RE: [(repost) git Patch 1/1] avoid IRQ0 ioapic pin collision

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>> >I have tested this algorithm and it worked just fine for me... I 
> >> >used the following compression code in mp_register_gsi():
> >> >
> >> >
> >> >int     irqs_used = 0;
> >> >int     gsi_to_irq[NR_IRQS] = { [0 ... NR_IRQS-1] = -1 };
> >> >...
> >> >
> >> >        if (triggering == ACPI_LEVEL_SENSITIVE) {
> >> >                if (gsi > NR_IRQS) {
> >> >                        int i;
> >> >                        printk("NBP: looking for unused IRQ\n");
> >> >                        for (i = nr_ioapic_registers[0]; i 
> >< NR_IRQS;
> >> i++) {
> >> >                                if (gsi_to_irq[i] == -1) {
> >> >                                        gsi_to_irq[i] = gsi;
> >> >                                        gsi = i;
> >> >                                        break;
> >> >                                }
> >> >                        }
> >> >                        if (i >= NR_IRQS) {
> >> >                                printk(KERN_ERR "GSI %u is 
> >> too high\n",
> >> ...
> >> >                                return gsi;
> >> >                        }
> >> >                } else
> >> >                        gsi_to_irq[gsi] = gsi;
> >> >        }
> >> 
> >> the problem with this code as it stands is that 
> >> acpi/mp_register_gsi() can be called with gsi in any order.  
> >> So it is possible for the compression code above to select 
> >> gsi_to_irq[n] and later for the non-compression path to 
> >> over-write gsi_to_irq[n].
> >> 
> >
> >It should always find the entry it's done the first one around 
> >actually, the first thing in mp_register_gsi() will check for it I
> think.
> 
> No, the top of mp_register_gsi() is based on the real GSI
> (before re-numbering) and the real IOAPIC pin number.
> It prevents re-programming the real IOAPIC pin (a dubious 
> optimization,
> IMHO).
> Yes, if it finds a 2nd call results in the same pin, it returns
> gsi_to_irq[i],
> but that isn't the failure case here.
> 
> a failure case is like so:
> say the 1st IOAPIC has 24 pins, so the 0th RTE of the 2nd APIC is #24,
> and this happens:
> 
> mp_register_gsi(NR_IRQS+1);
> 	gsi_to_irq[24] is free, so it will get claimed
> 	by the IRQ that wants to talk to GSI NR_IRQS+1
> 
> mp_register_gsi(24);
> 	gsi_to_irq[24] was not -1 here, it was NR_IRQS+1,
> 	but that will get over-written to be 24.
> 
> So now you have multiple independent interrupt sources that think
> they own IRQ 24.

But if the first one was say 280, then gsi_to_irq[24]=280. The other one
will be looking for gsi_to_irq[XX]=24. That should make differentiation
I hope. Don't you think? I will go through this some more...

--Natalie
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux