From: Marek W <marekw1977@xxxxxxxxxxxx>
Add support for W3000 (W3V) and indirectly fixes an issue with kmilo under
KDE (it was triggering excessive LCD read error messages by querying
asus_acpi module) allowing people (I am probably the only one who tested
this) with W3000 to run kmilo.
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
drivers/acpi/asus_acpi.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff -puN drivers/acpi/asus_acpi.c~asus_acpi-w3000-support drivers/acpi/asus_acpi.c
--- devel/drivers/acpi/asus_acpi.c~asus_acpi-w3000-support 2006-06-01 20:17:07.000000000 -0700
+++ devel-akpm/drivers/acpi/asus_acpi.c 2006-06-01 20:17:07.000000000 -0700
@@ -131,6 +131,7 @@ struct asus_hotk {
P30, //Samsung P30
S1x, //S1300A, but also L1400B and M2400A (L84F)
S2x, //S200 (J1 reported), Victor MP-XP7210
+ W3V, //W3030V
xxN, //M2400N, M3700N, M5200N, S1300N, S5200N, W1OOON
//(Centrino)
END_MODEL
@@ -345,6 +346,17 @@ static struct model_data model_conf[END_
.brightness_down = S2x_PREFIX "_Q0A"},
{
+ .name = "W3V",
+ .mt_mled = "MLED",
+ .mt_wled = "WLED",
+ .mt_lcd_switch = xxN_PREFIX "_Q10",
+ .lcd_status = "\\BKLT",
+ .brightness_set = "SPLV",
+ .brightness_get = "GPLV",
+ .display_set = "SDSP",
+ .display_get = "\\INFB"},
+
+ {
.name = "xxN",
.mt_mled = "MLED",
/* WLED present, but not controlled by ACPI */
@@ -1066,6 +1078,8 @@ static int asus_hotk_get_info(void)
hotk->model = S2x;
else if (strncmp(model->string.pointer, "L5", 2) == 0)
hotk->model = L5x;
+ else if (strncmp(model->string.pointer, "W3V", 3) == 0)
+ hotk->model = W3V;
if (hotk->model == END_MODEL) {
printk("unsupported, trying default values, supply the "
@@ -1087,9 +1101,10 @@ static int asus_hotk_get_info(void)
hotk->methods->mt_mled = NULL;
/* S5N and M5N have no MLED */
else if (strncmp(model->string.pointer, "M2N", 3) == 0 ||
- strncmp(model->string.pointer, "W1N", 3) == 0)
+ strncmp(model->string.pointer, "W1N", 3) == 0 ||
+ strncmp(model->string.pointer, "W3V", 3) == 0)
hotk->methods->mt_wled = "WLED";
- /* M2N and W1N have a usable WLED */
+ /* M2N, W1N and W3V have a usable WLED */
else if (asus_info) {
if (strncmp(asus_info->oem_table_id, "L1", 2) == 0)
hotk->methods->mled_status = NULL;
_
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
