Sergei,
scanModem reports that your modem is supported through hsfmodem
drivers. It reports that SLMODEMD driver is trying to serve the
modem, but since it is CXT, it cannot do the job.
Predictive diagnostics for card in bus 00:1e.3:
Modem chipset detected on
NAME="Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW "
CLASS=0703
PCIDEV=8086:266d
SUBSYS=14f1:5423
IRQ=17
SOFT=8086:266d.MC97
CodecArchived=CXT
CodecDiagnosed=CXT23
CodecClass=CXT
IDENT=hsfmodem
Driver=hsfmodem-drivers
For candidate modem in: 00:1e.3
0703 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
Primary device ID: 8086:266d
Subsystem PCI_id 14f1:5423
Softmodem codec or chipset from diagnostics: CXT23CXT, a Conexant
type using hsfmodem software.
from Archives: CXT, a Conexant type
using hsfmodem software.
CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem
software support.
Support type needed or chipset: hsfmodem
Writing DOCs/Intel.txt
For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt
Modem support packages from Linuxant include resources for compiling drivers.
If an installer package matching your kernel_version is not provided,
just install a generic code package.
Start at http://www.linuxant.com/drivers/hsf/full for
eventually download of a hsfmodem-7.68.00.12full_k.???.zip package
with ??? the package type (deb, rpm, tar etc)
These packages have compiled drivers but will also compile a driver,
if there is a mismatch between the resident kernel and provided driver.
The generic hsfmodem-7.68.00.12full.tar.gz package only provides
compiling support
Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.32_5_686
They can be found through
http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm
permission:
dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Read DOCs/Conexant.txt
Linuxant has support for the last kernel 2.6.31.X at the page:
http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
after this the modem driver should be compiled against the running
kernel and a generic package should be used:
http://www.linuxant.com/drivers/hsf/full/archive/hsfmodem-7.80.02.06full/hsfmodem_7.80.02.06full_i386.deb.zip
and instructions provided:
================
METHOD B: DEBIAN PACKAGE (*.deb)
If you have obtained the driver package in DEBIAN format:
1. install the package with "dpkg -i hsfmodem_{version}_{arch}.deb",
if apt-get or some other tool hasn't already done it for you.
2. if necessary, run "hsfconfig" to complete the installation, enter
license information, or to change your modem's configuration.
If you need to rebuild the Debian generic package from source, you can
get the TAR package, and from the top directory run: "make debdist". A
pre-compiled DEB package for the currently running kernel can be built
using "make debprecomp" instead.
================
from
http://www.linuxant.com/drivers/hsf/install.php
This is for the free driver and to enable full support(speed) then:
=====================
LICENSE KEYS / REGISTRATION
To enable your modem's full functionality (high-speed 56k data and
FAX), a license registration key must be obtained from Linuxant and
entered with "hsfconfig --license".
Without a proper license key, the modem can only operate in FREE mode,
limited to a maximum speed of 14.4Kbps (V.32bis) and the FAX
functionality will not be available.
=====================
if any problems arise, you should contact Linuxant support at
modem.support@xxxxxxxxxxxx
Regards,
Antonio
On Wed, Mar 14, 2012 at 5:39 AM, Sergei B.Shchelchkoff <hobo@xxxxxxx> wrote:
> hello,
>
> i send Modemdata to you.
> help me, please,
> i have modem but it does not working.
>
> thanks, Sergei.
>
>
