Thx for this info. I don't care building the module everytime if it works :-) But here is my problem :-) > Thomas, > dkms means Dynamic Kernel Module Support: > https://en.wikipedia.org/wiki/Dynamic_Kernel_Module_Support > linux.dell.com/dkms/permalink/ > If you update kernel, the module needed for smartlink modems > (slamr.ko) is build automagically and you won't have to worry about > compiling everytime you update the kernel. > Regards, > Antonio > On Fri, Feb 24, 2012 at 2:16 PM, Thomas Wilhelmi > <willi@xxxxxxxxxxxxxxxxxx> wrote: >> Hi, >> >> unfortunately you're stepping now beyond my Unix-Development-Knowledge. >> I don't know what you mean with "dkms". I know that I have all kernel >> sources and headers installed. >> >> Regards, >> Thomas >> >> >>> Thomas, >> >>> Attached is the drivers make.log generated by the dkms system, Ubuntu >>> for kernel 3.0.0-16-generic >>> Could be that some of your errors are due to changes under your >>> 3.1.9-1.4-default kernel resources. >>> Perhaps drop back to a 3.0.n kernel and try the compile again. >> >>> Also, below is the make record from the successful compile of the >>> slmodemd helper in the modem sub-folder: >> >>> slmodem-2.9.11-20110807/modem$ make >>> rebuild profile... >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_main.o -c modem_main.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_cmdline.o -c modem_cmdline.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem.o -c modem.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_datafile.o -c >>> modem_datafile.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_at.o -c modem_at.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_timer.o -c modem_timer.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_pack.o -c modem_pack.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_ec.o -c modem_ec.c >>> modem_ec.c: In function ‘rx_info’: >>> modem_ec.c:829:15: warning: variable ‘n’ set but not used >>> [-Wunused-but-set-variable] >>> modem_ec.c: In function ‘rx_super_cmd’: >>> modem_ec.c:889:6: warning: variable ‘n’ set but not used >>> [-Wunused-but-set-variable] >>> modem_ec.c: In function ‘rx_super_rsp’: >>> modem_ec.c:947:6: warning: variable ‘n’ set but not used >>> [-Wunused-but-set-variable] >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_comp.o -c modem_comp.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_param.o -c modem_param.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_debug.o -c modem_debug.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o homolog_data.o -c homolog_data.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_sinus.o -c dp_sinus.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_dummy.o -c dp_dummy.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o sysdep_common.o -c sysdep_common.c >>> gcc -o slmodemd modem_main.o modem_cmdline.o modem.o modem_datafile.o >>> modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o >>> modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o >>> dsplibs.o sysdep_common.o >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_test.o -c modem_test.c >>> modem_test.c: In function ‘modem_test_start’: >>> modem_test.c:110:7: warning: ignoring return value of ‘write’, >>> declared with attribute warn_unused_result [-Wunused-result] >>> gcc -o modem_test modem_test.o modem_cmdline.o modem.o >>> modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o >>> modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o >>> dp_dummy.o dsplibs.o sysdep_common.o >> >>> $ ls -lh slmodemd >>> -rwxrwxr-x 1 marv marv 1.3M 2012-02-24 09:59 slmodemd >> >>> Separately, I'm sending you the dkms competent tarball, which should >>> be unpacked in /usr/src/ >>> Then as root/adm run the following script, which you could name >>> dkms-slmodem and first >>> # chmod +x dkms-slmodem >> >>> #!/bin/sh >>> ## dkms-slmodem >>> VER=2.9.11~20110321 >>> PKG=sl-modem >>> /usr/sbin/dkms --rpm_safe_upgrade add -m $PKG -v $VER >>> /usr/sbin/dkms --rpm_safe_upgrade build -m $PKG -v $VER >>> /usr/sbin/dkms --rpm_safe_upgrade install -m $PKG -v $VER >>> exit 0 >>> # end >> >>> MarvS >> >> >>> On Fri, Feb 24, 2012 at 8:12 AM, Thomas Wilhelmi >>> <willi@xxxxxxxxxxxxxxxxxx> wrote: >>>> Hi, >>>> >>>> I tried a bit more and found the missing includes (at least some with >>>> the same name) and now I get the following error. I'm lost :-( >>>> >>>> Regards, >>>> Thomas >>>> >>>> --------------------------- cut ------------------------- >>>> cc -Wall -pipe -O3 -fomit-frame-pointer -D__KERNEL__ -DMODULE -DEXPORT_SYMTAB -DMODVERSIONS --include /lib/modules/3.1.9-1.4-default/build/include/config/modversions.h -I/lib/modules/3.1.9-1.4-default/build/include -I/usr/src/linux/include -I/usr/src/linux/arch/x86/include/ -I. -I./../modem -o amrmo_init.o -c amrmo_init.c >>>> In file included from /usr/src/linux/arch/x86/include/asm/bitops.h:449:0, >>>> from /usr/src/linux/include/linux/bitops.h:22, >>>> from /usr/src/linux/include/linux/kernel.h:17, >>>> from /usr/src/linux/include/linux/cache.h:4, >>>> from /usr/src/linux/include/linux/time.h:7, >>>> from /usr/src/linux/include/linux/stat.h:60, >>>> from /usr/src/linux/include/linux/module.h:10, >>>> from amrmo_init.c:57: >>>> /usr/src/linux/arch/x86/include/asm/arch_hweight.h: In function â__arch_hweight64â: >>>> /usr/src/linux/arch/x86/include/asm/arch_hweight.h:53:7: error: expected â:â or â)â before âPOPCNT64â >>>> In file included from /usr/src/linux/arch/x86/include/asm/thread_info.h:22:0, >>>> from /usr/src/linux/include/linux/thread_info.h:53, >>>> from /usr/src/linux/include/linux/preempt.h:9, >>>> from /usr/src/linux/include/linux/spinlock.h:50, >>>> from /usr/src/linux/include/linux/seqlock.h:29, >>>> from /usr/src/linux/include/linux/time.h:8, >>>> from /usr/src/linux/include/linux/stat.h:60, >>>> from /usr/src/linux/include/linux/module.h:10, >>>> from amrmo_init.c:57: >>>> /usr/src/linux/arch/x86/include/asm/processor.h: At top level: >>>> /usr/src/linux/arch/x86/include/asm/processor.h:114:30: error: âCONFIG_X86_L1_CACHE_SHIFTâ undeclared here (not in a function) >>>> /usr/src/linux/arch/x86/include/asm/processor.h:114:1: error: requested alignment is not a constant >>>> /usr/src/linux/arch/x86/include/asm/processor.h:156:0: warning: "cache_line_size" redefined [enabled by default] >>>> /usr/src/linux/include/linux/cache.h:64:0: note: this is the location of the previous definition >>>> /usr/src/linux/arch/x86/include/asm/processor.h: In function âload_cr3â: >>>> /usr/src/linux/arch/x86/include/asm/processor.h:187:1: error: âCONFIG_PAGE_OFFSETULâ undeclared (first use in this function) >>>> /usr/src/linux/arch/x86/include/asm/processor.h:187:1: note: each undeclared identifier is reported only once for each function it appears in >>>> /usr/src/linux/arch/x86/include/asm/processor.h: At top level: >>>> /usr/src/linux/arch/x86/include/asm/processor.h:236:1: error: requested alignment is not a constant >>>> /usr/src/linux/arch/x86/include/asm/processor.h:267:1: error: requested alignment is not a constant >>>> In file included from /usr/src/linux/arch/x86/include/asm/atomic.h:318:0, >>>> from /usr/src/linux/include/linux/atomic.h:4, >>>> from /usr/src/linux/arch/x86/include/asm/thread_info.h:24, >>>> from /usr/src/linux/include/linux/thread_info.h:53, >>>> from /usr/src/linux/include/linux/preempt.h:9, >>>> from /usr/src/linux/include/linux/spinlock.h:50, >>>> from /usr/src/linux/include/linux/seqlock.h:29, >>>> from /usr/src/linux/include/linux/time.h:8, >>>> from /usr/src/linux/include/linux/stat.h:60, >>>> from /usr/src/linux/include/linux/module.h:10, >>>> from amrmo_init.c:57: >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h:19:1: error: unknown type name âatomic64_tâ >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h: In function âatomic64_readâ: >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h:21:32: error: request for member âcounterâ in something not a structure or union >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h: At top level: >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h:31:33: error: unknown type name âatomic64_tâ >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h:43:41: error: unknown type name âatomic64_tâ >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h:57:41: error: unknown type name âatomic64_tâ >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h:73:49: error: unknown type name âatomic64_tâ >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h:89:33: error: unknown type name âatomic64_tâ >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h:102:33: error: unknown type name âatomic64_tâ >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h:117:41: error: unknown type name âatomic64_tâ >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h:135:41: error: unknown type name âatomic64_tâ >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h:154:49: error: unknown type name âatomic64_tâ >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h:171:48: error: unknown type name âatomic64_tâ >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h:180:48: error: unknown type name âatomic64_tâ >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h:188:37: error: unknown type name âatomic64_tâ >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h:193:34: error: unknown type name âatomic64_tâ >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h:207:39: error: unknown type name âatomic64_tâ >>>> /usr/src/linux/arch/x86/include/asm/atomic64_64.h:231:45: error: unknown type name âatomic64_tâ >>>> In file included from /usr/src/linux/include/linux/ktime.h:25:0, >>>> from /usr/src/linux/include/linux/timer.h:5, >>>> from /usr/src/linux/include/linux/workqueue.h:8, >>>> from /usr/src/linux/include/linux/kmod.h:26, >>>> from /usr/src/linux/include/linux/module.h:13, >>>> from amrmo_init.c:57: >>>> /usr/src/linux/include/linux/jiffies.h:39:3: error: #error Invalid value of HZ. >>>> /usr/src/linux/include/linux/jiffies.h:43:42: error: division by zero in #if >>>> /usr/src/linux/include/linux/jiffies.h:43:42: error: division by zero in #if >>>> /usr/src/linux/include/linux/jiffies.h:43:42: error: division by zero in #if >>>> /usr/src/linux/include/linux/jiffies.h:43:42: error: division by zero in #if >>>> /usr/src/linux/include/linux/jiffies.h:43:42: error: division by zero in #if >>>> /usr/src/linux/include/linux/jiffies.h:43:42: error: division by zero in #if >>>> /usr/src/linux/include/linux/jiffies.h:43:42: error: division by zero in #if >>>> /usr/src/linux/include/linux/jiffies.h:43:42: error: division by zero in #if >>>> /usr/src/linux/include/linux/jiffies.h:43:42: error: division by zero in #if >>>> /usr/src/linux/include/linux/jiffies.h:43:42: error: division by zero in #if >>>> /usr/src/linux/include/linux/jiffies.h:43:42: error: division by zero in #if >>>> /usr/src/linux/include/linux/jiffies.h:43:42: error: division by zero in #if >>>> /usr/src/linux/include/linux/jiffies.h:43:42: error: division by zero in #if >>>> /usr/src/linux/include/linux/jiffies.h:43:42: error: division by zero in #if >>>> /usr/src/linux/include/linux/jiffies.h:43:42: error: division by zero in #if >>>> /usr/src/linux/include/linux/jiffies.h:43:42: error: division by zero in #if >>>> In file included from /usr/src/linux/include/linux/sysctl.h:934:0, >>>> from /usr/src/linux/include/linux/kmod.h:27, >>>> from /usr/src/linux/include/linux/module.h:13, >>>> from amrmo_init.c:57: >>>> /usr/src/linux/include/linux/rcupdate.h:160:2: error: #error "Unknown RCU implementation specified to kernel configuration" >>>> In file included from /usr/src/linux/include/linux/elf.h:7:0, >>>> from /usr/src/linux/include/linux/module.h:14, >>>> from amrmo_init.c:57: >>>> /usr/src/linux/arch/x86/include/asm/elf.h: In function âelf_common_initâ: >>>> /usr/src/linux/arch/x86/include/asm/elf.h:165:6: error: âstruct pt_regsâ has no member named âr8â >>>> /usr/src/linux/arch/x86/include/asm/elf.h:165:17: error: âstruct pt_regsâ has no member named âr9â >>>> /usr/src/linux/arch/x86/include/asm/elf.h:165:28: error: âstruct pt_regsâ has no member named âr10â >>>> /usr/src/linux/arch/x86/include/asm/elf.h:165:40: error: âstruct pt_regsâ has no member named âr11â >>>> /usr/src/linux/arch/x86/include/asm/elf.h:166:6: error: âstruct pt_regsâ has no member named âr12â >>>> /usr/src/linux/arch/x86/include/asm/elf.h:166:18: error: âstruct pt_regsâ has no member named âr13â >>>> /usr/src/linux/arch/x86/include/asm/elf.h:166:30: error: âstruct pt_regsâ has no member named âr14â >>>> /usr/src/linux/arch/x86/include/asm/elf.h:166:42: error: âstruct pt_regsâ has no member named âr15â >>>> /usr/src/linux/arch/x86/include/asm/elf.h:167:3: error: âstruct thread_structâ has no member named âfsâ >>>> In file included from /usr/src/linux/include/linux/module.h:21:0, >>>> from amrmo_init.c:57: >>>> /usr/src/linux/arch/x86/include/asm/module.h: At top level: >>>> /usr/src/linux/arch/x86/include/asm/module.h:59:2: error: #error unknown processor family >>>> In file included from /usr/src/linux/include/linux/io.h:22:0, >>>> from /usr/src/linux/include/linux/pci.h:54, >>>> from amrmo_init.c:59: >>>> /usr/src/linux/arch/x86/include/asm/io.h: In function âvirt_to_physâ: >>>> /usr/src/linux/arch/x86/include/asm/io.h:113:1: error: âCONFIG_PAGE_OFFSETULâ undeclared (first use in this function) >>>> /usr/src/linux/arch/x86/include/asm/io.h: In function âphys_to_virtâ: >>>> /usr/src/linux/arch/x86/include/asm/io.h:131:1: error: âCONFIG_PAGE_OFFSETULâ undeclared (first use in this function) >>>> In file included from /usr/src/linux/arch/x86/include/asm/x86_init.h:5:0, >>>> from /usr/src/linux/arch/x86/include/asm/pgtable.h:19, >>>> from /usr/src/linux/include/linux/mm.h:42, >>>> from /usr/src/linux/arch/x86/include/asm/pci.h:4, >>>> from /usr/src/linux/include/linux/pci.h:1315, >>>> from amrmo_init.c:59: >>>> /usr/src/linux/arch/x86/include/asm/bootparam.h: At top level: >>>> /usr/src/linux/arch/x86/include/asm/bootparam.h:106:19: error: field âedid_infoâ has incomplete type >>>> In file included from /usr/src/linux/include/linux/mm.h:42:0, >>>> from /usr/src/linux/arch/x86/include/asm/pci.h:4, >>>> from /usr/src/linux/include/linux/pci.h:1315, >>>> from amrmo_init.c:59: >>>> /usr/src/linux/arch/x86/include/asm/pgtable.h: In function âpmd_page_vaddrâ: >>>> /usr/src/linux/arch/x86/include/asm/pgtable.h:430:1: error: âCONFIG_PAGE_OFFSETULâ undeclared (first use in this function) >>>> /usr/src/linux/arch/x86/include/asm/pgtable.h: In function âpud_page_vaddrâ: >>>> /usr/src/linux/arch/x86/include/asm/pgtable.h:501:1: error: âCONFIG_PAGE_OFFSETULâ undeclared (first use in this function) >>>> /usr/src/linux/arch/x86/include/asm/pgtable.h: In function âpgd_page_vaddrâ: >>>> /usr/src/linux/arch/x86/include/asm/pgtable.h:541:1: error: âCONFIG_PAGE_OFFSETULâ undeclared (first use in this function) >>>> In file included from /usr/src/linux/arch/x86/include/asm/pci.h:4:0, >>>> from /usr/src/linux/include/linux/pci.h:1315, >>>> from amrmo_init.c:59: >>>> /usr/src/linux/include/linux/mm.h: In function âvirt_to_head_pageâ: >>>> /usr/src/linux/include/linux/mm.h:429:9: warning: implicit declaration of function â__pfn_to_pageâ [-Wimplicit-function-declaration] >>>> /usr/src/linux/include/linux/mm.h:429:1: error: âCONFIG_PAGE_OFFSETULâ undeclared (first use in this function) >>>> In file included from /usr/src/linux/arch/x86/include/asm/pci.h:4:0, >>>> from /usr/src/linux/include/linux/pci.h:1315, >>>> from amrmo_init.c:59: >>>> /usr/src/linux/include/linux/mm.h: In function âlowmem_page_addressâ: >>>> /usr/src/linux/include/linux/mm.h:759:2: warning: implicit declaration of function â__page_to_pfnâ [-Wimplicit-function-declaration] >>>> /usr/src/linux/include/linux/mm.h:759:1: error: âCONFIG_PAGE_OFFSETULâ undeclared (first use in this function) >>>> In file included from /usr/src/linux/include/linux/dma-mapping.h:8:0, >>>> from /usr/src/linux/include/asm-generic/pci-dma-compat.h:7, >>>> from /usr/src/linux/arch/x86/include/asm/pci.h:139, >>>> from /usr/src/linux/include/linux/pci.h:1315, >>>> from amrmo_init.c:59: >>>> /usr/src/linux/include/linux/scatterlist.h: In function âsg_set_bufâ: >>>> /usr/src/linux/include/linux/scatterlist.h:112:1: error: âCONFIG_PAGE_OFFSETULâ undeclared (first use in this function) >>>> In file included from /usr/src/linux/include/linux/hardirq.h:7:0, >>>> from /usr/src/linux/include/linux/interrupt.h:12, >>>> from amrmo_init.c:61: >>>> /usr/src/linux/arch/x86/include/asm/hardirq.h: At top level: >>>> /usr/src/linux/arch/x86/include/asm/hardirq.h:33:1: error: requested alignment is not a constant >>>> In file included from /usr/src/linux/include/linux/fs.h:389:0, >>>> from /usr/src/linux/include/linux/poll.h:12, >>>> from amrmo_init.c:62: >>>> /usr/src/linux/include/linux/dcache.h:172:1: error: requested alignment is not a constant >>>> In file included from /usr/src/linux/include/linux/poll.h:12:0, >>>> from amrmo_init.c:62: >>>> /usr/src/linux/include/linux/fs.h:1633:1: error: requested alignment is not a constant >>>> amrmo_init.c: In function âamrmo_unlocked_ioctlâ: >>>> amrmo_init.c:459:17: warning: implicit declaration of function â__copy_to_user_llâ [-Wimplicit-function-declaration] >>>> amrmo_init.c: In function âamrmo_initâ: >>>> amrmo_init.c:767:3: warning: implicit declaration of function âpci_match_idâ [-Wimplicit-function-declaration] >>>> amrmo_init.c:768:6: warning: implicit declaration of function âpci_dev_driverâ [-Wimplicit-function-declaration] >>>> make[2]: *** [amrmo_init.o] Error 1 >>>> make[2]: Leaving directory `/root/modem/src/slmodem-2.9.11-20110807/drivers' >>>> make[1]: *** [all] Error 2 >>>> make[1]: Leaving directory `/root/modem/src/slmodem-2.9.11-20110807/drivers' >>>> make: *** [drivers] Error 2 >>>> >>>> >>>> >>>>> Thomas, >>>> >>>>> If you Google search with "linux/init.h" , you will get cogent info. >>>> >>>>> But on my Ubuntu system, the problem doesn't exist with the 3.0.n >>>>> compiles being managed by the DKMS update system. >>>>> So DKMS knows where to find the newer files.h >>>> >>>>> Since I'm not under Linux now, I'll send you cogent DKMS command info later. >>>> >>>>> MarvS >>>> >>>> >>>>> On Thu, Feb 23, 2012 at 3:50 PM, Thomas Wilhelmi >>>>> <willi@xxxxxxxxxxxxxxxxxx> wrote: >>>>>> Hello, >>>>>> >>>>>> thx for the help. I tried to compile the package and you're right that >>>>>> I get some errors. The first one was indeed the different location of >>>>>> "modversions.h". Instead of the directory "linux" I found one in >>>>>> "config". The next error was the missing file "linux/module.h": I >>>>>> replaced the include with the existing "config/modules.h". Even there >>>>>> is a slight difference in the name. >>>>>> >>>>>> Now I'm stuck with the missing "linux/init.h". Here I cannot find the >>>>>> correct one. >>>>>> >>>>>> Best regards, >>>>>> Thomas >>>>>> >>>>>> >>>>>>> Thomas, >>>>>> >>>>>>> Our most recent tarball update is slmodem-2.9.11-20110807.tar.gz >>>>>>> and should be OK for 3.x kernels. With some Linux distros, there will >>>>>>> be a compile failure, dependent on where the MODVERSIONS info is >>>>>>> located in the linux/kernel headers. Do a trial compile wth the >>>>>>> following package and send us any failure message >>>>>> >>>>>>> Is DKMS support installed on your SuSE System. There is a DKMS >>>>>>> enabled package variant we could send you, which will do auto >>>>>>> upgrades. >>>>>> >>>>>>> MarvS >>>>>>> scanModem maintainer >>>>>> >>>>>>> On Thu, Feb 23, 2012 at 3:05 AM, Thomas Wilhelmi >>>>>>> <willi@xxxxxxxxxxxxxxxxxx> wrote: >>>>>>>> Hello, >>>>>>>> >>>>>>>> I have a USB Modem and a PCI Modem-Card. My system is a Suse 12.1 with >>>>>>>> the following characterisrica: >>>>>>>> >>>>>>>> Linux twisrv 3.1.9-1.4-default #1 SMP Fri Jan 27 08:55:10 UTC 2012 (efb5ff4) i686 i686 i386 GNU/Linux >>>>>>>> >>>>>>>> The characteristica of the Modems can be seen in the attached file >>>>>>>> (any more necessary?). The USB-Modem is working like a charme. But the >>>>>>>> PCI-Modem not. The slmodem and ungrab-winmodem sources I found are >>>>>>>> only for kernel 2.x. Are there any versions for 3.1 Kernels? >>>>>>>> >>>>>>>> Thanks in advance, >>>>>>>> Thomas >>>>>> >>>>>> >>>> >>>> >>
