Some VIA southbridges contain a flag in the ACPI register space that
indicates whether an abnormal poweroff has occured, presumably with the
intention that it can be cleared on clean shutdown. Some BIOSes check
this flag at resume time, and will re-POST the system rather than jump
back to the OS if it's set. Clearing it at boot time appears to be
sufficient. I'm not sure if drivers/pci/quirks.c is the right place to
do it, but I'm not sure where would be cleaner.
Signed-off-by: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 7537260..2f9f996 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -660,6 +660,33 @@ static void __devinit quirk_vt82c598_id(
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id );
+#ifdef CONFIG_ACPI
+
+/* Some VIA systems boot with the abnormal status flag set. This can cause
+ * the BIOS to re-POST the system on resume rather than passing control
+ * back to the OS. Clear the flag on boot
+ */
+
+static void __devinit quirk_via_abnormal_poweroff(struct pci_dev *dev)
+{
+ u32 register;
+
+ acpi_hw_register_read (ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS,
+ ®ister);
+
+ if (register & 0x800) {
+ printk ("Clearing abnormal poweroff flag\n");
+ acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK,
+ ACPI_REGISTER_PM1_STATUS,
+ (u16)0x800);
+ }
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_abnormal_poweroff);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_abnormal_poweroff);
+
+#endif
+
/*
* CardBus controllers have a legacy base address that enables them
* to respond as i82365 pcmcia controllers. We don't want them to
--
Matthew Garrett | mjg59@xxxxxxxxxxxxx
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
