Dear Marvin et al, This is not urgent for me. I'm just trying to have my portable PC as completely supported as possible, including modem support (which I want for faxes). In case you need anything from me, please write. I'll try to be as responsive as you have been to date. -- Un saludo, Kind regards, Antonio Rodulfo Ingeniero Industrial, Consultor de Proyectos Industrial Engineer, Project Consultant 2011/10/7 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>: > RE: > CC [M] /usr/lib/hsfmodem/modules/osnvm.o > /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared > here (not in a function) > ------- > This error in the code should really be fixed at Linuxant. > However we have previously worked the MUTEX error through in another situation. > > AR, > Wait a while. Either Jonathan will give the fix or I'll dig out my > own notes and work it through again. > > Marvin > > > ---------- Forwarded message ---------- > From: Antonio Rodulfo <antonio.rodulfo@xxxxxxxxx> > Date: Fri, Oct 7, 2011 at 10:45 AM > Subject: Re: Antonio Rodulfo, Spain, kernel 2.6.38-11-generic, amd64 distro > To: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> > Cc: Discuss@xxxxxxxxxxxxx > > > Dear Marvin, > > I have just tried to build the hsfmodem module. The "make install" > procedure ended with errors. > Please find attached the logfile compiled by the procedure. > > What can I do next? > Thanks a lot in advance. > -- > Un saludo, > Kind regards, > > Antonio Rodulfo > Ingeniero Industrial, Consultor de Proyectos > Industrial Engineer, Project Consultant > > > > 2011/10/7 Antonio Rodulfo <antonio.rodulfo@xxxxxxxxx>: >> Ok, then! >> Thanks, Marvin! >> -- >> Un saludo, >> Kind regards, >> >> Antonio Rodulfo >> Ingeniero Industrial, Consultor de Proyectos >> Industrial Engineer, Project Consultant >> >> >> >> 2011/10/7 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>: >>> AR >>> >>> Download both packages. >>> Try the hsfmodem package installation alone first. >>> It may abort with message that the linuxant-alsa package is needed. >>> >>> In that case, install the linuxant-alsa package. >>> Then again try the hsfmodem package. >>> >>> MarvS >>> >>> On Fri, Oct 7, 2011 at 10:05 AM, Antonio Rodulfo >>> <antonio.rodulfo@xxxxxxxxx> wrote: >>>> Dear Marvin, >>>> >>>> Thank you so much for your help. >>>> If I get it right, I must intall the recommended alsa driver first >>>> and, then, download and install the hsfmodem files. >>>> Can you confirm it? >>>> >>>> Thanks in advance. >>>> -- >>>> Un saludo, >>>> Kind regards, >>>> >>>> Antonio Rodulfo >>>> Ingeniero Industrial, Consultor de Proyectos >>>> Industrial Engineer, Project Consultant >>>> >>>> >>>> >>>> 2011/10/6 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>: >>>>> AR >>>>> >>>>> for x86_64 systems you can use hsfmodem-7.80.02.06x86_64full.tar.gz >>>>> found near the bottom of http://www.linuxant.com/drivers/hsf/full/downloads.php >>>>> Unpack with >>>>> $ tar zxf hsf*.tar.ggz >>>>> and follow the instructions in the new folder exposed. >>>>> >>>>> You way be informed that it is also necessary to install from >>>>> http://www.linuxant.com/alsa-driver/ the >>>>> alsa-driver-linuxant_1.0.23.1_all.deb.zip , in which case. >>>>> $ unzip driver*.zip >>>>> $ dpkg -i driver *. deb >>>>> and again start the hsfmodem install. >>>>> >>>>> If the is a mismatch between ALSA versions of the Linuxant and >>>>> packages, you may lose audio support. >>>>> But let's deal with that later. >>>>> >>>>> MarvS >>>>> scanModem maintainer >>>>> >>>>> On Thu, Oct 6, 2011 at 2:08 PM, Antonio Rodulfo >>>>> <antonio.rodulfo@xxxxxxxxx> wrote: >>>>>> Dear Antonio, >>>>>> >>>>>> Thank you so much for your quick answer. >>>>>> I have reviewed the options available at Linuxant's and, sadly, >>>>>> there's no exact package for 2.38.11. In fact, the latest available >>>>>> package seems to match 2.31.17. >>>>>> Moreover, it seems to correspond to the x86, i.e., 32 bits kernel. >>>>>> >>>>>> As far as the web is concerned, I have two options: on the one hand, I >>>>>> can download the available package and try to install and use it >>>>>> (maybe I should cross my fingers?); on the other hand, I can download >>>>>> the generic package and do my best (not that much, for the time being, >>>>>> given my small experience) to get a proper driver compiled / >>>>>> installed. >>>>>> What would you recomend? >>>>>> >>>>>> In case I decide to use the generic package: >>>>>> * is it enough for me to have the proper headers installed or do I >>>>>> need to have the full kernel source? >>>>>> * given the fact I'm using the 64 bits system, shouldn't I use the >>>>>> x86_64 generic package? >>>>>> >>>>>> Thanks a lot in advance. >>>>>> >>>>>> -- >>>>>> Un saludo, >>>>>> Kind regards, >>>>>> >>>>>> Antonio Rodulfo >>>>>> Ingeniero Industrial, Consultor de Proyectos >>>>>> Industrial Engineer, Project Consultant >>>>>> >>>>>> >>>>>> >>>>>> 2011/10/6 Antonio Olivares <olivares14031@xxxxxxxxx>: >>>>>>> Antonio, >>>>>>> >>>>>>> scanModem reports that your modem is supported by hsfmodem drivers. >>>>>>> The snd_hda_intel driver is for sound and for certain modems supported >>>>>>> by SLMODEMD variants. >>>>>>> >>>>>>> Predictive diagnostics for card in bus 00:1b.0: >>>>>>> Modem chipset detected on >>>>>>> NAME="Audio device: Intel Corporation N10/ICH 7 Family High Definition >>>>>>> Audio Controller " >>>>>>> CLASS=0403 >>>>>>> PCIDEV=8086:27d8 >>>>>>> SUBSYS=152d:0753 >>>>>>> IRQ=46 >>>>>>> HDA2=00:1b.0 >>>>>>> SOFT=8086:27d8.HDA >>>>>>> ArchivedChip=0x14f12bfa >>>>>>> CodecClass=14f1 >>>>>>> IDENT=hsfmodem >>>>>>> Driver=hsfmodem-drivers >>>>>>> >>>>>>> For candidate modem in: 00:1b.0 >>>>>>> 0403 Audio device: Intel Corporation N10/ICH 7 Family High >>>>>>> Definition Audio Controller >>>>>>> Primary device ID: 8086:27d8 >>>>>>> Subsystem PCI_id 152d:0753 >>>>>>> Softmodem codec or chipset from diagnostics: >>>>>>> from Archives: 0x14f12bfa >>>>>>> >>>>>>> >>>>>>> >>>>>>> Support type needed or chipset: hsfmodem >>>>>>> >>>>>>> >>>>>>> Writing DOCs/Intel.txt >>>>>>> >>>>>>> For owners of a Dell PCs with Conexant HSF modems, a driver source >>>>>>> package with full speed enabled is available, but requires driver >>>>>>> compiling. Read DOCs/Conexant.txt >>>>>>> >>>>>>> >>>>>>> Modem support packages from Linuxant include resources for compiling drivers. >>>>>>> If an installer package matching your kernel_version is not provided, >>>>>>> just install a generic code package. >>>>>>> >>>>>>> From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php >>>>>>> download hsfmodem-7.80.02.05full_k2.6.38_11_generic_ubuntu_i386.deb.zip >>>>>>> Under Linux unpack with: >>>>>>> $ unzip hsfmodem*.zip >>>>>>> Then install with: >>>>>>> $ sudo dpkg -i hsfmodem*.deb >>>>>>> Subsequently, the modem should be found with >>>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>>> Edit in your personal information with: >>>>>>> $ sudo gedit /etc/wvdial.conf >>>>>>> and try dialing out with: >>>>>>> $ sudo wvdial. >>>>>>> See DOCs/Testing.txt for details. >>>>>>> >>>>>>> Download generic package: >>>>>>> >>>>>>> http://www.linuxant.com/drivers/hsf/full/archive/hsfmodem-7.80.02.06full/hsfmodem_7.80.02.06full_i386.deb.zip >>>>>>> and follow instructions provided >>>>>>> >>>>>>> METHOD B: DEBIAN PACKAGE (*.deb) >>>>>>> If you have obtained the driver package in DEBIAN format: >>>>>>> >>>>>>> 1. install the package with "dpkg -i hsfmodem_{version}_{arch}.deb", >>>>>>> if apt-get or some other tool hasn't already done it for you. >>>>>>> >>>>>>> 2. if necessary, run "hsfconfig" to complete the installation, enter >>>>>>> license information, or to change your modem's configuration. >>>>>>> >>>>>>> If you need to rebuild the Debian generic package from source, you can >>>>>>> get the TAR package, and from the top directory run: "make debdist". A >>>>>>> pre-compiled DEB package for the currently running kernel can be built >>>>>>> using "make debprecomp" instead. >>>>>>> >>>>>>> http://www.linuxant.com/drivers/hsf/install.php >>>>>>> >>>>>>> Sadly you appear to also have a Modem Interrupt assignment which may >>>>>>> affect the drivers, if you install the driver and your modem is >>>>>>> nonresponsive please send us output of dmesg as it says here: >>>>>>> >>>>>>> For candidate card in slot 00:1b.0, firmware information and bootup >>>>>>> diagnostics are: >>>>>>> PCI slot PCI ID SubsystemID Name >>>>>>> ---------- --------- --------- -------------- >>>>>>> 00:1b.0 8086:27d8 152d:0753 Audio device: Intel Corporation N10/ICH 7 >>>>>>> Family High Definition Audio Controller >>>>>>> >>>>>>> Modem interrupt assignment and sharing: >>>>>>> 46: 449 0 PCI-MSI-edge hda_intel >>>>>>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >>>>>>> [ 0.421621] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 >>>>>>> [ 0.421621] pci 0000:00:1b.0: reg 10: [mem 0xde300000-0xde303fff 64bit] >>>>>>> [ 0.421621] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>>>>>> [ 0.421621] pci 0000:00:1b.0: PME# disabled >>>>>>> [ 13.536785] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>>> low) -> IRQ 22 >>>>>>> [ 13.536846] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>>> [ 13.536874] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>>> [46062.850301] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>>> [46062.870026] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>>> after 129.960 msecs >>>>>>> [46063.320332] HDA Intel 0000:00:1b.0: restoring config space at >>>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>>> [46063.419918] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>>> low) -> IRQ 22 >>>>>>> [46063.419930] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>>> [46063.420029] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>>> [51232.280187] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>>> [51232.300025] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>>> after 128.907 msecs >>>>>>> [51232.750333] HDA Intel 0000:00:1b.0: restoring config space at >>>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>>> [51232.849917] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>>> low) -> IRQ 22 >>>>>>> [51232.849929] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>>> [51232.850033] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>>> [76807.210217] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>>> [76807.230028] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>>> after 126.607 msecs >>>>>>> [76807.760333] HDA Intel 0000:00:1b.0: restoring config space at >>>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>>> [76807.858066] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>>> low) -> IRQ 22 >>>>>>> [76807.858078] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>>> [76807.858155] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>>> [87584.890190] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>>> [87584.910024] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>>> after 122.420 msecs >>>>>>> [87585.370333] HDA Intel 0000:00:1b.0: restoring config space at >>>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>>> [87585.461165] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>>> low) -> IRQ 22 >>>>>>> [87585.461176] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>>> [87585.461254] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>>> [123722.470213] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>>> [123722.490027] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>>> after 125.325 msecs >>>>>>> [123723.030325] HDA Intel 0000:00:1b.0: restoring config space at >>>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>>> [123723.125473] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>>> low) -> IRQ 22 >>>>>>> [123723.125486] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>>> [123723.125563] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>>> [171941.990190] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>>> [171942.010031] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>>> after 129.819 msecs >>>>>>> [171942.540332] HDA Intel 0000:00:1b.0: restoring config space at >>>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>>> [171942.639816] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>>> low) -> IRQ 22 >>>>>>> [171942.639828] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>>> [171942.639901] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>>> [219683.870202] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>>> [219683.890029] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>>> after 123.755 msecs >>>>>>> [219684.470333] HDA Intel 0000:00:1b.0: restoring config space at >>>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>>> [219684.570243] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>>> low) -> IRQ 22 >>>>>>> [219684.570255] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>>> [219684.570328] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>>> [271116.110195] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>>> [271116.130029] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>>> after 129.850 msecs >>>>>>> [271116.630347] HDA Intel 0000:00:1b.0: restoring config space at >>>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>>> [271116.727148] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>>> low) -> IRQ 22 >>>>>>> [271116.727160] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>>> [271116.727233] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>>> [298911.650215] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>>> [298911.670027] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>>> after 128.981 msecs >>>>>>> [298912.220335] HDA Intel 0000:00:1b.0: restoring config space at >>>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>>> [298912.310282] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>>> low) -> IRQ 22 >>>>>>> [298912.310294] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>>> [298912.310367] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>>> [350457.090193] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>>> [350457.110027] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>>> after 123.903 msecs >>>>>>> [350457.570330] HDA Intel 0000:00:1b.0: restoring config space at >>>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>>> [350457.663155] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>>> low) -> IRQ 22 >>>>>>> [350457.663167] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>>> [350457.663241] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>>> [401399.270191] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>>> [401399.290040] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>>> after 125.578 msecs >>>>>>> [401399.750334] HDA Intel 0000:00:1b.0: restoring config space at >>>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>>> [401399.850097] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>>> low) -> IRQ 22 >>>>>>> [401399.850109] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>>> [401399.850180] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>>> >>>>>>> The PCI slot 00:1b.0 of the modem card may be disabled early in >>>>>>> a bootup process, but then enabled later. If modem drivers load >>>>>>> but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. >>>>>>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >>>>>>> if help is needed. >>>>>>> >>>>>>> >>>>>>> Regards, >>>>>>> >>>>>>> Antonio >>>>>>> >>>>>>> On Thu, Oct 6, 2011 at 9:54 AM, Antonio Rodulfo >>>>>>> <antonio.rodulfo@xxxxxxxxx> wrote: >>>>>>>> Dear all, >>>>>>>> >>>>>>>> I've just dowloaded scanModem from your web page, uncompressed and >>>>>>>> executed it in my system. >>>>>>>> Attached you'll find the ModemData.txt it has just produced. >>>>>>>> >>>>>>>> I'm not "afraid" of the file and its contents. However, I can't >>>>>>>> properly interpret it. It says "Potentially useful modem drivers now >>>>>>>> loaded are: snd_hda_intel", but it doesn't conclude if the driver is >>>>>>>> properly supporting the modem or not, nor have I any clue on how to >>>>>>>> actually test it. >>>>>>>> >>>>>>>> Please help! >>>>>>>> -- >>>>>>>> Un saludo, >>>>>>>> Kind regards, >>>>>>>> >>>>>>>> Antonio Rodulfo >>>>>>>> Ingeniero Industrial, Consultor de Proyectos >>>>>>>> Industrial Engineer, Project Consultant >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
