Hello, I hope the list can help me to solve this problem: I have the F1 key of my laptop labeled "Ruhezustand" (hibernate in english) - on Windows I can use Fn + F1 zu suspend (RAM or Disk as I like it). On linux this doens't work cause the Dell BIOS doesn't describe the Fn + F1 as a ACPI hotkey and doens't create an ACPI event. My question is how can I "workaround" this problem, e.g. create a ACPI event for this buttons (kernel patch?) or make acpid work with a normal keycode rather than an ACPI event? I can not work on the kernel code myself cause I am not skilled in C language :-( A solution would make quite some Dell Inspiron 6000 happy - I am in the proccess of writing a HowTo for this laptop but this problem is still not sorted out. Thanks in advance! Sebastian dmesg |grep -i acpi tbxface-0109 [02] load_tables : ACPI Tables successfully acquired ACPI Namespace successfully loaded at root b042fc70 evxfevnt-0091 [03] enable : Transition to ACPI mode successful ACPI: bus type pci registered ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PCI: Using ACPI for IRQ routing acpi_bus-0201 [01] bus_set_power : Device is not power manageable ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 16 ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PBTN] ACPI: Sleep Button (CM) [SBTN] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) acpi_processor-0495 [14] processor_get_info : Error getting cpuindex for acpiid 0x1 ACPI: Thermal Zone [THM] (32 C) acpi_bus-0201 [09] bus_set_power : Device is not power manageable ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI interrupt for device 0000:00:1f.2 disabled ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 acpi_bus-0201 [09] bus_set_power : Device is not power manageable ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 16 ACPI wakeup devices: ACPI: (supports S0 S3 S4 S5) ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 17 (level, low) -> IRQ 17 acpi_bus-0201 [09] bus_set_power : Device is not power manageable ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 18 acpi_bus-0201 [09] bus_set_power : Device is not power manageable ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 18 dmesg output when Fn + F1 pressed: atkbd.c: Unknown key pressed (translated set 2, code 0x8a on isa0060/serio0). atkbd.c: Use 'setkeycodes e00a <keycode>' to make it known. - To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
