Re: [patch 15/19] Altix: ACPI SSDT PCI device support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tony,
 What is the status of this patch? Is it still possible to
get this, and Altix: Add ACPI SSDT PCI device support (hotplug)
into 2.6.20?  I see that the ACPI patch that these are dependent on has
been pulled into Linus' tree.

Thanks,
John


> 
> Acked-By: Len Brown <len.brown@xxxxxxxxx>
> 
> Tony,
> This should probably be sent via your tree.
> 
> thanks,
> -Len
> 
> On Tuesday 19 December 2006 15:56, akpm@xxxxxxxx wrote:
> > From: John Keller <jpk@xxxxxxx>
> > 
> > Add SN platform support for running with an ACPI
> > capable PROM that defines PCI devices in SSDT
> > tables. There is a SSDT table for every occupied
> > slot on a root bus, containing info for every
> > PPB and/or device on the bus. The SSDTs will be
> > dynamically loaded/unloaded at hotplug enable/disable.
> > 
> > Platform specific information that is currently
> > passed via a SAL call, will now be passed via the
> > Vendor resource in the ACPI Device object(s) defined
> > in each SSDT.
> > 
> > Signed-off-by: John Keller <jpk@xxxxxxx>
> > Cc: "Brown, Len" <len.brown@xxxxxxxxx>
> > Cc: Greg KH <greg@xxxxxxxxx>
> > Cc: "Luck, Tony" <tony.luck@xxxxxxxxx>
> > Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
> > ---
> > 
> >  arch/ia64/sn/kernel/io_acpi_init.c      |  314 ++++++++++++++++++++--
> >  arch/ia64/sn/kernel/io_common.c         |   68 ----
> >  arch/ia64/sn/kernel/io_init.c           |   54 +++
> >  arch/ia64/sn/pci/pcibr/pcibr_provider.c |    6 
> >  include/asm-ia64/sn/acpi.h              |    5 
> >  include/asm-ia64/sn/pcibr_provider.h    |    2 
> >  include/asm-ia64/sn/pcidev.h            |    8 
> >  7 files changed, 362 insertions(+), 95 deletions(-)
> > 
> > diff -puN arch/ia64/sn/kernel/io_acpi_init.c~altix-acpi-ssdt-pci-device-support arch/ia64/sn/kernel/io_acpi_init.c
> > --- a/arch/ia64/sn/kernel/io_acpi_init.c~altix-acpi-ssdt-pci-device-support
> > +++ a/arch/ia64/sn/kernel/io_acpi_init.c
> > @@ -13,6 +13,7 @@
> >  #include <asm/sn/sn_sal.h>
> >  #include "xtalk/hubdev.h"
> >  #include <linux/acpi.h>
> > +#include <acpi/acnamesp.h>
> >  
> >  
> >  /*
> > @@ -31,6 +32,12 @@ struct acpi_vendor_uuid sn_uuid = {
> >  		    0xa2, 0x7c, 0x08, 0x00, 0x69, 0x13, 0xea, 0x51 },
> >  };
> >  
> > +struct sn_pcidev_match {
> > +	u8 bus;
> > +	unsigned int devfn;
> > +	acpi_handle handle;
> > +};
> > +
> >  /*
> >   * Perform the early IO init in PROM.
> >   */
> > @@ -119,9 +126,11 @@ sn_get_bussoft_ptr(struct pci_bus *bus)
> >  	status = acpi_get_vendor_resource(handle, METHOD_NAME__CRS,
> >  					  &sn_uuid, &buffer);
> >  	if (ACPI_FAILURE(status)) {
> > -		printk(KERN_ERR "get_acpi_pcibus_ptr: "
> > -		       "get_acpi_bussoft_info() failed: %d\n",
> > -		       status);
> > +		printk(KERN_ERR "%s: "
> > +		       "acpi_get_vendor_resource() failed (0x%x) for: ",
> > +		       __FUNCTION__, status);
> > +		acpi_ns_print_node_pathname(handle, NULL);
> > +		printk("\n");
> >  		return NULL;
> >  	}
> >  	resource = buffer.pointer;
> > @@ -130,8 +139,8 @@ sn_get_bussoft_ptr(struct pci_bus *bus)
> >  	if ((vendor->byte_length - sizeof(struct acpi_vendor_uuid)) !=
> >  	     sizeof(struct pcibus_bussoft *)) {
> >  		printk(KERN_ERR
> > -		       "get_acpi_bussoft_ptr: Invalid vendor data "
> > -		       "length %d\n", vendor->byte_length);
> > +		       "%s: Invalid vendor data length %d\n",
> > +			__FUNCTION__, vendor->byte_length);
> >  		kfree(buffer.pointer);
> >  		return NULL;
> >  	}
> > @@ -143,34 +152,254 @@ sn_get_bussoft_ptr(struct pci_bus *bus)
> >  }
> >  
> >  /*
> > - * sn_acpi_bus_fixup
> > + * sn_extract_device_info - Extract the pcidev_info and the sn_irq_info
> > + *			    pointers from the vendor resource using the
> > + *			    provided acpi handle, and copy the structures
> > + *			    into the argument buffers.
> >   */
> > -void
> > -sn_acpi_bus_fixup(struct pci_bus *bus)
> > +static int
> > +sn_extract_device_info(acpi_handle handle, struct pcidev_info **pcidev_info,
> > +		    struct sn_irq_info **sn_irq_info)
> >  {
> > -	struct pci_dev *pci_dev = NULL;
> > -	struct pcibus_bussoft *prom_bussoft_ptr;
> > -	extern void sn_common_bus_fixup(struct pci_bus *,
> > -					struct pcibus_bussoft *);
> > +	u64 addr;
> > +	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
> > +	struct sn_irq_info *irq_info, *irq_info_prom;
> > +	struct pcidev_info *pcidev_ptr, *pcidev_prom_ptr;
> > +	struct acpi_resource *resource;
> > +	int ret = 0;
> > +	acpi_status status;
> > +	struct acpi_resource_vendor_typed *vendor;
> >  
> > -	if (!bus->parent) {	/* If root bus */
> > -		prom_bussoft_ptr = sn_get_bussoft_ptr(bus);
> > -		if (prom_bussoft_ptr == NULL) {
> > +	/*
> > +	 * The pointer to this device's pcidev_info structure in
> > +	 * the PROM, is in the vendor resource.
> > +	 */
> > +	status = acpi_get_vendor_resource(handle, METHOD_NAME__CRS,
> > +					  &sn_uuid, &buffer);
> > +	if (ACPI_FAILURE(status)) {
> > +		printk(KERN_ERR
> > +		       "%s: acpi_get_vendor_resource() failed (0x%x) for: ",
> > +		        __FUNCTION__, status);
> > +		acpi_ns_print_node_pathname(handle, NULL);
> > +		printk("\n");
> > +		return 1;
> > +	}
> > +
> > +	resource = buffer.pointer;
> > +	vendor = &resource->data.vendor_typed;
> > +	if ((vendor->byte_length - sizeof(struct acpi_vendor_uuid)) !=
> > +	    sizeof(struct pci_devdev_info *)) {
> > +		printk(KERN_ERR
> > +		       "%s: Invalid vendor data length: %d for: ",
> > +		        __FUNCTION__, vendor->byte_length);
> > +		acpi_ns_print_node_pathname(handle, NULL);
> > +		printk("\n");
> > +		ret = 1;
> > +		goto exit;
> > +	}
> > +
> > +	pcidev_ptr = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
> > +	if (!pcidev_ptr)
> > +		panic("%s: Unable to alloc memory for pcidev_info", __FUNCTION__);
> > +
> > +	memcpy(&addr, vendor->byte_data, sizeof(struct pcidev_info *));
> > +	pcidev_prom_ptr = __va(addr);
> > +	memcpy(pcidev_ptr, pcidev_prom_ptr, sizeof(struct pcidev_info));
> > +
> > +	/* Get the IRQ info */
> > +	irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
> > +	if (!irq_info)
> > +		 panic("%s: Unable to alloc memory for sn_irq_info", __FUNCTION__);
> > +
> > +	if (pcidev_ptr->pdi_sn_irq_info) {
> > +		irq_info_prom = __va(pcidev_ptr->pdi_sn_irq_info);
> > +		memcpy(irq_info, irq_info_prom, sizeof(struct sn_irq_info));
> > +	}
> > +
> > +	*pcidev_info = pcidev_ptr;
> > +	*sn_irq_info = irq_info;
> > +
> > +exit:
> > +	kfree(buffer.pointer);
> > +	return ret;
> > +}
> > +
> > +static unsigned int
> > +get_host_devfn(acpi_handle device_handle, acpi_handle rootbus_handle)
> > +{
> > +	unsigned long adr;
> > +	acpi_handle child;
> > +	unsigned int devfn;
> > +	int function;
> > +	acpi_handle parent;
> > +	int slot;
> > +	acpi_status status;
> > +
> > +	/*
> > +	 * Do an upward search to find the root bus device, and
> > +	 * obtain the host devfn from the previous child device.
> > +	 */
> > +	child = device_handle;
> > +	while (child) {
> > +		status = acpi_get_parent(child, &parent);
> > +		if (ACPI_FAILURE(status)) {
> > +			printk(KERN_ERR "%s: acpi_get_parent() failed "
> > +			       "(0x%x) for: ", __FUNCTION__, status);
> > +			acpi_ns_print_node_pathname(child, NULL);
> > +			printk("\n");
> > +			panic("%s: Unable to find host devfn\n", __FUNCTION__);
> > +		}
> > +		if (parent == rootbus_handle)
> > +			break;
> > +		child = parent;
> > +	}
> > +	if (!child) {
> > +		printk(KERN_ERR "%s: Unable to find root bus for: ",
> > +		       __FUNCTION__);
> > +		acpi_ns_print_node_pathname(device_handle, NULL);
> > +		printk("\n");
> > +		BUG();
> > +	}
> > +
> > +	status = acpi_evaluate_integer(child, METHOD_NAME__ADR, NULL, &adr);
> > +	if (ACPI_FAILURE(status)) {
> > +		printk(KERN_ERR "%s: Unable to get _ADR (0x%x) for: ",
> > +		       __FUNCTION__, status);
> > +		acpi_ns_print_node_pathname(child, NULL);
> > +		printk("\n");
> > +		panic("%s: Unable to find host devfn\n", __FUNCTION__);
> > +	}
> > +
> > +	slot = (adr >> 16) & 0xffff;
> > +       	function = adr & 0xffff;
> > +	devfn = PCI_DEVFN(slot, function);
> > +	return devfn;
> > +}
> > +
> > +/*
> > + * find_matching_device - Callback routine to find the ACPI device
> > + *			  that matches up with our pci_dev device.
> > + *			  Matching is done on bus number and devfn.
> > + *			  To find the bus number for a particular
> > + *			  ACPI device, we must look at the _BBN method
> > + *			  of its parent.
> > + */
> > +static acpi_status
> > +find_matching_device(acpi_handle handle, u32 lvl, void *context, void **rv)
> > +{
> > +	unsigned long bbn = -1;
> > +	unsigned long adr;
> > +	acpi_handle parent = NULL;
> > +	acpi_status status;
> > +	unsigned int devfn;
> > +	int function;
> > +	int slot;
> > +	struct sn_pcidev_match *info = context;
> > +
> > +        status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL,
> > +                                       &adr);
> > +        if (ACPI_SUCCESS(status)) {
> > +		status = acpi_get_parent(handle, &parent);
> > +		if (ACPI_FAILURE(status)) {
> >  			printk(KERN_ERR
> > -			       "sn_pci_fixup_bus: 0x%04x:0x%02x Unable to "
> > -			       "obtain prom_bussoft_ptr\n",
> > -			       pci_domain_nr(bus), bus->number);
> > -			return;
> > +			       "%s: acpi_get_parent() failed (0x%x) for: ",
> > +		       		__FUNCTION__, status);
> > +			acpi_ns_print_node_pathname(handle, NULL);
> > +			printk("\n");
> > +			return AE_OK;
> > +		}
> > +		status = acpi_evaluate_integer(parent, METHOD_NAME__BBN,
> > +					       NULL, &bbn);
> > +		if (ACPI_FAILURE(status)) {
> > +			printk(KERN_ERR
> > +			  "%s: Failed to find _BBN in parent of: ",
> > +		       		__FUNCTION__);
> > +			acpi_ns_print_node_pathname(handle, NULL);
> > +			printk("\n");
> > +			return AE_OK;
> > +		}
> > +
> > +                slot = (adr >> 16) & 0xffff;
> > +                function = adr & 0xffff;
> > +                devfn = PCI_DEVFN(slot, function);
> > +                if ((info->devfn == devfn) && (info->bus == bbn)) {
> > +			/* We have a match! */
> > +			info->handle = handle;
> > +			return 1;
> >  		}
> > -		sn_common_bus_fixup(bus, prom_bussoft_ptr);
> >  	}
> > -	list_for_each_entry(pci_dev, &bus->devices, bus_list) {
> > -		sn_pci_fixup_slot(pci_dev);
> > +	return AE_OK;
> > +}
> > +
> > +/*
> > + * sn_acpi_get_pcidev_info - Search ACPI namespace for the acpi
> > + *			     device matching the specified pci_dev,
> > + *			     and return the pcidev info and irq info.
> > + */
> > +int
> > +sn_acpi_get_pcidev_info(struct pci_dev *dev, struct pcidev_info **pcidev_info,
> > +			struct sn_irq_info **sn_irq_info)
> > +{
> > +	unsigned int host_devfn;
> > +	struct sn_pcidev_match pcidev_match;
> > +	acpi_handle rootbus_handle;
> > +	unsigned long segment;
> > +	acpi_status status;
> > +
> > +	rootbus_handle = PCI_CONTROLLER(dev)->acpi_handle;
> > +        status = acpi_evaluate_integer(rootbus_handle, METHOD_NAME__SEG, NULL,
> > +                                       &segment);
> > +        if (ACPI_SUCCESS(status)) {
> > +		if (segment != pci_domain_nr(dev)) {
> > +			printk(KERN_ERR
> > +			       "%s: Segment number mismatch, 0x%lx vs 0x%x for: ",
> > +			       __FUNCTION__, segment, pci_domain_nr(dev));
> > +			acpi_ns_print_node_pathname(rootbus_handle, NULL);
> > +			printk("\n");
> > +			return 1;
> > +		}
> > +	} else {
> > +		printk(KERN_ERR "%s: Unable to get __SEG from: ",
> > +		       __FUNCTION__);
> > +		acpi_ns_print_node_pathname(rootbus_handle, NULL);
> > +		printk("\n");
> > +		return 1;
> >  	}
> > +
> > +	/*
> > +	 * We want to search all devices in this segment/domain
> > +	 * of the ACPI namespace for the matching ACPI device,
> > +	 * which holds the pcidev_info pointer in its vendor resource.
> > +	 */
> > +	pcidev_match.bus = dev->bus->number;
> > +	pcidev_match.devfn = dev->devfn;
> > +	pcidev_match.handle = NULL;
> > +
> > +	acpi_walk_namespace(ACPI_TYPE_DEVICE, rootbus_handle, ACPI_UINT32_MAX,
> > +			    find_matching_device, &pcidev_match, NULL);
> > +
> > +	if (!pcidev_match.handle) {
> > +		printk(KERN_ERR
> > +		       "%s: Could not find matching ACPI device for %s.\n",
> > +		       __FUNCTION__, pci_name(dev));
> > +		return 1;
> > +	}
> > +
> > +	if (sn_extract_device_info(pcidev_match.handle, pcidev_info, sn_irq_info))
> > +		return 1;
> > +
> > +	/* Build up the pcidev_info.pdi_slot_host_handle */
> > +	host_devfn = get_host_devfn(pcidev_match.handle, rootbus_handle);
> > +	(*pcidev_info)->pdi_slot_host_handle =
> > +			((unsigned long) pci_domain_nr(dev) << 40) |
> > +					/* bus == 0 */
> > +					host_devfn;
> > +	return 0;
> >  }
> >  
> >  /*
> > - * sn_acpi_slot_fixup - Perform any SN specific slot fixup.
> > + * sn_acpi_slot_fixup - Obtain the pcidev_info and sn_irq_info.
> > + *			Perform any SN specific slot fixup.
> >   *			At present there does not appear to be
> >   *			any generic way to handle a ROM image
> >   *			that has been shadowed by the PROM, so
> > @@ -179,11 +408,18 @@ sn_acpi_bus_fixup(struct pci_bus *bus)
> >   */
> >  
> >  void
> > -sn_acpi_slot_fixup(struct pci_dev *dev, struct pcidev_info *pcidev_info)
> > +sn_acpi_slot_fixup(struct pci_dev *dev)
> >  {
> >  	void __iomem *addr;
> > +	struct pcidev_info *pcidev_info = NULL;
> > +	struct sn_irq_info *sn_irq_info = NULL;
> >  	size_t size;
> >  
> > +	if (sn_acpi_get_pcidev_info(dev, &pcidev_info, &sn_irq_info)) {
> > +		panic("%s:  Failure obtaining pcidev_info for %s\n",
> > +		      __FUNCTION__, pci_name(dev));
> > +	}
> > +
> >  	if (pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE]) {
> >  		/*
> >  		 * A valid ROM image exists and has been shadowed by the
> > @@ -200,8 +436,11 @@ sn_acpi_slot_fixup(struct pci_dev *dev, 
> >  						(unsigned long) addr + size;
> >  		dev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_BIOS_COPY;
> >  	}
> > +	sn_pci_fixup_slot(dev, pcidev_info, sn_irq_info);
> >  }
> >  
> > +EXPORT_SYMBOL(sn_acpi_slot_fixup);
> > +
> >  static struct acpi_driver acpi_sn_hubdev_driver = {
> >  	.name = "SGI HUBDEV Driver",
> >  	.ids = "SGIHUB,SGITIO",
> > @@ -212,6 +451,33 @@ static struct acpi_driver acpi_sn_hubdev
> >  
> >  
> >  /*
> > + * sn_acpi_bus_fixup -  Perform SN specific setup of software structs
> > + *			(pcibus_bussoft, pcidev_info) and hardware
> > + *			registers, for the specified bus and devices under it.
> > + */
> > +void
> > +sn_acpi_bus_fixup(struct pci_bus *bus)
> > +{
> > +	struct pci_dev *pci_dev = NULL;
> > +	struct pcibus_bussoft *prom_bussoft_ptr;
> > +
> > +	if (!bus->parent) {	/* If root bus */
> > +		prom_bussoft_ptr = sn_get_bussoft_ptr(bus);
> > +		if (prom_bussoft_ptr == NULL) {
> > +			printk(KERN_ERR
> > +			       "%s: 0x%04x:0x%02x Unable to "
> > +			       "obtain prom_bussoft_ptr\n",
> > +			       __FUNCTION__, pci_domain_nr(bus), bus->number);
> > +			return;
> > +		}
> > +		sn_common_bus_fixup(bus, prom_bussoft_ptr);
> > +	}
> > +	list_for_each_entry(pci_dev, &bus->devices, bus_list) {
> > +		sn_acpi_slot_fixup(pci_dev);
> > +	}
> > +}
> > +
> > +/*
> >   * sn_io_acpi_init - PROM has ACPI support for IO, defining at a minimum the
> >   *		     nodes and root buses in the DSDT. As a result, bus scanning
> >   *		     will be initiated by the Linux ACPI code.
> > diff -puN arch/ia64/sn/kernel/io_common.c~altix-acpi-ssdt-pci-device-support arch/ia64/sn/kernel/io_common.c
> > --- a/arch/ia64/sn/kernel/io_common.c~altix-acpi-ssdt-pci-device-support
> > +++ a/arch/ia64/sn/kernel/io_common.c
> > @@ -26,14 +26,10 @@
> >  #include <linux/acpi.h>
> >  #include <asm/sn/sn2/sn_hwperf.h>
> >  #include <asm/sn/acpi.h>
> > +#include "acpi/acglobal.h"
> >  
> >  extern void sn_init_cpei_timer(void);
> >  extern void register_sn_procfs(void);
> > -extern void sn_acpi_bus_fixup(struct pci_bus *);
> > -extern void sn_bus_fixup(struct pci_bus *);
> > -extern void sn_acpi_slot_fixup(struct pci_dev *, struct pcidev_info *);
> > -extern void sn_more_slot_fixup(struct pci_dev *, struct pcidev_info *);
> > -extern void sn_legacy_pci_window_fixup(struct pci_controller *, u64, u64);
> >  extern void sn_io_acpi_init(void);
> >  extern void sn_io_init(void);
> >  
> > @@ -48,6 +44,9 @@ struct sysdata_el {
> >  
> >  int sn_ioif_inited;		/* SN I/O infrastructure initialized? */
> >  
> > +int sn_acpi_rev;		/* SN ACPI revision */
> > +EXPORT_SYMBOL_GPL(sn_acpi_rev);
> > +
> >  struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES];	/* indexed by asic type */
> >  
> >  /*
> > @@ -99,25 +98,6 @@ sal_get_device_dmaflush_list(u64 nasid, 
> >  }
> >  
> >  /*
> > - * Retrieve the pci device information given the bus and device|function number.
> > - */
> > -static inline u64
> > -sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev,
> > -		    u64 sn_irq_info)
> > -{
> > -	struct ia64_sal_retval ret_stuff;
> > -	ret_stuff.status = 0;
> > -	ret_stuff.v0 = 0;
> > -
> > -	SAL_CALL_NOLOCK(ret_stuff,
> > -			(u64) SN_SAL_IOIF_GET_PCIDEV_INFO,
> > -			(u64) segment, (u64) bus_number, (u64) devfn,
> > -			(u64) pci_dev,
> > -			sn_irq_info, 0, 0);
> > -	return ret_stuff.v0;
> > -}
> > -
> > -/*
> >   * sn_pcidev_info_get() - Retrieve the pcidev_info struct for the specified
> >   *			  device.
> >   */
> > @@ -249,47 +229,22 @@ void sn_pci_unfixup_slot(struct pci_dev 
> >  }
> >  
> >  /*
> > - * sn_pci_fixup_slot() - This routine sets up a slot's resources consistent
> > - *			 with the Linux PCI abstraction layer. Resources
> > - *			 acquired from our PCI provider include PIO maps
> > - *			 to BAR space and interrupt objects.
> > + * sn_pci_fixup_slot()
> >   */
> > -void sn_pci_fixup_slot(struct pci_dev *dev)
> > +void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *pcidev_info,
> > +		       struct sn_irq_info *sn_irq_info)
> >  {
> >  	int segment = pci_domain_nr(dev->bus);
> > -	int status = 0;
> >  	struct pcibus_bussoft *bs;
> >   	struct pci_bus *host_pci_bus;
> >   	struct pci_dev *host_pci_dev;
> > -	struct pcidev_info *pcidev_info;
> > - 	struct sn_irq_info *sn_irq_info;
> >   	unsigned int bus_no, devfn;
> >  
> >  	pci_dev_get(dev); /* for the sysdata pointer */
> > -	pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
> > -	if (!pcidev_info)
> > -		BUG();		/* Cannot afford to run out of memory */
> > -
> > -	sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
> > -	if (!sn_irq_info)
> > -		BUG();		/* Cannot afford to run out of memory */
> > -
> > -	/* Call to retrieve pci device information needed by kernel. */
> > -	status = sal_get_pcidev_info((u64) segment, (u64) dev->bus->number,
> > -				     dev->devfn,
> > -				     (u64) __pa(pcidev_info),
> > -				     (u64) __pa(sn_irq_info));
> > -	if (status)
> > -		BUG(); /* Cannot get platform pci device information */
> >  
> >  	/* Add pcidev_info to list in pci_controller.platform_data */
> >  	list_add_tail(&pcidev_info->pdi_list,
> >  		      &(SN_PLATFORM_DATA(dev->bus)->pcidev_info));
> > -
> > -	if (SN_ACPI_BASE_SUPPORT())
> > -		sn_acpi_slot_fixup(dev, pcidev_info);
> > -	else
> > -		sn_more_slot_fixup(dev, pcidev_info);
> >  	/*
> >  	 * Using the PROMs values for the PCI host bus, get the Linux
> >   	 * PCI host_pci_dev struct and set up host bus linkages
> > @@ -489,11 +444,6 @@ void sn_generate_path(struct pci_bus *pc
> >  			sprintf(address, "%s^%d", address, geo_slot(geoid));
> >  }
> >  
> > -/*
> > - * sn_pci_fixup_bus() - Perform SN specific setup of software structs
> > - *			(pcibus_bussoft, pcidev_info) and hardware
> > - *			registers, for the specified bus and devices under it.
> > - */
> >  void __devinit
> >  sn_pci_fixup_bus(struct pci_bus *bus)
> >  {
> > @@ -519,6 +469,9 @@ sn_io_early_init(void)
> >  	if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM())
> >  		return 0;
> >  
> > +	/* we set the acpi revision to that of the DSDT table OEM rev. */
> > +	sn_acpi_rev = acpi_gbl_DSDT->oem_revision;
> > +
> >  	/*
> >  	 * prime sn_pci_provider[].  Individial provider init routines will
> >  	 * override their respective default entries.
> > @@ -605,7 +558,6 @@ sn_io_late_init(void)
> >  
> >  fs_initcall(sn_io_late_init);
> >  
> > -EXPORT_SYMBOL(sn_pci_fixup_slot);
> >  EXPORT_SYMBOL(sn_pci_unfixup_slot);
> >  EXPORT_SYMBOL(sn_bus_store_sysdata);
> >  EXPORT_SYMBOL(sn_bus_free_sysdata);
> > diff -puN arch/ia64/sn/kernel/io_init.c~altix-acpi-ssdt-pci-device-support arch/ia64/sn/kernel/io_init.c
> > --- a/arch/ia64/sn/kernel/io_init.c~altix-acpi-ssdt-pci-device-support
> > +++ a/arch/ia64/sn/kernel/io_init.c
> > @@ -56,6 +56,25 @@ static inline u64 sal_get_pcibus_info(u6
> >  	return ret_stuff.v0;
> >  }
> >  
> > +/*
> > + * Retrieve the pci device information given the bus and device|function number.
> > + */
> > +static inline u64
> > +sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev,
> > +		    u64 sn_irq_info)
> > +{
> > +	struct ia64_sal_retval ret_stuff;
> > +	ret_stuff.status = 0;
> > +	ret_stuff.v0 = 0;
> > +
> > +	SAL_CALL_NOLOCK(ret_stuff,
> > +			(u64) SN_SAL_IOIF_GET_PCIDEV_INFO,
> > +			(u64) segment, (u64) bus_number, (u64) devfn,
> > +			(u64) pci_dev,
> > +			sn_irq_info, 0, 0);
> > +	return ret_stuff.v0;
> > +}
> > +
> >  
> >  /*
> >   * sn_fixup_ionodes() - This routine initializes the HUB data structure for
> > @@ -172,18 +191,40 @@ sn_pci_window_fixup(struct pci_dev *dev,
> >  }
> >  
> >  /*
> > - * sn_more_slot_fixup() - We are not running with an ACPI capable PROM,
> > + * sn_io_slot_fixup() -   We are not running with an ACPI capable PROM,
> >   *			  and need to convert the pci_dev->resource
> >   *			  'start' and 'end' addresses to mapped addresses,
> >   *			  and setup the pci_controller->window array entries.
> >   */
> >  void
> > -sn_more_slot_fixup(struct pci_dev *dev, struct pcidev_info *pcidev_info)
> > +sn_io_slot_fixup(struct pci_dev *dev)
> >  {
> >  	unsigned int count = 0;
> >  	int idx;
> >  	s64 pci_addrs[PCI_ROM_RESOURCE + 1];
> >  	unsigned long addr, end, size, start;
> > +	struct pcidev_info *pcidev_info;
> > +	struct sn_irq_info *sn_irq_info;
> > +	int status;
> > +
> > +	pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
> > +	if (!pcidev_info)
> > +		panic("%s: Unable to alloc memory for pcidev_info", __FUNCTION__);
> > +
> > +	sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
> > +	if (!sn_irq_info)
> > +		panic("%s: Unable to alloc memory for sn_irq_info", __FUNCTION__);
> > +
> > +	/* Call to retrieve pci device information needed by kernel. */
> > +	status = sal_get_pcidev_info((u64) pci_domain_nr(dev),
> > +		(u64) dev->bus->number,
> > +		dev->devfn,
> > +		(u64) __pa(pcidev_info),
> > +		(u64) __pa(sn_irq_info));
> > +
> > +	if (status)
> > +		BUG(); /* Cannot get platform pci device information */
> > +
> >  
> >  	/* Copy over PIO Mapped Addresses */
> >  	for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
> > @@ -219,8 +260,12 @@ sn_more_slot_fixup(struct pci_dev *dev, 
> >  	 */
> >  	if (count > 0)
> >  		sn_pci_window_fixup(dev, count, pci_addrs);
> > +
> > +	sn_pci_fixup_slot(dev, pcidev_info, sn_irq_info);
> >  }
> >  
> > +EXPORT_SYMBOL(sn_io_slot_fixup);
> > +
> >  /*
> >   * sn_pci_controller_fixup() - This routine sets up a bus's resources
> >   *			       consistent with the Linux PCI abstraction layer.
> > @@ -272,9 +317,6 @@ sn_bus_fixup(struct pci_bus *bus)
> >  {
> >  	struct pci_dev *pci_dev = NULL;
> >  	struct pcibus_bussoft *prom_bussoft_ptr;
> > -	extern void sn_common_bus_fixup(struct pci_bus *,
> > -					struct pcibus_bussoft *);
> > -
> >  
> >  	if (!bus->parent) {  /* If root bus */
> >  		prom_bussoft_ptr = PCI_CONTROLLER(bus)->platform_data;
> > @@ -291,7 +333,7 @@ sn_bus_fixup(struct pci_bus *bus)
> >  					   prom_bussoft_ptr->bs_legacy_mem);
> >          }
> >          list_for_each_entry(pci_dev, &bus->devices, bus_list) {
> > -                sn_pci_fixup_slot(pci_dev);
> > +                sn_io_slot_fixup(pci_dev);
> >          }
> >  
> >  }
> > diff -puN arch/ia64/sn/pci/pcibr/pcibr_provider.c~altix-acpi-ssdt-pci-device-support arch/ia64/sn/pci/pcibr/pcibr_provider.c
> > --- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c~altix-acpi-ssdt-pci-device-support
> > +++ a/arch/ia64/sn/pci/pcibr/pcibr_provider.c
> > @@ -20,7 +20,8 @@
> >  #include "xtalk/hubdev.h"
> >  
> >  int
> > -sal_pcibr_slot_enable(struct pcibus_info *soft, int device, void *resp)
> > +sal_pcibr_slot_enable(struct pcibus_info *soft, int device, void *resp,
> > +                      char **ssdt)
> >  {
> >  	struct ia64_sal_retval ret_stuff;
> >  	u64 busnum;
> > @@ -32,7 +33,8 @@ sal_pcibr_slot_enable(struct pcibus_info
> >  	segment = soft->pbi_buscommon.bs_persist_segment;
> >  	busnum = soft->pbi_buscommon.bs_persist_busnum;
> >  	SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_SLOT_ENABLE, segment,
> > -			busnum, (u64) device, (u64) resp, 0, 0, 0);
> > +			busnum, (u64) device, (u64) resp, (u64)ia64_tpa(ssdt),
> > +			0, 0);
> >  
> >  	return (int)ret_stuff.v0;
> >  }
> > diff -puN include/asm-ia64/sn/acpi.h~altix-acpi-ssdt-pci-device-support include/asm-ia64/sn/acpi.h
> > --- a/include/asm-ia64/sn/acpi.h~altix-acpi-ssdt-pci-device-support
> > +++ a/include/asm-ia64/sn/acpi.h
> > @@ -9,8 +9,7 @@
> >  #ifndef _ASM_IA64_SN_ACPI_H
> >  #define _ASM_IA64_SN_ACPI_H
> >  
> > -#include "acpi/acglobal.h"
> > -
> > -#define SN_ACPI_BASE_SUPPORT()   (acpi_gbl_DSDT->oem_revision >= 0x20101)
> > +extern int sn_acpi_rev;
> > +#define SN_ACPI_BASE_SUPPORT()   (sn_acpi_rev >= 0x20101)
> >  
> >  #endif /* _ASM_IA64_SN_ACPI_H */
> > diff -puN include/asm-ia64/sn/pcibr_provider.h~altix-acpi-ssdt-pci-device-support include/asm-ia64/sn/pcibr_provider.h
> > --- a/include/asm-ia64/sn/pcibr_provider.h~altix-acpi-ssdt-pci-device-support
> > +++ a/include/asm-ia64/sn/pcibr_provider.h
> > @@ -142,7 +142,7 @@ extern int 		pcibr_ate_alloc(struct pcib
> >  extern void 		pcibr_ate_free(struct pcibus_info *, int);
> >  extern void 		ate_write(struct pcibus_info *, int, int, u64);
> >  extern int sal_pcibr_slot_enable(struct pcibus_info *soft, int device,
> > -				 void *resp);
> > +				 void *resp, char **ssdt);
> >  extern int sal_pcibr_slot_disable(struct pcibus_info *soft, int device,
> >  				  int action, void *resp);
> >  extern u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus);
> > diff -puN include/asm-ia64/sn/pcidev.h~altix-acpi-ssdt-pci-device-support include/asm-ia64/sn/pcidev.h
> > --- a/include/asm-ia64/sn/pcidev.h~altix-acpi-ssdt-pci-device-support
> > +++ a/include/asm-ia64/sn/pcidev.h
> > @@ -70,10 +70,16 @@ extern void sn_irq_fixup(struct pci_dev 
> >  			 struct sn_irq_info *sn_irq_info);
> >  extern void sn_irq_unfixup(struct pci_dev *pci_dev);
> >  extern struct pcidev_info * sn_pcidev_info_get(struct pci_dev *);
> > +extern void sn_bus_fixup(struct pci_bus *);
> > +extern void sn_acpi_bus_fixup(struct pci_bus *);
> > +extern void sn_common_bus_fixup(struct pci_bus *, struct pcibus_bussoft *);
> >  extern void sn_bus_store_sysdata(struct pci_dev *dev);
> >  extern void sn_bus_free_sysdata(void);
> >  extern void sn_generate_path(struct pci_bus *pci_bus, char *address);
> > -extern void sn_pci_fixup_slot(struct pci_dev *dev);
> > +extern void sn_io_slot_fixup(struct pci_dev *);
> > +extern void sn_acpi_slot_fixup(struct pci_dev *);
> > +extern void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *,
> > +			      struct sn_irq_info *);
> >  extern void sn_pci_unfixup_slot(struct pci_dev *dev);
> >  extern void sn_irq_lh_init(void);
> >  #endif				/* _ASM_IA64_SN_PCI_PCIDEV_H */
> > _
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > 
> 

-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux