On Tuesday 18 April 2006 00:53, Yu, Ling L wrote:
> Could you use root to run again and send me the screen output again?
Well, I decided to try to capture some information on this failure. So
I shut down all my applications and tried again as root. This time
there was no hang -- the tests ran to completion. I did run an update
from Fedora update repositories before trying again. This installed
several updates to GNOME. Probably not related, but who knows?
<shrug>
Anyway, here's the output of the abat tests.
I now note that the tests apparently left my machine in a throttled
state. Everything was running slower than usual. Instead of
investigating that, I simply shut down and rebooted since I had to get
off to work. If you would like additional information about this, I
can try again tonight.
--
Garry T. Williams --- +1 678 656-4579
ACPI ABAT started...
Fedora Core release 5 (Bordeaux)
Kernel \r on an \m
Linux tfr 2.6.16-1.2080_FC5 #1 Tue Mar 28 03:38:34 EST 2006 i686 i686
i386 GNU/Linux
*******************************************************
* Test ACPI file system interfaces *
*******************************************************
-------------------------------------------------------
ACPI is supported.
-------------------------------------------------------
version: 20060127
-------------------------------------------------------
alarm 2006-04-00 00:00:00
event OK
dsdt OK
fadt OK
sleep mem(S3) disk(S4)
wakeup Not set
-------------------------------------------------------
Driver State Device Item Information
------ ----- ------ ---- -----------
ac loaded NO
battery loaded NO
button loaded lid/LID0 info type: Lid Switch
state state: open
power/PWRB info type: Power Button
(CM)
power/PWRF info type: Power Button
(FF)
ec build-in NO
fan build-in NO
power build-in NO
processor build-in NO
thermal build-in NO
video loaded GFX0 DOS DOS setting: <1>
POST <not supported>
POST_info <not supported>
ROM <TODO>
info Switching heads: yes
Video ROM: yes
Device to be POSTed
on boot:
no
GFX0/CRT EDID <not supported>
brightness <not supported>
info device_id: 0x0100
type: CRT
known by bios: no
state state: 0x1d
query: 0x00
GFX0/DVI EDID <not supported>
brightness <not supported>
info device_id: 0x0320
type: UNKNOWN
known by bios: no
state state: 0x1d
query: 0x00
GFX0/LCD EDID <not supported>
brightness <not supported>
info device_id: 0x0410
type: UNKNOWN
known by bios: no
state state: 0x1f
query: 0x00
GFX0/TV EDID <not supported>
brightness <not supported>
info device_id: 0x0240
type: UNKNOWN
known by bios: no
state state: 0x1d
query: 0x00
NGFX DOS DOS setting: <1>
POST <not supported>
POST_info <not supported>
ROM <TODO>
info Switching heads: yes
Video ROM: no
Device to be POSTed
on boot:
no
NGFX/CRT EDID <not supported>
brightness <not supported>
info device_id: 0x0100
type: CRT
known by bios: no
state state: 0x0d
query: 0x00
NGFX/DVI EDID <not supported>
brightness <not supported>
info device_id: 0x0111
type: UNKNOWN
known by bios: no
state state: 0x0d
query: 0x00
NGFX/LCD EDID <not supported>
brightness <not supported>
info device_id: 0x0118
type: UNKNOWN
known by bios: no
state state: 0x0f
query: 0x00
NGFX/TV EDID <not supported>
brightness <not supported>
info device_id: 0x0200
type: TVOUT
known by bios: no
state state: 0x0d
query: 0x00
-------------------------------------------------------
-------------
Test Summary:
-------------
TOTAL: 17
PASS: 17
FAIL: 0
NOTSUPPORT: 0
UNRESOLVED: 0
UNTESTED: 0
-------------
*******************************************************
* Test ACPI drivers *
*******************************************************
-------------------------------------------------------
Driver State Action Results
ac loaded verifying PASS
unloading PASS
verifying PASS
loading PASS
verifying PASS
battery loaded verifying PASS
unloading PASS
verifying PASS
loading PASS
verifying PASS
button loaded verifying PASS
unloading PASS
verifying PASS
loading PASS
verifying PASS
ec build-in verifying PASS
fan build-in verifying PASS
power build-in verifying PASS
processor build-in verifying PASS
thermal build-in verifying PASS
video loaded verifying PASS
unloading PASS
verifying PASS
loading PASS
verifying PASS
container notsupport
memhotplug notsupport
numa notsupport
-------------------------------------------------------
-------------
Test Summary:
-------------
TOTAL: 12
PASS: 9
FAIL: 0
NOTSUPPORT: 3
UNRESOLVED: 0
UNTESTED: 0
-------------
*******************************************************
* Test ACPI P-state *
*******************************************************
Native Geyserville III Support (P state) - Demand Based Switching
###############################################################################
GV3/DBS validation for I386 and EM64T
Geyserville III is an efficient mechanism for switching
to/from low
voltage mode - Enhanced SpeedStep Technology. Dependent upon
ACPI.
-------------------------------------------------------------------------------
Fedora Core release 5 (Bordeaux)
Kernel \r on an \m
Linux tfr 2.6.16-1.2080_FC5 #1 Tue Mar 28 03:38:34 EST 2006 i686 i686
i386 GNU/Linux
-------------------------------------------------------------------------------
Start setup
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca
cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx est tm2
modprobe cpufreq_powersave
modprobe cpufreq_ondemand
The service cpuspeed should be stopped before running tests
Stopping cpuspeed: [ OK ]
../tmp/system_update_info:
modprobe -r cpufreq_powersave
modprobe -r cpufreq_ondemand
/etc/init.d/cpuspeed restart
Finish setup
Execution of test_1_1
get_governors output:
ondemand powersave userspace performance
num CPU = 0
READ_GOVERNOR performance
MAX_FREQ 1600000
READ_FREQ 1600000
Test p_states_test_1_1 PASSED
Execution of test_2_1
get_governors output:
ondemand powersave userspace performance
num CPU = 0
READ_GOVERNOR powersave
MIN_FREQ 800000
READ_FREQ 800000
Test p_states_test_2_1 PASSED
Execution of test_3_1
get_governors output:
ondemand powersave userspace performance
num CPU = 0
READ_GOVERNOR userspace
Test p_states_test_3_1 PASSED
Execution of test_3_2
get_governors output:
ondemand powersave userspace performance
num CPU = 0
READ_GOVERNOR userspace
AVLBL_FREQS 1600000 1333000 1067000 800000
READ_FREQ 1600000
READ_FREQ 1333000
READ_FREQ 1067000
READ_FREQ 800000
Test p_states_test_3_2 PASSED
Execution of test_4_1
get_governors output:
ondemand powersave userspace performance
num CPU = 0
READ_GOVERNOR ondemand
Test p_states_test_4_1 PASSED
Execution of test_4_2
get_governors output:
ondemand powersave userspace performance
num CPU = 0
READ_GOVERNOR ondemand
MIN_FREQ 800000
READ_FREQ 800000
Test p_states_test_4_2 PASSED
Execution of test_4_3
get_governors output:
ondemand powersave userspace performance
num CPU = 0
READ_GOVERNOR ondemand
MAX_FREQ 1600000
READ_FREQ 1600000
Test p_states_test_4_3 PASSED
Execution of test_4_4
get_governors output:
ondemand powersave userspace performance
TMP_FILE_PID:
27788
num CPU = 0
READ_GOVERNOR ondemand
MAX_FREQ 1600000
MIN_FREQ 800000
READ_FREQ 1600000
Test _test_4_4 PASSED
Start cleanup
modprobe -r cpufreq_powersave
modprobe -r cpufreq_ondemand
FATAL: Module cpufreq_ondemand is in use.
modprobe -r cpufreq_ondemand: return code 1
Do attempt to change governor
module to be removed ondemand
available governors - ondemand userspace performance
set_governor userspace
modprobe -r cpufreq_ondemand
OK
/etc/init.d/cpuspeed restart
Starting cpuspeed: [ OK ]
Finish cleanup
Native Geyserville III Support (P state) - Demand Based Switching
###############################################################################
GV3/DBS validation for I386 and EM64T
Geyserville III is an efficient mechanism for switching
to/from low
voltage mode - Enhanced SpeedStep Technology. Dependent upon
ACPI.
-------------------------------------------------------------------------------
Fedora Core release 5 (Bordeaux)
Kernel \r on an \m
Linux tfr 2.6.16-1.2080_FC5 #1 Tue Mar 28 03:38:34 EST 2006 i686 i686
i386 GNU/Linux
-------------------------------------------------------------------------------
Details:
--------
p_states_test_1_1 PASSED
p_states_test_2_1 PASSED
p_states_test_3_1 PASSED
p_states_test_3_2 PASSED
p_states_test_4_1 PASSED
p_states_test_4_2 PASSED
p_states_test_4_3 PASSED
p_states_test_4_4 PASSED
Test Summary:
-------------
TOTAL: 8
PASS: 8
FAIL: 0
NOTSUPPORT: 0
UNRESOLVED: 0
UNTESTED: 0
###########################################################
Test report is in
/home/garry/tmp/acpi-test-0.1/ABAT/p_states/log/results/test_report,
log file in /home/garry/tmp/acpi-test-0.1/ABAT/p_states/log/stdout
*******************************************************
* Test ACPI C-states *
*******************************************************
Start to test ...
Test 1 ...
CONFIG_ACPI=y
CONFIG_ACPI_PROCESSOR=y
test C-state support on CPU0 ............
CPU0 supports C2
max_cstate=C8
Test2 ...
test C-state switch on CPU0 ............
Current State: C2, Usage: 00319872
CPU0 supports C2
Current State: C2, Usage: 00320170
test CPU0: PASS
------------
Test Summary:
-------------
TOTAL: 2
PASS: 2
FAIL: 0
NOTSUPPORT: 0
UNRESOLVED: 0
UNTESTED: 0
-------------
*******************************************************
* Test ACPI T-states *
*******************************************************
Start to test ...
Test1 ...
CONFIG_ACPI=y
CONFIG_ACPI_PROCESSOR=y
test T-state support on CPU0 ............
T state count = 8
T0: supported
T1: supported
T2: supported
T3: supported
T4: supported
T5: supported
T6: supported
T7: supported
test CPU0: PASS
Test2 ...
test T-state function on CPU0 ............
T state count = 8
set T0 on CPU0 ...
Current CPU0 throttling state T0: 0%
set T1 on CPU0 ...
Current CPU0 throttling state T1: 2%
set T2 on CPU0 ...
Current CPU0 throttling state T2: 12%
set T3 on CPU0 ...
Current CPU0 throttling state T3: 28%
set T4 on CPU0 ...
Current CPU0 throttling state T4: 44%
set T5 on CPU0 ...
Current CPU0 throttling state T5: 60%
set T6 on CPU0 ...
Current CPU0 throttling state T6: 76%
set T7 on CPU0 ...
Current CPU0 throttling state T7: 92%
test CPU0: PASS
Test3 ...
test T-state function on CPU0 ............
T state count = 8
Set P0:T0 on CPU0 ...
Current CPU0 throttling state T0: 0%
Set P0:T1 on CPU0 ...
Current CPU0 throttling state T1: 23%
Set P0:T2 on CPU0 ...
Current CPU0 throttling state T2: 30%
Set P0:T3 on CPU0 ...
Current CPU0 throttling state T3: 42%
Set P0:T4 on CPU0 ...
Current CPU0 throttling state T4: 57%
Set P0:T5 on CPU0 ...
Current CPU0 throttling state T5: 67%
Set P0:T6 on CPU0 ...
Current CPU0 throttling state T6: 81%
Set P0:T7 on CPU0 ...
Current CPU0 throttling state T7: 94%
test CPU0: PASS
------------
Test Summary:
-------------
TOTAL: 3
PASS: 3
FAIL: 0
NOTSUPPORT: 0
UNRESOLVED: 0
UNTESTED: 0
-------------
ACPI ABAT finished...
