Scetbon Cyril wrote:
Hi people,
My processor is a sempron 3100+ :
cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 44
model name : Mobile AMD Sempron(tm) 3100+
stepping : 2
cpu MHz : 800.000
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt
3dnowext 3dnow pni lahf_lm ts fid vid ttp tm stc
bogomips : 1598.67
I'm using powernow-k8 module to scale my processor on userspace demand.
The frequence of my CPU is 1800MHz but it can't be scaled at more than
1600MHz :
cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
1800000
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
1600000
Sometimes the value above is set to 1800000 but I don't know why it's
not always set to cpuinfo_max_freq.
dmesg|grep -i acpi :
ACPI: Core revision 20060623
ACPI: setting ELCR to 0200 (from 0e20)
ACPI: bus type pci registered
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [C047] (0000:00)
ACPI: Assume root bridge [\_SB_.C047] bus is 0
ACPI: PCI Interrupt Routing Table [\_SB_.C047._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C047.C048._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C047.C0AB._PRT]
ACPI: Power Resource [C1CF] (off)
ACPI: Embedded Controller [C111] (gpe 17) interrupt mode.
ACPI: Power Resource [C1B7] (on)
ACPI: Power Resource [C1C7] (on)
ACPI: PCI Interrupt Link [C0F0] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0F1] (IRQs 10 11) *5
ACPI: PCI Interrupt Link [C0F2] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C0F3] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0F4] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C0F5] (IRQs *9)
ACPI: PCI Interrupt Link [C0F6] (IRQs 10 11) *5
ACPI: PCI Interrupt Link [C0F7] (IRQs *10 11)
ACPI: Power Resource [C26C] (off)
ACPI: Power Resource [C26D] (off)
ACPI: Power Resource [C26E] (off)
ACPI: Power Resource [C26F] (off)
PCI: Using ACPI for IRQ routing
Device `[C1C9]' is not power manageableACPI: PCI Interrupt Link [C0F4]
enabled a t IRQ 11
ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0F4] -> GSI 11 (level,
low) -> IRQ 11
ACPI: PCI Interrupt Link [C0F1] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [C0F1] -> GSI 10 (level,
low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:14.6 disabled
Device `[C1CE]' is not power manageableACPI: PCI Interrupt Link [C0F7]
enabled a t IRQ 10
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [C0F7] -> GSI 10 (level,
low) -> IRQ 10
ACPI: (supports S0 S3 S4 S5)
ACPI: Transitioning device [C270] to D3
ACPI: Transitioning device [C270] to D3
ACPI: Fan [C270] (off)
ACPI: Transitioning device [C271] to D3
ACPI: Transitioning device [C271] to D3
ACPI: Fan [C271] (off)
ACPI: Transitioning device [C272] to D3
ACPI: Transitioning device [C272] to D3
ACPI: Fan [C272] (off)
ACPI: Transitioning device [C273] to D3
ACPI: Transitioning device [C273] to D3
ACPI: Fan [C273] (off)
ACPI: CPU0 (power states: C1[C1] C3[C3])
ACPI: Processor [C000] (supports 8 throttling states)
ACPI: Thermal Zone [TZ1] (27 C)
ACPI: Thermal Zone [TZ2] (23 C)
ACPI: Thermal Zone [TZ3] (23 C)
ACPI: PCI Interrupt Link [C0F0] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [C0F0] -> GSI 10 (level,
low) -> IRQ 10
Time: acpi_pm clocksource has been installed.
ACPI: PCI Interrupt Link [C0F3] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [C0F3] -> GSI 10 (level,
low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [C0F3] -> GSI 10 (level,
low) -> IRQ 10
Device `[C0E8]' is not power manageable<6>ACPI: PCI Interrupt
0000:00:13.2[A] -> Link [C0F3] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [C0F5] enabled at IRQ 9
ACPI: PCI Interrupt 0000:02:04.2[C] -> Link [C0F5] -> GSI 9 (level, low)
-> IRQ 9
ACPI: PCI Interrupt Link [C0F6] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [C0F6] -> GSI 11 (level,
low) -> IRQ 11
ACPI: PCI Interrupt 0000:02:04.4[C] -> Link [C0F5] -> GSI 9 (level, low)
-> IRQ 9
ACPI: PCI Interrupt 0000:00:14.5[B] -> Link [C0F1] -> GSI 10 (level,
low) -> IRQ 10
ACPI: Battery Slot [C179] (battery present)
ACPI: Battery Slot [C178] (battery absent)
ACPI: AC Adapter [C177] (off-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C1F0]
ACPI: Lid Switch [C1F1]
ACPI: Video Device [C049] (multi-head: yes rom: no post: no)
Any suggestion ?
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
anyone ?
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
