Andrew,
Success :)
I've attached the patches used vs 2.6.17-rc4 (stock) and 2.6.17-rc6-mm2
(as the VIA include lists were different). I simply made the change
manually, based on your and others' inputs (it seemed the simpler option).
Both kernels now boot, and all USB devices are recognised correctly.
Sergio, you can find attached lspci -n output as requested, and indeed,
I run in XT_PIC mode for interrupts.
I did NOT run the setpci command as requested by Sergey, let me know if
that helps anyone considering the fix sorted this out.
Where to from here I'll leave with you guys, an entry in the quirks.c
file certainly is warranted for my motherboard...
I'm happy to test further patches if required on this, for now I'm on
rc6-mm2 with my attached patch to have both ACX111 networking and USB
working good :)
Cheers!
:)Johny
Andrew Morton wrote:
On Tue, 20 Jun 2006 21:21:35 +1000
Johny <kernel@xxxxxxxxxxx> wrote:
Firstly, apologies for a) the massive x-post and b) the time taken to
get back to people... Please let me know where this is most
appropriately dealt with and I'll keep it off other lists, considering
the latest information;
Andrew - please note - this is not a problem exclusive to the -mm
series, on testing various combos I found it in the stock series too.
Thanks for persisting with this.
Stock kernels break for me starting with 2.6.17-rc4 (I tested all rcs
and also .17 itself), rc3 works a treat for using USB. I suspect the
following line missing in dmesg for rc4 is the reason;
-PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 11
yes, that looks suspicious.
See the following dmesg files for details;
http://www.agotnes.com/kernelStuff/dmesg-2.6.17-rc3-working
http://www.agotnes.com/kernelStuff/dmesg-2.6.17-rc4-not-working
And the diff, for convenience;
http://www.agotnes.com/kernelStuff/diff-rc3_rc4
I have a Via chipset motherboard (for my sins), further details
available on request, again, for convenience, the lspci;
http://www.agotnes.com/kernelStuff/lspci
A couple of possible suspect patches introduced in the changelog for rc4
were (with the first one looking particularly interesting, the others
less interesting as I go down the list);
[PATCH] PCI quirk: VIA IRQ fixup should only run for VIA southbridges
This one, I'd expect.
[PATCH] x86_64: avoid IRQ0 ioapic pin collision
[PATCH] PCI: fix via irq SATA patch
[ALSA] via82xx - Use DXS_SRC as default for VIA8235/8237/8251 chips
[ALSA] via82xx: tweak VT8251 workaround
[ALSA] via82xx: add support for VIA VT8251 (AC'97)
You could try a `patch -R' of the below.
commit 75cf7456dd87335f574dcd53c4ae616a2ad71a11
Author: Chris Wedgwood <cw@xxxxxxxx>
Date: Tue Apr 18 23:57:09 2006 -0700
[PATCH] PCI quirk: VIA IRQ fixup should only run for VIA southbridges
Alan Cox pointed out that the VIA 'IRQ fixup' was erroneously running
on my system which has no VIA southbridge (but I do have a VIA IEEE
1394 device).
This should address that. I also changed "Via IRQ" to "VIA IRQ"
(initially I read Via as a capitalized via (by way/means of).
Signed-off-by: Chris Wedgwood <cw@xxxxxxxx>
Acked-by: Jeff Garzik <jeff@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index c42ae2c..19e2b17 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -642,13 +642,15 @@ static void quirk_via_irq(struct pci_dev
new_irq = dev->irq & 0xf;
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
if (new_irq != irq) {
- printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
+ printk(KERN_INFO "PCI: VIA IRQ fixup for %s, from %d to %d\n",
pci_name(dev), irq, new_irq);
udelay(15); /* unknown if delay really needed */
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
}
}
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irq);
/*
* VIA VT82C598 has its device ID settable and many BIOSes
If you have trouble getting it to apply, just manually replace all the
DECLARE_PCI_FIXUP_ENABLE lines at the end of quirk_via_irq() with the
single line
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
--- usb/drivers/pci/quirks.c 2006-06-21 20:18:56.000000000 +1000
+++ linux-2.6.17-rc4/drivers/pci/quirks.c 2006-06-21 20:13:15.000000000 +1000
@@ -648,9 +648,7 @@
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
}
}
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
/*
* VIA VT82C598 has its device ID settable and many BIOSes
--- usb/drivers/pci/quirks.c 2006-06-21 20:25:41.000000000 +1000
+++ linux-2.6.17-rc6-mm2/drivers/pci/quirks.c 2006-06-21 20:25:08.000000000 +1000
@@ -662,13 +662,7 @@
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
}
}
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
/*
* VIA VT82C598 has its device ID settable and many BIOSes
00:00.0 0600: 1106:3205
00:01.0 0604: 1106:b198
00:08.0 0280: 104c:9066
00:10.0 0c03: 1106:3038 (rev 80)
00:10.1 0c03: 1106:3038 (rev 80)
00:10.2 0c03: 1106:3038 (rev 80)
00:10.3 0c03: 1106:3104 (rev 82)
00:11.0 0601: 1106:3177
00:11.1 0101: 1106:0571 (rev 06)
00:11.5 0401: 1106:3059 (rev 50)
00:12.0 0200: 1106:3065 (rev 74)
01:00.0 0300: 1106:7205 (rev 01)
