sanjoy@xxxxxxxxxxxxxx schrieb: >> These messages appear every 10 seconds! >> > > Do you have thermal polling turned on? > > more /proc/acpi/thermal_zone/*/polling_frequency > > Not that you should turn the polling off, but maybe every time a > thermal poll is run, the embedded controller (ec) does an UPDT, which > also means it looks at the battery state. And maybe the UPDT causes > the namespace AE_NOT_FOUND. Perhaps it didn't cause a problem before > because the default used to be ec_intr=0, and the ec worked fine with > that setting. > > You could try booting with ec_intr=0 to see if it suppresses the > problem. > > I've spent a while (see bugzilla #5989) debugging the consequences of > changing the default from ec_intr=0 to ec_intr=1 (which happened in > 2.6.16-rc* sometime -- see the #5989 bugzilla entries for the exact > git commit id). Probably it's a good change in general -- I leave > that to the experts -- but it has certainly exposed a few troubles in > the mangy BIOS on my TP 600X. > I don't care anymore; updating to 2.6.16 solved my problems ;-) Now the Kernel boots without any Kernelparameters at all ! - To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
