Hi Olof & Greg, Ok I thought about what this means in practice a bit more over the w/e, and I think we need to drag this discussion on for a bit more. On Fri, Jan 25, 2019 at 11:23 PM Daniel Vetter <daniel@xxxxxxxx> wrote: > > On Fri, Jan 25, 2019 at 10:16:12AM -0800, Olof Johansson wrote: > > We're starting to see more of these kind of devices, the current > > upcoming wave will likely be around machine learning and inference > > engines. A few drivers have been added to drivers/misc for this, but > > it's timely to make it into a separate group of drivers/subsystem, to > > make it easier to find them, and to encourage collaboration between > > contributors. > > > > Over time, we expect to build shared frameworks that the drivers will > > make use of, but how that framework needs to look like to fill the needs > > is still unclear, and the best way to gain that knowledge is to give the > > disparate implementations a shared location. > > > > There has been some controversy around expectations for userspace > > stacks being open. The clear preference is to see that happen, and any > > driver and platform stack that is delivered like that will be given > > preferential treatment, and at some point in the future it might > > become the requirement. Until then, the bare minimum we need is an > > open low-level userspace such that the driver and HW interfaces can be > > exercised if someone is modifying the driver, even if the full details > > of the workload are not always available. > > > > Bootstrapping this with myself and Greg as maintainers (since the current > > drivers will be moving out of drivers/misc). Looking forward to expanding > > that group over time. > > > > Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> > > Signed-off-by: Olof Johansson <olof@xxxxxxxxx> > > I spent a bit of time reading the proposed drivers, mostly just their uapi > (habanalabs and ocxl&cxl), and there's really no technical difference I > think between an accelaration driver sitting in drivers/gpu and an > accelaration driver sitting in drivers/accel. Except: > > - drivers/gpu already has common interfaces for the things you'll probably > want to standardize (buffer sharing, syncronization primitives, > scheduler - right now we're working on figuring out some common > tracepoints). > > - Maybe even more important, drivers/gpu has the lessons learned in its > codebase about what not to standardize between drivers (everything else, > you'll regret it, we've been there). > > - drivers/gpu is the subsystem with 20 years of experience writing tiny > shim drivers in the kernel for high performance accelarators that need a > pretty huge stack in userspace to make them do anything useful. 20 years > ago all the rage to make faster was graphics, now it's AI. Looks exactly > the same from a kernel pov - command buffers, gigabytes of DMA and a > security/long term support nightmare. > > - drivers/gpu requires open source. The real thing, not some demo that > does a few DMA operations. > > And now we have drivers/accel and someone gets to explain to nvidia (or > arm or whatever) how their exact same drivers (and well run engineering > orgs really only invent command submission once) can be merged when they > say it's for a TPU, and will get rejected when they say it's for a GPU. Or > someone gets to explain to TPU+GPU vendors why their driver is not cool > (because we'd end up with two), while their startup-competition only doing > a TPU is totally fine and merged into upstream. Or we just stuff all the > kernel drivers for blobby userspace into drivers/accel and otherwise > ignore each another. One awkward scenario I've missed is the following: 1. the fully open stack for accelarating glow/tensorflow/DNN that we're planning to make happen takes off. Rough idea is llvm+spriv+clover (in mesa) + gallium backends (also mesa3d) + drm. 2. if that's the case and someone writes an r/e'ed driver for such a TPU (and the vendor supporting only their blob stack) then the reasonable thing would be to write that stack on top of the existing open source accelarator infrastructure. So a new/2nd driver in the kernel, using the drm+mesa infrastructure. 3. this means to not block r/e efforts on we need to be ok with duplicated drivers between drivers/accel and drivers/gpu - not being able to share code with all the other programmable accelarators will make it nigh impossible to have a working r/e'ed stack. We already see this on the gl/vk/cl side, where the mesa drivers tend to be 1-2 orders of magnitude smaller than the proprietary/vendor stacks (whether open or closed). > I guess that last option would at least somewhat help me, since I wont > ever have to explain anymore why we're the radical commies on dri-devel > :-) > > Anyway, only reason I replied here again is because I accidentally started > a private thread (well was too lazy to download the mbox to properly > reply), and that's not good either. But I don't think anyone's going to > change their opinion here, I think this reply is just for the record. > > Cheers, Daniel > > PS: Seen that there's a v2 of this now with Documentation, hasn't reached > my inbox (yet). I don't think that one clarifies any of the tricky > questions between drivers/gpu and drivers/accel, so figured won't harm if > I leave the reply on v1. Given the above revising my stance, and I think your item to exclude overlap between drivers/accel and drivers/gpu is actually harmful. And we instead need a line that yes, there is overlap, and we do expect the occasional duplicated driver for the same hardware. I think that's going to have the best outcome: - It's not going to piss off the drivers/gpu people any more than drivers/accel itself does, you already scored all the sighs you'll get I think. So won't make things worse. - It's going to be the technically sound decision, since no more "is this a tpu or gpu" non-technical tricky questions that just depend upon what you market a chip for, instead of what it is. - I think it's going to be much quicker to prove whether drivers/gpu is too strict with merging drivers and has harmed the overall ecosystem, since you'll have many more drivers to potentially merge. One argument in your favour is clearly that we've never tried to drop the open source userspace requirement. Imo if we're going to do this experiment, we should do it right. - There's not going to be a problem for accelarators that need to work together with atomic modeset drivers or v4l drivers for displaying their computation results - all you need for that is dma-buf import, and you'll need that sooner or later anyway in drivers/accel. dma-buf compatibility extends all gfx userspace protocols (I think we rev'ed them all to add dma-buf support). There's also not going to be coordination problems due to this with drivers/gpu, since all the dma-buf bits you'll need are already in drivers/dma-buf. - It might actually make r/e'ing gpus easier, since currently you need to boot 2 different kernels: One with the upstream drm stack, the other with downstream vendor stack. If you actually manage to get all these drivers merged in a useable state that would become better. - Essentially this would make drivers/accel the -staging for drivers/gpu, at least from our pov. I don't think that's going to be an issue - with Greg you already have the residential expert for maintaining dumpster fires on the team. And as long as we don't try to share code (beyond stuff in drivers/dma-buf) I don't think this will result in the coordination pains we've had with display drivers in -staging. - This is not going to set a new precedence - there's been plenty of duplicated subsystem, especially for drivers. Occasionally you just need to burn it all down and start over. - Like with your proposal here for drivers/accel we can always change the rules in a few years, or whenever it's clear what to do. And I think the positions between the drivers/gpu and drivers/accel folks are fundamentally opposed, there's not really a room for a both ways compromise, best seems to decide this by actually trying it out. - Plus, I can just point people at you instead of having to explain why we insist on open source for accelarators in drivers/gpu. That wasn't meant as a joke, not entirely at least, it's kinda tiring to have this discussion at least once every year ... tldr; If you want to do this, do it right. All we need is to drop your paragraph about avoiding overlap with drivers/gpu, and instead acknowledge that there is an overlap with the accelarator drivers in drivers/gpu and clearly state that both subsystems are going to be ok with that overlap and duplication. I'd ack that version. Cheers, Daniel > > --- > > MAINTAINERS | 8 ++++++++ > > drivers/Kconfig | 2 ++ > > drivers/Makefile | 1 + > > drivers/accel/Kconfig | 16 ++++++++++++++++ > > drivers/accel/Makefile | 5 +++++ > > 5 files changed, 32 insertions(+) > > create mode 100644 drivers/accel/Kconfig > > create mode 100644 drivers/accel/Makefile > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index ddcdc29dfe1f6..8a9bbaf8f6e90 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -7033,6 +7033,14 @@ W: https://linuxtv.org > > S: Supported > > F: drivers/media/platform/sti/hva > > > > +HW ACCELERATOR OFFLOAD SUBSYSTEM > > +M: Olof Johansson <olof@xxxxxxxxx> > > +M: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> > > +L: linux-accelerators@xxxxxxxxxxxxxxxx > > +S: Supported > > +F: drivers/accel/ > > +F: Documentation/accelerators/ > > + > > HWPOISON MEMORY FAILURE HANDLING > > M: Naoya Horiguchi <n-horiguchi@xxxxxxxxxxxxx> > > L: linux-mm@xxxxxxxxx > > diff --git a/drivers/Kconfig b/drivers/Kconfig > > index 4f9f99057ff85..3cc461f325569 100644 > > --- a/drivers/Kconfig > > +++ b/drivers/Kconfig > > @@ -228,4 +228,6 @@ source "drivers/siox/Kconfig" > > > > source "drivers/slimbus/Kconfig" > > > > +source "drivers/accel/Kconfig" > > + > > endmenu > > diff --git a/drivers/Makefile b/drivers/Makefile > > index 04da7876032cc..e4be06579cc5d 100644 > > --- a/drivers/Makefile > > +++ b/drivers/Makefile > > @@ -186,3 +186,4 @@ obj-$(CONFIG_MULTIPLEXER) += mux/ > > obj-$(CONFIG_UNISYS_VISORBUS) += visorbus/ > > obj-$(CONFIG_SIOX) += siox/ > > obj-$(CONFIG_GNSS) += gnss/ > > +obj-$(CONFIG_ACCEL) += accel/ > > diff --git a/drivers/accel/Kconfig b/drivers/accel/Kconfig > > new file mode 100644 > > index 0000000000000..13b36c0398895 > > --- /dev/null > > +++ b/drivers/accel/Kconfig > > @@ -0,0 +1,16 @@ > > +# > > +# Drivers for hardware offload accelerators > > +# See Documentation/accel/README.rst for more details > > +# > > + > > +menuconfig ACCEL > > + bool "Hardware offload accelerator support" > > + help > > + HW offload accelerators are used for high-bandwidth workloads > > + where a higher-level kernel/userspace interface isn't suitable. > > + > > +if ACCEL > > + > > +comment "HW Accellerator drivers" > > + > > +endif > > diff --git a/drivers/accel/Makefile b/drivers/accel/Makefile > > new file mode 100644 > > index 0000000000000..343bbb8f45a14 > > --- /dev/null > > +++ b/drivers/accel/Makefile > > @@ -0,0 +1,5 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +# > > +# Makefile for accel devices > > +# > > + > > -- > > 2.11.0 > > > > -- > Daniel Vetter > Software Engineer, Intel Corporation > http://blog.ffwll.ch -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
