You could try the procedure I suggested for "unlinking" your modules. This once cured a modem problem on one of Antonio's system. MarvS On Mon, Jul 9, 2012 at 5:40 PM, Andrew Merczynski-Hait <andrewmh20@xxxxxxxxxx> wrote: > So at this point should I give up? > > -----Original Message----- > From: Philippe Vouters [mailto:philippe.vouters@xxxxxxxxxxx] > Sent: Monday, July 09, 2012 1:58 AM > To: Andrew Merczynski-Hait > Cc: Linmodems; Antonio Olivares; Marvin Stodolsky > Subject: Still NO DIALTONE despite dialing your home phone number > > Dear Andrew, > > I still get NO DIALTONE despite dialing your home phone number. I should > have got a BUSY response. So two possibilities : either you did not plug the > phone line correctly into the modem board or your board's modem chip is > unsupported by the Intel 537EP driver. The FA82537EP denomination may cover > an MD3200 chipset or a true FA82537EPchipset. For more information, refer to > this topic and replies at > http://www.mail-archive.com/asterisk-users@xxxxxxxxxxxxxxxx/msg39400.html > > -- > Philippe Vouters (Fontainebleau/France) > URL: http://vouters.dyndns.org/ > SIP: sip:Vouters@xxxxxxxxxxxxxxxx >
