Wesley, For quite some time the 11c11040 modem has not been supported. Codec: LSI ID 1040 Address: 1 MFG Function Id: 0x2 (unsol 1) Vendor Id: 0x11c11040 Subsystem Id: 0x103c1378 Revision Id: 0x100200 Modem Function Group: 0x1 The audio card hosts a softmodem chip: 0x11c11040 The softmodem chip 11c11040 is hosted on the Subsytem of the High Definition Audio card, and is supported by the AgereSystems/LSI driver pair agrmodem + agrserial, which is provided by the most current package agrsm-11c11040-version at http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ If not a Conexant modem, the driver agrsm with its dependent drivers: ---------- provide audio + modem support with the modem chip residing on the subsystem. Any particular card can host any one of several soft modem chips. === Finished firmware and bootup diagnostics, next deducing cogent software. === Predictive diagnostics for card in bus 00:1b.0: Modem chipset detected on NAME="Audio device: Intel Corporation 82801I " CLASS=0403 PCIDEV=8086:293e SUBSYS=103c:3037 IRQ=48 HDA2=00:1b.0 SOFT=8086:293e.HDA HDAchipVendorID=11c1 CHIP=0x11c11040 IDENT=agrsm Driver=agrsm package=agrsm-11c11040 For candidate modem in: 00:1b.0 0403 Audio device: Intel Corporation 82801I Primary device ID: 8086:293e Subsystem PCI_id 103c:3037 Softmodem codec or chipset from diagnostics: 0x11c11040 from Archives: The HDA card softmodem chip is 0x11c11040 Support type needed or chipset: agrsm Writing DOCs/Intel.txt The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrserial driver pair. There are a few different chipsets which use this driver pair, but they use different code resources: Chipsets KV* PackageNames (most current as of November 2009) ---------------------------------------------------------------------------------------------- 11c1:048c and 11c1:048f 2.6.29 agrsm048pci-2.1.60_20100108_i386.deb or agrsm048pci-2.1.60_20100108.tar.gz 11c1:0620 2.6.31 agrsm06pci-2.1.80_20100106_i386.deb or agrsm06pci-2.1.80~20100106.tar.gz !! 11c11040 (on HDA audio cards) 2.6.31 agrsm-11c11040_20091225_i386.deb or agrsm-11c11040-2.1.80~20091225.tar.bz2 !! All available at: http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ Additionally there are; automation & testing agrsm-tools_0.0.1_all.deb or agrsm-tools-0.0.1-2.noarch.rpm General background agrsm_howto.txt ------------------------------------------------------------------------------------------------ * KV == latest kernel release with a reported success !! Latest update with major credit to Nikolay Zhuravlev But see conflict issue: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html For the 11c11040 chip with kernels 2.6.31 and later a change in a modules loading settingmay be necessary. Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for your Distro), change the phrase: options snd-hda-intel power_save=10 to: options snd-hda-intel power_save=0 or the agrsm drivers will not function. For Ubuntu related systems this can be done with: $ sudo gedit /etc/modprobe.d/alsa-base.conf Report from Bjorn Wielens: Please note- trying to load the modules on a OpenSuSE 11.2 system gives an error about the module_version symbol. Using: # modprobe --force agrmodem # modprobe --force agrserial is necessary to load the drivers, and does not appear to cause ill effects. All of the above packages are dkms competent. This means that if your Linux distros dkms package is previously installed, if provides for future updates matching forthcoming kernels. -------------- end Agere Systems section ------------------- Best Regards, Antonio On Mon, Feb 2, 2015 at 7:18 AM, Wesley Tan <wrgt9740@xxxxxxxxx> wrote: > Kindly assist so I can send and receive faxes through modem. > > > Thank you.
