Anel,
scanModem reports that your modem would be supported under 32 bit
linux as the output shows:
`` There is no agrsm software support for x86_64 systems, through the
modem may be supported on Intel/i386 installations, which do more
slowly servce x86_64 processors. ''
if you had 32 bit linux, you would be able to try the following
``11c1:0620 2.6.31
agrsm06pci-2.1.80_20100106_i386.deb or
agrsm06pci-2.1.80~20100106.tar.gz !!''
Predictive diagnostics for card in bus 01:00.0:
Modem chipset detected on
NAME="Communication controller: LSI Corporation Lucent V.92 Data/Fax Modem"
CLASS=0780
PCIDEV=11c1:0620
SUBSYS=11c1:0620
IRQ=5
IDENT=agrsm
For candidate modem in: 01:00.0
0780 Communication controller: LSI Corporation Lucent V.92 Data/Fax Modem
Primary device ID: 11c1:0620
Support type needed or chipset: agrsm
There is no agrsm software support for x86_64 systems, through the modem may be
supported on Intel/i386 installations, which do more slowly servce
x86_64 processors.
The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
agrserial driver pair.
There are a few different chipsets which use this driver pair, but
they use different code resources:
Chipsets KV* PackageNames (most current as of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f 2.6.29
agrsm048pci-2.1.60_20100108_i386.deb or
agrsm048pci-2.1.60_20100108.tar.gz
11c1:0620 2.6.31
agrsm06pci-2.1.80_20100106_i386.deb or
agrsm06pci-2.1.80~20100106.tar.gz !!
11c11040 (on HDA audio cards) 2.6.31
agrsm-11c11040_20091225_i386.deb or
agrsm-11c11040-2.1.80~20091225.tar.bz2 !!
All available at:
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Additionally there are;
automation & testing agrsm-tools_0.0.1_all.deb or
agrsm-tools-0.0.1-2.noarch.rpm
General background agrsm_howto.txt
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success
!! Latest update with major credit to Nikolay Zhuravlev
But see conflict issue:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html
For the 11c11040 chip with kernels 2.6.31 and later a change in a
modules loading settingmay be necessary.
Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for
your Distro), change the phrase:
options snd-hda-intel power_save=10
to:
options snd-hda-intel power_save=0
or the agrsm drivers will not function. For Ubuntu related systems
this can be done with:
$ sudo gedit /etc/modprobe.d/alsa-base.conf
Report from Bjorn Wielens:
Please note- trying to load the modules on a OpenSuSE 11.2 system gives
an error about the module_version symbol. Using:
# modprobe --force agrmodem
# modprobe --force agrserial
is necessary to load the drivers, and does not appear to cause ill effects.
All of the above packages are dkms competent. This means that if your
Linux distros dkms package
is previously installed, if provides for future updates matching
forthcoming kernels.
-------------- end Agere Systems section -------------------
Best Regards,
Antonio
On Mon, Jun 10, 2013 at 8:38 AM, <anel@xxxxxxxxx> wrote:
>
