From: Corentin Chary <corentincj@xxxxxxxxxx>
/sys/.../asus-laptop/display can now be used to switch displays
like the old /proc/acpi/asus/disp does
Signed-off-by: Corentin Chary <corentincj@xxxxxxxxxx>
---
drivers/misc/asus-laptop.c | 82 +++++++++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff -Naur a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c
--- a/drivers/misc/asus-laptop.c 2007-01-26 13:00:56.000000000 +0100
+++ b/drivers/misc/asus-laptop.c 2007-01-26 13:01:08.000000000 +0100
@@ -125,6 +125,23 @@
"\\_SB.PCI0.PX40.Q10", /* S1x */
"\\Q10"); /* A2x, L2D, L3D, M2E */
+/* Display */
+ASUS_HANDLE(display_set, ASUS_HOTK_PREFIX "SDSP");
+ASUS_HANDLE(display_get,
+ "\\_SB.PCI0.P0P1.VGA.GETD", /* A6B, A6K A6R A7D F3JM L4R M6R A3G
+ M6A M6V VX-1 V6J V6V W3Z */
+ "\\_SB.PCI0.P0P2.VGA.GETD", /* A3E A4K, A4D A4L A6J A7J A8J Z71V M9V
+ S5A M5A z33A W1Jc W2V */
+ "\\_SB.PCI0.P0P3.VGA.GETD", /* A6V A6Q */
+ "\\_SB.PCI0.P0PA.VGA.GETD", /* A6T, A6M */
+ "\\_SB.PCI0.PCI1.VGAC.NMAP", /* L3C */
+ "\\_SB.PCI0.VGA.GETD", /* Z96F */
+ "\\ACTD", /* A2D */
+ "\\ADVG", /* A4G Z71A W1N W5A W5F M2N M3N M5N M6N S1N S5N */
+ "\\DNXT", /* P30 */
+ "\\INFB", /* A2H D1 L2D L3D L3H L2E L5D L5C M1A M2E L4L W3V */
+ "\\SSTE"); /* A3F A6F A3N A3L M6N W3N W6A */
+
/*
* This is the main structure, we can use it to store anything interesting
* about the hotk device
@@ -491,6 +508,60 @@
return store_status(buf, count, bt_switch_handle, BT_ON, 0);
}
+/*
+ * Display
+ */
+static void set_display(int value)
+{
+ /* no sanity check needed for now */
+ if (!write_acpi_int(display_set_handle, NULL, value, NULL))
+ printk(ASUS_WARNING "Error setting display\n");
+ return;
+}
+
+static int read_display(void)
+{
+ int value = 0;
+
+ /* In most of the case, we know how to set the display, but sometime
+ we can't read it */
+ if(display_get_handle) {
+ if (!read_acpi_int(display_get_handle, NULL, &value, NULL))
+ printk(ASUS_WARNING "Error reading display status\n");
+ }
+
+ value &= 0x0F; /* needed for some models, shouldn't hurt others */
+
+ return value;
+}
+/*
+ * Now, *this* one could be more user-friendly, but so far, no-one has
+ * complained. The significance of bits is the same as in store_disp()
+ */
+static ssize_t show_disp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", read_display());
+}
+
+/*
+ * Experimental support for display switching. As of now: 1 should activate
+ * the LCD output, 2 should do for CRT, 4 for TV-Out and 8 for DVI.
+ * Any combination (bitwise) of these will suffice. I never actually tested 4
+ * displays hooked up simultaneously, so be warned. See the acpi4asus README
+ * for more info.
+ */
+static ssize_t store_disp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int rv, value;
+
+ rv = parse_arg(buf, count, &value);
+ if (rv > 0)
+ set_display(value);
+ return rv;
+}
+
static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
{
/* TODO Find a better way to handle events count. */
@@ -535,11 +606,13 @@
static ASUS_CREATE_DEVICE_ATTR(infos);
static ASUS_CREATE_DEVICE_ATTR(wlan);
static ASUS_CREATE_DEVICE_ATTR(bluetooth);
+static ASUS_CREATE_DEVICE_ATTR(display);
static struct attribute *asuspf_attributes[] = {
&dev_attr_infos.attr,
&dev_attr_wlan.attr,
&dev_attr_bluetooth.attr,
+ &dev_attr_display.attr,
NULL
};
@@ -567,6 +640,12 @@
if (bt_switch_handle)
ASUS_SET_DEVICE_ATTR(bluetooth, 0644,
show_bluetooth, store_bluetooth);
+
+ if (display_set_handle && display_get_handle)
+ ASUS_SET_DEVICE_ATTR(display, 0644, show_disp, store_disp);
+ else if(display_set_handle)
+ ASUS_SET_DEVICE_ATTR(display, 0200, NULL, store_disp);
+
}
static int asus_handle_init(char *name, acpi_handle *handle,
@@ -683,6 +762,9 @@
ASUS_HANDLE_INIT(lcd_switch);
+ ASUS_HANDLE_INIT(display_set);
+ ASUS_HANDLE_INIT(display_get);
+
kfree(model);
return AE_OK;
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
