Benito Flores, USA, kernel 2.6.32-21-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.32-21-generic 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=i686,  Ubuntu ,  ALSA_version=1.0.21
Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010
 scanModem update of:  2011_08_08

Distrib_ID=Ubuntu
DistribCodeName=lucid
AptRepositoryStem=http://us.archive.ubuntu.com/ubuntu/


Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel.  For details see http://linux.dell.com/projects.shtml#dkms

 There are no blacklisted modem drivers in /etc/modprobe*  files 

 Potentially useful modem drivers now loaded are:
       snd_hda_intel           

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

Candidate PCI devices with modem chips are:
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
High Definition Audio cards can host modem chips.

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:2668	152d:0729	Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW 

 Modem interrupt assignment and sharing: 
 16:      11633   IO-APIC-fasteoi   uhci_hcd:usb5, tifm_7xx1, yenta, i915@pci:0000:00:02.0, HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[    0.101902] pci 0000:00:1b.0: reg 10 64bit mmio: [0xb0000000-0xb0003fff]
[    0.101966] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.101972] pci 0000:00:1b.0: PME# disabled
[   20.251233] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   20.251262] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   20.389567] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[  393.212102] HDA Intel 0000:00:1b.0: PCI INT A disabled
[  393.228032] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 223.727 msecs
[  393.272883] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[  393.272883] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[  393.424229] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  393.424237] HDA Intel 0000:00:1b.0: setting latency timer to 64

 The PCI slot 00:1b.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 


===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== 
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The modem cards detected by "aplay -l"  are: 
tarjeta 0: Intel [HDA Intel], dispositivo 6: Si3054 Modem [Si3054 Modem]

The /proc/asound/pcm file reports:
-----------------------
00-00: ALC260 Analog : ALC260 Analog : playback 1 : capture 1
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1

about /proc/asound/cards:
------------------------
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xb0000000 irq 16

 PCI slot 00:1b.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.32-21-generic/kernel/sound/pci/hda/snd-hda-intel.ko
 The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Motorola Si3054
Address: 1
Function Id: 0x2
Vendor Id: 0x10573055
Subsystem Id: 0x10573055
Revision Id: 0x100700
Modem Function Group: 0x1

 The audio card hosts a softmodem chip:  0x10573055

The softmodem chip 0x10573055 is in principle supported by the COMM support of slmodemd 
and the joint snd-hda-intel audio+modem driver, begun with ALSA version 1.0.13.  
For HDA cards with ALC883 chips, an upgrade to ALSA verions 1.0.15 way be necessary. 
Instructions for Upgrading snd-hda-intel and its dependent driver set are at:
http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html

If not a Conexant modem, the driver snd-hda-intel with its dependent drivers:
snd_hda_intel          21877  2 
snd_hda_codec          74201  3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel
snd_pcm                70662  4 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd                    54148  17 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
snd_page_alloc          7076  2 snd_hda_intel,snd_pcm
----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips. 

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 00:1b.0:
	Modem chipset  detected on
NAME="Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW "
CLASS=0403
PCIDEV=8086:2668
SUBSYS=152d:0729
IRQ=16
HDA2=00:1b.0
SOFT=8086:2668.HDA
HDAchipVendorID=1057
CHIP=0x10573055
IDENT=slmodemd
SLMODEMD_DEVICE=hw:0,6
Driver=snd-hda-intel

 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW 
      Primary device ID:  8086:2668
    Subsystem PCI_id  152d:0729 
    Softmodem codec or chipset from diagnostics: 0x10573055
                               from    Archives: 
                        The HDA card softmodem chip is 0x10573055
      

Support type needed or chipset:	slmodemd supporting the snd-hda-intel audio+modem driver

 An ALSA (Advanced Linux Sound Architecture) modem driver:  snd-hda-intel
 provides Low Level support enabling contact with the modem hardware.
 For all BUT Conexant chip soft modems (using hsfmodem software)
 complementary High Level support is through a Smartlink utility:  slmodemd

 Download from http://linmodems.technion.ac.il/packages/smartlink/ 
 the package SLMODEMD_gcc4.4_alsa1.0.21.tar.gz having a compiled slmodemd. Unpack under Linux with:
 	$ tar zxf SLMODEMD_gcc4.4_alsa1.0.21.tar.gz
 and read instructions therein. But briefly, the modem is setup with command:
 	sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6
 reporting dynamic creation of ports:
	/dev/ttySL0 --> /dev/pts/N   , with N some number
 Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
 

Writing DOCs/Intel.txt
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.4.3
             and the compiler used in kernel assembly: 4.4.3

 The patch utility is needed for compiling ALSA drivers, and possibly others. 

 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.4
   linuc_headers base folder /lib/modules/2.6.32-21-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default. 
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 273312 2010-03-06 19:59 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux