I'm not sure that it is a great idea to increase the number of owner IDs "just in case", rather than in response to the needs of a specific machine. Increasing the size of this field increases the size of every namespace node in the namespace. Remember, there can be thousands of namespace nodes, so this size increase may not be trivial. Also, the existing namespace node has been optimized for alignment and size such that increasing the size by 8 bits probably increases it by 32 bits as far as the memory manager is concerned (at least on some operating systems.) Our feeling (the ACPICA team) has been that the existing 8-bit owner ID is sufficient for current machines; If and when this becomes truly insufficient, we are prepared to go to a linked list model to track namespace nodes owned by a particular table or control method. Bob > -----Original Message----- > From: Aaron Young [mailto:ayoung@xxxxxxxxxxxxxxxxxxx] > Sent: Tuesday, January 30, 2007 12:39 PM > To: Moore, Robert > Cc: John Keller; linux-acpi@xxxxxxxxxxxxxxx; ayoung@xxxxxxx; linux- > ia64@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Alexey Starikovskiy; > Brown, Len > Subject: Re: [PATCH 1/1] - increase acpi owner_id max > > > > > OK, I missed that. > > > > Can you give us some idea of just how many SSDTs this machine loads? > > It depends. SGI SN configs can vary dramatically. We create a unique > SSDT for each populated PCI slot. The previous 255 SSDT id maximum > could theoretically be surpassed on machines with huge amounts of IO - > although configs with that much IO are extremely rare. We were > just trying to avoid any (future) configuration limitations. > > > > > Does it dynamically delete SSDTs also? > > Yes. Our SN hotplug driver will add or remove SSDTs from the system > upon hotplugs/hotunplugs. > > > > > Thanks, > > Bob > > > > > > > -----Original Message----- > > > From: Aaron Young [mailto:ayoung@xxxxxxxxxxxxxxxxxxx] > > > Sent: Friday, January 26, 2007 4:03 PM > > > To: Moore, Robert > > > Cc: John Keller; linux-acpi@xxxxxxxxxxxxxxx; ayoung@xxxxxxx; linux- > > > ia64@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Alexey > > Starikovskiy; > > > Brown, Len > > > Subject: Re: [PATCH 1/1] - increase acpi owner_id max > > > > > > > > > > > The OwnerId field within a namespace node is 8 bits, and this is the > > > > main constraint on the maximum OwnerId. You can't simply bump up the > > > > number of owner ids without changing this field. > > > > > > Isn't this accomplished with the mod to aclocal.h below - i.e. > > > by making a acpi_owner_id a u16 instead of a u8?: > > > > > > -typedef u8 acpi_owner_id; > > > -#define ACPI_OWNER_ID_MAX 0xFF > > > +typedef u16 acpi_owner_id; > > > +#define ACPI_OWNER_ID_MAX 0x3FF > > > > > > > > > > > If we need more than 255 owner Ids, the width of this field will > > have to > > > > be increased, or we will need to use a pointer for the field in > > order to > > > > maintain a linked list of all nodes owned by a particular owner. > > > > > > > > Bob > > > > > > > > > -----Original Message----- > > > > > From: linux-acpi-owner@xxxxxxxxxxxxxxx [mailto:linux-acpi- > > > > > owner@xxxxxxxxxxxxxxx] On Behalf Of John Keller > > > > > Sent: Friday, January 26, 2007 2:40 PM > > > > > To: linux-acpi@xxxxxxxxxxxxxxx > > > > > Cc: ayoung@xxxxxxx; linux-ia64@xxxxxxxxxxxxxxx; linux- > > > > > kernel@xxxxxxxxxxxxxxx; John Keller > > > > > Subject: [PATCH 1/1] - increase acpi owner_id max > > > > > > > > > > To support systems with large IO configurations, > > > > > this patch increases the number of available ACPI > > > > > owner ids to 1023. > > > > > > > > > > On SN platforms, we represent every populated root > > > > > bus slot with an ACPI SSDT table containing info > > > > > for every device and PPB attached to the slot. > > > > > Each SSDT requires a unique ACPI owner id. > > > > > > > > > > Signed-off-by: John Keller <jpk@xxxxxxx> > > > > > --- > > > > > > > > > > drivers/acpi/utilities/utmisc.c | 6 +++--- > > > > > include/acpi/acconfig.h | 4 ++-- > > > > > include/acpi/aclocal.h | 4 ++-- > > > > > 3 files changed, 7 insertions(+), 7 deletions(-) > > > > > > > > > > > > > > > Index: linux/drivers/acpi/utilities/utmisc.c > > > > > > > =================================================================== > > > > > --- linux.orig/drivers/acpi/utilities/utmisc.c 2007-01-25 > > > > > 11:27:25.509259412 -0600 > > > > > +++ linux/drivers/acpi/utilities/utmisc.c 2007-01-26 > > > > 13:16:09.551081284 - > > > > > 0600 > > > > > @@ -147,7 +147,7 @@ acpi_status acpi_ut_allocate_owner_id(ac > > > > > /* > > > > > * Construct encoded ID from the index > > > > and bit > > > > > position > > > > > * > > > > > - * Note: Last [j].k (bit 255) is never > > > > used and is > > > > > marked > > > > > + * Note: Last [j].k (bit 1023) is never > > > > used and > > > > > is marked > > > > > * permanently allocated (prevents +1 > > > > overflow) > > > > > */ > > > > > *owner_id = > > > > > @@ -175,7 +175,7 @@ acpi_status acpi_ut_allocate_owner_id(ac > > > > > */ > > > > > status = AE_OWNER_ID_LIMIT; > > > > > ACPI_ERROR((AE_INFO, > > > > > - "Could not allocate new OwnerId (255 max), > > > > > AE_OWNER_ID_LIMIT")); > > > > > + "Could not allocate new OwnerId (1023 max), > > > > > AE_OWNER_ID_LIMIT")); > > > > > > > > > > exit: > > > > > (void)acpi_ut_release_mutex(ACPI_MTX_CACHES); > > > > > @@ -192,7 +192,7 @@ acpi_status acpi_ut_allocate_owner_id(ac > > > > > * control method or unloading a table. Either way, > > we > > > > would > > > > > * ignore any error anyway. > > > > > * > > > > > - * DESCRIPTION: Release a table or method owner ID. Valid IDs > > are 1 > > > > - > > > > > 255 > > > > > + * DESCRIPTION: Release a table or method owner ID. Valid IDs > > are 1 > > > > - > > > > > 1023 > > > > > * > > > > > > > > > > > > > > > > ************************************************************************ > > > > ** > > > > > ****/ > > > > > > > > > > Index: linux/include/acpi/acconfig.h > > > > > > > =================================================================== > > > > > --- linux.orig/include/acpi/acconfig.h 2007-01-25 > > > > 11:27:25.577267818 - > > > > > 0600 > > > > > +++ linux/include/acpi/acconfig.h 2007-01-26 13:17:14.111002597 > > > > -0600 > > > > > @@ -111,9 +111,9 @@ > > > > > > > > > > #define ACPI_SYSMEM_REGION_WINDOW_SIZE 4096 > > > > > > > > > > -/* owner_id tracking. 8 entries allows for 255 owner_ids */ > > > > > +/* owner_id tracking. 32 entries allow for 1023 owner_ids */ > > > > > > > > > > -#define ACPI_NUM_OWNERID_MASKS 8 > > > > > +#define ACPI_NUM_OWNERID_MASKS 32 > > > > > > > > > > > > > > > > > > > > > /*********************************************************************** > > > > ** > > > > > ***** > > > > > * > > > > > Index: linux/include/acpi/aclocal.h > > > > > > > =================================================================== > > > > > --- linux.orig/include/acpi/aclocal.h 2007-01-25 > > 11:27:25.585268807 - > > > > > 0600 > > > > > +++ linux/include/acpi/aclocal.h 2007-01-26 13:20:06.148115848 > > > > -0600 > > > > > @@ -122,8 +122,8 @@ static char *acpi_gbl_mutex_names[ACPI_N > > > > > > > > > > /* Owner IDs are used to track namespace nodes for selective > > deletion > > > > */ > > > > > > > > > > -typedef u8 acpi_owner_id; > > > > > -#define ACPI_OWNER_ID_MAX 0xFF > > > > > +typedef u16 acpi_owner_id; > > > > > +#define ACPI_OWNER_ID_MAX 0x3FF > > > > > > > > > > /* This Thread ID means that the mutex is not in use (unlocked) > > */ > > > > > > > > > > - > > > > > To unsubscribe from this list: send the line "unsubscribe > > linux-acpi" > > > > in > > > > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > > > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > > > - > > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > - To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
