Hello Antonio, additionally, I had to disable AppArmor, otherwise pppd couldn't even read /etc/resolv.conf. Thanks for help and patience! Regards Ludwig -------- Original-Nachricht -------- > Datum: Sun, 28 Aug 2011 08:51:13 -0500 > Von: Antonio Olivares <olivares14031@xxxxxxxxx> > An: Ludwig Gebauer <ludwiggebauer@xxxxxxx> > CC: discuss@xxxxxxxxxxxxx > Betreff: Re: Fwd: Re: Re: Re: Ludwig Gebauer, Germany, openSUSE 11.4 "Celadon" - Kernel kernel 2.6.37.1-1.2-desktop > Ludwig, > > Become root, and open an editor and add the nameservers to > /etc/resolv.conf. That or become root user > > $ su - > passwd: > > --> primary DNS address 195.129.111.50 > --> secondary DNS address 195.129.111.49 > > # echo "nameserver 195.129.11.50" >> /etc/resolv.conf > # echo "nameserver 195.129.11.49" >> /etc/resolv.conf > > If these numbers change, just use the ones that come up when you are > connected: > > ATDT019193790 > CONNECT 45333 > > For some reason or another, wvdial whether Auto DNS = 1 is used or > not, the file /etc/resolv.conf is not updated. Just add them manually > and you should be able to browse. > > Regards, > > Antonio > > > On Sun, Aug 28, 2011 at 8:39 AM, Ludwig Gebauer <ludwiggebauer@xxxxxxx> > wrote: > > Seems to be a never ending story. > > > > slmodemd does not work with SuSE 11.4 "*-desktop" kernels, neither 64 > nor 32 bit. Neither with precompiled nor with selfcompiled (in 32 bit) > versions of slmodemd. Reason seems to be SuSE's questionable hack with shorter > timeslices, which tends to make the system react faster, but to work > slower, see (sorry, found it only in german): > > > > http://de.opensuse.org/SDB:Meldung_No_Carrier_mit_Winmodem-Treiber > > > http://de.opensuse.org/SDB:SuSE_Linux_9.0_/_Interaktivit%C3%A4t_ausgleichen > > > > Deleted in SuSE 11.4 32 bit the *-desktop" kernel and installed instead > the "*-default" kernel (in 64 bit not yet tested). > > slmodemd works now, the cryptic message "error: sched_setscheduler: > Operation not permitted" disappeared. > > > > Now wvdial works, but browsing fails: > > > > # wvdial > > --> WvDial: Internet dialer version 1.60 > > --> Cannot get information for serial port. > > --> Initializing modem. > > --> Sending: ATZ > > ATZ > > OK > > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > OK > > --> Modem initialized. > > --> Idle Seconds = 300, disabling automatic reconnect. > > --> Sending: ATDT019193790 > > --> Waiting for carrier. > > ATDT019193790 > > CONNECT 45333 > > --> Carrier detected. Starting PPP immediately. > > --> Starting pppd at Sun Aug 28 13:58:06 2011 > > --> Pid of pppd: 8640 > > --> Using interface ppp0 > > --> local IP address 149.225.64.80 > > --> remote IP address 139.4.248.3 > > --> primary DNS address 195.129.111.50 > > --> secondary DNS address 195.129.111.49 > > --> Script /etc/ppp/ip-up run successful > > --> Default route Ok. > > --> warning, no nameserver found `/etc/resolv.conf` > > --> Nameserver (DNS) failure, the connection may not work. > > --> Connected... Press Ctrl-C to disconnect > > > > Yes, in wvdialconf is "Auto DNS = 1" > > > > (With "Auto DNS = 0" the two lines "primary DNS adress..." and > "secondary DNS adress..." are missing). > > > > Though this seems to be no more a modem problem, but a problem of pppd, > I would appreciate some help. > > > > Regards > > Ludwig > > > > > > > > -------- Original-Nachricht -------- > > Datum: Wed, 17 Aug 2011 18:36:38 +0200 > > Von: "Ludwig Gebauer" <ludwiggebauer@xxxxxxx> > > An: discuss@xxxxxxxxxxxxx > > Betreff: Fwd: Re: Re: Re: Ludwig Gebauer, Germany, openSUSE 11.4 > "Celadon" - Kernel kernel 2.6.37.1-1.2-desktop > > > > Antonio, > > > > for completeness: > > > > linux-k7za:~ # slmodemd -d -c GERMANY --alsa hw:0,6 > > SmartLink Soft Modem: version 2.9.11 Aug 9 2011 14:15:04 > > <509.933718> SmartLink Soft Modem: version 2.9.11 Aug 9 2011 14:15:04 > > <509.933749> hw:0,6: startup modem... > > <509.934052> hw:0,6: update termios... > > symbolic link `/dev/ttySL0' -> `/dev/pts/2' created. > > modem `hw:0,6' created. TTY is `/dev/pts/2' > > <509.934183> open file: /var/lib/slmodem/data.hw:0,6... > > <509.934213> cannot open '/var/lib/slmodem/data.hw:0,6': No such file or > directory > > error: sched_setscheduler: Operation not permitted > > <509.935465> main: rt applyed: SCHED_FIFO, pri 99 > > Use `/dev/ttySL0' as modem device, Ctrl+C for termination. > > <520.213998> main: termios changed. > > <520.214021> hw:0,6: update termios... > > <520.274303> main: termios changed. > > <520.274325> hw:0,6: update termios... > > <520.376343> hw:0,6: run cmd: ATZ > > <520.376363> hw:0,6: modem reset... > > <520.376368> hw:0,6: modem set state: 1 --> 1... > > <520.376375> hw:0,6: modem set mode: -> 0... > > <520.376381> hw:0,6: modem report result: 0 (OK) > > <520.478372> hw:0,6: run cmd: ATQ0V1E1S0=0X3&C1&D2+MS=90 > > <520.478405> hw:0,6: modem report result: 0 (OK) > > <520.580350> hw:0,6: run cmd: ATDT019193790 > > <520.580378> hw:0,6: modem dial: T019193790... > > <520.580384> hw:0,6: modem_dial_start... > > <520.580412> hw:0,6: modem_start.. > > <520.580417> hw:0,6: modem set state: 1 --> 2... > > <520.580423> hw:0,6: new state: DP_ESTAB > > <520.580427> main: alsa_ioctl: cmd 8, arg 3... > > <520.580432> hw:0,6: modem set hook: 0 --> 1... > > <520.580437> main: alsa_ioctl: cmd 2, arg 1... > > <520.580549> main: alsa_ioctl: cmd 11, arg 0... > > <520.580597> main: alsa_ioctl: cmd 4, arg 2580... > > <520.580603> main: alsa_ioctl: cmd 7, arg 30... > > <520.580608> main: alsa_start... > > Hardware PCM card 0 'HDA Intel' device 6 subdevice 0 > > Its setup is: > > stream : PLAYBACK > > access : RW_INTERLEAVED > > format : S16_LE > > subformat : STD > > channels : 1 > > rate : 9600 > > exact rate : 9600 (9600/1) > > msbits : 16 > > buffer_size : 2048 > > period_size : 64 > > period_time : 6666 > > tstamp_mode : NONE > > period_step : 1 > > avail_min : 64 > > period_event : 0 > > start_threshold : 2147483647 > > stop_threshold : 2048 > > silence_threshold: 0 > > silence_size : 0 > > boundary : 1073741824 > > appl_ptr : 0 > > hw_ptr : 0 > > Hardware PCM card 0 'HDA Intel' device 6 subdevice 0 > > Its setup is: > > stream : CAPTURE > > access : RW_INTERLEAVED > > format : S16_LE > > subformat : STD > > channels : 1 > > rate : 9600 > > exact rate : 9600 (9600/1) > > msbits : 16 > > buffer_size : 2048 > > period_size : 64 > > period_time : 6666 > > tstamp_mode : NONE > > period_step : 1 > > avail_min : 64 > > period_event : 0 > > start_threshold : 2147483647 > > stop_threshold : 2048 > > silence_threshold: 0 > > silence_size : 0 > > boundary : 1073741824 > > appl_ptr : 0 > > hw_ptr : 0 > > <520.582928> main: startup write: 384... > > <520.653022> main: alsa xrun: try to recover... > > <520.653318> main: alsa xrun: recovered. > > <520.653325> main: dev read = 0 > > <520.654040> main: alsa xrun: try to recover... > > <520.654361> main: alsa xrun: recovered. > > <520.654367> main: dev write = 0 > > <520.655069> main: alsa xrun: try to recover... > > <520.655387> main: alsa xrun: recovered. > > <520.655394> main: dev write = 0 > > <520.656109> main: alsa xrun: try to recover... > > <520.656829> main: alsa xrun: recovered. > > <520.656851> main: dev write = 0 > > <520.656881> main: alsa xrun: try to recover... > > <520.657196> main: alsa xrun: recovered. > > <520.657202> main: dev read = 0 > > <520.658040> main: alsa xrun: try to recover... > > <520.658449> main: alsa xrun: recovered. > > <520.658464> main: dev write = 0 > > <520.659177> main: alsa xrun: try to recover... > > <520.659555> main: alsa xrun: recovered. > > <520.659570> main: dev write = 0 > > <520.659609> main: alsa xrun: try to recover... > > <520.659923> main: alsa xrun: recovered. > > <520.659929> main: dev read = 0 > > <520.660771> main: alsa xrun: try to recover... > > <520.661093> main: alsa xrun: recovered. > > <520.661099> main: dev write = 0 > > <520.661922> main: alsa xrun: try to recover... > > <520.662237> main: alsa xrun: recovered. > > <520.662242> main: dev write = 0 > > <520.663079> main: alsa xrun: try to recover... > > <520.663448> main: alsa xrun: recovered. > > <520.663462> main: dev write = 0 > > <520.664173> main: alsa xrun: try to recover... > > <520.664572> main: alsa xrun: recovered. > > <520.664587> main: dev write = 0 > > <520.665385> main: alsa xrun: try to recover... > > <520.665719> main: alsa xrun: recovered. > > <520.665724> main: dev write = 0 > > <520.666534> main: alsa xrun: try to recover... > > <520.666862> main: alsa xrun: recovered. > > <520.666868> main: dev write = 0 > > <520.667680> main: alsa xrun: try to recover... > > <520.668008> main: alsa xrun: recovered. > > <520.668013> main: dev write = 0 > > <520.668812> main: alsa xrun: try to recover... > > <520.669139> main: alsa xrun: recovered. > > <520.669144> main: dev write = 0 > > <520.669191> main: alsa xrun: try to recover... > > <520.669614> main: alsa xrun: recovered. > > <520.669629> main: dev read = 0 > > <520.670447> main: alsa xrun: try to recover... > > <520.670780> main: alsa xrun: recovered. > > <520.670786> main: dev write = 0 > > <520.671620> main: alsa xrun: try to recover... > > <520.671949> main: alsa xrun: recovered. > > <520.671954> main: dev write = 0 > > <520.671984> main: alsa xrun: try to recover... > > <520.672421> main: alsa xrun: recovered. > > <520.672431> main: dev read = 0 > > <520.673117> main: alsa xrun: try to recover... > > <520.673532> main: alsa xrun: recovered. > > <520.673546> main: dev write = 0 > > <520.674256> main: alsa xrun: try to recover... > > <520.674698> main: alsa xrun: recovered. > > <520.674713> main: dev write = 0 > > <520.675527> main: alsa xrun: try to recover... > > <520.675841> main: alsa xrun: recovered. > > <520.675846> main: dev write = 0 > > <520.676647> main: alsa xrun: try to recover... > > <520.676966> main: alsa xrun: recovered. > > <520.676971> main: dev write = 0 > > <520.677784> main: alsa xrun: try to recover... > > <520.678112> main: alsa xrun: recovered. > > <520.678117> main: dev write = 0 > > <520.678932> main: alsa xrun: try to recover... > > <520.679257> main: alsa xrun: recovered. > > <520.679263> main: dev write = 0 > > <520.679420> main: alsa xrun: try to recover... > > <520.679740> main: alsa xrun: recovered. > > <520.679745> main: dev read = 0 > > <520.680572> main: alsa xrun: try to recover... > > <520.680910> main: alsa xrun: recovered. > > <520.680916> main: dev write = 0 > > <520.680962> main: alsa xrun: try to recover... > > <520.681409> main: alsa xrun: recovered. > > <520.681482> main: dev read = 0 > > <520.681526> main: alsa xrun: try to recover... > > <520.681846> main: alsa xrun: recovered. > > <520.681852> main: dev read = 0 > > <520.681880> main: alsa xrun: try to recover... > > <520.682195> main: alsa xrun: recovered. > > <520.682200> main: dev read = 0 > > <520.683121> main: alsa xrun: try to recover... > > <520.683531> main: alsa xrun: recovered. > > <520.683546> main: dev write = 0 > > <520.683840> hw:0,6: modem_update_status: 16 > > <520.683848> hw:0,6: --> FINISH. > > <520.683852> hw:0,6: modem_hup... > > <520.683856> hw:0,6: modem set state: 2 --> 9... > > <520.683862> hw:0,6: new state: DP_DISC > > <520.683878> hw:0,6: modem_update_status: 16 > > <520.683883> hw:0,6: --> FINISH. > > <520.683887> hw:0,6: modem_hup... > > <520.683903> hw:0,6: modem_update_status: 16 > > <520.683907> hw:0,6: --> FINISH. > > <520.683912> hw:0,6: modem_hup... > > <520.683927> hw:0,6: modem_update_status: 16 > > <520.683932> hw:0,6: --> FINISH. > > <520.683936> hw:0,6: modem_hup... > > <520.683952> hw:0,6: modem_update_status: 16 > > <520.683956> hw:0,6: --> FINISH. > > <520.683960> hw:0,6: modem_hup... > > <520.683976> hw:0,6: modem_update_status: 16 > > <520.683981> hw:0,6: --> FINISH. > > <520.683985> hw:0,6: modem_hup... > > <520.684001> hw:0,6: modem_update_status: 16 > > <520.684005> hw:0,6: --> FINISH. > > <520.684009> hw:0,6: modem_hup... > > <520.684025> hw:0,6: modem_update_status: 16 > > <520.684030> hw:0,6: --> FINISH. > > <520.684034> hw:0,6: modem_hup... > > <520.684050> hw:0,6: modem_update_status: 16 > > <520.684054> hw:0,6: --> FINISH. > > <520.684058> hw:0,6: modem_hup... > > <520.684074> hw:0,6: modem_update_status: 16 > > <520.684079> hw:0,6: --> FINISH. > > <520.684082> hw:0,6: modem_hup... > > <520.684099> hw:0,6: modem_update_status: 16 > > <520.684104> hw:0,6: --> FINISH. > > <520.684108> hw:0,6: modem_hup... > > <520.684123> hw:0,6: modem_update_status: 16 > > <520.684128> hw:0,6: --> FINISH. > > <520.684132> hw:0,6: modem_hup... > > <520.684148> hw:0,6: modem_update_status: 16 > > <520.684153> hw:0,6: --> FINISH. > > <520.684157> hw:0,6: modem_hup... > > <520.684172> hw:0,6: modem_update_status: 16 > > <520.684177> hw:0,6: --> FINISH. > > <520.684181> hw:0,6: modem_hup... > > <520.684197> hw:0,6: modem_update_status: 16 > > <520.684201> hw:0,6: --> FINISH. > > <520.684205> hw:0,6: modem_hup... > > <520.684221> hw:0,6: modem_update_status: 16 > > <520.684226> hw:0,6: --> FINISH. > > <520.684230> hw:0,6: modem_hup... > > <520.684245> hw:0,6: modem_update_status: 16 > > <520.684250> hw:0,6: --> FINISH. > > <520.684254> hw:0,6: modem_hup... > > <520.684897> hw:0,6: modem_update_status: 16 > > <520.684910> hw:0,6: --> FINISH. > > <520.684914> hw:0,6: modem_hup... > > <520.684930> hw:0,6: modem_update_status: 16 > > <520.684935> hw:0,6: --> FINISH. > > <520.684939> hw:0,6: modem_hup... > > <520.684955> hw:0,6: modem_update_status: 16 > > <520.684959> hw:0,6: --> FINISH. > > <520.684963> hw:0,6: modem_hup... > > <520.684979> hw:0,6: modem_update_status: 16 > > <520.684984> hw:0,6: --> FINISH. > > <520.684988> hw:0,6: modem_hup... > > <520.685004> hw:0,6: modem_update_status: 16 > > <520.685008> hw:0,6: --> FINISH. > > <520.685012> hw:0,6: modem_hup... > > <520.685028> hw:0,6: modem_update_status: 16 > > <520.685033> hw:0,6: --> FINISH. > > <520.685037> hw:0,6: modem_hup... > > <520.685053> hw:0,6: modem_update_status: 16 > > <520.685057> hw:0,6: --> FINISH. > > <520.685061> hw:0,6: modem_hup... > > <520.685077> hw:0,6: modem_update_status: 16 > > <520.685081> hw:0,6: --> FINISH. > > <520.685085> hw:0,6: modem_hup... > > <520.685101> hw:0,6: modem_update_status: 16 > > <520.685106> hw:0,6: --> FINISH. > > <520.685110> hw:0,6: modem_hup... > > <520.685126> hw:0,6: modem_update_status: 16 > > <520.685130> hw:0,6: --> FINISH. > > <520.685134> hw:0,6: modem_hup... > > <520.685150> hw:0,6: modem_update_status: 16 > > <520.685155> hw:0,6: --> FINISH. > > <520.685159> hw:0,6: modem_hup... > > <520.685164> hw:0,6: modem_stop.. > > <520.685168> main: alsa_stop... > > <520.685204> hw:0,6: modem set hook: 1 --> 0... > > <520.685211> main: alsa_ioctl: cmd 2, arg 0... > > <520.685781> main: alsa_ioctl: cmd 8, arg 0... > > <520.685806> hw:0,6: modem set state: 9 --> 1... > > <520.685817> hw:0,6: new state: MODEM_IDLE > > <520.685822> hw:0,6: modem report result: 6 (NO DIALTONE) > > <520.685831> main: dev write = 0 > > <520.787483> main: termios changed. > > <520.787509> hw:0,6: update termios... > > <520.787541> main: pty closed. > > ^C<540.854338> main: signal 2: mark termination. > > <540.854375> hw:0,6: modem_delete... > > > > > > > > linux-k7za:~ # wvdial > > --> WvDial: Internet dialer version 1.60 > > --> Cannot get information for serial port. > > --> Initializing modem. > > --> Sending: ATZ > > ATZ > > OK > > --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 > > ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 > > OK > > --> Modem initialized. > > --> Idle Seconds = 300, disabling automatic reconnect. > > --> Sending: ATDT019193790 > > --> Waiting for carrier. > > ATDT019193790 > > NO DIALTONE > > --> No dial tone. > > --> Disconnecting at Wed Aug 17 18:12:00 2011 > > > > > > Regards > > Ludwig > > > > > > > > -------- Original-Nachricht -------- > > Datum: Mon, 15 Aug 2011 10:47:19 +0200 > > Von: "Ludwig Gebauer" <ludwiggebauer@xxxxxxx> > > An: discuss@xxxxxxxxxxxxx > > Betreff: Re: Re: Re: Ludwig Gebauer, Germany, openSUSE 11.4 "Celadon" - > Kernel kernel 2.6.37.1-1.2-desktop > > > > Antonio, > > > > yes, I did read the documentation contained in > SLMODEMD_gcc4.5_alsa1.0.24.tar.gz :-)) > > > > Yes, I tried that Init2 string > > Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS90 > > and monitored the phone line with a voltmeter and high impedance > (crystal) earphones. Same result: The modem takes up the phone and hangs it up > immediately, doesn't dial. > > > > Regards > > Ludwig > > > > -------- Original-Nachricht -------- > >> Datum: Sun, 14 Aug 2011 12:19:31 -0500 > >> Von: Antonio Olivares <olivares14031@xxxxxxxxx> > >> An: Ludwig Gebauer <ludwiggebauer@xxxxxxx> > >> CC: discuss@xxxxxxxxxxxxx > >> Betreff: Re: Re: Re: Ludwig Gebauer, Germany, openSUSE 11.4 "Celadon" - > Kernel kernel 2.6.37.1-1.2-desktop > > > >> Ludwig, > >> > >> Try editing your /etc/wvdial.conf file and change Init 2 as follows: > >> > >> sample Init 2 line: > >> > >> Modem = /dev/ttySL0 > >> Baud = 460800 > >> Init = ATZ > >> Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS90 > >> ISDN = 0 > >> Modem Type = Analog Modem > >> Phone = YOUR_ISP_PHONE_NUMBER_GOES_HERE > >> Username = YOUR_USERNAME > >> Password = YOUR_PASSWORD > >> Carrier Check = no > >> Stupid Mode = yes > >> > >> Try that and report back. > >> > >> Regards, > >> > >> Antonio > >> > >> > >> > >> On Sun, Aug 14, 2011 at 12:08 PM, Ludwig Gebauer > <ludwiggebauer@xxxxxxx> > >> wrote: > >> > Marvin, > >> > > >> > thank you very much. > >> > > >> > Now the modem shows some reaction, but no real success: Wvdial exits > >> with a happy "NO DIALTONE". A shot dip in phone line voltage indicates, > that > >> the modem picks up the phone, but immediately hangs it up again, before > any > >> telephone provider might have a chance to send a dialtone. The hardware > >> seems o.k.; I am posting via the same hardware and phone line under > SuSE 10.3. > >> > > >> > Fiddling with drivers (Removing oss-drivers, inserting available > >> snd_intel_*-drivers) and wvdial.conf settings (Reduced baudrate, dial > without > >> waiting for dialtone, etc.) brought no change. > >> > > >> > Suspicious: > >> > > >> > linux-k7za:~ # slmodemd -c GERMANY --alsa hw:0,6 > >> > SmartLink Soft Modem: version 2.9.11 Aug 9 2011 14:15:04 > >> > symbolic link `/dev/ttySL0' -> `/dev/pts/2' created. > >> > modem `hw:0,6' created. TTY is `/dev/pts/2' > >> > error: sched_setscheduler: Operation not permitted > >> > Use `/dev/ttySL0' as modem device, Ctrl+C for termination. > >> > > >> > Whitch Operation?? I suspected a priority problem, invoced slmodend > with > >> nice -20, but no change. > >> > > >> > Also suspicious: > >> > > >> > linux-k7za:~ # dmesg > >> > . > >> > . > >> > [ 536.642852] hda-intel: IRQ timing workaround is activated for > card > >> #0. Suggest a bigger bdl_pos_adj. > >> > > >> > Regards > >> > Ludwig -- Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de
