irmansyah, Did you try the code suggested by Marv? ============================ Imansyah, your USB modem is evidently an earlier model of the 0685 ZD Incorporated, 7000 HSDPA Modem which is in the USB ID database. There may be Linux support: https://github.com/Angstrom-distribution/meta-ti/blob/master/recipes-kernel/linux/linux-ti33x-psp-3.2/3.2.1/0039-usb-option-add-ZD-Incorporated-HSPA-modem.patch But following directions will be complex. Perhaps you can locate an eperienced Linux User nearby. MarvS scanModem Maintainer ============================ Best Regards, Antonio On Tue, Apr 9, 2013 at 8:16 AM, irmansyah imam <irmansyahi@xxxxxxxxx> wrote: > > My modem detected usb storage 0685:6000 not automatically modem ? > > 2013/4/8, Antonio Olivares <olivares14031@xxxxxxxxx>: > > Dear Irmansyah, > > > > scanModem recommends the following: > > > > If your modem is an > > external USB type, > > connected by an external serial cable, > > or mounted internally on an ISA card, > > then scanModem would not access it. > > > > Try with Root permission > > $ sudo wvdialconf /etc/wvdial.conf > > to detect these modem types and some USB modems. > > If the detection is successful, read the DOCs/wvdial.txt . > > Edit the /etc/wvdial.conf with Root permission: > > sudo gedit /etc/wvdial.conf > > will be able to dial out with Root permission: > > sudo wvdial > > > > If it is a usb modem did you try to identify it with above commands? > > > > If the modem was not found by wvdial, and you have alternate OS like > > windows please try the following: > > > > Many modems for which scanModem fails have Conexant chips. > > From http://www.linuxant.com/drivers/modemident.php > > get the ListModem tool, which will report on Conexant chipset modems > > > > If the above tests fail, please provide any independent information > > available on your modem. > > If an alternative boot into Microsoft windows can be done, do mouse > > clicks on: > > Start > Settings > Control Panel > Classical View (for Window XP) > > > System > >> Hardware > Device Manager > Modems > Click on the + > Modem. Double > >> click > >> to > > expand the graphic. Manufacturer information may be displayed. For > > example, > > CXT > > stands for Conexant. Click the Diagnostics Tab. Record any hardware ID > > or > > vendor > > and device information. From the Driver Details TAB, copy out the > > VENdor and DEVice information. > > Next do the Query Modem and record the ATI specifications displayed such > > as: > > ATI3 - Agere SoftModem Version 2.1.22 > > ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27 > > Try to identify the modem setup file, with name perhaps MODEM.INF. > > If may contain chipset Vendor informaton. > > > > scanModem tests for pci modems and did not find any in this case. > > > > Hope this helps, > > > > > > > > Antonio > > > > > > > > On Sat, Apr 6, 2013 at 7:19 AM, irmansyah imam <irmansyahi@xxxxxxxxx> > > wrote: > > > >> ---------- Forwarded message ---------- > >> From: irmansyah imam <irmansyahi@xxxxxxxxx> > >> Date: Wed, 3 Apr 2013 00:00:09 +0700 > >> Subject: advan dt 9 usb modem > >> To: discuss@xxxxxxxxxxxxx > >> > >> advan dt 9 usb modem vendor=0685 product=6000 not automatically modem > >> but > >> mmc storage > >> > >
