Re: 2.6.19 and up to 2.6.20-rc2 Ethernet problems x86_64

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> ..same problem with 2.6.20-rc3. Last worked with 
> 2.6.19-rc6-git12, so it was 2.6.19 where it failed.


> Attaching both case1 normal, case2 acpi=noirq. With acpi=noirq ethernet 
> doesn't get configured, route -n says it's an Unsupported operation, 
> ifconfig only shows for localhost, ifconfig eth0 192.168.10.5 also 
> complains of a config error.

It seems that the "acpi=noirq" (and probably also the acpi=off) case
is simply an additional broken case, not a success case to compare to.

The thing we really want to compare is dmesg and /proc/interrupts
from 2.6.19-rc6-git12, and the broken current release.
Perhaps you can put that info in the bug report when you file it.

thanks,
-Len

-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux