THANK YOU VERY MUCH, It compiled using the new Makefile and seems to run
ok, now I just need to get it configured to allow normal user account
access to the modem. Running KPPP as root ('kdesudo kppp') and
unchecking 'check for dialtone' allows me to query the modem just fine.
Any chance of getting some help setting it up for normal user access too
now? I greatly appreciate all you've both done to help me. I really
don't want to have to do all my faxing as root if I can avoid it. :)
On 11/21/2011 11:09 AM, Marvin Stodolsky wrote:
Replace the Makefile with the attached , after unzipping.
Then
$ sudo make cleam
$ sudo make all
and the compile will be OK, per below
The problem was an old kernel SUBLEVEL constraint, not cogent under
the 3.0.n kernels
MarvS
martian-full-20100123$ sudo make all
make -C kmodule/ modules
make[1]: Entering directory `/usr/src/pkg/martian/martian-full-20100123/kmodule'
make -C /lib/modules/3.0.0-12-generic/build
M="/usr/src/pkg/martian/martian-full-20100123/kmodule" modules
make[2]: Entering directory `/usr/src/linux-headers-3.0.0-12-generic'
CC [M] /usr/src/pkg/martian/martian-full-20100123/kmodule/martian.o
/usr/src/pkg/martian/martian-full-20100123/kmodule/martian.c: In
function ‘martian_isr’:
/usr/src/pkg/martian/martian-full-20100123/kmodule/martian.c:135:27:
warning: value computed is not used [-Wunused-value]
CC [M] /usr/src/pkg/martian/martian-full-20100123/kmodule/marsio.o
/usr/src/pkg/martian/martian-full-20100123/kmodule/marsio.c:358:11:
warning: ‘mars_read_register_rem’ defined but not used
[-Wunused-function]
/usr/src/pkg/martian/martian-full-20100123/kmodule/marsio.c:371:13:
warning: ‘mars_write_register_rem’ defined but not used
[-Wunused-function]
In file included from
/usr/src/linux-headers-3.0.0-12-generic/arch/x86/include/asm/uaccess.h:570:0,
from
/usr/src/pkg/martian/martian-full-20100123/kmodule/marsio.c:2:
In function ‘copy_from_user’,
inlined from ‘mars_download_dsp_user’ at
/usr/src/pkg/martian/martian-full-20100123/kmodule/marsio.c:767:22:
/usr/src/linux-headers-3.0.0-12-generic/arch/x86/include/asm/uaccess_32.h:211:26:
warning: call to ‘copy_from_user_overflow’ declared with attribute
warning: copy_from_user() buffer size is not provably correct [enabled
by default]
CC [M] /usr/src/pkg/martian/martian-full-20100123/kmodule/mfifo.o
LD [M] /usr/src/pkg/martian/martian-full-20100123/kmodule/martian_dev.o
Building modules, stage 2.
MODPOST 1 modules
CC /usr/src/pkg/martian/martian-full-20100123/kmodule/martian_dev.mod.o
LD [M] /usr/src/pkg/martian/martian-full-20100123/kmodule/martian_dev.ko
make[2]: Leaving directory `/usr/src/linux-headers-3.0.0-12-generic'
make[1]: Leaving directory `/usr/src/pkg/martian/martian-full-20100123/kmodule'
make -C modem/ all
make[1]: Entering directory `/usr/src/pkg/martian/martian-full-20100123/modem'
CC main.o
CC dumpers.o
CC log.o
CC session.o
CC mport.o
CC pty.o
pty.c: In function ‘accept_client’:
pty.c:290:18: warning: variable ‘timeout’ set but not used
[-Wunused-but-set-variable]
CC sysdep.o
CC isr.o
CC smp.o
CC core_if.o
CC coresubst.o
CC link.o
CC tweakrelocsdynamic.o
CC coreadd.o
CC elf386tweakrelocs
LD marscore.o
TWEAK marscore.o
LD martian_modem
make[1]: Leaving directory `/usr/src/pkg/martian/martian-full-20100123/modem'
On Mon, Nov 21, 2011 at 8:14 AM, Antonio Olivares
<olivares14031@xxxxxxxxx> wrote:
Edwin,
I don't get the errors that you are getting :( I get WARNINGS, but
that is about it. martian module is created see below:
[students@localhost martian-full-20100123]$ cat README
Martian is an alternative to the ltmodem and provides Linux support
for Agere WinModem hardware. Major difference is that core moved to
the user space.
Driver comprises two parts:
martian_dev - kernel module to configure devices, and serve irqs from it
martian_modem - user mode application to supply major IO, buffers,
user level streams.
For specific details concerning distribution and usage look in directories.
When configuring wvdial add "Carrier Check = no" line. No modem status
is checked yet. Kernel mode part is linux-2.6 module.
Project has a site http://martian.barrelsoutofbond.org/.
There is also maintenance within the Debian distribution
At http://www.debian.org/distrib/packages , search with "martian" for
direction to the most recent code.
[students@localhost martian-full-20100123]$ ls
ChangeLog Concept kmodule martian.h README scripts
Cleaning.txt INSTALL Makefile modem sample.txt
[students@localhost martian-full-20100123]$ cat INSTALL
=================
Building
=================
In root directory run
$ make all
==================
Installation
==================
In root directory run
$ su
# make install
==============
Running
==============
Load module and run martian_modem first.
# modprobe martian_dev
# martian_modem [Options] [Tty]
Now Tty is the name of the device file to represent your modem. You'll
supply it to the dialer. /dev/ttySM0 if argument omitted. Left
martian_modem running and start the dialer.
See options available
# martian_modem --help
==============
Auto
==============
In scripts/ directory run automate.sh.
$ cd scripts/
$ ./automate.sh
You can supply the option to be passed to martian_modem on loading like
$ ./automate --mode 0660
See ./automate.sh --help for more options.
==============
Notes
==============
'martian_modem' program is a crucial part of the driver. It should be
running as long as you access the modem.
For technical reasons carrier status support is not available for the
modem client. Configure dialer respectively. For wvdial add "Check
Carrier = No" line to the configuration file.
x86_64 platform.
----------------
martian_modem is a 32-bit application. It can be built on x86_64 the
way prescribed, but you need 32-bit development environment for that.
Second option is to use binary built on i386.
To compile and install module only do
$ make -C kmodule/ modules
$ su
# make -C kmodule/ install
[students@localhost martian-full-20100123]$ make -C kmodule/ modules
make: Entering directory
`/home/students/Downloads/martian-full-20100123/kmodule'
make -C /lib/modules/3.1.1-2.fc16.x86_64/build
M="/home/students/Downloads/martian-full-20100123/kmodule" modules
make[1]: Entering directory `/usr/src/kernels/3.1.1-2.fc16.x86_64'
CC [M] /home/students/Downloads/martian-full-20100123/kmodule/martian.o
/home/students/Downloads/martian-full-20100123/kmodule/martian.c: In
function ‘martian_isr’:
/home/students/Downloads/martian-full-20100123/kmodule/martian.c:135:27:
warning: value computed is not used [-Wunused-value]
CC [M] /home/students/Downloads/martian-full-20100123/kmodule/marsio.o
/home/students/Downloads/martian-full-20100123/kmodule/marsio.c:358:11:
warning: ‘mars_read_register_rem’ defined but not used
[-Wunused-function]
/home/students/Downloads/martian-full-20100123/kmodule/marsio.c:371:13:
warning: ‘mars_write_register_rem’ defined but not used
[-Wunused-function]
CC [M] /home/students/Downloads/martian-full-20100123/kmodule/mfifo.o
LD [M] /home/students/Downloads/martian-full-20100123/kmodule/martian_dev.o
Building modules, stage 2.
MODPOST 1 modules
CC /home/students/Downloads/martian-full-20100123/kmodule/martian_dev.mod.o
LD [M] /home/students/Downloads/martian-full-20100123/kmodule/martian_dev.ko
make[1]: Leaving directory `/usr/src/kernels/3.1.1-2.fc16.x86_64'
make: Leaving directory `/home/students/Downloads/martian-full-20100123/kmodule'
[students@localhost martian-full-20100123]$ make -C kmodule/ install
make: Entering directory
`/home/students/Downloads/martian-full-20100123/kmodule'
make -C /lib/modules/3.1.1-2.fc16.x86_64/build
M="/home/students/Downloads/martian-full-20100123/kmodule"
modules_install
make[1]: Entering directory `/usr/src/kernels/3.1.1-2.fc16.x86_64'
INSTALL /home/students/Downloads/martian-full-20100123/kmodule/martian_dev.ko
cp: cannot create regular file
`/lib/modules/3.1.1-2.fc16.x86_64/extra/martian_dev.ko': Permission
denied
DEPMOD 3.1.1-2.fc16.x86_64
FATAL: Could not open
/lib/modules/3.1.1-2.fc16.x86_64/modules.dep.temp for writing:
Permission denied
make[1]: *** [_emodinst_post] Error 1
make[1]: Leaving directory `/usr/src/kernels/3.1.1-2.fc16.x86_64'
make: *** [install] Error 2
make: Leaving directory `/home/students/Downloads/martian-full-20100123/kmodule'
[students@localhost martian-full-20100123]$ su -c 'make -C kmodule/ install'
Password:
make: Entering directory
`/home/students/Downloads/martian-full-20100123/kmodule'
make -C /lib/modules/3.1.1-2.fc16.x86_64/build
M="/home/students/Downloads/martian-full-20100123/kmodule"
modules_install
make[1]: Entering directory `/usr/src/kernels/3.1.1-2.fc16.x86_64'
INSTALL /home/students/Downloads/martian-full-20100123/kmodule/martian_dev.ko
DEPMOD 3.1.1-2.fc16.x86_64
make[1]: Leaving directory `/usr/src/kernels/3.1.1-2.fc16.x86_64'
if ! /sbin/modprobe -nq martian_dev ; then /sbin/depmod -a; fi
make: Leaving directory `/home/students/Downloads/martian-full-20100123/kmodule'
[students@localhost martian-full-20100123]$ ls /lib/modules/`uname -r`/
build modules.dep.bin modules.pcimap
extra modules.devname modules.seriomap
kernel modules.drm modules.softdep
modules.alias modules.ieee1394map modules.symbols
modules.alias.bin modules.inputmap modules.symbols.bin
modules.block modules.isapnpmap modules.usbmap
modules.builtin modules.modesetting source
modules.builtin.bin modules.networking updates
modules.ccwmap modules.ofmap vdso
modules.dep modules.order
[students@localhost martian-full-20100123]$ ls /lib/modules/`uname -r`/extra/
martian_dev.ko
[students@localhost martian-full-20100123]$ ls /lib/modules/`uname -r`/extra/ -l
total 536
-rw-rw-r--. 1 root root 546982 Nov 21 07:08 martian_dev.ko
Please try the following and send it to us(list discuss@xxxxxxxxxxxxx)
$ cd martian-full-20100123
$ make clean
$ make
$ sudo make install
if one of these commands fails, please post all messages that you get
and attach them here.
Regards,
Antonio
On Mon, Nov 21, 2011 at 6:58 AM, Antonio Olivares
<olivares14031@xxxxxxxxx> wrote:
Edwin,
It could be a detection problem? kernel 3.0.X is newer than 2.6.20,
2.6.39.X, etc. Maybe martian code is not 3.X kernel friendly, I
thought that there could be error messages about some
things(functions) that have changed with the new kernel releases, but
the make command returns something different. I will try to check up
on that and cc. to Marv in case he has some suggestions for you to try
out.
Regards,
Antonio
On Sun, Nov 20, 2011 at 10:51 PM, bartman2589<bartman2589@xxxxxxx> wrote:
Antonio, thanks for taking the time to try to help me with this, when I try
running just 'make' from within the folder I extracted the source to I get
the following message:
"The martian_dev.ko driver and the complementary helper martian_helper are
for use with kernels after 2.6.20. Use the martian-20080407.tar.gz for
earlier kernels."
It's as if it isn't recognizing that my kernel is newer than 2.6.20, I also
noticed in the ModemData.txt file that it doesn't seem to notice that the
'linux-headers-3.0.0-12-generic' package is in fact already installed
(though I think this is more of a problem with scanmodem itself).
Thanks,
Edwin
On 11/20/2011 12:35 PM, Antonio Olivares wrote:
Edwin,
On Sun, Nov 20, 2011 at 11:23 AM, bartman2589<bartman2589@xxxxxxx> wrote:
Hi to everyone who ends up receiving this, I'm having trouble
compiling/installing the 'martian-full-20100123' drivers obtained from
http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
under
Kubuntu 11.10 32 bit (if indeed that's the one I'm supposed to be using),
I've attached the output from scanmodem (the ModemData.txt file and the
scanout file), and here is the relevant output from the command 'sudo
lspci
-v':
03:01.0 Communication controller: Agere Systems 56k WinModem (rev 01)
Subsystem: Zoom Telephonics Inc Device 9300
Flags: bus master, medium devsel, latency 0, IRQ 9
Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
I/O ports at bc00 [size=8]
I/O ports at b800 [size=256]
Capabilities: [f8] Power Management version 2
I'm hoping someone can help me get this working. I'm a bit of a Linux
newb
and certainly not a linux programmer, but when I try to run 'make all'
from
a shell prompt in the folder I extracted the source code into
(/home/edwin/martian-full-20100123), I get the following error:
"make: *** No rule to make target `all'. Stop.'"
Did you try just make?
$ make
if it succeeds then, run
$ sudo make install
afterwards. If it does not please reply to this message and post the
error messages.
You do have the correct driver as scanModem recommends:
For candidate card in slot 03:01.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
03:01.0 11c1:0442 141b:9300 Communication controller:
Agere Systems
56k WinModem
Modem interrupt assignment and sharing:
19: 0 IO-APIC-fasteoi uhci_hcd:usb3
--- Bootup diagnostics for card in PCI slot 03:01.0 ----
[ 0.177339] pci 0000:03:01.0: [11c1:0442] type 0 class 0x000780
[ 0.177356] pci 0000:03:01.0: reg 10: [mem 0xfeaffc00-0xfeaffcff]
[ 0.177366] pci 0000:03:01.0: reg 14: [io 0xbc00-0xbc07]
[ 0.177376] pci 0000:03:01.0: reg 18: [io 0xb800-0xb8ff]
[ 0.177421] pci 0000:03:01.0: supports D2
[ 0.177424] pci 0000:03:01.0: PME# supported from D2 D3hot D3cold
[ 0.177428] pci 0000:03:01.0: PME# disabled
The PCI slot 03:01.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
If you are able to install the driver but the modem is unresponsive
please do as instructed above.
Regards,
Antonio
I have tried searching on the Internet to find references on how to
correct
this problem but I can't seem to find anything relevant that I can make
sense of. So I'm turning to the Linmodems community in the hopes that
somebody can help me figure this out. Incidentally I'm also trying to
install a similar modem into another computer, but I'll wait to see what
I
learn here before I attempt to proceed further with the other system (who
knows I may not need any help with that one once I get this one figured
out
:) ).
Thanks for any help anyone can provide,
Edwin Barton
