Hi,
This is my first attempt to contact this group so apologize in advance if I= don't provide sufficient information.
I'm not exactly a newbie to linux and Fedora since I've used it back when i= t was called red hat...I've upgraded to Fedora 16 recently and boy how thin= gs have changed! Anyways, here is where I'm at:
lspci shows my modem as:
01:01.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISD= N interface
scanModem details as:
For candidate card in slot 01:01.0, firmware information and bootup diagnos= tics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:01.0 e159:0001 8086:0003 Communication controller: Ti=
ger Jet Network Inc. Tiger3XX Modem/ISDN interface
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 01:01.0 ----
[ 0.109098] pci 0000:01:01.0: [e159:0001] type 0 class 0x000780
[ 0.109120] pci 0000:01:01.0: reg 10: [io 0xa000-0xa0ff]
[ 0.109133] pci 0000:01:01.0: reg 14: [mem 0xf1004000-0xf1004fff]
[ 0.109200] pci 0000:01:01.0: supports D2
[ 0.109203] pci 0000:01:01.0: PME# supported from D0 D2 D3hot D3cold
[ 0.109209] pci 0000:01:01.0: PME# disabled
The PCI slot 01:01.0 of the modem card may be disabled early in a bootup process, but then enabled later. If modem drivers load but the modem is not responsive, read DOCs/Bootup.txt about possible fixes= .
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx if help is needed.
Predictive diagnostics for card in bus 01:01.0:
Modem chipset detected on
NAME=3D"Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISD= N interface"
CLASS=3D0780
PCIDEV=3De159:0001
SUBSYS=3D8086:0003
IRQ=3D11
HDA2=3D00:1b.0
IDENT=3DINTEL537
For candidate modem in: 01:01.0
0780 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISD= N interface
Primary device ID: e159:0001
Support type needed or chipset: INTEL537
So I visited http://vouters.dyndns.org/Intel/ and heeded Philippe's note to=
:
If you execute a 3.x.y kernel, download:
../Intel/intel-536EP-537EP_2011_12_11.tar.bz2<http://vouters.dyndns.org/Int=
el/intel-536EP-537EP_2011_12_11.tar.bz2>
...and continued to untar and try to build.
Issuing make clean and make 537 seem to work with a warning:
[root@pb3000 intel-536-537]# make clean
cd coredrv; make clean
make[1]: Entering directory `/root/intel-536-537/coredrv'
rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.* rm -rf .tmp_versions
make[1]: Leaving directory `/root/intel-536-537/coredrv'
rm -f *.o *.ko
[root@pb3000 intel-536-537]# make 537
cd coredrv; make clean
make[1]: Entering directory `/root/intel-536-537/coredrv'
rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.* rm -rf .tmp_versions
make[1]: Leaving directory `/root/intel-536-537/coredrv'
rm -f *.o *.ko
Module precompile check
Current running kernel is: 3.1.6-1.fc16.i686
/lib/modules... autoconf.h exists
diff: /boot/vmlinuz.autoconf.h: No such file or directory
autoconf.h matches running kernel
diff: /boot/vmlinuz.version.h: No such file or directory
version.h matches running kernel
make[1]: Entering directory `/root/intel-536-537'
Building for 537
3.1.6-1.fc16.i686
make[2]: Entering directory `/root/intel-536-537/coredrv'
make -C /lib/modules/3.1.6-1.fc16.i686/build M=3D/root/intel-536-537/coredr= v modules
make[3]: Entering directory `/usr/src/kernels/3.1.6-1.fc16.i686'
CC [M] /root/intel-536-537/coredrv/coredrv.o
CC [M] /root/intel-536-537/coredrv/clmmain.o
CC [M] /root/intel-536-537/coredrv/rts.o
CC [M] /root/intel-536-537/coredrv/task.o
CC [M] /root/intel-536-537/coredrv/uart.o
CC [M] /root/intel-536-537/coredrv/wwh_dflt.o
CC [M] /root/intel-536-537/coredrv/locks.o
CC [M] /root/intel-536-537/coredrv/softserial_io.o
CC [M] /root/intel-536-537/coredrv/softserial_ioctl.o
CC [M] /root/intel-536-537/coredrv/softserial.o
CC [M] /root/intel-536-537/coredrv/afedsp_int.o
LD [M] /root/intel-536-537/coredrv/Intel537.o
Building modules, stage 2.
MODPOST 1 modules
WARNING: could not find /root/intel-536-537/coredrv/.537core.lib.cmd for /r= oot/intel-536-537/coredrv/537core.lib
CC /root/intel-536-537/coredrv/Intel537.mod.o
LD [M] /root/intel-536-537/coredrv/Intel537.ko
make[3]: Leaving directory `/usr/src/kernels/3.1.6-1.fc16.i686'
make[2]: Leaving directory `/root/intel-536-537/coredrv'
make[1]: Leaving directory `/root/intel-536-537'
[root@pb3000 intel-536-537]#
However, make install fails complaining about kernel version:
[root@pb3000 intel-536-537]# make install
make[1]: Entering directory `/root/intel-536-537'
rm -f /usr/sbin/hamregistry.bin
bash 537_inst
running kernel 3.1.6-1.fc16.i686
unsupported kernel version: only 2.4.x and 2.6.x are supported
make[1]: *** [install] Error 1
make[1]: Leaving directory `/root/intel-536-537'
[root@pb3000 intel-536-537]#
Am I missing something? Any help here is super appreciated.
Patrick
