Hi , Well I had test latest (at May 14), and don't change much the behavior of my desktop. Anyway though might be useful send the diff of dmesg I have new messages like: ACPI (acpi_bus-0191): Device is not power manageable [20060310] ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] Thanks, -- Sérgio M. B.
--- dmesg11 2006-05-14 03:29:42.000000000 +0100 +++ dmesg13 2006-05-14 07:18:21.000000000 +0100 @@ -1,5 +1,5 @@ Bootdata ok (command line is ro root=LABEL=/1 report_lost_ticks notsc) -Linux version 2.6.16-1.2202_FC6.root (root@monteirov) (gcc version 4.1.0 20060304 (Red Hat 4.1.0-3)) #1 SMP Sat May 13 21:27:24 WEST 2006 +Linux version 2.6.16-1.2203_FC5.root (root@monteirov) (gcc version 4.1.0 20060304 (Red Hat 4.1.0-3)) #1 SMP Sun May 14 06:24:33 WEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) @@ -21,8 +21,8 @@ No NUMA configuration found Faking a node at 0000000000000000-000000003ffb0000 Bootmem setup node 0 0000000000000000-000000003ffb0000 -On node 0 totalpages: 256348 - DMA zone: 2410 pages, LIFO batch:0 +On node 0 totalpages: 256346 + DMA zone: 2408 pages, LIFO batch:0 DMA32 zone: 253938 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 @@ -52,13 +52,13 @@ PID hash table entries: 4096 (order: 12, 32768 bytes) Disabling vsyscall due to use of PM timer time.c: Using 3.579545 MHz WALL PM GTOD PM timer. -time.c: Detected 2793.052 MHz processor. +time.c: Detected 2793.172 MHz processor. Console: colour VGA+ 80x25 -time.c: Lost 782 timer tick(s)! rip start_kernel+0x11a/0x1fb) +time.c: Lost 298 timer tick(s)! rip start_kernel+0x11a/0x1fb) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) -Memory: 1022456k/1048256k available (2322k kernel code, 25412k reserved, 1675k data, 200k init) -Calibrating delay using timer specific routine.. 5594.11 BogoMIPS (lpj=11188232) +Memory: 1022448k/1048256k available (2326k kernel code, 25420k reserved, 1680k data, 200k init) +Calibrating delay using timer specific routine.. 5594.13 BogoMIPS (lpj=11188274) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode @@ -72,12 +72,12 @@ CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) Using local APIC timer interrupts. -result 12468928 -Detected 12.468 MHz APIC timer. +result 12469459 +Detected 12.469 MHz APIC timer. time.c: Lost 9 timer tick(s)! rip setup_boot_APIC_clock+0x11f/0x121) Booting processor 1/2 APIC 0x1 Initializing CPU#1 -Calibrating delay using timer specific routine.. 5586.52 BogoMIPS (lpj=11173046) +Calibrating delay using timer specific routine.. 5586.47 BogoMIPS (lpj=11172954) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 @@ -94,7 +94,7 @@ PCI: BIOS Bug: MCFG area is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 -ACPI: Subsystem revision 20060127 +ACPI: Subsystem revision 20060310 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) @@ -128,7 +128,9 @@ IO window: disabled. MEM window: f3e00000-f7efffff PREFETCH window: bff00000-dfefffff +ACPI (acpi_bus-0191): Device is not power manageable [20060310] PCI: Setting latency timer of device 0000:00:01.0 to 64 +ACPI (acpi_bus-0191): Device is not power manageable [20060310] GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:02.0 to 64 @@ -140,7 +142,7 @@ TCP reno registered IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) -audit(1147565990.724:1): initialized +audit(1147590942.700:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) @@ -148,7 +150,7 @@ Initializing Cryptographic API ksign: Installing public key data Loading keyring -- Added public key 3B934C32D60116F +- Added public key 1BAC065461AA22EC - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered @@ -161,6 +163,10 @@ Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 +ACPI Exception (acpi_processor-0668): AE_NOT_FOUND, Processor Device is not present [20060310] +ACPI Error (acpi_processor-0474): Getting cpuindex for acpiid 0x3 [20060310] +ACPI Exception (acpi_processor-0668): AE_NOT_FOUND, Processor Device is not present [20060310] +ACPI Error (acpi_processor-0474): Getting cpuindex for acpiid 0x4 [20060310] Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones @@ -172,6 +178,7 @@ Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 +ACPI (acpi_bus-0191): Device is not power manageable [20060310] GSI 17 sharing vector 0xC1 and IRQ 17 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 193 VP_IDE: chipset revision 6 @@ -199,14 +206,11 @@ Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 -ACPI wakeup devices: -PCI0 PS2K PS2M UAR1 MC97 USB1 USB2 USB3 USB4 EHCI ILAN ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 200k freed -Write protecting the kernel read-only data: 898k +Write protecting the kernel read-only data: 902k input: AT Translated Set 2 keyboard as /class/input/input0 SCSI subsystem initialized -time.c: Lost 1 timer tick(s)! rip __do_softirq+0x4a/0xd2) libata version 1.20 loaded. sata_via 0000:00:0f.0: version 1.1 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 193 @@ -237,65 +241,72 @@ EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks -audit(1147565995.096:2): selinux=0 auid=4294967295 +audit(1147590947.196:2): selinux=0 auid=4294967295 +via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker +ACPI (acpi_bus-0191): Device is not power manageable [20060310] +GSI 18 sharing vector 0xC9 and IRQ 18 +ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 201 +eth0: VIA Rhine II at 0xf7fffc00, 00:13:8f:6e:8f:c5, IRQ 201. +eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 -sd 0:0:0:0: Attached scsi generic sg0 type 0 -GSI 18 sharing vector 0xC9 and IRQ 18 -ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 201 +ACPI (acpi_bus-0191): Device is not power manageable [20060310] +GSI 19 sharing vector 0xD1 and IRQ 19 +ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 209 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 -ehci_hcd 0000:00:10.4: irq 201, io mem 0xf7fff800 +ehci_hcd 0000:00:10.4: irq 209, io mem 0xf7fff800 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected -Floppy drive(s): fd0 is 1.44M -FDC 0 is a post-1991 82077 -via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker -GSI 19 sharing vector 0xD1 and IRQ 19 -ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 209 -eth0: VIA Rhine II at 0xf7fffc00, 00:13:8f:6e:8f:c5, IRQ 209. -eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. +sd 0:0:0:0: Attached scsi generic sg0 type 0 USB Universal Host Controller Interface driver v3.0 -ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 201 +Floppy drive(s): fd0 is 1.44M +ACPI (acpi_bus-0191): Device is not power manageable [20060310] +ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 209 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 -uhci_hcd 0000:00:10.0: irq 201, io base 0x0000dc00 +uhci_hcd 0000:00:10.0: irq 209, io base 0x0000dc00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected -ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 201 +FDC 0 is a post-1991 82077 +ACPI (acpi_bus-0191): Device is not power manageable [20060310] +ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 209 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 -uhci_hcd 0000:00:10.1: irq 201, io base 0x0000d080 +uhci_hcd 0000:00:10.1: irq 209, io base 0x0000d080 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected -ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 201 +ACPI (acpi_bus-0191): Device is not power manageable [20060310] +ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 209 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 -uhci_hcd 0000:00:10.2: irq 201, io base 0x0000d000 +uhci_hcd 0000:00:10.2: irq 209, io base 0x0000d000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected -ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 201 +ACPI (acpi_bus-0191): Device is not power manageable [20060310] +ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 209 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 -uhci_hcd 0000:00:10.3: irq 201, io base 0x0000ef00 +uhci_hcd 0000:00:10.3: irq 209, io base 0x0000ef00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 1-6: new high speed USB device using ehci_hcd and address 3 usb 1-6: configuration #1 chosen from 1 choice usb 2-2: new full speed USB device using uhci_hcd and address 2 -Initializing USB Mass Storage driver... usb 2-2: configuration #1 chosen from 1 choice +Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. +ACPI (acpi_bus-0191): Device is not power manageable [20060310] GSI 20 sharing vector 0xD9 and IRQ 20 ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:11.5 to 64 @@ -305,6 +316,64 @@ parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] lp0: using parport0 (interrupt-driven). lp0: console ready +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] +ACPI Exception (acpi_memory-0403): AE_ERROR, handle is no memory device [20060310] ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found
Attachment:
smime.p7s
Description: S/MIME cryptographic signature
