In The Name Of Allah The compassionate merciful
Hello ;
while my Dialup Modem works fine on my ubuntu 9.04 that is installed
beside this ubuntu 10.10 on system , there is problem with dialup
modem in ubuntu 10.10
It's hsfmodem
but see attacked files , what's your opinion ?
Regards dehqan
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.35-22-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.23
Linux version 2.6.35-22-generic (buildd@vernadsky) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #35-Ubuntu SMP Sat Oct 16 20:36:48 UTC 2010
scanModem update of: 2011_08_08
Distrib_ID=Ubuntu
DistribCodeName=maverick
AptRepositoryStem=http://archive.ubuntu.com/ubuntu
The dkms driver upgrade utilities are installed,
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 09da:000a A4 Tech Co., Ltd Port Mouse
ID 0df0:0103
ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
ID 1b24:4001
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
High Definition Audio cards can host modem chips.
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:284b 17aa:20ac Audio device: Intel Corporation 82801H
Modem interrupt assignment and sharing:
48: 233 1200 PCI-MSI-edge hda_intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[58567.981136] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[58568.077129] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[58568.077140] HDA Intel 0000:00:1b.0: setting latency timer to 64
[58568.077198] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[62490.888375] HDA Intel 0000:00:1b.0: PCI INT B disabled
[62490.904032] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 122.693 msecs
[62493.073133] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[62493.169202] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[62493.169208] HDA Intel 0000:00:1b.0: setting latency timer to 64
[62493.169267] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[74424.132410] HDA Intel 0000:00:1b.0: PCI INT B disabled
[74424.148034] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 122.647 msecs
[74426.317133] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[74426.417044] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[74426.417055] HDA Intel 0000:00:1b.0: setting latency timer to 64
[74426.417128] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[77369.876391] HDA Intel 0000:00:1b.0: PCI INT B disabled
[77369.892030] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 122.520 msecs
[77372.069134] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[77372.165225] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[77372.165236] HDA Intel 0000:00:1b.0: setting latency timer to 64
[77372.165301] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: AD198x Analog : AD198x Analog : playback 1 : capture 2
00-01: AD198x Digital : AD198x Digital : playback 1
01-00: poseidon audio : poseidon audio capture : capture 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfe220000 irq 48
1 [Telegent ]: ALSA driver - poseidon Audio
poseidon ALSA Audio
29 [ThinkPadEC ]: ThinkPad EC - ThinkPad Console Audio Control
ThinkPad Console Audio Control at EC reg 0x30, fw 7KHT24WW-1.08
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.35-22-generic/kernel/sound/pci/hda/snd-hda-intel.ko
The HDA diagnostics did not recognize a modem chip on the audio subsystem,
though a Conexant chip modem might not be recognized.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=17aa:20ac
IRQ=48
HDA2=00:1b.0
SOFT=8086:284b.HDA
ArchivedChip=0x14f12bfa
CodecClass=14f1
IDENT=hsfmodem
Driver=hsfmodem-drivers
For candidate modem in: 00:1b.0
Primary device ID:
Support type needed or chipset:
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.5
and the compiler used in kernel assembly: 4.4.5
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.35-22-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 273248 2010-07-09 21:11 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 ppp0 virbr0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
CPU0 CPU1
0: 45785976 6001708 IO-APIC-edge timer
1: 3347 9 IO-APIC-edge i8042
8: 1 0 IO-APIC-edge rtc0
9: 17993 283 IO-APIC-fasteoi acpi
12: 815797 1277 IO-APIC-edge i8042
14: 341043 51039 IO-APIC-edge ata_piix
15: 0 0 IO-APIC-edge ata_piix
16: 687252 402035 IO-APIC-fasteoi uhci_hcd:usb5, yenta, nvidia
17: 11 0 IO-APIC-fasteoi uhci_hcd:usb6, firewire_ohci
18: 0 0 IO-APIC-fasteoi uhci_hcd:usb7
19: 441 8 IO-APIC-fasteoi ehci_hcd:usb2
20: 160 10 IO-APIC-fasteoi uhci_hcd:usb3
21: 340294 188286 IO-APIC-fasteoi uhci_hcd:usb4
22: 5013621 1016258 IO-APIC-fasteoi ehci_hcd:usb1
44: 0 0 PCI-MSI-edge pciehp
46: 2432 6116 PCI-MSI-edge eth0
47: 492890 5425 PCI-MSI-edge ahci
48: 233 1200 PCI-MSI-edge hda_intel
49: 0 0 PCI-MSI-edge iwl3945
NMI: 0 0 Non-maskable interrupts
LOC: 16658537 31040627 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
PND: 0 0 Performance pending work
RES: 2112996 2466726 Rescheduling interrupts
CAL: 11404 13687 Function call interrupts
TLB: 96110 97263 TLB shootdowns
TRM: 36 36 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 271 267 Machine check polls
ERR: 19
MIS: 0
I to D3
[58567.048063] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D3
[58567.056065] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[58567.080063] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[58567.108052] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D3
[58567.108246] PM: late suspend of devices complete after 91.871 msecs
[58567.148056] ACPI: Preparing to enter system sleep state S3
[58567.288085] PM: Saving platform NVS memory
[58567.292871] Disabling non-boot CPUs ...
[58567.400044] CPU 1 is now offline
[58567.400048] SMP alternatives: switching to UP code
[58567.405916] Extended CMOS year: 2000
[58567.405916] Back to C!
[58567.405916] PM: Restoring platform NVS memory
[58567.405916] Extended CMOS year: 2000
[58567.405916] Enabling non-boot CPUs ...
[58567.405916] SMP alternatives: switching to SMP code
[58567.411157] Booting Node 0 Processor 1 APIC 0x1
[58567.405582] Initializing CPU#1
[58567.556156] CPU1 is up
[58567.556828] ACPI: Waking up from system sleep state S3
[58567.897237] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[58567.897387] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[58567.941055] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[58567.949063] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[58567.949112] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[58567.957064] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[58567.965064] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[58567.965124] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[58567.973064] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[58567.981064] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[58567.981136] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[58567.981222] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[58567.981310] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x4040, writing 0x20004040)
[58567.981328] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[58567.981428] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[58567.981520] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[58567.981609] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[58567.989064] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[58567.997063] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[58567.997108] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[58568.005064] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[58568.013064] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[58568.013120] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[58568.021066] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[58568.029065] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[58568.029114] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[58568.037066] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[58568.045064] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[58568.045123] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[58568.053064] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[58568.061064] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[58568.061110] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007)
[58568.061256] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[58568.061305] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[58568.061434] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0)
[58568.061441] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007)
[58568.061662] iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[58568.076036] firewire_ohci 0000:15:00.1: BAR 0: set to [mem 0xf8101000-0xf81017ff] (PCI address [0xf8101000-0xf81017ff]
[58568.076088] firewire_ohci 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802000)
[58568.076099] firewire_ohci 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[58568.076686] PM: early resume of devices complete after 179.589 msecs
[58568.076811] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[58568.076818] e1000e 0000:00:19.0: PME# disabled
[58568.076946] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[58568.076958] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[58568.076966] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[58568.076990] usb usb3: root hub lost power or was reset
[58568.077129] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[58568.077140] HDA Intel 0000:00:1b.0: setting latency timer to 64
[58568.077198] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[58568.077255] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY
[58568.077303] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[58568.077313] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[58568.077342] usb usb6: root hub lost power or was reset
[58568.077450] pci 0000:00:1e.0: setting latency timer to 64
[58568.077469] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[58568.077476] ata_piix 0000:00:1f.1: setting latency timer to 64
[58568.077540] ata2: port disabled. ignoring.
[58568.077559] ahci 0000:00:1f.2: setting latency timer to 64
[58568.098396] sd 2:0:0:0: [sda] Starting disk
[58568.112471] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[58568.112693] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[58568.112699] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[58568.112710] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[58568.112762] usb usb4: root hub lost power or was reset
[58568.116291] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[58568.116543] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[58568.116552] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[58568.116563] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[58568.116861] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[58568.117081] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[58568.117087] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[58568.117098] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[58568.117152] usb usb5: root hub lost power or was reset
[58568.117458] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[58568.117653] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[58568.117658] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[58568.117669] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[58568.117721] usb usb7: root hub lost power or was reset
[58568.118022] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[58568.118246] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[58568.118255] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[58568.118265] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[58568.184090] firewire_core: skipped bus generations, destroying all nodes
[58568.240070] PM: resume of drv:usb dev:usb6 complete after 141.994 msecs
[58568.240078] PM: resume of drv:hub dev:6-0:1.0 complete after 141.919 msecs
[58568.256201] PM: resume of drv:usb dev:usb4 complete after 158.408 msecs
[58568.257267] PM: resume of drv:hub dev:4-0:1.0 complete after 159.422 msecs
[58568.257289] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[58568.257291] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[58568.258668] ata1.00: ACPI cmd e3/00:79:00:00:00:a0 (IDLE) succeeded
[58568.269154] ata1.00: ACPI cmd e3/00:01:00:00:00:a0 (IDLE) succeeded
[58568.269298] PM: resume of drv:usb dev:usb7 complete after 171.121 msecs
[58568.269468] PM: resume of drv:usb dev:usb2 complete after 172.074 msecs
[58568.269550] PM: resume of drv:hub dev:7-0:1.0 complete after 171.359 msecs
[58568.269557] PM: resume of drv:hub dev:2-0:1.0 complete after 172.001 msecs
[58568.292896] ata1.00: configured for UDMA/33
[58568.344256] PM: resume of drv:usb dev:usb3 complete after 246.677 msecs
[58568.344266] PM: resume of drv:hub dev:3-0:1.0 complete after 246.554 msecs
[58568.372085] PM: resume of drv:usb dev:usb5 complete after 274.221 msecs
[58568.372097] PM: resume of drv:usb dev:usb1 complete after 274.941 msecs
[58568.372107] PM: resume of drv:hub dev:5-0:1.0 complete after 274.087 msecs
[58568.372170] PM: resume of drv:hub dev:1-0:1.0 complete after 274.856 msecs
[58568.372190] PM: resume of drv: dev:ep_81 complete after 210.514 msecs
[58568.383212] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 306.410 msecs
[58568.632080] usb 5-1: reset low speed USB device using uhci_hcd and address 15
[58568.755629] firewire_core: rediscovered device fw0
[58568.946154] PM: resume of drv:usb dev:5-1 complete after 847.425 msecs
[58568.946163] PM: resume of drv:usbhid dev:5-1:1.0 complete after 847.362 msecs
[58568.946168] PM: resume of drv:usbhid dev:5-1:1.1 complete after 847.311 msecs
[58569.180076] usb 5-2: reset low speed USB device using uhci_hcd and address 16
[58569.254548] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 1176.917 msecs
[58569.487135] PM: resume of drv:usb dev:5-2 complete after 1388.200 msecs
[58569.487160] PM: resume of drv:usbhid dev:5-2:1.0 complete after 1388.207 msecs
[58569.581067] usb 1-3: reset high speed USB device using ehci_hcd and address 48
[58569.712203] usb 1-3: device firmware changed
[58569.712225] PM: resume of drv:usb dev:1-3 complete after 1613.250 msecs
[58569.712234] PM: resume of drv:poseidon dev:1-3:1.0 complete after 1613.249 msecs
[58569.825069] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[58569.977092] PM: resume of drv:usb dev:3-2 complete after 1878.546 msecs
[58569.977115] PM: resume of drv:usb dev:3-2:1.0 complete after 1878.492 msecs
[58569.989760] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000/0x0
[58569.989762] Synaptics: Clickpad mode enabled
[58569.989764] serio: Synaptics pass-through port at isa0060/serio1/input0
[58570.028988] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input37
[58570.368064] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[58570.400939] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[58570.400942] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[58570.400945] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[58570.410545] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[58570.410548] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[58570.410551] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[58570.411451] ata3.00: configured for UDMA/133
[58570.427104] ata3.00: configured for UDMA/133
[58570.427107] ata3: EH complete
[58570.436976] PM: resume of drv:sd dev:2:0:0:0 complete after 2338.576 msecs
[58570.436988] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 2053.746 msecs
[58570.437008] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 2338.479 msecs
[58570.576076] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 138.950 msecs
[58570.576830] thinkpad_acpi: ACPI backlight control delay disabled
[58570.579475] PM: resume of devices complete after 2502.743 msecs
[58570.579680] PM: resume devices took 2.500 seconds
[58570.579708] PM: Finishing wakeup.
[58570.579709] Restarting tasks ...
[58570.579762] usb 1-3: USB disconnect, address 48
[58570.594270] done.
[58570.594276] video LNXVIDEO:01: Restoring backlight state
[58570.595117] [ pm_notifier_block : 170 ] event :4
[58570.595118]
[58570.732089] [ pd_video_exit : 1637 ]
[58570.732094] [ poseidon_delete : 211 ]
[58570.844061] usb 1-3: new high speed USB device using ehci_hcd and address 49
[58570.980435] usb 1-3: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64
[58570.984699] [ firmware_download : 238 ] download size : 64
[58571.156269] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[58571.210786] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[58571.211086] ADDRCONF(NETDEV_UP): eth0: link is not ready
[58571.383701] usb 1-3: USB disconnect, address 49
[58571.876034] usb 1-3: new high speed USB device using ehci_hcd and address 50
[58572.012133] [ pd_video_init : 1663 ] register VIDEO/VBI devices
[58572.012277] DVB: registering new adapter (Poseidon dvbt adapter)
[58572.012281] DVB: registering adapter 0 frontend 0 (Poseidon DVB-T)...
[58572.625998] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[58572.626002] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[58572.626248] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[58572.920460] psmouse serio8: ID: 10 00 64
[58573.136623] [ fire_audio_urb : 216 ]
[58576.519736] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[58576.756204] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio8/input/input38
[58582.008028]
[58582.008032] + TLG2300 auto suspend +
[58582.008033]
[58583.297016] eth0: no IPv6 routers present
[62490.473745] PM: Syncing filesystems ... done.
[62490.486819] PM: Preparing system for mem sleep
[62490.486833] [ pm_notifier_block : 170 ] event :3
[62490.486834]
[62490.486835] Freezing user space processes ... (elapsed 0.01 seconds) done.
[62490.500104] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[62490.516084] PM: Entering mem sleep
[62490.516108] Suspending console(s) (use no_console_suspend to debug)
[62490.616264]
[62490.616265] ++ TLG2300 resume ++
[62490.616266]
[62490.616268]
[62490.616268] + TLG2300 auto suspend +
[62490.616269]
[62490.632050] PM: suspend of drv:usb dev:1-3 complete after 115.501 msecs
[62490.670383] PM: suspend of drv:psmouse dev:serio8 complete after 153.911 msecs
[62490.688287] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[62490.780408] ACPI handle has no context!
[62490.780636] iwl3945 0000:03:00.0: Master Disable Timed Out, 100 usec
[62490.780992] ata2: port disabled. ignoring.
[62490.781122] ata_piix 0000:00:1f.1: PCI INT C disabled
[62490.781196] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[62490.781220] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[62490.781244] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[62490.781268] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[62490.781284] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY
[62490.781885] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[62490.781914] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[62490.781943] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[62490.784555] e1000e 0000:00:19.0: PME# enabled
[62490.784562] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[62490.793649] sd 2:0:0:0: [sda] Stopping disk
[62490.888375] HDA Intel 0000:00:1b.0: PCI INT B disabled
[62490.904032] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 122.693 msecs
[62491.215296] PM: suspend of drv:sd dev:2:0:0:0 complete after 527.018 msecs
[62491.215307] PM: suspend of drv:scsi dev:target2:0:0 complete after 526.964 msecs
[62491.215318] PM: suspend of drv:scsi dev:host2 complete after 526.907 msecs
[62491.248035] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 467.148 msecs
[62492.108550] PM: suspend of drv:nvidia dev:0000:01:00.0 complete after 1327.687 msecs
[62492.108574] PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 1323.977 msecs
[62492.108592] PM: suspend of drv: dev:pci0000:00 complete after 1323.967 msecs
[62492.108607] PM: suspend of devices complete after 1592.196 msecs
[62492.108610] PM: suspend devices took 1.592 seconds
[62492.132077] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[62492.140065] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D3
[62492.148065] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[62492.172065] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[62492.200055] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D3
[62492.200249] PM: late suspend of devices complete after 91.636 msecs
[62492.240054] ACPI: Preparing to enter system sleep state S3
[62492.380085] PM: Saving platform NVS memory
[62492.384885] Disabling non-boot CPUs ...
[62492.492045] CPU 1 is now offline
[62492.492048] SMP alternatives: switching to UP code
[62492.497976] Extended CMOS year: 2000
[62492.497976] Back to C!
[62492.497976] PM: Restoring platform NVS memory
[62492.497976] Extended CMOS year: 2000
[62492.497976] Enabling non-boot CPUs ...
[62492.497976] SMP alternatives: switching to SMP code
[62492.503215] Booting Node 0 Processor 1 APIC 0x1
[62492.497617] Initializing CPU#1
[62492.648159] CPU1 is up
[62492.648836] ACPI: Waking up from system sleep state S3
[62492.989241] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[62492.989380] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[62493.033055] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[62493.041064] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[62493.041116] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[62493.049064] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[62493.057064] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[62493.057126] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[62493.065064] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[62493.073064] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[62493.073133] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[62493.073203] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[62493.073286] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x4040, writing 0x20004040)
[62493.073304] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[62493.073390] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[62493.073481] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[62493.073586] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[62493.081064] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[62493.089063] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[62493.089108] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[62493.097064] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[62493.105064] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[62493.105118] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[62493.113065] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[62493.121064] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[62493.121113] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[62493.129066] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[62493.137064] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[62493.137118] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[62493.145064] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[62493.153064] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[62493.153107] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007)
[62493.153247] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[62493.153294] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[62493.153425] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0)
[62493.153433] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007)
[62493.153653] iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[62493.168035] firewire_ohci 0000:15:00.1: BAR 0: set to [mem 0xf8101000-0xf81017ff] (PCI address [0xf8101000-0xf81017ff]
[62493.168086] firewire_ohci 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802000)
[62493.168098] firewire_ohci 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[62493.168709] PM: early resume of devices complete after 179.612 msecs
[62493.168840] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[62493.168847] e1000e 0000:00:19.0: PME# disabled
[62493.168968] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[62493.168990] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[62493.169027] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[62493.169056] usb usb3: root hub lost power or was reset
[62493.169202] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[62493.169208] HDA Intel 0000:00:1b.0: setting latency timer to 64
[62493.169267] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[62493.169313] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY
[62493.169367] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[62493.169378] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[62493.169406] usb usb6: root hub lost power or was reset
[62493.169508] pci 0000:00:1e.0: setting latency timer to 64
[62493.169528] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[62493.169537] ata_piix 0000:00:1f.1: setting latency timer to 64
[62493.169601] ata2: port disabled. ignoring.
[62493.169618] ahci 0000:00:1f.2: setting latency timer to 64
[62493.189266] sd 2:0:0:0: [sda] Starting disk
[62493.202140] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[62493.202366] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[62493.202371] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[62493.202382] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[62493.202436] usb usb4: root hub lost power or was reset
[62493.204303] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[62493.204555] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[62493.204564] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[62493.204575] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[62493.204866] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[62493.205108] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[62493.205114] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[62493.205124] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[62493.205177] usb usb5: root hub lost power or was reset
[62493.205445] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[62493.205700] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[62493.205706] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[62493.205717] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[62493.205768] usb usb7: root hub lost power or was reset
[62493.206031] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[62493.206278] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[62493.206286] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[62493.206297] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[62493.272094] firewire_core: skipped bus generations, destroying all nodes
[62493.338003] PM: resume of drv:usb dev:usb6 complete after 149.043 msecs
[62493.338201] PM: resume of drv:hub dev:6-0:1.0 complete after 149.220 msecs
[62493.344137] PM: resume of drv:usb dev:usb4 complete after 155.478 msecs
[62493.344158] PM: resume of drv:hub dev:4-0:1.0 complete after 155.398 msecs
[62493.354900] PM: resume of drv:usb dev:usb7 complete after 165.901 msecs
[62493.355072] PM: resume of drv:usb dev:usb2 complete after 166.636 msecs
[62493.355083] PM: resume of drv:hub dev:7-0:1.0 complete after 166.072 msecs
[62493.355087] PM: resume of drv:hub dev:2-0:1.0 complete after 166.596 msecs
[62493.369270] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[62493.369273] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[62493.370657] ata1.00: ACPI cmd e3/00:79:00:00:00:a0 (IDLE) succeeded
[62493.371502] ata1.00: ACPI cmd e3/00:01:00:00:00:a0 (IDLE) succeeded
[62493.392890] ata1.00: configured for UDMA/33
[62493.440257] PM: resume of drv:usb dev:usb3 complete after 251.744 msecs
[62493.440267] PM: resume of drv:hub dev:3-0:1.0 complete after 251.670 msecs
[62493.456085] PM: resume of drv:usb dev:usb5 complete after 267.254 msecs
[62493.456094] PM: resume of drv:usb dev:usb1 complete after 268.246 msecs
[62493.456105] PM: resume of drv:hub dev:5-0:1.0 complete after 267.222 msecs
[62493.456167] PM: resume of drv:hub dev:1-0:1.0 complete after 267.916 msecs
[62493.456186] PM: resume of drv: dev:ep_81 complete after 206.491 msecs
[62493.466850] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 298.018 msecs
[62493.716077] usb 5-1: reset low speed USB device using uhci_hcd and address 15
[62493.840196] firewire_core: rediscovered device fw0
[62494.030152] PM: resume of drv:usb dev:5-1 complete after 840.553 msecs
[62494.030161] PM: resume of drv:usbhid dev:5-1:1.0 complete after 840.506 msecs
[62494.030166] PM: resume of drv:usbhid dev:5-1:1.1 complete after 840.434 msecs
[62494.264074] usb 5-2: reset low speed USB device using uhci_hcd and address 16
[62494.346341] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 1176.652 msecs
[62494.571140] PM: resume of drv:usb dev:5-2 complete after 1381.388 msecs
[62494.571164] PM: resume of drv:usbhid dev:5-2:1.0 complete after 1381.397 msecs
[62494.665065] usb 1-3: reset high speed USB device using ehci_hcd and address 50
[62494.796232] usb 1-3: device firmware changed
[62494.796243] PM: resume of drv:usb dev:1-3 complete after 1606.460 msecs
[62494.796253] PM: resume of drv:poseidon dev:1-3:1.0 complete after 1606.447 msecs
[62494.909210] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[62495.062095] PM: resume of drv:usb dev:3-2 complete after 1872.677 msecs
[62495.062118] PM: resume of drv:usb dev:3-2:1.0 complete after 1872.594 msecs
[62495.079574] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000/0x0
[62495.079576] Synaptics: Clickpad mode enabled
[62495.079579] serio: Synaptics pass-through port at isa0060/serio1/input0
[62495.118780] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input39
[62495.512055] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[62495.536878] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[62495.536881] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[62495.536884] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[62495.549935] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[62495.549938] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[62495.549941] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[62495.550893] ata3.00: configured for UDMA/133
[62495.567038] ata3.00: configured for UDMA/133
[62495.567041] ata3: EH complete
[62495.576371] PM: resume of drv:sd dev:2:0:0:0 complete after 2387.117 msecs
[62495.576384] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 2109.505 msecs
[62495.576402] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 2387.060 msecs
[62495.716044] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 139.527 msecs
[62495.716887] thinkpad_acpi: ACPI backlight control delay disabled
[62495.719530] PM: resume of devices complete after 2550.775 msecs
[62495.719735] PM: resume devices took 2.548 seconds
[62495.719762] PM: Finishing wakeup.
[62495.719764] Restarting tasks ...
[62495.719816] usb 1-3: USB disconnect, address 50
[62495.746700] done.
[62495.746706] video LNXVIDEO:01: Restoring backlight state
[62495.747512] [ pm_notifier_block : 170 ] event :4
[62495.747513]
[62495.759449] [ pd_video_exit : 1637 ]
[62495.759454] [ poseidon_delete : 211 ]
[62495.889052] usb 1-3: new high speed USB device using ehci_hcd and address 51
[62496.033968] usb 1-3: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64
[62496.036961] [ firmware_download : 238 ] download size : 64
[62496.141335] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[62496.197205] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[62496.197453] ADDRCONF(NETDEV_UP): eth0: link is not ready
[62496.422878] usb 1-3: USB disconnect, address 51
[62496.920047] usb 1-3: new high speed USB device using ehci_hcd and address 52
[62497.053641] [ pd_video_init : 1663 ] register VIDEO/VBI devices
[62497.053787] DVB: registering new adapter (Poseidon dvbt adapter)
[62497.053791] DVB: registering adapter 0 frontend 0 (Poseidon DVB-T)...
[62497.178274] [ fire_audio_urb : 216 ]
[62498.373400] psmouse serio9: ID: 10 00 64
[62498.466032] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[62498.466042] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[62498.466545] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[62501.870499] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[62502.084650] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio9/input/input40
[62506.001025]
[62506.001027] + TLG2300 auto suspend +
[62506.001028]
[62509.400042] eth0: no IPv6 routers present
[62509.881213] e1000e: eth0 NIC Link is Down
[62511.557893] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[62511.557897] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[72735.741097] usb 1-3: USB disconnect, address 52
[72735.750798] [ pd_video_exit : 1637 ]
[72735.750803] [ poseidon_delete : 211 ]
[72742.273115] usb 1-3: new high speed USB device using ehci_hcd and address 53
[72742.410536] scsi1219 : usb-storage 1-3:1.0
[72743.651761] usb 1-3: USB disconnect, address 53
[72744.021117] usb 1-3: new high speed USB device using ehci_hcd and address 54
[72744.169703] usbserial_generic 1-3:1.0: generic converter detected
[72744.169898] usb 1-3: generic converter now attached to ttyUSB0
[72744.170059] usbserial_generic 1-3:1.1: generic converter detected
[72744.170212] usb 1-3: generic converter now attached to ttyUSB1
[72744.171140] scsi1220 : usb-storage 1-3:1.2
[72744.171591] usbserial_generic 1-3:1.3: generic converter detected
[72744.171747] usb 1-3: generic converter now attached to ttyUSB2
[72745.139258] usb 1-3: USB disconnect, address 54
[72745.139745] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72745.139771] usbserial_generic 1-3:1.0: device disconnected
[72745.140051] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72745.140076] usbserial_generic 1-3:1.1: device disconnected
[72745.144730] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72745.144756] usbserial_generic 1-3:1.3: device disconnected
[72745.384093] usb 1-3: new high speed USB device using ehci_hcd and address 55
[72745.530479] usbserial_generic 1-3:1.0: generic converter detected
[72745.530573] usb 1-3: generic converter now attached to ttyUSB0
[72745.530629] usbserial_generic 1-3:1.1: generic converter detected
[72745.530689] usb 1-3: generic converter now attached to ttyUSB1
[72745.548715] scsi1221 : usb-storage 1-3:1.2
[72745.556609] usbserial_generic 1-3:1.3: generic converter detected
[72745.556690] usb 1-3: generic converter now attached to ttyUSB2
[72745.904348] usb 1-3: USB disconnect, address 55
[72745.904698] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72745.904708] usbserial_generic 1-3:1.0: device disconnected
[72745.904793] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72745.904802] usbserial_generic 1-3:1.1: device disconnected
[72745.908032] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72745.908041] usbserial_generic 1-3:1.3: device disconnected
[72746.177113] usb 1-3: new high speed USB device using ehci_hcd and address 56
[72746.315939] usbserial_generic 1-3:1.0: generic converter detected
[72746.316146] usb 1-3: generic converter now attached to ttyUSB0
[72746.316299] usbserial_generic 1-3:1.1: generic converter detected
[72746.316447] usb 1-3: generic converter now attached to ttyUSB1
[72746.320180] scsi1222 : usb-storage 1-3:1.2
[72746.320632] usbserial_generic 1-3:1.3: generic converter detected
[72746.320805] usb 1-3: generic converter now attached to ttyUSB2
[72746.433513] usb 1-3: USB disconnect, address 56
[72746.433851] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72746.433876] usbserial_generic 1-3:1.0: device disconnected
[72746.434110] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72746.434134] usbserial_generic 1-3:1.1: device disconnected
[72746.439687] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72746.439710] usbserial_generic 1-3:1.3: device disconnected
[72746.676061] usb 1-3: new high speed USB device using ehci_hcd and address 57
[72746.814224] usbserial_generic 1-3:1.0: generic converter detected
[72746.814316] usb 1-3: generic converter now attached to ttyUSB0
[72746.814372] usbserial_generic 1-3:1.1: generic converter detected
[72746.814427] usb 1-3: generic converter now attached to ttyUSB1
[72746.839371] scsi1223 : usb-storage 1-3:1.2
[72746.847542] usbserial_generic 1-3:1.3: generic converter detected
[72746.847637] usb 1-3: generic converter now attached to ttyUSB2
[72747.080477] usb 1-3: USB disconnect, address 57
[72747.080869] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72747.080895] usbserial_generic 1-3:1.0: device disconnected
[72747.081158] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72747.081183] usbserial_generic 1-3:1.1: device disconnected
[72747.087148] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72747.087172] usbserial_generic 1-3:1.3: device disconnected
[72747.324126] usb 1-3: new high speed USB device using ehci_hcd and address 58
[72747.465076] usbserial_generic 1-3:1.0: generic converter detected
[72747.465261] usb 1-3: generic converter now attached to ttyUSB0
[72747.465408] usbserial_generic 1-3:1.1: generic converter detected
[72747.465555] usb 1-3: generic converter now attached to ttyUSB1
[72747.466655] scsi1224 : usb-storage 1-3:1.2
[72747.467091] usbserial_generic 1-3:1.3: generic converter detected
[72747.467250] usb 1-3: generic converter now attached to ttyUSB2
[72747.846071] usb 1-3: USB disconnect, address 58
[72747.846436] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72747.846446] usbserial_generic 1-3:1.0: device disconnected
[72747.846535] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72747.846544] usbserial_generic 1-3:1.1: device disconnected
[72747.850765] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72747.850774] usbserial_generic 1-3:1.3: device disconnected
[72748.088058] usb 1-3: new high speed USB device using ehci_hcd and address 59
[72748.229080] usbserial_generic 1-3:1.0: generic converter detected
[72748.229266] usb 1-3: generic converter now attached to ttyUSB0
[72748.229415] usbserial_generic 1-3:1.1: generic converter detected
[72748.229562] usb 1-3: generic converter now attached to ttyUSB1
[72748.229954] scsi1225 : usb-storage 1-3:1.2
[72748.230261] usbserial_generic 1-3:1.3: generic converter detected
[72748.230413] usb 1-3: generic converter now attached to ttyUSB2
[72748.748752] usb 1-3: USB disconnect, address 59
[72748.749387] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72748.749412] usbserial_generic 1-3:1.0: device disconnected
[72748.749643] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72748.749667] usbserial_generic 1-3:1.1: device disconnected
[72748.750271] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72748.750295] usbserial_generic 1-3:1.3: device disconnected
[72749.024073] usb 1-3: new high speed USB device using ehci_hcd and address 60
[72749.552055] usb 1-3: device not accepting address 60, error -71
[72749.664067] usb 1-3: new high speed USB device using ehci_hcd and address 61
[72749.804780] usbserial_generic 1-3:1.0: generic converter detected
[72749.804950] usb 1-3: generic converter now attached to ttyUSB0
[72749.805105] usbserial_generic 1-3:1.1: generic converter detected
[72749.805249] usb 1-3: generic converter now attached to ttyUSB1
[72749.822788] scsi1226 : usb-storage 1-3:1.2
[72749.831683] usbserial_generic 1-3:1.3: generic converter detected
[72749.831776] usb 1-3: generic converter now attached to ttyUSB2
[72750.040723] usb 1-3: USB disconnect, address 61
[72750.041120] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72750.041146] usbserial_generic 1-3:1.0: device disconnected
[72750.041368] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72750.041392] usbserial_generic 1-3:1.1: device disconnected
[72750.041960] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72750.041985] usbserial_generic 1-3:1.3: device disconnected
[72750.312043] usb 1-3: new high speed USB device using ehci_hcd and address 62
[72750.454431] usbserial_generic 1-3:1.0: generic converter detected
[72750.454613] usb 1-3: generic converter now attached to ttyUSB0
[72750.454768] usbserial_generic 1-3:1.1: generic converter detected
[72750.454911] usb 1-3: generic converter now attached to ttyUSB1
[72750.457134] scsi1227 : usb-storage 1-3:1.2
[72750.457617] usbserial_generic 1-3:1.3: generic converter detected
[72750.457799] usb 1-3: generic converter now attached to ttyUSB2
[72750.697225] usb 1-3: USB disconnect, address 62
[72750.697548] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72750.697557] usbserial_generic 1-3:1.0: device disconnected
[72750.697652] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72750.697661] usbserial_generic 1-3:1.1: device disconnected
[72750.699609] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72750.699617] usbserial_generic 1-3:1.3: device disconnected
[72750.968109] usb 1-3: new high speed USB device using ehci_hcd and address 63
[72751.108399] usbserial_generic 1-3:1.0: generic converter detected
[72751.108600] usb 1-3: generic converter now attached to ttyUSB0
[72751.108751] usbserial_generic 1-3:1.1: generic converter detected
[72751.108917] usb 1-3: generic converter now attached to ttyUSB1
[72751.113917] scsi1228 : usb-storage 1-3:1.2
[72751.114253] usbserial_generic 1-3:1.3: generic converter detected
[72751.114438] usb 1-3: generic converter now attached to ttyUSB2
[72751.357682] usb 1-3: USB disconnect, address 63
[72751.357904] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72751.357914] usbserial_generic 1-3:1.0: device disconnected
[72751.358008] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72751.358017] usbserial_generic 1-3:1.1: device disconnected
[72751.360207] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72751.360217] usbserial_generic 1-3:1.3: device disconnected
[72751.628052] usb 1-3: new high speed USB device using ehci_hcd and address 64
[72751.773330] usbserial_generic 1-3:1.0: generic converter detected
[72751.773428] usb 1-3: generic converter now attached to ttyUSB0
[72751.773484] usbserial_generic 1-3:1.1: generic converter detected
[72751.773543] usb 1-3: generic converter now attached to ttyUSB1
[72751.801680] scsi1229 : usb-storage 1-3:1.2
[72751.808847] usbserial_generic 1-3:1.3: generic converter detected
[72751.808954] usb 1-3: generic converter now attached to ttyUSB2
[72752.107403] usb 1-3: USB disconnect, address 64
[72752.108413] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72752.108439] usbserial_generic 1-3:1.0: device disconnected
[72752.108672] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72752.108697] usbserial_generic 1-3:1.1: device disconnected
[72752.109295] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72752.109319] usbserial_generic 1-3:1.3: device disconnected
[72752.381122] usb 1-3: new high speed USB device using ehci_hcd and address 65
[72752.526693] usbserial_generic 1-3:1.0: generic converter detected
[72752.526789] usb 1-3: generic converter now attached to ttyUSB0
[72752.526845] usbserial_generic 1-3:1.1: generic converter detected
[72752.526902] usb 1-3: generic converter now attached to ttyUSB1
[72752.529283] scsi1230 : usb-storage 1-3:1.2
[72752.541523] usbserial_generic 1-3:1.3: generic converter detected
[72752.541606] usb 1-3: generic converter now attached to ttyUSB2
[72752.638445] usb 1-3: USB disconnect, address 65
[72752.638818] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72752.638828] usbserial_generic 1-3:1.0: device disconnected
[72752.638927] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72752.638936] usbserial_generic 1-3:1.1: device disconnected
[72752.642711] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72752.642723] usbserial_generic 1-3:1.3: device disconnected
[72752.881118] usb 1-3: new high speed USB device using ehci_hcd and address 66
[72753.019027] usbserial_generic 1-3:1.0: generic converter detected
[72753.019205] usb 1-3: generic converter now attached to ttyUSB0
[72753.019355] usbserial_generic 1-3:1.1: generic converter detected
[72753.019500] usb 1-3: generic converter now attached to ttyUSB1
[72753.020143] scsi1231 : usb-storage 1-3:1.2
[72753.022068] usbserial_generic 1-3:1.3: generic converter detected
[72753.022227] usb 1-3: generic converter now attached to ttyUSB2
[72753.948351] usb 1-3: USB disconnect, address 66
[72753.948706] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72753.948731] usbserial_generic 1-3:1.0: device disconnected
[72753.948968] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72753.948991] usbserial_generic 1-3:1.1: device disconnected
[72753.955889] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72753.955914] usbserial_generic 1-3:1.3: device disconnected
[72754.192074] usb 1-3: new high speed USB device using ehci_hcd and address 67
[72754.331903] usbserial_generic 1-3:1.0: generic converter detected
[72754.332113] usb 1-3: generic converter now attached to ttyUSB0
[72754.332265] usbserial_generic 1-3:1.1: generic converter detected
[72754.332410] usb 1-3: generic converter now attached to ttyUSB1
[72754.335575] scsi1232 : usb-storage 1-3:1.2
[72754.336063] usbserial_generic 1-3:1.3: generic converter detected
[72754.336229] usb 1-3: generic converter now attached to ttyUSB2
[72754.486164] usb 1-3: USB disconnect, address 67
[72754.486704] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72754.486731] usbserial_generic 1-3:1.0: device disconnected
[72754.486969] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72754.486991] usbserial_generic 1-3:1.1: device disconnected
[72754.487512] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72754.487535] usbserial_generic 1-3:1.3: device disconnected
[72754.756051] usb 1-3: new high speed USB device using ehci_hcd and address 68
[72754.897635] usbserial_generic 1-3:1.0: generic converter detected
[72754.897816] usb 1-3: generic converter now attached to ttyUSB0
[72754.897964] usbserial_generic 1-3:1.1: generic converter detected
[72754.898110] usb 1-3: generic converter now attached to ttyUSB1
[72754.898733] scsi1233 : usb-storage 1-3:1.2
[72754.899163] usbserial_generic 1-3:1.3: generic converter detected
[72754.899317] usb 1-3: generic converter now attached to ttyUSB2
[72754.989963] usb 1-3: USB disconnect, address 68
[72754.990468] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72754.990494] usbserial_generic 1-3:1.0: device disconnected
[72754.990735] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72754.990759] usbserial_generic 1-3:1.1: device disconnected
[72754.991408] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72754.991432] usbserial_generic 1-3:1.3: device disconnected
[72755.260138] usb 1-3: new high speed USB device using ehci_hcd and address 69
[72755.403126] usbserial_generic 1-3:1.0: generic converter detected
[72755.403297] usb 1-3: generic converter now attached to ttyUSB0
[72755.403453] usbserial_generic 1-3:1.1: generic converter detected
[72755.403598] usb 1-3: generic converter now attached to ttyUSB1
[72755.404248] scsi1234 : usb-storage 1-3:1.2
[72755.404668] usbserial_generic 1-3:1.3: generic converter detected
[72755.404819] usb 1-3: generic converter now attached to ttyUSB2
[72755.704837] usb 1-3: USB disconnect, address 69
[72755.705331] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72755.705356] usbserial_generic 1-3:1.0: device disconnected
[72755.705586] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72755.705610] usbserial_generic 1-3:1.1: device disconnected
[72755.706204] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72755.706228] usbserial_generic 1-3:1.3: device disconnected
[72755.976101] usb 1-3: new high speed USB device using ehci_hcd and address 70
[72756.116768] usbserial_generic 1-3:1.0: generic converter detected
[72756.116943] usb 1-3: generic converter now attached to ttyUSB0
[72756.117124] usbserial_generic 1-3:1.1: generic converter detected
[72756.117273] usb 1-3: generic converter now attached to ttyUSB1
[72756.118270] scsi1235 : usb-storage 1-3:1.2
[72756.118712] usbserial_generic 1-3:1.3: generic converter detected
[72756.118875] usb 1-3: generic converter now attached to ttyUSB2
[72756.742061] usb 1-3: USB disconnect, address 70
[72756.742432] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72756.742458] usbserial_generic 1-3:1.0: device disconnected
[72756.742694] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72756.742717] usbserial_generic 1-3:1.1: device disconnected
[72756.743239] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72756.743262] usbserial_generic 1-3:1.3: device disconnected
[72757.013179] usb 1-3: new high speed USB device using ehci_hcd and address 71
[72757.151738] usbserial_generic 1-3:1.0: generic converter detected
[72757.151928] usb 1-3: generic converter now attached to ttyUSB0
[72757.152113] usbserial_generic 1-3:1.1: generic converter detected
[72757.152268] usb 1-3: generic converter now attached to ttyUSB1
[72757.153816] scsi1236 : usb-storage 1-3:1.2
[72757.162312] usbserial_generic 1-3:1.3: generic converter detected
[72757.162398] usb 1-3: generic converter now attached to ttyUSB2
[72757.278450] usb 1-3: USB disconnect, address 71
[72757.280424] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72757.280451] usbserial_generic 1-3:1.0: device disconnected
[72757.280676] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72757.280699] usbserial_generic 1-3:1.1: device disconnected
[72757.284846] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72757.284854] usbserial_generic 1-3:1.3: device disconnected
[72757.524088] usb 1-3: new high speed USB device using ehci_hcd and address 72
[72757.667860] usbserial_generic 1-3:1.0: generic converter detected
[72757.668070] usb 1-3: generic converter now attached to ttyUSB0
[72757.668222] usbserial_generic 1-3:1.1: generic converter detected
[72757.668370] usb 1-3: generic converter now attached to ttyUSB1
[72757.670020] scsi1237 : usb-storage 1-3:1.2
[72757.670465] usbserial_generic 1-3:1.3: generic converter detected
[72757.670630] usb 1-3: generic converter now attached to ttyUSB2
[72757.798544] usb 1-3: USB disconnect, address 72
[72757.804701] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72757.804727] usbserial_generic 1-3:1.0: device disconnected
[72757.804952] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72757.804976] usbserial_generic 1-3:1.1: device disconnected
[72757.811286] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72757.811310] usbserial_generic 1-3:1.3: device disconnected
[72758.048085] usb 1-3: new high speed USB device using ehci_hcd and address 73
[72758.192885] usbserial_generic 1-3:1.0: generic converter detected
[72758.193070] usb 1-3: generic converter now attached to ttyUSB0
[72758.193222] usbserial_generic 1-3:1.1: generic converter detected
[72758.193365] usb 1-3: generic converter now attached to ttyUSB1
[72758.193999] scsi1238 : usb-storage 1-3:1.2
[72758.195801] usbserial_generic 1-3:1.3: generic converter detected
[72758.195959] usb 1-3: generic converter now attached to ttyUSB2
[72758.684414] usb 1-3: USB disconnect, address 73
[72758.684940] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72758.684967] usbserial_generic 1-3:1.0: device disconnected
[72758.685196] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72758.685222] usbserial_generic 1-3:1.1: device disconnected
[72758.685743] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72758.685767] usbserial_generic 1-3:1.3: device disconnected
[72758.957114] usb 1-3: new high speed USB device using ehci_hcd and address 74
[72759.095909] usbserial_generic 1-3:1.0: generic converter detected
[72759.095991] usb 1-3: generic converter now attached to ttyUSB0
[72759.096071] usbserial_generic 1-3:1.1: generic converter detected
[72759.096130] usb 1-3: generic converter now attached to ttyUSB1
[72759.119161] scsi1239 : usb-storage 1-3:1.2
[72759.120922] usbserial_generic 1-3:1.3: generic converter detected
[72759.121033] usb 1-3: generic converter now attached to ttyUSB2
[72759.303948] usb 1-3: USB disconnect, address 74
[72759.304319] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72759.304345] usbserial_generic 1-3:1.0: device disconnected
[72759.304577] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72759.304600] usbserial_generic 1-3:1.1: device disconnected
[72759.312813] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72759.312823] usbserial_generic 1-3:1.3: device disconnected
[72759.552159] usb 1-3: new high speed USB device using ehci_hcd and address 75
[72759.690625] usbserial_generic 1-3:1.0: generic converter detected
[72759.690806] usb 1-3: generic converter now attached to ttyUSB0
[72759.690957] usbserial_generic 1-3:1.1: generic converter detected
[72759.691102] usb 1-3: generic converter now attached to ttyUSB1
[72759.691859] scsi1240 : usb-storage 1-3:1.2
[72759.692294] usbserial_generic 1-3:1.3: generic converter detected
[72759.692447] usb 1-3: generic converter now attached to ttyUSB2
[72760.050316] usb 1-3: USB disconnect, address 75
[72760.050682] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72760.050714] usbserial_generic 1-3:1.0: device disconnected
[72760.050965] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72760.050988] usbserial_generic 1-3:1.1: device disconnected
[72760.051515] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72760.051539] usbserial_generic 1-3:1.3: device disconnected
[72760.324082] usb 1-3: new high speed USB device using ehci_hcd and address 76
[72760.465123] usbserial_generic 1-3:1.0: generic converter detected
[72760.465313] usb 1-3: generic converter now attached to ttyUSB0
[72760.465470] usbserial_generic 1-3:1.1: generic converter detected
[72760.465625] usb 1-3: generic converter now attached to ttyUSB1
[72760.465984] scsi1241 : usb-storage 1-3:1.2
[72760.466416] usbserial_generic 1-3:1.3: generic converter detected
[72760.466569] usb 1-3: generic converter now attached to ttyUSB2
[72761.335158] usb 1-3: USB disconnect, address 76
[72761.335520] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72761.335530] usbserial_generic 1-3:1.0: device disconnected
[72761.335626] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72761.335635] usbserial_generic 1-3:1.1: device disconnected
[72761.335845] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72761.335854] usbserial_generic 1-3:1.3: device disconnected
[72761.605123] usb 1-3: new high speed USB device using ehci_hcd and address 77
[72761.744886] usbserial_generic 1-3:1.0: generic converter detected
[72761.745087] usb 1-3: generic converter now attached to ttyUSB0
[72761.745245] usbserial_generic 1-3:1.1: generic converter detected
[72761.745405] usb 1-3: generic converter now attached to ttyUSB1
[72761.754795] scsi1242 : usb-storage 1-3:1.2
[72761.757602] usbserial_generic 1-3:1.3: generic converter detected
[72761.757797] usb 1-3: generic converter now attached to ttyUSB2
[72762.042440] usb 1-3: USB disconnect, address 77
[72762.043047] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72762.043073] usbserial_generic 1-3:1.0: device disconnected
[72762.043318] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72762.043340] usbserial_generic 1-3:1.1: device disconnected
[72762.043867] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72762.043890] usbserial_generic 1-3:1.3: device disconnected
[72762.317085] usb 1-3: new high speed USB device using ehci_hcd and address 78
[72762.454845] usbserial_generic 1-3:1.0: generic converter detected
[72762.455036] usb 1-3: generic converter now attached to ttyUSB0
[72762.455197] usbserial_generic 1-3:1.1: generic converter detected
[72762.455352] usb 1-3: generic converter now attached to ttyUSB1
[72762.457078] scsi1243 : usb-storage 1-3:1.2
[72762.457719] usbserial_generic 1-3:1.3: generic converter detected
[72762.457891] usb 1-3: generic converter now attached to ttyUSB2
[72762.547926] usb 1-3: USB disconnect, address 78
[72762.548335] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72762.548361] usbserial_generic 1-3:1.0: device disconnected
[72762.548589] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72762.548613] usbserial_generic 1-3:1.1: device disconnected
[72762.553607] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72762.553632] usbserial_generic 1-3:1.3: device disconnected
[72762.794996] usb 1-3: new high speed USB device using ehci_hcd and address 79
[72762.930472] usbserial_generic 1-3:1.0: generic converter detected
[72762.930668] usb 1-3: generic converter now attached to ttyUSB0
[72762.930825] usbserial_generic 1-3:1.1: generic converter detected
[72762.930985] usb 1-3: generic converter now attached to ttyUSB1
[72762.931274] scsi1244 : usb-storage 1-3:1.2
[72762.931619] usbserial_generic 1-3:1.3: generic converter detected
[72762.931787] usb 1-3: generic converter now attached to ttyUSB2
[72763.135424] usb 1-3: USB disconnect, address 79
[72763.135818] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72763.135846] usbserial_generic 1-3:1.0: device disconnected
[72763.136108] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72763.136131] usbserial_generic 1-3:1.1: device disconnected
[72763.142448] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72763.142473] usbserial_generic 1-3:1.3: device disconnected
[72763.380052] usb 1-3: new high speed USB device using ehci_hcd and address 80
[72763.522363] usbserial_generic 1-3:1.0: generic converter detected
[72763.522546] usb 1-3: generic converter now attached to ttyUSB0
[72763.522694] usbserial_generic 1-3:1.1: generic converter detected
[72763.522845] usb 1-3: generic converter now attached to ttyUSB1
[72763.523498] scsi1245 : usb-storage 1-3:1.2
[72763.523926] usbserial_generic 1-3:1.3: generic converter detected
[72763.524131] usb 1-3: generic converter now attached to ttyUSB2
[72763.738179] usb 1-3: USB disconnect, address 80
[72763.738659] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72763.738686] usbserial_generic 1-3:1.0: device disconnected
[72763.738925] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72763.738948] usbserial_generic 1-3:1.1: device disconnected
[72763.739464] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72763.739488] usbserial_generic 1-3:1.3: device disconnected
[72764.009118] usb 1-3: new high speed USB device using ehci_hcd and address 81
[72764.147601] usbserial_generic 1-3:1.0: generic converter detected
[72764.147800] usb 1-3: generic converter now attached to ttyUSB0
[72764.147955] usbserial_generic 1-3:1.1: generic converter detected
[72764.148108] usb 1-3: generic converter now attached to ttyUSB1
[72764.149130] scsi1246 : usb-storage 1-3:1.2
[72764.149636] usbserial_generic 1-3:1.3: generic converter detected
[72764.149708] usb 1-3: generic converter now attached to ttyUSB2
[72764.841037] usb 1-3: USB disconnect, address 81
[72764.841507] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72764.841533] usbserial_generic 1-3:1.0: device disconnected
[72764.841763] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72764.841787] usbserial_generic 1-3:1.1: device disconnected
[72764.848411] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72764.848419] usbserial_generic 1-3:1.3: device disconnected
[72765.088092] usb 1-3: new high speed USB device using ehci_hcd and address 82
[72765.227466] usbserial_generic 1-3:1.0: generic converter detected
[72765.227650] usb 1-3: generic converter now attached to ttyUSB0
[72765.227805] usbserial_generic 1-3:1.1: generic converter detected
[72765.227953] usb 1-3: generic converter now attached to ttyUSB1
[72765.228767] scsi1247 : usb-storage 1-3:1.2
[72765.229198] usbserial_generic 1-3:1.3: generic converter detected
[72765.229360] usb 1-3: generic converter now attached to ttyUSB2
[72765.520290] usb 1-3: USB disconnect, address 82
[72765.520662] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72765.520688] usbserial_generic 1-3:1.0: device disconnected
[72765.520917] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72765.520940] usbserial_generic 1-3:1.1: device disconnected
[72765.527543] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72765.527568] usbserial_generic 1-3:1.3: device disconnected
[72765.765116] usb 1-3: new high speed USB device using ehci_hcd and address 83
[72765.903607] usbserial_generic 1-3:1.0: generic converter detected
[72765.903818] usb 1-3: generic converter now attached to ttyUSB0
[72765.903970] usbserial_generic 1-3:1.1: generic converter detected
[72765.904124] usb 1-3: generic converter now attached to ttyUSB1
[72765.905154] scsi1248 : usb-storage 1-3:1.2
[72765.905592] usbserial_generic 1-3:1.3: generic converter detected
[72765.905748] usb 1-3: generic converter now attached to ttyUSB2
[72766.007877] usb 1-3: USB disconnect, address 83
[72766.008179] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72766.008193] usbserial_generic 1-3:1.0: device disconnected
[72766.008314] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72766.008326] usbserial_generic 1-3:1.1: device disconnected
[72766.012781] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72766.012805] usbserial_generic 1-3:1.3: device disconnected
[72766.252078] usb 1-3: new high speed USB device using ehci_hcd and address 84
[72766.393762] usbserial_generic 1-3:1.0: generic converter detected
[72766.393948] usb 1-3: generic converter now attached to ttyUSB0
[72766.394095] usbserial_generic 1-3:1.1: generic converter detected
[72766.394255] usb 1-3: generic converter now attached to ttyUSB1
[72766.395352] scsi1249 : usb-storage 1-3:1.2
[72766.395798] usbserial_generic 1-3:1.3: generic converter detected
[72766.395969] usb 1-3: generic converter now attached to ttyUSB2
[72767.281882] usb 1-3: USB disconnect, address 84
[72767.282392] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72767.282406] usbserial_generic 1-3:1.0: device disconnected
[72767.282530] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72767.282542] usbserial_generic 1-3:1.1: device disconnected
[72767.282890] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72767.282903] usbserial_generic 1-3:1.3: device disconnected
[72767.553092] usb 1-3: new high speed USB device using ehci_hcd and address 85
[72767.693214] usbserial_generic 1-3:1.0: generic converter detected
[72767.693389] usb 1-3: generic converter now attached to ttyUSB0
[72767.693543] usbserial_generic 1-3:1.1: generic converter detected
[72767.693689] usb 1-3: generic converter now attached to ttyUSB1
[72767.698311] scsi1250 : usb-storage 1-3:1.2
[72767.698806] usbserial_generic 1-3:1.3: generic converter detected
[72767.698998] usb 1-3: generic converter now attached to ttyUSB2
[72768.088406] usb 1-3: USB disconnect, address 85
[72768.088892] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72768.088917] usbserial_generic 1-3:1.0: device disconnected
[72768.089150] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72768.089175] usbserial_generic 1-3:1.1: device disconnected
[72768.093321] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72768.093345] usbserial_generic 1-3:1.3: device disconnected
[72768.332079] usb 1-3: new high speed USB device using ehci_hcd and address 86
[72768.470694] usbserial_generic 1-3:1.0: generic converter detected
[72768.470892] usb 1-3: generic converter now attached to ttyUSB0
[72768.471060] usbserial_generic 1-3:1.1: generic converter detected
[72768.471214] usb 1-3: generic converter now attached to ttyUSB1
[72768.473610] scsi1251 : usb-storage 1-3:1.2
[72768.474108] usbserial_generic 1-3:1.3: generic converter detected
[72768.474298] usb 1-3: generic converter now attached to ttyUSB2
[72768.834905] usb 1-3: USB disconnect, address 86
[72768.835240] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72768.835266] usbserial_generic 1-3:1.0: device disconnected
[72768.835509] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72768.835533] usbserial_generic 1-3:1.1: device disconnected
[72768.836094] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72768.836118] usbserial_generic 1-3:1.3: device disconnected
[72769.109055] usb 1-3: new high speed USB device using ehci_hcd and address 87
[72769.250238] usbserial_generic 1-3:1.0: generic converter detected
[72769.250319] usb 1-3: generic converter now attached to ttyUSB0
[72769.250373] usbserial_generic 1-3:1.1: generic converter detected
[72769.250427] usb 1-3: generic converter now attached to ttyUSB1
[72769.255952] scsi1252 : usb-storage 1-3:1.2
[72769.267915] usbserial_generic 1-3:1.3: generic converter detected
[72769.267997] usb 1-3: generic converter now attached to ttyUSB2
[72769.491959] usb 1-3: USB disconnect, address 87
[72769.492183] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72769.492192] usbserial_generic 1-3:1.0: device disconnected
[72769.492283] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72769.492293] usbserial_generic 1-3:1.1: device disconnected
[72769.494412] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72769.494421] usbserial_generic 1-3:1.3: device disconnected
[72769.765030] usb 1-3: new high speed USB device using ehci_hcd and address 88
[72769.905484] usbserial_generic 1-3:1.0: generic converter detected
[72769.905568] usb 1-3: generic converter now attached to ttyUSB0
[72769.905623] usbserial_generic 1-3:1.1: generic converter detected
[72769.905683] usb 1-3: generic converter now attached to ttyUSB1
[72769.942690] scsi1253 : usb-storage 1-3:1.2
[72769.954364] usbserial_generic 1-3:1.3: generic converter detected
[72769.954459] usb 1-3: generic converter now attached to ttyUSB2
[72770.169744] usb 1-3: USB disconnect, address 88
[72770.170088] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72770.170098] usbserial_generic 1-3:1.0: device disconnected
[72770.170200] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72770.170209] usbserial_generic 1-3:1.1: device disconnected
[72770.170417] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72770.170426] usbserial_generic 1-3:1.3: device disconnected
[72770.440081] usb 1-3: new high speed USB device using ehci_hcd and address 89
[72770.580443] usbserial_generic 1-3:1.0: generic converter detected
[72770.580631] usb 1-3: generic converter now attached to ttyUSB0
[72770.580789] usbserial_generic 1-3:1.1: generic converter detected
[72770.580938] usb 1-3: generic converter now attached to ttyUSB1
[72770.583479] scsi1254 : usb-storage 1-3:1.2
[72770.583953] usbserial_generic 1-3:1.3: generic converter detected
[72770.584127] usb 1-3: generic converter now attached to ttyUSB2
[72770.641514] usb 1-3: USB disconnect, address 89
[72770.642135] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72770.642161] usbserial_generic 1-3:1.0: device disconnected
[72770.642388] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72770.642411] usbserial_generic 1-3:1.1: device disconnected
[72770.647390] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72770.647413] usbserial_generic 1-3:1.3: device disconnected
[72770.885068] usb 1-3: new high speed USB device using ehci_hcd and address 90
[72771.022578] usbserial_generic 1-3:1.0: generic converter detected
[72771.022767] usb 1-3: generic converter now attached to ttyUSB0
[72771.022921] usbserial_generic 1-3:1.1: generic converter detected
[72771.023071] usb 1-3: generic converter now attached to ttyUSB1
[72771.023852] scsi1255 : usb-storage 1-3:1.2
[72771.024289] usbserial_generic 1-3:1.3: generic converter detected
[72771.024454] usb 1-3: generic converter now attached to ttyUSB2
[72771.276005] usb 1-3: USB disconnect, address 90
[72771.276382] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72771.276407] usbserial_generic 1-3:1.0: device disconnected
[72771.276650] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72771.276674] usbserial_generic 1-3:1.1: device disconnected
[72771.282361] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72771.282385] usbserial_generic 1-3:1.3: device disconnected
[72771.520087] usb 1-3: new high speed USB device using ehci_hcd and address 91
[72771.658444] usbserial_generic 1-3:1.0: generic converter detected
[72771.658631] usb 1-3: generic converter now attached to ttyUSB0
[72771.658785] usbserial_generic 1-3:1.1: generic converter detected
[72771.658934] usb 1-3: generic converter now attached to ttyUSB1
[72771.659562] scsi1256 : usb-storage 1-3:1.2
[72771.669523] usbserial_generic 1-3:1.3: generic converter detected
[72771.669617] usb 1-3: generic converter now attached to ttyUSB2
[72771.929827] usb 1-3: USB disconnect, address 91
[72771.930071] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72771.930081] usbserial_generic 1-3:1.0: device disconnected
[72771.930171] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72771.930181] usbserial_generic 1-3:1.1: device disconnected
[72771.931500] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72771.931508] usbserial_generic 1-3:1.3: device disconnected
[72772.200100] usb 1-3: new high speed USB device using ehci_hcd and address 92
[72772.340817] usbserial_generic 1-3:1.0: generic converter detected
[72772.341022] usb 1-3: generic converter now attached to ttyUSB0
[72772.341171] usbserial_generic 1-3:1.1: generic converter detected
[72772.341319] usb 1-3: generic converter now attached to ttyUSB1
[72772.357335] scsi1257 : usb-storage 1-3:1.2
[72772.359807] usbserial_generic 1-3:1.3: generic converter detected
[72772.359895] usb 1-3: generic converter now attached to ttyUSB2
[72772.655509] usb 1-3: USB disconnect, address 92
[72772.655995] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72772.656049] usbserial_generic 1-3:1.0: device disconnected
[72772.656284] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72772.656310] usbserial_generic 1-3:1.1: device disconnected
[72772.659037] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72772.659062] usbserial_generic 1-3:1.3: device disconnected
[72772.929083] usb 1-3: new high speed USB device using ehci_hcd and address 93
[72773.072768] usbserial_generic 1-3:1.0: generic converter detected
[72773.072973] usb 1-3: generic converter now attached to ttyUSB0
[72773.073122] usbserial_generic 1-3:1.1: generic converter detected
[72773.073277] usb 1-3: generic converter now attached to ttyUSB1
[72773.077631] scsi1258 : usb-storage 1-3:1.2
[72773.079035] usbserial_generic 1-3:1.3: generic converter detected
[72773.079118] usb 1-3: generic converter now attached to ttyUSB2
[72773.137131] usb 1-3: USB disconnect, address 93
[72773.137642] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72773.137667] usbserial_generic 1-3:1.0: device disconnected
[72773.137899] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72773.137923] usbserial_generic 1-3:1.1: device disconnected
[72773.144488] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72773.144513] usbserial_generic 1-3:1.3: device disconnected
[72773.384139] usb 1-3: new high speed USB device using ehci_hcd and address 94
[72773.523920] usbserial_generic 1-3:1.0: generic converter detected
[72773.524093] usb 1-3: generic converter now attached to ttyUSB0
[72773.524242] usbserial_generic 1-3:1.1: generic converter detected
[72773.524389] usb 1-3: generic converter now attached to ttyUSB1
[72773.525035] scsi1259 : usb-storage 1-3:1.2
[72773.525464] usbserial_generic 1-3:1.3: generic converter detected
[72773.525619] usb 1-3: generic converter now attached to ttyUSB2
[72773.736876] usb 1-3: USB disconnect, address 94
[72773.737223] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72773.737249] usbserial_generic 1-3:1.0: device disconnected
[72773.737492] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72773.737516] usbserial_generic 1-3:1.1: device disconnected
[72773.738049] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72773.738072] usbserial_generic 1-3:1.3: device disconnected
[72774.008078] usb 1-3: new high speed USB device using ehci_hcd and address 95
[72774.146680] usbserial_generic 1-3:1.0: generic converter detected
[72774.146864] usb 1-3: generic converter now attached to ttyUSB0
[72774.147013] usbserial_generic 1-3:1.1: generic converter detected
[72774.147161] usb 1-3: generic converter now attached to ttyUSB1
[72774.147973] scsi1260 : usb-storage 1-3:1.2
[72774.149287] usbserial_generic 1-3:1.3: generic converter detected
[72774.149456] usb 1-3: generic converter now attached to ttyUSB2
[72774.387130] usb 1-3: USB disconnect, address 95
[72774.387608] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72774.387633] usbserial_generic 1-3:1.0: device disconnected
[72774.387869] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72774.387894] usbserial_generic 1-3:1.1: device disconnected
[72774.392654] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72774.392678] usbserial_generic 1-3:1.3: device disconnected
[72774.633118] usb 1-3: new high speed USB device using ehci_hcd and address 96
[72774.771644] usbserial_generic 1-3:1.0: generic converter detected
[72774.771727] usb 1-3: generic converter now attached to ttyUSB0
[72774.771781] usbserial_generic 1-3:1.1: generic converter detected
[72774.771835] usb 1-3: generic converter now attached to ttyUSB1
[72774.791889] scsi1261 : usb-storage 1-3:1.2
[72774.793083] usbserial_generic 1-3:1.3: generic converter detected
[72774.793168] usb 1-3: generic converter now attached to ttyUSB2
[72775.088617] usb 1-3: USB disconnect, address 96
[72775.092459] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72775.092513] usbserial_generic 1-3:1.0: device disconnected
[72775.092745] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72775.092769] usbserial_generic 1-3:1.1: device disconnected
[72775.098524] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72775.098548] usbserial_generic 1-3:1.3: device disconnected
[72775.336043] usb 1-3: new high speed USB device using ehci_hcd and address 97
[72775.474681] usbserial_generic 1-3:1.0: generic converter detected
[72775.474865] usb 1-3: generic converter now attached to ttyUSB0
[72775.475014] usbserial_generic 1-3:1.1: generic converter detected
[72775.475161] usb 1-3: generic converter now attached to ttyUSB1
[72775.475915] scsi1262 : usb-storage 1-3:1.2
[72775.476341] usbserial_generic 1-3:1.3: generic converter detected
[72775.476494] usb 1-3: generic converter now attached to ttyUSB2
[72775.843894] usb 1-3: USB disconnect, address 97
[72775.844419] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72775.844446] usbserial_generic 1-3:1.0: device disconnected
[72775.844677] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72775.844700] usbserial_generic 1-3:1.1: device disconnected
[72775.847189] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72775.847214] usbserial_generic 1-3:1.3: device disconnected
[72776.116051] usb 1-3: new high speed USB device using ehci_hcd and address 98
[72776.257291] usbserial_generic 1-3:1.0: generic converter detected
[72776.257489] usb 1-3: generic converter now attached to ttyUSB0
[72776.257645] usbserial_generic 1-3:1.1: generic converter detected
[72776.257807] usb 1-3: generic converter now attached to ttyUSB1
[72776.258307] scsi1263 : usb-storage 1-3:1.2
[72776.258622] usbserial_generic 1-3:1.3: generic converter detected
[72776.258779] usb 1-3: generic converter now attached to ttyUSB2
[72776.570753] usb 1-3: USB disconnect, address 98
[72776.571490] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[72776.571517] usbserial_generic 1-3:1.0: device disconnected
[72776.571753] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[72776.571777] usbserial_generic 1-3:1.1: device disconnected
[72776.573607] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[72776.573631] usbserial_generic 1-3:1.3: device disconnected
[72776.844094] usb 1-3: new high speed USB device using ehci_hcd and address 99
[72776.913426] hub 1-0:1.0: unable to enumerate USB device on port 3
[72777.180083] usb 4-1: new full speed USB device using uhci_hcd and address 39
[72777.324091] usb 4-1: not running at top speed; connect to a high speed hub
[72777.359307] usbserial_generic 4-1:1.0: generic converter detected
[72777.359504] usb 4-1: generic converter now attached to ttyUSB0
[72777.359671] usbserial_generic 4-1:1.1: generic converter detected
[72777.359817] usb 4-1: generic converter now attached to ttyUSB1
[72777.362182] scsi1264 : usb-storage 4-1:1.2
[72777.363877] usbserial_generic 4-1:1.3: generic converter detected
[72777.363960] usb 4-1: generic converter now attached to ttyUSB2
[72778.368093] scsi 1264:0:0:0: Direct-Access USBModem MMC Storage 2.31 PQ: 0 ANSI: 2
[72778.368653] sd 1264:0:0:0: Attached scsi generic sg2 type 0
[72778.387077] sd 1264:0:0:0: [sdb] Attached SCSI removable disk
[73545.561151] usb 4-1: USB disconnect, address 39
[73545.561455] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[73545.561490] usbserial_generic 4-1:1.0: device disconnected
[73545.561757] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[73545.561782] usbserial_generic 4-1:1.1: device disconnected
[73545.573381] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[73545.573414] usbserial_generic 4-1:1.3: device disconnected
[73563.925121] usb 1-3: new high speed USB device using ehci_hcd and address 100
[73564.062673] scsi1265 : usb-storage 1-3:1.0
[73564.471856] usb 1-3: USB disconnect, address 100
[73564.744094] usb 1-3: new high speed USB device using ehci_hcd and address 101
[73564.886813] scsi1266 : usb-storage 1-3:1.0
[73566.021621] usb 1-3: USB disconnect, address 101
[73566.296053] usb 1-3: new high speed USB device using ehci_hcd and address 102
[73566.451391] scsi1267 : usb-storage 1-3:1.0
[73567.194409] usb 1-3: USB disconnect, address 102
[73567.564082] usb 1-3: new high speed USB device using ehci_hcd and address 103
[73567.705125] usbserial_generic 1-3:1.0: generic converter detected
[73567.705225] usb 1-3: generic converter now attached to ttyUSB0
[73567.705298] usbserial_generic 1-3:1.1: generic converter detected
[73567.705382] usb 1-3: generic converter now attached to ttyUSB1
[73567.709245] scsi1268 : usb-storage 1-3:1.2
[73567.711742] usbserial_generic 1-3:1.3: generic converter detected
[73567.711832] usb 1-3: generic converter now attached to ttyUSB2
[73567.783347] usb 1-3: USB disconnect, address 103
[73567.783852] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[73567.783877] usbserial_generic 1-3:1.0: device disconnected
[73567.784134] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[73567.784158] usbserial_generic 1-3:1.1: device disconnected
[73567.785054] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[73567.785078] usbserial_generic 1-3:1.3: device disconnected
[73568.056106] usb 1-3: new high speed USB device using ehci_hcd and address 104
[73568.195221] usbserial_generic 1-3:1.0: generic converter detected
[73568.195426] usb 1-3: generic converter now attached to ttyUSB0
[73568.195581] usbserial_generic 1-3:1.1: generic converter detected
[73568.195738] usb 1-3: generic converter now attached to ttyUSB1
[73568.209320] scsi1269 : usb-storage 1-3:1.2
[73568.209527] usbserial_generic 1-3:1.3: generic converter detected
[73568.209613] usb 1-3: generic converter now attached to ttyUSB2
[73568.405797] usb 1-3: USB disconnect, address 104
[73568.406177] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[73568.406204] usbserial_generic 1-3:1.0: device disconnected
[73568.406449] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[73568.406472] usbserial_generic 1-3:1.1: device disconnected
[73568.407134] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[73568.407160] usbserial_generic 1-3:1.3: device disconnected
[73568.676098] usb 1-3: new high speed USB device using ehci_hcd and address 105
[73568.815570] usbserial_generic 1-3:1.0: generic converter detected
[73568.815771] usb 1-3: generic converter now attached to ttyUSB0
[73568.815921] usbserial_generic 1-3:1.1: generic converter detected
[73568.816076] usb 1-3: generic converter now attached to ttyUSB1
[73568.816913] scsi1270 : usb-storage 1-3:1.2
[73568.818829] usbserial_generic 1-3:1.3: generic converter detected
[73568.819002] usb 1-3: generic converter now attached to ttyUSB2
[73568.905669] usb 1-3: USB disconnect, address 105
[73568.906048] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[73568.906073] usbserial_generic 1-3:1.0: device disconnected
[73568.906304] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[73568.906328] usbserial_generic 1-3:1.1: device disconnected
[73568.912443] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[73568.912468] usbserial_generic 1-3:1.3: device disconnected
[73569.152098] usb 1-3: new high speed USB device using ehci_hcd and address 106
[73569.296473] usbserial_generic 1-3:1.0: generic converter detected
[73569.296671] usb 1-3: generic converter now attached to ttyUSB0
[73569.296832] usbserial_generic 1-3:1.1: generic converter detected
[73569.296979] usb 1-3: generic converter now attached to ttyUSB1
[73569.297660] scsi1271 : usb-storage 1-3:1.2
[73569.298339] usbserial_generic 1-3:1.3: generic converter detected
[73569.298497] usb 1-3: generic converter now attached to ttyUSB2
[73569.332802] usb 1-3: USB disconnect, address 106
[73569.333125] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[73569.333138] usbserial_generic 1-3:1.0: device disconnected
[73569.333238] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[73569.333246] usbserial_generic 1-3:1.1: device disconnected
[73569.333433] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[73569.333443] usbserial_generic 1-3:1.3: device disconnected
[73569.604139] usb 1-3: new high speed USB device using ehci_hcd and address 107
[73569.745172] usbserial_generic 1-3:1.0: generic converter detected
[73569.745356] usb 1-3: generic converter now attached to ttyUSB0
[73569.745507] usbserial_generic 1-3:1.1: generic converter detected
[73569.745657] usb 1-3: generic converter now attached to ttyUSB1
[73569.755951] scsi1272 : usb-storage 1-3:1.2
[73569.758757] usbserial_generic 1-3:1.3: generic converter detected
[73569.758847] usb 1-3: generic converter now attached to ttyUSB2
[73569.762284] usb 1-3: USB disconnect, address 107
[73569.762405] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[73569.762418] usbserial_generic 1-3:1.0: device disconnected
[73569.762496] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[73569.762506] usbserial_generic 1-3:1.1: device disconnected
[73569.762700] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[73569.762710] usbserial_generic 1-3:1.3: device disconnected
[73570.032630] usb 1-3: new high speed USB device using ehci_hcd and address 108
[73570.560067] usb 1-3: device not accepting address 108, error -71
[73570.672069] usb 1-3: new high speed USB device using ehci_hcd and address 109
[73570.811785] usbserial_generic 1-3:1.0: generic converter detected
[73570.811984] usb 1-3: generic converter now attached to ttyUSB0
[73570.812135] usbserial_generic 1-3:1.1: generic converter detected
[73570.812284] usb 1-3: generic converter now attached to ttyUSB1
[73570.814709] scsi1273 : usb-storage 1-3:1.2
[73570.815153] usbserial_generic 1-3:1.3: generic converter detected
[73570.815325] usb 1-3: generic converter now attached to ttyUSB2
[73570.944429] usb 1-3: USB disconnect, address 109
[73570.948429] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[73570.948456] usbserial_generic 1-3:1.0: device disconnected
[73570.948692] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[73570.948716] usbserial_generic 1-3:1.1: device disconnected
[73570.949245] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[73570.949268] usbserial_generic 1-3:1.3: device disconnected
[73571.188085] usb 1-3: new high speed USB device using ehci_hcd and address 110
[73571.330687] usbserial_generic 1-3:1.0: generic converter detected
[73571.330866] usb 1-3: generic converter now attached to ttyUSB0
[73571.331017] usbserial_generic 1-3:1.1: generic converter detected
[73571.331164] usb 1-3: generic converter now attached to ttyUSB1
[73571.332141] scsi1274 : usb-storage 1-3:1.2
[73571.332581] usbserial_generic 1-3:1.3: generic converter detected
[73571.332745] usb 1-3: generic converter now attached to ttyUSB2
[73571.428043] usb 1-3: USB disconnect, address 110
[73571.428546] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[73571.428572] usbserial_generic 1-3:1.0: device disconnected
[73571.428810] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[73571.428834] usbserial_generic 1-3:1.1: device disconnected
[73571.433602] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[73571.433626] usbserial_generic 1-3:1.3: device disconnected
[73571.672080] usb 1-3: new high speed USB device using ehci_hcd and address 111
[73571.736388] hub 1-0:1.0: unable to enumerate USB device on port 3
[73572.129110] usb 4-1: new full speed USB device using uhci_hcd and address 40
[73572.267082] usb 4-1: not running at top speed; connect to a high speed hub
[73572.303264] usbserial_generic 4-1:1.0: generic converter detected
[73572.303461] usb 4-1: generic converter now attached to ttyUSB0
[73572.303609] usbserial_generic 4-1:1.1: generic converter detected
[73572.303754] usb 4-1: generic converter now attached to ttyUSB1
[73572.304031] scsi1275 : usb-storage 4-1:1.2
[73572.314993] usbserial_generic 4-1:1.3: generic converter detected
[73572.315188] usb 4-1: generic converter now attached to ttyUSB2
[73573.317689] scsi 1275:0:0:0: Direct-Access USBModem MMC Storage 2.31 PQ: 0 ANSI: 2
[73573.319167] sd 1275:0:0:0: Attached scsi generic sg2 type 0
[73573.333606] sd 1275:0:0:0: [sdb] Attached SCSI removable disk
[74404.880154] usb 4-1: USB disconnect, address 40
[74404.880459] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[74404.880492] usbserial_generic 4-1:1.0: device disconnected
[74404.880712] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[74404.880745] usbserial_generic 4-1:1.1: device disconnected
[74404.890968] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[74404.890981] usbserial_generic 4-1:1.3: device disconnected
[74423.706514] PM: Syncing filesystems ... done.
[74423.722434] PM: Preparing system for mem sleep
[74423.722448] [ pm_notifier_block : 170 ] event :3
[74423.722449]
[74423.722451] Freezing user space processes ... (elapsed 0.01 seconds) done.
[74423.737127] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[74423.752101] PM: Entering mem sleep
[74423.752124] Suspending console(s) (use no_console_suspend to debug)
[74423.907076] PM: suspend of drv:psmouse dev:serio9 complete after 154.641 msecs
[74423.924295] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[74424.024417] ACPI handle has no context!
[74424.024646] iwl3945 0000:03:00.0: Master Disable Timed Out, 100 usec
[74424.025028] ata2: port disabled. ignoring.
[74424.025170] ata_piix 0000:00:1f.1: PCI INT C disabled
[74424.025232] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[74424.025256] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[74424.025280] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[74424.025304] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[74424.025319] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY
[74424.025912] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[74424.025946] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[74424.025975] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[74424.028585] e1000e 0000:00:19.0: PME# enabled
[74424.028593] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[74424.067236] sd 2:0:0:0: [sda] Stopping disk
[74424.132410] HDA Intel 0000:00:1b.0: PCI INT B disabled
[74424.148034] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 122.647 msecs
[74424.538991] PM: suspend of drv:sd dev:2:0:0:0 complete after 614.702 msecs
[74424.539004] PM: suspend of drv:scsi dev:target2:0:0 complete after 614.660 msecs
[74424.539014] PM: suspend of drv:scsi dev:host2 complete after 614.636 msecs
[74424.572034] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 547.107 msecs
[74425.352128] PM: suspend of drv:nvidia dev:0000:01:00.0 complete after 1327.253 msecs
[74425.352151] PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 1323.524 msecs
[74425.352167] PM: suspend of drv: dev:pci0000:00 complete after 1323.513 msecs
[74425.352182] PM: suspend of devices complete after 1599.765 msecs
[74425.352185] PM: suspend devices took 1.600 seconds
[74425.376075] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[74425.384066] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D3
[74425.392065] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[74425.416065] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[74425.444055] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D3
[74425.444252] PM: late suspend of devices complete after 92.062 msecs
[74425.484058] ACPI: Preparing to enter system sleep state S3
[74425.624084] PM: Saving platform NVS memory
[74425.628902] Disabling non-boot CPUs ...
[74425.736045] CPU 1 is now offline
[74425.736048] SMP alternatives: switching to UP code
[74425.741899] Extended CMOS year: 2000
[74425.741899] Back to C!
[74425.741899] PM: Restoring platform NVS memory
[74425.741899] Extended CMOS year: 2000
[74425.741899] Enabling non-boot CPUs ...
[74425.741899] SMP alternatives: switching to SMP code
[74425.747138] Booting Node 0 Processor 1 APIC 0x1
[74425.741574] Initializing CPU#1
[74425.892153] CPU1 is up
[74425.892831] ACPI: Waking up from system sleep state S3
[74426.233235] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[74426.233392] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[74426.277055] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[74426.285064] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[74426.285113] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[74426.293064] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[74426.301063] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[74426.301124] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[74426.309064] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[74426.317063] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[74426.317133] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[74426.317213] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[74426.317298] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x4040, writing 0x20004040)
[74426.317314] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[74426.317408] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[74426.317488] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[74426.317593] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[74426.325064] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[74426.333063] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[74426.333114] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[74426.341064] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[74426.349063] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[74426.349115] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[74426.357065] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[74426.365064] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[74426.365115] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[74426.373065] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[74426.381063] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[74426.381126] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[74426.389064] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[74426.397064] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[74426.397110] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007)
[74426.397255] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[74426.397309] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[74426.397442] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0)
[74426.397449] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007)
[74426.397671] iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[74426.412035] firewire_ohci 0000:15:00.1: BAR 0: set to [mem 0xf8101000-0xf81017ff] (PCI address [0xf8101000-0xf81017ff]
[74426.412086] firewire_ohci 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802000)
[74426.412098] firewire_ohci 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[74426.412667] PM: early resume of devices complete after 179.573 msecs
[74426.412792] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[74426.412798] e1000e 0000:00:19.0: PME# disabled
[74426.412909] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[74426.412927] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[74426.412937] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[74426.412969] usb usb3: root hub lost power or was reset
[74426.417044] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[74426.417055] HDA Intel 0000:00:1b.0: setting latency timer to 64
[74426.417128] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[74426.417203] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY
[74426.417258] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[74426.417271] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[74426.417299] usb usb6: root hub lost power or was reset
[74426.417403] pci 0000:00:1e.0: setting latency timer to 64
[74426.417423] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[74426.417430] ata_piix 0000:00:1f.1: setting latency timer to 64
[74426.417494] ata2: port disabled. ignoring.
[74426.417511] ahci 0000:00:1f.2: setting latency timer to 64
[74426.433022] sd 2:0:0:0: [sda] Starting disk
[74426.446319] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[74426.446557] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[74426.446564] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[74426.446575] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[74426.446633] usb usb4: root hub lost power or was reset
[74426.448309] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[74426.448617] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[74426.448626] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[74426.448637] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[74426.448903] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[74426.449179] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[74426.449185] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[74426.449196] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[74426.449250] usb usb5: root hub lost power or was reset
[74426.449539] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[74426.449789] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[74426.449795] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[74426.449806] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[74426.449860] usb usb7: root hub lost power or was reset
[74426.450123] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[74426.450392] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[74426.450402] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[74426.450412] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[74426.516097] firewire_core: skipped bus generations, destroying all nodes
[74426.582008] PM: resume of drv:usb dev:usb6 complete after 149.149 msecs
[74426.582487] PM: resume of drv:hub dev:6-0:1.0 complete after 149.609 msecs
[74426.588037] PM: resume of drv:usb dev:usb4 complete after 155.484 msecs
[74426.588047] PM: resume of drv:hub dev:4-0:1.0 complete after 155.340 msecs
[74426.598399] PM: resume of drv:usb dev:usb7 complete after 165.498 msecs
[74426.598562] PM: resume of drv:usb dev:usb2 complete after 166.229 msecs
[74426.598573] PM: resume of drv:hub dev:7-0:1.0 complete after 165.655 msecs
[74426.598579] PM: resume of drv:hub dev:2-0:1.0 complete after 166.190 msecs
[74426.617256] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[74426.617259] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[74426.618683] ata1.00: ACPI cmd e3/00:79:00:00:00:a0 (IDLE) succeeded
[74426.619528] ata1.00: ACPI cmd e3/00:01:00:00:00:a0 (IDLE) succeeded
[74426.640890] ata1.00: configured for UDMA/33
[74426.684089] PM: resume of drv:usb dev:usb3 complete after 251.618 msecs
[74426.684097] PM: resume of drv:hub dev:3-0:1.0 complete after 251.604 msecs
[74426.700084] PM: resume of drv:usb dev:usb5 complete after 267.320 msecs
[74426.700095] PM: resume of drv:usb dev:usb1 complete after 268.316 msecs
[74426.700104] PM: resume of drv:hub dev:5-0:1.0 complete after 267.260 msecs
[74426.700161] PM: resume of drv:hub dev:1-0:1.0 complete after 268.220 msecs
[74426.700171] PM: resume of drv: dev:ep_81 complete after 206.593 msecs
[74426.711078] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 298.295 msecs
[74426.960081] usb 5-1: reset low speed USB device using uhci_hcd and address 15
[74427.081238] firewire_core: rediscovered device fw0
[74427.478194] PM: resume of drv:usb dev:5-1 complete after 1045.070 msecs
[74427.478203] PM: resume of drv:usbhid dev:5-1:1.0 complete after 1044.972 msecs
[74427.478209] PM: resume of drv:usbhid dev:5-1:1.1 complete after 1044.924 msecs
[74427.594253] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 1176.674 msecs
[74427.712116] usb 5-2: reset low speed USB device using uhci_hcd and address 16
[74428.019174] PM: resume of drv:usb dev:5-2 complete after 1585.871 msecs
[74428.019199] PM: resume of drv:usbhid dev:5-2:1.0 complete after 1585.821 msecs
[74428.113075] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[74428.321096] PM: resume of drv:usb dev:3-2 complete after 1888.013 msecs
[74428.321119] PM: resume of drv:usb dev:3-2:1.0 complete after 1888.016 msecs
[74428.329613] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000/0x0
[74428.329615] Synaptics: Clickpad mode enabled
[74428.329617] serio: Synaptics pass-through port at isa0060/serio1/input0
[74428.368103] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input41
[74428.757089] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[74428.775307] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[74428.775310] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[74428.775313] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[74428.788246] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[74428.788252] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[74428.788258] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[74428.789207] ata3.00: configured for UDMA/133
[74428.807217] ata3.00: configured for UDMA/133
[74428.807220] ata3: EH complete
[74428.814632] PM: resume of drv:sd dev:2:0:0:0 complete after 2381.608 msecs
[74428.814645] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 2103.538 msecs
[74428.814667] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 2381.605 msecs
[74428.952069] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 137.274 msecs
[74428.952818] thinkpad_acpi: ACPI backlight control delay disabled
[74428.955475] PM: resume of devices complete after 2542.762 msecs
[74428.955675] PM: resume devices took 2.540 seconds
[74428.955701] PM: Finishing wakeup.
[74428.955702] Restarting tasks ... done.
[74428.979540] video LNXVIDEO:01: Restoring backlight state
[74428.980876] [ pm_notifier_block : 170 ] event :4
[74428.980877]
[74429.449415] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[74429.504847] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[74429.505122] ADDRCONF(NETDEV_UP): eth0: link is not ready
[74430.782761] psmouse serio10: ID: 10 00 64
[74434.165837] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[74434.387211] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio10/input/input42
[74465.528080] usb 1-3: new high speed USB device using ehci_hcd and address 112
[74465.660467] usb 1-3: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64
[74465.667616] [ firmware_download : 238 ] download size : 64
[74466.049009] usb 1-3: USB disconnect, address 112
[74466.537117] usb 1-3: new high speed USB device using ehci_hcd and address 113
[74466.669911] [ pd_video_init : 1663 ] register VIDEO/VBI devices
[74466.670285] DVB: registering new adapter (Poseidon dvbt adapter)
[74466.670295] DVB: registering adapter 0 frontend 0 (Poseidon DVB-T)...
[74466.713793] [ fire_audio_urb : 216 ]
[74473.257992] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[74473.258003] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[74473.258509] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[74474.993102]
[74474.993107] + TLG2300 auto suspend +
[74474.993109]
[74475.600139]
[74475.600142] ++ TLG2300 resume ++
[74475.600143]
[74483.465084] eth0: no IPv6 routers present
[74485.845175] e1000e: eth0 NIC Link is Down
[74487.541953] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[74487.541963] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[76290.000112]
[76290.000117] + TLG2300 auto suspend +
[76290.000120]
[76701.024123] usb 1-3: USB disconnect, address 113
[76701.038936] [ pd_video_exit : 1637 ]
[76701.038941] [ poseidon_delete : 211 ]
[76709.816064] usb 1-3: new high speed USB device using ehci_hcd and address 114
[76709.960072] scsi1276 : usb-storage 1-3:1.0
[76711.196112] usb 1-3: USB disconnect, address 114
[76711.564151] usb 1-3: new high speed USB device using ehci_hcd and address 115
[76711.716297] usbserial_generic 1-3:1.0: generic converter detected
[76711.716380] usb 1-3: generic converter now attached to ttyUSB0
[76711.716431] usbserial_generic 1-3:1.1: generic converter detected
[76711.716487] usb 1-3: generic converter now attached to ttyUSB1
[76711.718334] scsi1277 : usb-storage 1-3:1.2
[76711.722103] usbserial_generic 1-3:1.3: generic converter detected
[76711.722189] usb 1-3: generic converter now attached to ttyUSB2
[76711.866966] usb 1-3: USB disconnect, address 115
[76711.867437] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[76711.867447] usbserial_generic 1-3:1.0: device disconnected
[76711.867535] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[76711.867544] usbserial_generic 1-3:1.1: device disconnected
[76711.867752] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[76711.867760] usbserial_generic 1-3:1.3: device disconnected
[76712.136103] usb 1-3: new high speed USB device using ehci_hcd and address 116
[76712.283178] usb 1-3: device descriptor read/all, error -71
[76712.392085] usb 1-3: new high speed USB device using ehci_hcd and address 117
[76712.539803] usbserial_generic 1-3:1.0: generic converter detected
[76712.540003] usb 1-3: generic converter now attached to ttyUSB0
[76712.540150] usbserial_generic 1-3:1.1: generic converter detected
[76712.540297] usb 1-3: generic converter now attached to ttyUSB1
[76712.542646] scsi1278 : usb-storage 1-3:1.2
[76712.543095] usbserial_generic 1-3:1.3: generic converter detected
[76712.543259] usb 1-3: generic converter now attached to ttyUSB2
[76712.666712] usb 1-3: USB disconnect, address 117
[76712.669417] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[76712.669443] usbserial_generic 1-3:1.0: device disconnected
[76712.669665] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[76712.669689] usbserial_generic 1-3:1.1: device disconnected
[76712.670262] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[76712.670287] usbserial_generic 1-3:1.3: device disconnected
[76712.941082] usb 1-3: new high speed USB device using ehci_hcd and address 118
[76713.081296] usbserial_generic 1-3:1.0: generic converter detected
[76713.081481] usb 1-3: generic converter now attached to ttyUSB0
[76713.081627] usbserial_generic 1-3:1.1: generic converter detected
[76713.081774] usb 1-3: generic converter now attached to ttyUSB1
[76713.084062] scsi1279 : usb-storage 1-3:1.2
[76713.084499] usbserial_generic 1-3:1.3: generic converter detected
[76713.084658] usb 1-3: generic converter now attached to ttyUSB2
[76713.284925] usb 1-3: USB disconnect, address 118
[76713.285286] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[76713.285296] usbserial_generic 1-3:1.0: device disconnected
[76713.285385] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[76713.285394] usbserial_generic 1-3:1.1: device disconnected
[76713.289853] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[76713.289861] usbserial_generic 1-3:1.3: device disconnected
[76713.528114] usb 1-3: new high speed USB device using ehci_hcd and address 119
[76713.669263] usbserial_generic 1-3:1.0: generic converter detected
[76713.669453] usb 1-3: generic converter now attached to ttyUSB0
[76713.669608] usbserial_generic 1-3:1.1: generic converter detected
[76713.669759] usb 1-3: generic converter now attached to ttyUSB1
[76713.671998] scsi1280 : usb-storage 1-3:1.2
[76713.673234] usbserial_generic 1-3:1.3: generic converter detected
[76713.673305] usb 1-3: generic converter now attached to ttyUSB2
[76713.775606] usb 1-3: USB disconnect, address 119
[76713.776119] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[76713.776144] usbserial_generic 1-3:1.0: device disconnected
[76713.776383] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[76713.776417] usbserial_generic 1-3:1.1: device disconnected
[76713.782331] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[76713.782355] usbserial_generic 1-3:1.3: device disconnected
[76714.021039] usb 1-3: new high speed USB device using ehci_hcd and address 120
[76714.088297] hub 1-0:1.0: unable to enumerate USB device on port 3
[76714.480047] usb 4-1: new full speed USB device using uhci_hcd and address 41
[76714.624044] usb 4-1: not running at top speed; connect to a high speed hub
[76714.671582] usbserial_generic 4-1:1.0: generic converter detected
[76714.671718] usb 4-1: generic converter now attached to ttyUSB0
[76714.671776] usbserial_generic 4-1:1.1: generic converter detected
[76714.671830] usb 4-1: generic converter now attached to ttyUSB1
[76714.673236] scsi1281 : usb-storage 4-1:1.2
[76714.675547] usbserial_generic 4-1:1.3: generic converter detected
[76714.675637] usb 4-1: generic converter now attached to ttyUSB2
[76715.683293] scsi 1281:0:0:0: Direct-Access USBModem MMC Storage 2.31 PQ: 0 ANSI: 2
[76715.688491] sd 1281:0:0:0: Attached scsi generic sg2 type 0
[76715.697509] sd 1281:0:0:0: [sdb] Attached SCSI removable disk
[77255.888144] usb 4-1: USB disconnect, address 41
[77255.888448] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[77255.888480] usbserial_generic 4-1:1.0: device disconnected
[77255.888703] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[77255.888731] usbserial_generic 4-1:1.1: device disconnected
[77255.903094] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[77255.903127] usbserial_generic 4-1:1.3: device disconnected
[77304.285114] usb 1-3: new high speed USB device using ehci_hcd and address 121
[77304.417502] usb 1-3: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64
[77304.425106] [ firmware_download : 238 ] download size : 64
[77304.815291] usb 1-3: USB disconnect, address 121
[77305.304100] usb 1-3: new high speed USB device using ehci_hcd and address 122
[77305.437940] [ pd_video_init : 1663 ] register VIDEO/VBI devices
[77305.438311] DVB: registering new adapter (Poseidon dvbt adapter)
[77305.438320] DVB: registering adapter 0 frontend 0 (Poseidon DVB-T)...
[77305.499178] [ fire_audio_urb : 216 ]
[77314.008053]
[77314.008058] + TLG2300 auto suspend +
[77314.008061]
[77321.112364]
[77321.112366] ++ TLG2300 resume ++
[77321.112367]
[77330.001043]
[77330.001047] + TLG2300 auto suspend +
[77330.001050]
[77369.463290] PM: Syncing filesystems ... done.
[77369.469684] PM: Preparing system for mem sleep
[77369.469698] [ pm_notifier_block : 170 ] event :3
[77369.469699]
[77369.469701] Freezing user space processes ... (elapsed 0.01 seconds) done.
[77369.485123] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[77369.501094] PM: Entering mem sleep
[77369.501130] Suspending console(s) (use no_console_suspend to debug)
[77369.600266]
[77369.600267] ++ TLG2300 resume ++
[77369.600268]
[77369.600270]
[77369.600271] + TLG2300 auto suspend +
[77369.600271]
[77369.616051] PM: suspend of drv:usb dev:1-3 complete after 114.482 msecs
[77369.656998] PM: suspend of drv:psmouse dev:serio10 complete after 155.495 msecs
[77369.676282] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[77369.718124] sd 2:0:0:0: [sda] Stopping disk
[77369.768563] iwl3945 0000:03:00.0: Master Disable Timed Out, 100 usec
[77369.769129] ata2: port disabled. ignoring.
[77369.769266] ata_piix 0000:00:1f.1: PCI INT C disabled
[77369.769340] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[77369.769369] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[77369.769399] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[77369.769428] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[77369.769453] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY
[77369.770055] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[77369.770084] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[77369.770113] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[77369.772725] e1000e 0000:00:19.0: PME# enabled
[77369.772733] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[77369.776176] ACPI handle has no context!
[77369.876391] HDA Intel 0000:00:1b.0: PCI INT B disabled
[77369.892030] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 122.520 msecs
[77370.184829] PM: suspend of drv:sd dev:2:0:0:0 complete after 508.556 msecs
[77370.184835] PM: suspend of drv:scsi dev:target2:0:0 complete after 508.493 msecs
[77370.184841] PM: suspend of drv:scsi dev:host2 complete after 508.462 msecs
[77370.216034] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 447.027 msecs
[77371.106112] PM: suspend of drv:nvidia dev:0000:01:00.0 complete after 1337.321 msecs
[77371.106139] PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 1333.366 msecs
[77371.106157] PM: suspend of drv: dev:pci0000:00 complete after 1333.356 msecs
[77371.106170] PM: suspend of devices complete after 1604.736 msecs
[77371.106173] PM: suspend devices took 1.604 seconds
[77371.128076] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[77371.136065] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D3
[77371.144063] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[77371.168065] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[77371.196054] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D3
[77371.196241] PM: late suspend of devices complete after 90.062 msecs
[77371.236058] ACPI: Preparing to enter system sleep state S3
[77371.376080] PM: Saving platform NVS memory
[77371.380921] Disabling non-boot CPUs ...
[77371.488043] CPU 1 is now offline
[77371.488046] SMP alternatives: switching to UP code
[77371.493912] Extended CMOS year: 2000
[77371.493912] Back to C!
[77371.493912] PM: Restoring platform NVS memory
[77371.493912] Extended CMOS year: 2000
[77371.493912] Enabling non-boot CPUs ...
[77371.493912] SMP alternatives: switching to SMP code
[77371.499149] Booting Node 0 Processor 1 APIC 0x1
[77371.493577] Initializing CPU#1
[77371.644154] CPU1 is up
[77371.644840] ACPI: Waking up from system sleep state S3
[77371.985246] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[77371.985384] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[77372.029055] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[77372.037064] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[77372.037111] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[77372.045064] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[77372.053064] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[77372.053124] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[77372.061065] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[77372.069064] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[77372.069134] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[77372.069209] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[77372.069297] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x4040, writing 0x20004040)
[77372.069313] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[77372.069408] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[77372.069513] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[77372.069603] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[77372.077064] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[77372.085063] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[77372.085110] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[77372.093063] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[77372.101064] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[77372.101119] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[77372.109063] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[77372.117065] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[77372.117112] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[77372.125064] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[77372.133063] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[77372.133130] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[77372.141064] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[77372.149064] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[77372.149108] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007)
[77372.149248] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[77372.149304] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[77372.149432] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0)
[77372.149439] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007)
[77372.149660] iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[77372.164035] firewire_ohci 0000:15:00.1: BAR 0: set to [mem 0xf8101000-0xf81017ff] (PCI address [0xf8101000-0xf81017ff]
[77372.164086] firewire_ohci 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802000)
[77372.164098] firewire_ohci 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[77372.164701] PM: early resume of devices complete after 179.607 msecs
[77372.164830] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[77372.164837] e1000e 0000:00:19.0: PME# disabled
[77372.164956] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[77372.164973] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[77372.164988] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[77372.165027] usb usb3: root hub lost power or was reset
[77372.165225] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[77372.165236] HDA Intel 0000:00:1b.0: setting latency timer to 64
[77372.165301] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[77372.165349] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY
[77372.165401] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[77372.165414] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[77372.165443] usb usb6: root hub lost power or was reset
[77372.165551] pci 0000:00:1e.0: setting latency timer to 64
[77372.165573] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[77372.165579] ata_piix 0000:00:1f.1: setting latency timer to 64
[77372.165637] ata2: port disabled. ignoring.
[77372.165656] ahci 0000:00:1f.2: setting latency timer to 64
[77372.186426] sd 2:0:0:0: [sda] Starting disk
[77372.200161] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[77372.200401] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[77372.200407] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[77372.200417] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[77372.200474] usb usb4: root hub lost power or was reset
[77372.204291] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[77372.204541] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[77372.204551] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[77372.204562] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[77372.204852] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[77372.205100] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[77372.205106] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[77372.205116] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[77372.205170] usb usb5: root hub lost power or was reset
[77372.205436] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[77372.205683] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[77372.205688] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[77372.205699] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[77372.205750] usb usb7: root hub lost power or was reset
[77372.206005] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[77372.206268] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[77372.206276] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[77372.206286] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[77372.272095] firewire_core: skipped bus generations, destroying all nodes
[77372.328094] PM: resume of drv:usb dev:usb6 complete after 141.894 msecs
[77372.328104] PM: resume of drv:hub dev:6-0:1.0 complete after 141.821 msecs
[77372.344089] PM: resume of drv:usb dev:usb4 complete after 158.173 msecs
[77372.345075] PM: resume of drv:hub dev:4-0:1.0 complete after 159.107 msecs
[77372.345096] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[77372.345099] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[77372.356550] ata1.00: ACPI cmd e3/00:79:00:00:00:a0 (IDLE) succeeded
[77372.356755] PM: resume of drv:usb dev:usb7 complete after 170.453 msecs
[77372.356848] PM: resume of drv:usb dev:usb2 complete after 171.298 msecs
[77372.356858] PM: resume of drv:hub dev:7-0:1.0 complete after 170.541 msecs
[77372.356865] PM: resume of drv:hub dev:2-0:1.0 complete after 171.189 msecs
[77372.357413] ata1.00: ACPI cmd e3/00:01:00:00:00:a0 (IDLE) succeeded
[77372.380894] ata1.00: configured for UDMA/33
[77372.432086] PM: resume of drv:usb dev:usb3 complete after 246.384 msecs
[77372.432098] PM: resume of drv:hub dev:3-0:1.0 complete after 246.265 msecs
[77372.460086] PM: resume of drv:usb dev:usb5 complete after 274.010 msecs
[77372.460099] PM: resume of drv:usb dev:usb1 complete after 274.754 msecs
[77372.460109] PM: resume of drv:hub dev:5-0:1.0 complete after 273.964 msecs
[77372.460171] PM: resume of drv:hub dev:1-0:1.0 complete after 274.740 msecs
[77372.460190] PM: resume of drv: dev:ep_81 complete after 210.507 msecs
[77372.470807] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 305.983 msecs
[77372.720079] usb 5-1: reset low speed USB device using uhci_hcd and address 15
[77372.842366] firewire_core: rediscovered device fw0
[77373.034151] PM: resume of drv:usb dev:5-1 complete after 847.624 msecs
[77373.034160] PM: resume of drv:usbhid dev:5-1:1.0 complete after 847.613 msecs
[77373.034165] PM: resume of drv:usbhid dev:5-1:1.1 complete after 847.599 msecs
[77373.268074] usb 5-2: reset low speed USB device using uhci_hcd and address 16
[77373.341940] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 1176.215 msecs
[77373.575127] PM: resume of drv:usb dev:5-2 complete after 1388.539 msecs
[77373.575151] PM: resume of drv:usbhid dev:5-2:1.0 complete after 1388.544 msecs
[77373.669067] usb 1-3: reset high speed USB device using ehci_hcd and address 122
[77373.800211] usb 1-3: device firmware changed
[77373.800230] PM: resume of drv:usb dev:1-3 complete after 1613.603 msecs
[77373.800240] PM: resume of drv:poseidon dev:1-3:1.0 complete after 1613.593 msecs
[77373.913047] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[77374.067144] PM: resume of drv:usb dev:3-2 complete after 1880.657 msecs
[77374.067168] PM: resume of drv:usb dev:3-2:1.0 complete after 1880.660 msecs
[77374.075372] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000/0x0
[77374.075374] Synaptics: Clickpad mode enabled
[77374.075376] serio: Synaptics pass-through port at isa0060/serio1/input0
[77374.113891] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input43
[77374.513073] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[77374.565302] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[77374.565305] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[77374.565308] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[77374.578044] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[77374.578047] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[77374.578050] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[77374.579105] ata3.00: configured for UDMA/133
[77374.593998] ata3.00: configured for UDMA/133
[77374.594000] ata3: EH complete
[77374.604633] PM: resume of drv:sd dev:2:0:0:0 complete after 2418.203 msecs
[77374.604645] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 2133.808 msecs
[77374.604661] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 2418.193 msecs
[77374.744226] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 139.450 msecs
[77374.744988] thinkpad_acpi: ACPI backlight control delay disabled
[77374.747930] PM: resume of devices complete after 2583.190 msecs
[77374.748161] PM: resume devices took 2.580 seconds
[77374.748189] PM: Finishing wakeup.
[77374.748190] Restarting tasks ...
[77374.748245] usb 1-3: USB disconnect, address 122
[77374.772466] done.
[77374.772471] video LNXVIDEO:01: Restoring backlight state
[77374.773270] [ pm_notifier_block : 170 ] event :4
[77374.773271]
[77374.789146] [ pd_video_exit : 1637 ]
[77374.789150] [ poseidon_delete : 211 ]
[77374.911090] usb 1-3: new high speed USB device using ehci_hcd and address 123
[77375.050114] usb 1-3: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64
[77375.056642] [ firmware_download : 238 ] download size : 64
[77375.176298] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[77375.230506] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[77375.230747] ADDRCONF(NETDEV_UP): eth0: link is not ready
[77375.451729] usb 1-3: USB disconnect, address 123
[77375.941063] usb 1-3: new high speed USB device using ehci_hcd and address 124
[77376.074876] [ pd_video_init : 1663 ] register VIDEO/VBI devices
[77376.075023] DVB: registering new adapter (Poseidon dvbt adapter)
[77376.075027] DVB: registering adapter 0 frontend 0 (Poseidon DVB-T)...
[77376.153475] [ fire_audio_urb : 216 ]
[77376.637959] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[77376.637964] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[77376.638191] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[77377.050293] psmouse serio11: ID: 10 00 64
[77380.499283] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[77380.720370] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio11/input/input44
[77385.008175]
[77385.008180] + TLG2300 auto suspend +
[77385.008183]
[77387.392323] eth0: no IPv6 routers present
[77387.565206] e1000e: eth0 NIC Link is Down
[77389.237994] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[77389.238005] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[78306.145248]
[78306.145254] ++ TLG2300 resume ++
[78306.145256]
Module Size Used by
bluetooth 50500 0
ppp_deflate 3726 0
bsd_comp 4791 0
ppp_async 6778 0
crc_ccitt 1351 1 ppp_async
usbserial 33100 0
usb_storage 40172 0
binfmt_misc 6599 1
ip6table_filter 1275 0
ip6_tables 11764 1 ip6table_filter
pppoe 9015 2
pppox 2054 1 pppoe
ipt_MASQUERADE 1419 3
iptable_nat 3752 1
nf_nat 16289 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 10783 4 iptable_nat,nf_nat
nf_defrag_ipv4 1117 1 nf_conntrack_ipv4
xt_state 1014 1
nf_conntrack 63258 5 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state
ipt_REJECT 2004 2
xt_tcpudp 1927 4
iptable_filter 1302 1
ip_tables 10460 2 iptable_nat,iptable_filter
x_tables 15921 9 ip6table_filter,ip6_tables,ipt_MASQUERADE,iptable_nat,xt_state,ipt_REJECT,xt_tcpudp,iptable_filter,ip_tables
bridge 68008 0
stp 1667 1 bridge
kvm_intel 42113 0
kvm 255701 1 kvm_intel
deflate 1657 0
zlib_deflate 19266 2 ppp_deflate,deflate
ctr 3209 0
twofish 5431 0
twofish_common 12811 1 twofish
camellia 18896 0
serpent 17529 0
blowfish 7318 0
cast5 15556 0
parport_pc 26058 0
ppdev 5556 0
des_generic 15995 0
aes_i586 7280 0
aes_generic 26875 1 aes_i586
xcbc 2235 0
rmd160 6348 0
sha512_generic 7296 0
sha256_generic 11267 0
sha1_generic 1795 0
crypto_null 2242 0
af_key 23878 2
poseidon 37551 1
dvb_core 88505 1 poseidon
nvidia 9329739 45
snd_hda_codec_analog 59649 1
arc4 1165 2
iwl3945 85550 0
pcmcia 35973 0
videobuf_vmalloc 4619 1 poseidon
videobuf_core 16907 2 poseidon,videobuf_vmalloc
v4l2_common 17329 1 poseidon
videodev 43098 2 poseidon,v4l2_common
snd_hda_intel 22107 3
snd_hda_codec 87552 2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep 5040 1 snd_hda_codec
snd_pcm 71475 4 poseidon,snd_hda_intel,snd_hda_codec
snd_seq_midi 4588 0
snd_rawmidi 17783 1 snd_seq_midi
snd_seq_midi_event 6047 1 snd_seq_midi
thinkpad_acpi 67659 0
v4l1_compat 13359 1 videodev
snd_seq 47174 3 snd_seq_midi,snd_seq_midi_event
iwlcore 127415 1 iwl3945
snd_timer 19067 2 snd_pcm,snd_seq
snd_seq_device 5744 3 snd_seq_midi,snd_rawmidi,snd_seq
mac80211 231541 2 iwl3945,iwlcore
tpm_tis 7562 0
joydev 8735 0
tpm 13741 1 tpm_tis
tpm_bios 5310 1 tpm
video 18712 0
led_class 2633 1 thinkpad_acpi
nvram 6342 1 thinkpad_acpi
yenta_socket 21518 0
pcmcia_rsrc 10566 1 yenta_socket
pcmcia_core 14657 3 pcmcia,yenta_socket,pcmcia_rsrc
cfg80211 144470 3 iwl3945,iwlcore,mac80211
intel_agp 26360 0
snd 49006 19 poseidon,snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,thinkpad_acpi,snd_seq,snd_timer,snd_seq_device
output 1883 1 video
psmouse 59033 0
serio_raw 4022 0
soundcore 880 1 snd
snd_page_alloc 7120 2 snd_hda_intel,snd_pcm
agpgart 32011 2 nvidia,intel_agp
lp 7342 0
parport 31492 3 parport_pc,ppdev,lp
hid_a4tech 2018 0
usbhid 36882 0
hid 67742 2 hid_a4tech,usbhid
ahci 19013 0
libahci 21667 7 ahci
firewire_ohci 21106 0
e1000e 132956 0
firewire_core 46643 1 firewire_ohci
crc_itu_t 1383 1 firewire_core
