Hi & thanks 4 help in advance!
I have build martian-full-20100123 and installed it heres my ModemData,text &
dmsg.text
for my agere systems 56 winmodem too. The modem is dialing the number
but it stats that there is no carrier.
why ???
I have tried all combos of the Init2 ATQO V1 E1 SO=O.X3 &C1 &D2 +FCLASS=O
including +MS=90 and +MS=34 still NO CARRIER
Have the Carrier Check = no in wvdial.conf too.
PLEASE HELP: I've Been working on gettting this modem working for about 6 days
now! Lots of reading , And have waited for almost 24h for a reply now.
Sorry 4 sending this email 2 time, but I really need to get this computer up
and going for a friend !
Please note: I have worked with and installed 3 or 4 of the linmodems too.
Just not the Martian modem until now.
Thanks for your Help and God bless.
root@home:/home/walter# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT2564854255
--> Waiting for carrier.
ATDT2564854255
NO CARRIER
--> No Carrier! Trying again.
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.32-5-686
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, debian , ALSA_version=1.0.21
Linux version 2.6.32-5-686 (Debian 2.6.32-35) (dannf@xxxxxxxxxx) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jun 13 04:13:06 UTC 2011
scanModem update of: 2011_08_08
/etc/lsb-release not found
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
Attached USB devices are:
ID 0781:5530 SanDisk Corp.
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
04:02.0 Communication controller: Agere Systems 56k WinModem (rev 01)
High Definition Audio cards can host modem chips.
For candidate card in slot 04:02.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
04:02.0 11c1:0442 149f:0440 Communication controller: Agere Systems 56k WinModem
Modem interrupt assignment and sharing:
23: 391 IO-APIC-fasteoi uhci_hcd:usb5, Intel ICH6
--- Bootup diagnostics for card in PCI slot 04:02.0 ----
[ 0.165290] pci 0000:04:02.0: reg 10 32bit mmio: [0xdfafff00-0xdfafffff]
[ 0.165299] pci 0000:04:02.0: reg 14 io port: [0xc8f8-0xc8ff]
[ 0.165307] pci 0000:04:02.0: reg 18 io port: [0xcc00-0xccff]
[ 0.165348] pci 0000:04:02.0: supports D2
[ 0.165351] pci 0000:04:02.0: PME# supported from D2 D3hot D3cold
[ 0.165356] pci 0000:04:02.0: PME# disabled
The PCI slot 04:02.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 04:02.0:
Modem chipset detected on
NAME="Communication controller: Agere Systems 56k WinModem "
CLASS=0780
PCIDEV=11c1:0442
SUBSYS=149f:0440
IRQ=3
IDENT=Agere.DSP
For candidate modem in: 04:02.0
0780 Communication controller: Agere Systems 56k WinModem
Primary device ID: 11c1:0442
Support type needed or chipset: Agere.DSP
The modem has a Lucent/Agere/LSI Mars or Apollo DSP (digital signal processing) chipset.
Support packages for 2.6.n kernels are at:
http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
http://packages.debian.org/sid/martian-modem-source/
Always use the most update for kernels after 2.6.20, currently martian-full-20080625.tar.gz
For kernels 2.6.20 and less, usr martian-full-20080407.tar.gz.
There are corresponding packages for the Ubuntu distribution:
martian-modem - ltmodem alternative driver providing support for Agere WinModem
martian-modem-source - Source for the martian-modem driver
See DOCs/AgereDSP.txt for Details.
At http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/ get the martian-full-20080625.tar.gz and follow Readme-NOW.html
0x0442 -- Mars 2 - data/fax/tam only
-------------- end Agere Systems section -------------------
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.5
and the compiler used in kernel assembly: 4.3.5
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.32-5-686/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
For Debian and some related distributions, a package kernel-kbuild-2.6-32 may be needed to support driver compiling.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 273568 Aug 8 2010 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
crtscts
lock
hide-password
modem
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/alsa-base-blacklist.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/alsa-base-blacklist.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/alsa-base-blacklist.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
For Debian users, the linux-headers-2.6.32-5-686.deb can be used instead of kernel-source/
CPU0
0: 53 IO-APIC-edge timer
1: 200 IO-APIC-edge i8042
4: 2 IO-APIC-edge
7: 0 IO-APIC-edge parport0
8: 1 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
12: 43131 IO-APIC-edge i8042
14: 17096 IO-APIC-edge ata_piix
15: 0 IO-APIC-edge ata_piix
16: 71 IO-APIC-fasteoi eth0
18: 0 IO-APIC-fasteoi uhci_hcd:usb4
20: 0 IO-APIC-fasteoi ahci
21: 1662 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
22: 0 IO-APIC-fasteoi uhci_hcd:usb3
23: 391 IO-APIC-fasteoi uhci_hcd:usb5, Intel ICH6
NMI: 0 Non-maskable interrupts
LOC: 36785 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 0 Performance monitoring interrupts
PND: 0 Performance pending work
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 2 Machine check polls
ERR: 0
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-35) (dannf@xxxxxxxxxx) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jun 13 04:13:06 UTC 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe8cc00 (usable)
[ 0.000000] BIOS-e820: 000000003fe8cc00 - 000000003fe8ec00 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fe8ec00 - 000000003fe90c00 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fe90c00 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x3fe8c max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 2f610000 - 2ff28c9c
[ 0.000000] ACPI: RSDP 000febf0 00014 (v00 DELL )
[ 0.000000] ACPI: RSDT 000fccbf 0003C (v01 DELL 8400 00000007 ASL 00000061)
[ 0.000000] ACPI: FACP 000fccfb 00074 (v01 DELL 8400 00000007 ASL 00000061)
[ 0.000000] ACPI: DSDT fffc69b5 02AEE (v01 DELL dt_ex 00001000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 3fe8cc00 00040
[ 0.000000] ACPI: SSDT fffc94a3 000A7 (v01 DELL st_ex 00001000 MSFT 0100000D)
[ 0.000000] ACPI: APIC 000fcd6f 00072 (v01 DELL 8400 00000007 ASL 00000061)
[ 0.000000] ACPI: BOOT 000fcde1 00028 (v01 DELL 8400 00000007 ASL 00000061)
[ 0.000000] ACPI: MCFG 000fce09 0003E (v01 DELL 8400 00000007 ASL 00000061)
[ 0.000000] ACPI: HPET 000fce47 00038 (v01 DELL 8400 00000007 ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 138MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c8bb4] TEXT DATA BSS ==> [0001000000 - 00014c8bb4]
[ 0.000000] #4 [002f610000 - 002ff28c9c] RAMDISK ==> [002f610000 - 002ff28c9c]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00014c9000 - 00014cf190] BRK ==> [00014c9000 - 00014cf190]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] found SMP MP-table at [c00fe710] fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003fe8c
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0003fe8c
[ 0.000000] On node 0 totalpages: 261676
[ 0.000000] free_area_init_node: node 0, pgdat c13b08a0, node_mem_map c14d1000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3968 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 278 pages used for memmap
[ 0.000000] HighMem zone: 35192 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34328 r0 d23016 u1048576
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259630
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=/dev/mapper/home-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0003fe8c)
[ 0.000000] Memory: 1022464k/1047088k available (2504k kernel code, 23516k reserved, 1313k data, 380k init, 141880k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bb000 - 0xc141a000 ( 380 kB)
[ 0.000000] .data : 0xc1272001 - 0xc13ba4c0 (1313 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1272001 (2504 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2992.536 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.07 BogoMIPS (lpj=11970144)
[ 0.004025] Security Framework initialized
[ 0.004031] SELinux: Disabled at boot.
[ 0.004040] Mount-cache hash table entries: 512
[ 0.004182] Initializing cgroup subsys ns
[ 0.004187] Initializing cgroup subsys cpuacct
[ 0.004193] Initializing cgroup subsys devices
[ 0.004197] Initializing cgroup subsys freezer
[ 0.004200] Initializing cgroup subsys net_cls
[ 0.004231] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004235] CPU: L2 cache: 2048K
[ 0.004238] CPU: Physical Processor ID: 0
[ 0.004240] CPU: Processor Core ID: 0
[ 0.004245] mce: CPU supports 4 MCE banks
[ 0.004258] CPU0: Thermal monitoring enabled (TM1)
[ 0.004262] using mwait in idle threads.
[ 0.004271] Performance Events: no PMU driver, software events only.
[ 0.004279] Checking 'hlt' instruction... OK.
[ 0.020463] SMP alternatives: switching to UP code
[ 0.027134] ACPI: Core revision 20090903
[ 0.056868] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.057211] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.096905] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
[ 0.100001] Brought up 1 CPUs
[ 0.100001] Total of 1 processors activated (5985.07 BogoMIPS).
[ 0.100001] CPU0 attaching NULL sched-domain.
[ 0.100001] devtmpfs: initialized
[ 0.100001] regulator: core version 0.5
[ 0.100001] NET: Registered protocol family 16
[ 0.100001] ACPI: bus type pci registered
[ 0.100001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.100001] PCI: MCFG area at e0000000 reserved in E820
[ 0.100001] PCI: Using MMCONFIG for extended config space
[ 0.100001] PCI: Using configuration type 1 for base access
[ 0.100001] bio: create slab <bio-0> at 0
[ 0.100001] ACPI: EC: Look up EC in DSDT
[ 0.123587] ACPI: Interpreter enabled
[ 0.123594] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.123623] ACPI: Using IOAPIC for interrupt routing
[ 0.160663] ACPI: No dock devices found.
[ 0.163612] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.163736] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.163741] pci 0000:00:01.0: PME# disabled
[ 0.163831] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.163836] pci 0000:00:1c.0: PME# disabled
[ 0.163904] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.163909] pci 0000:00:1c.1: PME# disabled
[ 0.163963] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
[ 0.164023] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
[ 0.164076] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
[ 0.164128] pci 0000:00:1d.3: reg 20 io port: [0xff20-0xff3f]
[ 0.164185] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80800-0xffa80bff]
[ 0.164238] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.164243] pci 0000:00:1d.7: PME# disabled
[ 0.164327] pci 0000:00:1e.2: reg 10 io port: [0xec00-0xecff]
[ 0.164334] pci 0000:00:1e.2: reg 14 io port: [0xe8c0-0xe8ff]
[ 0.164341] pci 0000:00:1e.2: reg 18 32bit mmio: [0xdffffa00-0xdffffbff]
[ 0.164349] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xdffff900-0xdffff9ff]
[ 0.164377] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.164382] pci 0000:00:1e.2: PME# disabled
[ 0.164455] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0c00-0c7f
[ 0.164460] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 00e0-00ef
[ 0.164486] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.164493] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.164501] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[ 0.164508] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[ 0.164516] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.164560] pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07]
[ 0.164567] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13]
[ 0.164574] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27]
[ 0.164581] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33]
[ 0.164588] pci 0000:00:1f.2: reg 20 io port: [0xfea0-0xfeaf]
[ 0.164595] pci 0000:00:1f.2: reg 24 32bit mmio: [0xdffffc00-0xdfffffff]
[ 0.164615] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.164620] pci 0000:00:1f.2: PME# disabled
[ 0.164672] pci 0000:00:1f.3: reg 20 io port: [0xe8a0-0xe8bf]
[ 0.164729] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.164736] pci 0000:01:00.0: reg 14 io port: [0xdc00-0xdcff]
[ 0.164743] pci 0000:01:00.0: reg 18 32bit mmio: [0xdfde0000-0xdfdeffff]
[ 0.164760] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdfe00000-0xdfe1ffff]
[ 0.164781] pci 0000:01:00.0: supports D1 D2
[ 0.164814] pci 0000:01:00.1: reg 10 32bit mmio: [0xdfdf0000-0xdfdfffff]
[ 0.164854] pci 0000:01:00.1: supports D1 D2
[ 0.164874] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.164935] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[ 0.164939] pci 0000:00:01.0: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
[ 0.164944] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.165009] pci 0000:02:00.0: reg 10 64bit mmio: [0xdfcf0000-0xdfcfffff]
[ 0.165084] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.165090] pci 0000:02:00.0: PME# disabled
[ 0.165121] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.165197] pci 0000:00:1c.0: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
[ 0.165246] pci 0000:00:1c.1: bridge 32bit mmio: [0xdfb00000-0xdfbfffff]
[ 0.165290] pci 0000:04:02.0: reg 10 32bit mmio: [0xdfafff00-0xdfafffff]
[ 0.165299] pci 0000:04:02.0: reg 14 io port: [0xc8f8-0xc8ff]
[ 0.165307] pci 0000:04:02.0: reg 18 io port: [0xcc00-0xccff]
[ 0.165348] pci 0000:04:02.0: supports D2
[ 0.165351] pci 0000:04:02.0: PME# supported from D2 D3hot D3cold
[ 0.165356] pci 0000:04:02.0: PME# disabled
[ 0.165407] pci 0000:00:1e.0: transparent bridge
[ 0.165412] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[ 0.165417] pci 0000:00:1e.0: bridge 32bit mmio: [0xdfa00000-0xdfafffff]
[ 0.165439] pci_bus 0000:00: on NUMA node 0
[ 0.165445] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.165758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.166124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 0.166318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
[ 0.166511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 0.457164] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.457509] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.457857] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 0.458196] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.458540] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 0.458884] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.459225] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 0.459567] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.459740] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.459745] vgaarb: loaded
[ 0.459816] PCI: Using ACPI for IRQ routing
[ 0.459975] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.459982] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.459988] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.464021] Switching to clocksource tsc
[ 0.465391] pnp: PnP ACPI init
[ 0.465405] ACPI: bus type pnp registered
[ 0.489506] pnp: PnP ACPI: found 13 devices
[ 0.489510] ACPI: ACPI bus type pnp unregistered
[ 0.489514] PnPBIOS: Disabled by ACPI PNP
[ 0.489527] system 00:01: ioport range 0x800-0x85f has been reserved
[ 0.489531] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 0.489535] system 00:01: ioport range 0x860-0x8ff has been reserved
[ 0.489545] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.489549] system 00:0a: iomem range 0x100000-0xffffff could not be reserved
[ 0.489553] system 00:0a: iomem range 0x1000000-0x3fe8cbff could not be reserved
[ 0.489557] system 00:0a: iomem range 0xc0000-0xfffff could not be reserved
[ 0.489561] system 00:0a: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 0.489565] system 00:0a: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.489568] system 00:0a: iomem range 0xfed20000-0xfed9ffff has been reserved
[ 0.489572] system 00:0a: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.489576] system 00:0a: iomem range 0xffc00000-0xffffffff has been reserved
[ 0.489582] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.489586] system 00:0b: iomem range 0xfeda0000-0xfedacfff has been reserved
[ 0.524338] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.524342] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.524347] pci 0000:00:01.0: MEM window: 0xdfd00000-0xdfefffff
[ 0.524351] pci 0000:00:01.0: PREFETCH window: 0xd0000000-0xd7ffffff
[ 0.524357] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.524361] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.524367] pci 0000:00:1c.0: MEM window: 0xdfc00000-0xdfcfffff
[ 0.524371] pci 0000:00:1c.0: PREFETCH window: 0x00000040000000-0x000000401fffff
[ 0.524378] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.524382] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
[ 0.524387] pci 0000:00:1c.1: MEM window: 0xdfb00000-0xdfbfffff
[ 0.524392] pci 0000:00:1c.1: PREFETCH window: 0x00000040200000-0x000000403fffff
[ 0.524399] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.524403] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 0.524408] pci 0000:00:1e.0: MEM window: 0xdfa00000-0xdfafffff
[ 0.524412] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.524430] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.524435] pci 0000:00:01.0: setting latency timer to 64
[ 0.524444] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.524449] pci 0000:00:1c.0: setting latency timer to 64
[ 0.524459] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.524464] pci 0000:00:1c.1: setting latency timer to 64
[ 0.524471] pci 0000:00:1e.0: setting latency timer to 64
[ 0.524476] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.524480] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.524483] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.524487] pci_bus 0000:01: resource 1 mem: [0xdfd00000-0xdfefffff]
[ 0.524490] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]
[ 0.524494] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.524497] pci_bus 0000:02: resource 1 mem: [0xdfc00000-0xdfcfffff]
[ 0.524500] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x401fffff]
[ 0.524504] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
[ 0.524507] pci_bus 0000:03: resource 1 mem: [0xdfb00000-0xdfbfffff]
[ 0.524510] pci_bus 0000:03: resource 2 pref mem [0x40200000-0x403fffff]
[ 0.524514] pci_bus 0000:04: resource 0 io: [0xc000-0xcfff]
[ 0.524517] pci_bus 0000:04: resource 1 mem: [0xdfa00000-0xdfafffff]
[ 0.524520] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.524523] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[ 0.524558] NET: Registered protocol family 2
[ 0.524662] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.525056] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.525589] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.525893] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.525896] TCP reno registered
[ 0.525993] NET: Registered protocol family 1
[ 0.526104] pci 0000:01:00.0: Boot video device
[ 0.526166] Unpacking initramfs...
[ 0.847943] Freeing initrd memory: 9315k freed
[ 0.855657] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
[ 0.855661] Simple Boot Flag at 0x7a set to 0x1
[ 0.855967] audit: initializing netlink socket (disabled)
[ 0.855986] type=2000 audit(1316018951.855:1): initialized
[ 0.859603] highmem bounce pool size: 64 pages
[ 0.859610] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.861186] VFS: Disk quotas dquot_6.5.2
[ 0.861257] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.861345] msgmni has been set to 1739
[ 0.861569] alg: No test for stdrng (krng)
[ 0.861633] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.861637] io scheduler noop registered
[ 0.861639] io scheduler anticipatory registered
[ 0.861642] io scheduler deadline registered
[ 0.861683] io scheduler cfq registered (default)
[ 0.861817] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.861825] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.861937] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.861946] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.862080] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.862090] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.862293] isapnp: Scanning for PnP cards...
[ 1.215432] isapnp: No Plug & Play device found
[ 1.217353] Linux agpgart interface v0.103
[ 1.217488] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.217594] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.217989] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.218160] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.220955] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.220963] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.221085] mice: PS/2 mouse device common for all mice
[ 1.221152] rtc_cmos 00:05: RTC can wake from S4
[ 1.221193] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.221219] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
[ 1.221234] cpuidle: using governor ladder
[ 1.221237] cpuidle: using governor menu
[ 1.221242] No iBFT detected.
[ 1.221667] TCP cubic registered
[ 1.221797] NET: Registered protocol family 10
[ 1.222789] Mobile IPv6
[ 1.222793] NET: Registered protocol family 17
[ 1.222813] Using IPI No-Shortcut mode
[ 1.222896] PM: Resume from disk failed.
[ 1.222909] registered taskstats version 1
[ 1.223235] rtc_cmos 00:05: setting system clock to 2011-09-14 16:49:13 UTC (1316018953)
[ 1.223275] Initalizing network drop monitor service
[ 1.223303] Freeing unused kernel memory: 380k freed
[ 1.223612] Write protecting the kernel text: 2508k
[ 1.223630] Write protecting the kernel read-only data: 904k
[ 1.245982] udev[46]: starting version 164
[ 1.253597] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.449778] usbcore: registered new interface driver usbfs
[ 1.449964] usbcore: registered new interface driver hub
[ 1.450148] usbcore: registered new device driver usb
[ 1.452946] SCSI subsystem initialized
[ 1.484474] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.484517] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.484536] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.484541] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.484565] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.484604] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.488479] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 1.488517] libata version 3.00 loaded.
[ 1.497165] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
[ 1.512878] tg3.c:v3.102 (September 1, 2009)
[ 1.512899] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.512909] tg3 0000:02:00.0: setting latency timer to 64
[ 1.524011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.524040] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.524045] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.524048] usb usb1: Product: EHCI Host Controller
[ 1.524050] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.524053] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.524150] usb usb1: configuration #1 chosen from 1 choice
[ 1.524192] hub 1-0:1.0: USB hub found
[ 1.524204] hub 1-0:1.0: 8 ports detected
[ 1.524498] ahci 0000:00:1f.2: version 3.0
[ 1.524514] ahci 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 1.524626] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[ 1.524631] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
[ 1.524636] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.525726] scsi0 : ahci
[ 1.527322] scsi1 : ahci
[ 1.535408] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.535446] scsi2 : ahci
[ 1.536862] scsi3 : ahci
[ 1.536924] ata1: SATA max UDMA/133 abar m1024@0xdffffc00 port 0xdffffd00 irq 20
[ 1.536929] ata2: SATA max UDMA/133 abar m1024@0xdffffc00 port 0xdffffd80 irq 20
[ 1.536932] ata3: SATA max UDMA/133 abar m1024@0xdffffc00 port 0xdffffe00 irq 20
[ 1.536936] ata4: SATA max UDMA/133 abar m1024@0xdffffc00 port 0xdffffe80 irq 20
[ 1.536983] ata_piix 0000:00:1f.1: version 2.13
[ 1.536997] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.537047] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.537395] scsi4 : ata_piix
[ 1.538303] eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:13:20:2d:15:94
[ 1.538307] eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.538311] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.538314] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.538538] scsi5 : ata_piix
[ 1.538591] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.538594] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.538681] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.538689] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.538693] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.538707] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.538734] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
[ 1.538779] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.538784] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.538787] usb usb2: Product: UHCI Host Controller
[ 1.538790] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.538792] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.538889] usb usb2: configuration #1 chosen from 1 choice
[ 1.538931] hub 2-0:1.0: USB hub found
[ 1.538942] hub 2-0:1.0: 2 ports detected
[ 1.539272] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 1.539280] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.539284] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.539295] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.539329] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
[ 1.539369] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.539373] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.539376] usb usb3: Product: UHCI Host Controller
[ 1.539379] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.539382] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.539506] usb usb3: configuration #1 chosen from 1 choice
[ 1.539587] hub 3-0:1.0: USB hub found
[ 1.539597] hub 3-0:1.0: 2 ports detected
[ 1.539655] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.539663] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.539666] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.539677] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.539710] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 1.539753] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.539757] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.539760] usb usb4: Product: UHCI Host Controller
[ 1.539763] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.539765] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.539886] usb usb4: configuration #1 chosen from 1 choice
[ 1.539972] hub 4-0:1.0: USB hub found
[ 1.539982] hub 4-0:1.0: 2 ports detected
[ 1.540056] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.540063] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.540067] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.540077] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.540109] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
[ 1.540147] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.540151] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.540154] usb usb5: Product: UHCI Host Controller
[ 1.540157] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.540160] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.540280] usb usb5: configuration #1 chosen from 1 choice
[ 1.540364] hub 5-0:1.0: USB hub found
[ 1.540374] hub 5-0:1.0: 2 ports detected
[ 1.540821] ata6: port disabled. ignoring.
[ 1.720522] ata5.00: ATA-5: IC35L040AVVA07-0, VA2OA51A, max UDMA/100
[ 1.720528] ata5.00: 78165360 sectors, multi 8: LBA
[ 1.720573] ata5.01: ATAPI: COMPAQ DVD-ROM GDR8160B, 0012, max UDMA/44
[ 1.744426] ata5.00: configured for UDMA/100
[ 1.776219] ata5.01: configured for UDMA/44
[ 1.856018] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.856036] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.860015] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.860031] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.876148] scsi 4:0:0:0: Direct-Access ATA IC35L040AVVA07-0 VA2O PQ: 0 ANSI: 5
[ 1.891555] scsi 4:0:1:0: CD-ROM COMPAQ DVD-ROM GDR8160B 0012 PQ: 0 ANSI: 5
[ 1.916478] sd 4:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.916558] sd 4:0:0:0: [sda] Write Protect is off
[ 1.916562] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.916595] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.916774] sda: sda1 sda2 < sda5 >
[ 1.944183] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.962249] sr0: scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray
[ 1.962255] Uniform CD-ROM driver Revision: 3.20
[ 1.962364] sr 4:0:1:0: Attached scsi CD-ROM sr0
[ 1.973098] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 1.973552] sr 4:0:1:0: Attached scsi generic sg1 type 5
[ 2.248734] device-mapper: uevent: version 1.0.3
[ 2.249350] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 2.487401] PM: Starting manual resume from disk
[ 2.487407] PM: Resume from partition 254:1
[ 2.487409] PM: Checking hibernation image.
[ 2.487561] PM: Error -22 checking image file
[ 2.487564] PM: Resume from disk failed.
[ 2.532490] kjournald starting. Commit interval 5 seconds
[ 2.532501] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.796019] udev[329]: starting version 164
[ 4.109181] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 4.302930] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 4.303048] ACPI: Power Button [VBTN]
[ 4.303180] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.303255] ACPI: Power Button [PWRF]
[ 4.304328] processor LNXCPU:00: registered as cooling_device0
[ 4.354822] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 4.457297] parport_pc 00:08: reported by Plug and Play ACPI
[ 4.457354] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 4.699645] intel_rng: Firmware space is locked read-only. If you can't or
[ 4.699648] intel_rng: don't want to disable this in firmware setup, and if
[ 4.699650] intel_rng: you are certain that your system has a functional
[ 4.699652] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 4.703258] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.809081] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 4.958137] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.958175] Intel ICH 0000:00:1e.2: setting latency timer to 64
[ 5.018560] [drm] Initialized drm 1.1.0 20060810
[ 5.131484] [drm] radeon kernel modesetting enabled.
[ 5.131545] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.131552] radeon 0000:01:00.0: setting latency timer to 64
[ 5.133760] [drm] radeon: Initializing kernel modesetting.
[ 5.133869] [drm] register mmio base: 0xDFDE0000
[ 5.133872] [drm] register mmio size: 65536
[ 5.134175] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 5.134192] [drm] Generation 2 PCI interface, using max accessible memory
[ 5.134196] [drm] radeon: VRAM 128M
[ 5.134198] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[ 5.134201] [drm] radeon: GTT 512M
[ 5.134203] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[ 5.134250] radeon 0000:01:00.0: irq 27 for MSI/MSI-X
[ 5.134257] radeon 0000:01:00.0: radeon: using MSI.
[ 5.134279] [drm] radeon: irq initialized.
[ 5.134854] [drm] Detected VRAM RAM=128M, BAR=128M
[ 5.134858] [drm] RAM width 64bits DDR
[ 5.134936] [TTM] Zone kernel: Available graphics memory: 445500 kiB.
[ 5.134939] [TTM] Zone highmem: Available graphics memory: 516440 kiB.
[ 5.134960] [drm] radeon: 128M of VRAM memory ready
[ 5.134963] [drm] radeon: 512M of GTT memory ready.
[ 5.134978] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.135848] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 5.135900] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 5.135910] [drm] radeon: cp idle (0x10000C03)
[ 5.135954] [drm] Loading R300 Microcode
[ 5.136398] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 5.156251] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[ 5.156292] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[ 5.156330] radeon 0000:01:00.0: failled initializing CP (-2).
[ 5.156366] radeon 0000:01:00.0: Disabling GPU acceleration
[ 5.156405] [drm] radeon: cp finalized
[ 5.156450] radeon 0000:01:00.0: f6fef400 unpin not necessary
[ 5.156897] [drm] Default TV standard: NTSC
[ 5.156900] [drm] 27.000000000 MHz TV ref clk
[ 5.156904] [drm] DFP table revision: 4
[ 5.156962] [drm] Default TV standard: NTSC
[ 5.156965] [drm] 27.000000000 MHz TV ref clk
[ 5.157001] [drm] Radeon Display Connectors
[ 5.157004] [drm] Connector 0:
[ 5.157006] [drm] VGA
[ 5.157009] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 5.157011] [drm] Encoders:
[ 5.157013] [drm] CRT1: INTERNAL_DAC1
[ 5.157016] [drm] Connector 1:
[ 5.157017] [drm] DVI-I
[ 5.157019] [drm] HPD1
[ 5.157022] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 5.157024] [drm] Encoders:
[ 5.157025] [drm] CRT2: INTERNAL_DAC2
[ 5.157028] [drm] DFP1: INTERNAL_TMDS1
[ 5.157029] [drm] Connector 2:
[ 5.157031] [drm] S-video
[ 5.157033] [drm] Encoders:
[ 5.157035] [drm] TV1: INTERNAL_DAC2
[ 5.301145] [drm] fb mappable at 0xD0040000
[ 5.301149] [drm] vram apper at 0xD0000000
[ 5.301152] [drm] size 3145728
[ 5.301154] [drm] fb depth is 24
[ 5.301156] [drm] pitch is 4096
[ 5.352459] AC'97 0 analog subsections not ready
[ 5.364331] intel8x0: white list rate for 1028:0177 is 48000
[ 5.376478] Console: switching to colour frame buffer device 128x48
[ 5.380389] fb0: radeondrmfb frame buffer device
[ 5.380392] registered panic notifier
[ 5.380400] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 6.020354] EXT3 FS on dm-0, internal journal
[ 6.202469] loop: module loaded
[ 6.902135] Adding 2015224k swap on /dev/mapper/home-swap_1. Priority:-1 extents:1 across:2015224k
[ 8.465890] kjournald starting. Commit interval 5 seconds
[ 8.466073] EXT3 FS on dm-5, internal journal
[ 8.466079] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.507788] kjournald starting. Commit interval 5 seconds
[ 8.507935] EXT3 FS on dm-4, internal journal
[ 8.507940] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.562590] kjournald starting. Commit interval 5 seconds
[ 8.562759] EXT3 FS on dm-2, internal journal
[ 8.562764] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.616836] kjournald starting. Commit interval 5 seconds
[ 8.617005] EXT3 FS on dm-3, internal journal
[ 8.617011] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.981199] fuse init (API version 7.13)
[ 14.235640] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.802611] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 15.802615] tg3: eth0: Flow control is off for TX and off for RX.
[ 15.802773] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.571192] lp0: using parport0 (interrupt-driven).
[ 16.754572] ppdev: user-space parallel port driver
[ 26.488009] eth0: no IPv6 routers present
[ 128.791219] CPU0 attaching NULL sched-domain.
[ 128.791279] CPU0 attaching NULL sched-domain.
[ 181.368013] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 181.500825] usb 1-2: New USB device found, idVendor=0781, idProduct=5530
[ 181.500829] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 181.500833] usb 1-2: Product: Cruzer
[ 181.500835] usb 1-2: Manufacturer: SanDisk
[ 181.500838] usb 1-2: SerialNumber: 20042103200ED8A31CE9
[ 181.501579] usb 1-2: configuration #1 chosen from 1 choice
[ 181.575621] Initializing USB Mass Storage driver...
[ 181.575739] scsi6 : SCSI emulation for USB Mass Storage devices
[ 181.575900] usbcore: registered new interface driver usb-storage
[ 181.575905] USB Mass Storage support registered.
[ 181.587638] usb-storage: device found at 2
[ 181.587642] usb-storage: waiting for device to settle before scanning
[ 186.584178] usb-storage: device scan complete
[ 186.584787] scsi 6:0:0:0: Direct-Access SanDisk Cruzer 1.00 PQ: 0 ANSI: 2
[ 186.586155] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 186.587032] sd 6:0:0:0: [sdb] 7837696 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 186.596622] sd 6:0:0:0: [sdb] Write Protect is off
[ 186.596629] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 186.596632] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 186.599653] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 186.599659] sdb: sdb1
[ 186.612185] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 186.612193] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 196.475543] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Module Size Used by
nls_utf8 908 0
nls_cp437 4489 0
vfat 6534 0
fat 34776 1 vfat
usb_storage 30797 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
cpufreq_userspace 1444 0
cpufreq_conservative 4018 0
ppdev 4058 0
lp 5570 0
fuse 44052 1
ext2 46109 1
loop 9729 0
radeon 511356 2
ttm 33258 1 radeon
drm_kms_helper 18533 1 radeon
drm 111844 4 radeon,ttm,drm_kms_helper
snd_intel8x0 19595 2
snd_ac97_codec 79148 1 snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
i2c_algo_bit 3497 1 radeon
snd_pcm 47226 2 snd_intel8x0,snd_ac97_codec
snd_seq 35327 0
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 1 snd_seq
i2c_i801 6462 0
rng_core 2178 0
i2c_core 12751 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
snd 34387 10 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 3450 1 snd
parport_pc 15799 1
parport 22554 3 ppdev,lp,parport_pc
snd_page_alloc 4977 2 snd_intel8x0,snd_pcm
dcdbas 3860 0
button 3598 0
processor 26259 0
psmouse 44777 0
pcspkr 1207 0
evdev 5609 10
serio_raw 2916 0
ext3 93944 5
jbd 31965 1 ext3
mbcache 3762 2 ext2,ext3
dm_mod 45842 18
sg 19905 0
sr_mod 10770 0
cdrom 26487 1 sr_mod
sd_mod 25937 3
crc_t10dif 1012 1 sd_mod
ata_generic 2247 0
uhci_hcd 15989 0
tg3 88133 0
thermal 9206 0
ata_piix 17704 2
ahci 27378 0
thermal_sys 9378 2 processor,thermal
libphy 11606 1 tg3
ehci_hcd 28453 0
libata 115617 3 ata_generic,ata_piix,ahci
scsi_mod 104593 5 usb_storage,sg,sr_mod,sd_mod,libata
usbcore 98613 4 usb_storage,uhci_hcd,ehci_hcd
nls_base 4541 5 nls_utf8,nls_cp437,vfat,fat,usbcore
