Mar 3 14:43:13 joker Testing NMI watchdog ... OK. > Mar 3 14:43:13 joker Using IPI Shortcut mode > Mar 3 14:43:13 joker Freeing unused kernel memory: 188k freed > Mar 3 14:43:13 joker Time: tsc clocksource has been installed. > Mar 3 14:43:13 joker SCSI subsystem initialized > Mar 3 14:43:13 joker libata version 2.20 loaded. > Mar 3 14:43:13 joker pata_via 0000:00:0f.1: version 0.2.1 > Mar 3 14:43:13 joker PCI: Found IRQ 11 for device 0000:00:0f.1 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0b.2 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.1 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.0 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:12.0 > Mar 3 14:43:13 joker PCI: VIA VLink IRQ fixup for 0000:00:0f.1, from 255 to 11 > Mar 3 14:43:13 joker ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14 > Mar 3 14:43:13 joker ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15 > Mar 3 14:43:13 joker scsi0 : pata_via > Mar 3 14:43:13 joker ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 > Mar 3 14:43:13 joker ata1.00: 160086528 sectors, multi 16: LBA > Mar 3 14:43:13 joker ata1.00: configured for UDMA/133 > Mar 3 14:43:13 joker scsi1 : pata_via > Mar 3 14:43:13 joker Switched to high resolution mode on CPU 0 > Mar 3 14:43:13 joker ata2.00: ATAPI, max UDMA/33 > Mar 3 14:43:13 joker ata2.01: ATAPI, max UDMA/33 > Mar 3 14:43:13 joker ata2.00: configured for UDMA/33 > Mar 3 14:43:13 joker ata2.01: configured for UDMA/33 > Mar 3 14:43:13 joker scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 > Mar 3 14:43:13 joker scsi 1:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8526B 1.03 PQ: 0 ANSI: 5 > Mar 3 14:43:13 joker scsi 1:0:1:0: CD-ROM LITE-ON DVD SOHD-167T 9S19 PQ: 0 ANSI: 5 > Mar 3 14:43:13 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) > Mar 3 14:43:13 joker sda: Write Protect is off > Mar 3 14:43:13 joker sda: Mode Sense: 00 3a 00 00 > Mar 3 14:43:13 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Mar 3 14:43:13 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) > Mar 3 14:43:13 joker sda: Write Protect is off > Mar 3 14:43:13 joker sda: Mode Sense: 00 3a 00 00 > Mar 3 14:43:13 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA > Mar 3 14:43:13 joker sda: sda1 sda2 sda3 sda4 < sda5 sda6 > > Mar 3 14:43:13 joker sd 0:0:0:0: Attached scsi disk sda > Mar 3 14:43:13 joker sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray > Mar 3 14:43:13 joker Uniform CD-ROM driver Revision: 3.20 > Mar 3 14:43:13 joker sr 1:0:0:0: Attached scsi CD-ROM sr0 > Mar 3 14:43:13 joker sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray > Mar 3 14:43:13 joker sr 1:0:1:0: Attached scsi CD-ROM sr1 > Mar 3 14:43:13 joker kjournald starting. Commit interval 5 seconds > Mar 3 14:43:13 joker EXT3-fs: mounted filesystem with ordered data mode. > Mar 3 14:43:13 joker usbcore: registered new interface driver usbfs > Mar 3 14:43:13 joker usbcore: registered new interface driver hub > Mar 3 14:43:13 joker usbcore: registered new device driver usb > Mar 3 14:43:13 joker PCI: setting IRQ 5 as level-triggered > Mar 3 14:43:13 joker PCI: Found IRQ 5 for device 0000:00:0b.0 > Mar 3 14:43:13 joker Installing spdif_bug patch: Audigy 2 Platinum [SB0240P] > Mar 3 14:43:13 joker Real Time Clock Driver v1.12ac > Mar 3 14:43:13 joker i2c /dev entries driver > Mar 3 14:43:13 joker fuse init (API version 7.8) > Mar 3 14:43:13 joker spurious 8259A interrupt: IRQ7. > Mar 3 14:43:13 joker sd 0:0:0:0: Attached scsi generic sg0 type 0 > Mar 3 14:43:13 joker sr 1:0:0:0: Attached scsi generic sg1 type 5 > Mar 3 14:43:13 joker sr 1:0:1:0: Attached scsi generic sg2 type 5 > Mar 3 14:43:13 joker gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xec00, speed 1217kHz > Mar 3 14:43:13 joker ieee1394: Initialized config rom entry `ip1394' > Mar 3 14:43:13 joker input: PC Speaker as /class/input/input3 > Mar 3 14:43:13 joker PCI: Found IRQ 11 for device 0000:00:0b.2 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0f.1 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.1 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.0 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:12.0 > Mar 3 14:43:13 joker ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[dfff9800-dfff9fff] Max Packet=[2048] IR/IT contexts=[4/8] > Mar 3 14:43:13 joker PPP generic driver version 2.4.2 > Mar 3 14:43:13 joker parport: PnPBIOS parport detected. > Mar 3 14:43:13 joker parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] > Mar 3 14:43:13 joker rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 > Mar 3 14:43:13 joker pnp: Device 00:07 does not support disabling. > Mar 3 14:43:13 joker rtc_cmos: probe of 00:07 failed with error -16 > Mar 3 14:43:13 joker lp0: using parport0 (interrupt-driven). > Mar 3 14:43:13 joker ppdev: user-space parallel port driver > Mar 3 14:43:13 joker PCI: setting IRQ 12 as level-triggered > Mar 3 14:43:13 joker PCI: Found IRQ 12 for device 0000:00:0a.0 > Mar 3 14:43:13 joker PCI: Sharing IRQ 12 with 0000:00:10.4 > Mar 3 14:43:13 joker PCI: Sharing IRQ 12 with 0000:00:11.5 > Mar 3 14:43:13 joker rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com > Mar 3 14:43:13 joker sata_via 0000:00:0f.0: version 2.1 > Mar 3 14:43:13 joker PCI: setting IRQ 10 as level-triggered > Mar 3 14:43:13 joker PCI: Found IRQ 10 for device 0000:00:0f.0 > Mar 3 14:43:13 joker PCI: Sharing IRQ 10 with 0000:00:10.3 > Mar 3 14:43:13 joker PCI: Sharing IRQ 10 with 0000:00:10.2 > Mar 3 14:43:13 joker sata_via 0000:00:0f.0: routed to hard irq line 10 > Mar 3 14:43:13 joker ata3: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e402 bmdma 0x0001d800 irq 10 > Mar 3 14:43:13 joker ata4: SATA max UDMA/133 cmd 0x0001e000 ctl 0x0001dc02 bmdma 0x0001d808 irq 10 > Mar 3 14:43:13 joker scsi2 : sata_via > Mar 3 14:43:13 joker USB Universal Host Controller Interface driver v3.0 > Mar 3 14:43:13 joker ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300) > Mar 3 14:43:13 joker ATA: abnormal status 0x7F on port 0x0001e807 > Mar 3 14:43:13 joker scsi3 : sata_via > Mar 3 14:43:13 joker ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c00910047b3] > Mar 3 14:43:13 joker ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300) > Mar 3 14:43:13 joker ATA: abnormal status 0x7F on port 0x0001e007 > Mar 3 14:43:13 joker PCI: Found IRQ 11 for device 0000:00:10.0 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0b.2 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0f.1 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.1 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:12.0 > Mar 3 14:43:13 joker uhci_hcd 0000:00:10.0: UHCI Host Controller > Mar 3 14:43:13 joker uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 > Mar 3 14:43:13 joker uhci_hcd 0000:00:10.0: irq 11, io base 0x0000c000 > Mar 3 14:43:13 joker usb usb1: configuration #1 chosen from 1 choice > Mar 3 14:43:13 joker hub 1-0:1.0: USB hub found > Mar 3 14:43:13 joker hub 1-0:1.0: 2 ports detected > Mar 3 14:43:13 joker PCI: Found IRQ 11 for device 0000:00:10.1 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0b.2 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0f.1 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.0 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:12.0 > Mar 3 14:43:13 joker uhci_hcd 0000:00:10.1: UHCI Host Controller > Mar 3 14:43:13 joker uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 > Mar 3 14:43:13 joker uhci_hcd 0000:00:10.1: irq 11, io base 0x0000c400 > Mar 3 14:43:13 joker usb usb2: configuration #1 chosen from 1 choice > Mar 3 14:43:13 joker hub 2-0:1.0: USB hub found > Mar 3 14:43:13 joker hub 2-0:1.0: 2 ports detected > Mar 3 14:43:13 joker via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker > Mar 3 14:43:13 joker PCI: Found IRQ 10 for device 0000:00:10.2 > Mar 3 14:43:13 joker PCI: Sharing IRQ 10 with 0000:00:0f.0 > Mar 3 14:43:13 joker PCI: Sharing IRQ 10 with 0000:00:10.3 > Mar 3 14:43:13 joker uhci_hcd 0000:00:10.2: UHCI Host Controller > Mar 3 14:43:13 joker uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 > Mar 3 14:43:13 joker uhci_hcd 0000:00:10.2: irq 10, io base 0x0000c800 > Mar 3 14:43:13 joker usb usb3: configuration #1 chosen from 1 choice > Mar 3 14:43:13 joker hub 3-0:1.0: USB hub found > Mar 3 14:43:13 joker hub 3-0:1.0: 2 ports detected > Mar 3 14:43:13 joker PCI: Found IRQ 10 for device 0000:00:10.3 > Mar 3 14:43:13 joker PCI: Sharing IRQ 10 with 0000:00:0f.0 > Mar 3 14:43:13 joker PCI: Sharing IRQ 10 with 0000:00:10.2 > Mar 3 14:43:13 joker uhci_hcd 0000:00:10.3: UHCI Host Controller > Mar 3 14:43:13 joker uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 > Mar 3 14:43:13 joker uhci_hcd 0000:00:10.3: irq 10, io base 0x0000cc00 > Mar 3 14:43:13 joker usb usb4: configuration #1 chosen from 1 choice > Mar 3 14:43:13 joker hub 4-0:1.0: USB hub found > Mar 3 14:43:13 joker hub 4-0:1.0: 2 ports detected > Mar 3 14:43:13 joker PCI: Found IRQ 12 for device 0000:00:10.4 > Mar 3 14:43:13 joker PCI: Sharing IRQ 12 with 0000:00:0a.0 > Mar 3 14:43:13 joker PCI: Sharing IRQ 12 with 0000:00:11.5 > Mar 3 14:43:13 joker ehci_hcd 0000:00:10.4: EHCI Host Controller > Mar 3 14:43:13 joker ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 > Mar 3 14:43:13 joker ehci_hcd 0000:00:10.4: irq 12, io mem 0xdfff9600 > Mar 3 14:43:13 joker ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > Mar 3 14:43:13 joker usb usb5: configuration #1 chosen from 1 choice > Mar 3 14:43:13 joker hub 5-0:1.0: USB hub found > Mar 3 14:43:13 joker hub 5-0:1.0: 8 ports detected > Mar 3 14:43:13 joker input: AT Translated Set 2 keyboard as /class/input/input4 > Mar 3 14:43:13 joker PCI: Found IRQ 12 for device 0000:00:11.5 > Mar 3 14:43:13 joker PCI: Sharing IRQ 12 with 0000:00:0a.0 > Mar 3 14:43:13 joker PCI: Sharing IRQ 12 with 0000:00:10.4 > Mar 3 14:43:13 joker PCI: Setting latency timer of device 0000:00:11.5 to 64 > Mar 3 14:43:13 joker PCI: Found IRQ 11 for device 0000:00:12.0 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0b.2 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0f.1 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.1 > Mar 3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.0 > Mar 3 14:43:13 joker eth0: VIA Rhine II at 0xdfff9500, 00:0b:6a:99:27:12, IRQ 11. > Mar 3 14:43:13 joker eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0021. > Mar 3 14:43:13 joker usb 2-1: new low speed USB device using uhci_hcd and address 2 > Mar 3 14:43:13 joker EXT3 FS on sda2, internal journal > Mar 3 14:43:13 joker usb 2-1: configuration #1 chosen from 1 choice > Mar 3 14:43:13 joker usbcore: registered new interface driver hiddev > Mar 3 14:43:13 joker input: HID 1241:1177 as /class/input/input5 > Mar 3 14:43:13 joker input: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:10.1-1 > Mar 3 14:43:13 joker usbcore: registered new interface driver usbhid > Mar 3 14:43:13 joker drivers/usb/input/hid-core.c: v2.6:USB HID core driver > Mar 3 14:43:13 joker Adding 1534168k swap on /dev/disk/by-label/swap. Priority:-1 extents:1 across:1534168k > Mar 3 14:43:13 joker init: Going single user > Mar 3 14:43:29 joker shutdown[4217]: shutting down for system reboot > Mar 3 14:43:29 joker init: Switching to runlevel: 6 > Mar 3 14:43:30 joker syslog-ng[4211]: SIGTERM received, terminating; > Mar 3 14:43:30 joker syslog-ng[4211]: syslog-ng shutting down; version='2.0.0' > > > I hope that's informative. Cheers. > > Ash Just checked 2.6.21-rc2-mm1, still has the problem. Also, acpi=noirq fixes it too. To clarify, the problem is that my ps/2 port keyboard is completely frozen on boot - usually it gets activated when udev probes for hardware (my kernel config is highly modular). It worked fine with 2.6.20 and earlier with acpi taking care of interrupt routing. Ash - To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
