Jeffery For your USB modem the linuxant package dgcmodem_1.13_i386.deb.zip is most appropriate. I just ran the compiile on my system: 2.6.38-11-generic #48-Ubuntu SMP Fri Jul 29 19:05:14 UTC 2011 i686 i686 i386 GNU/Linux and all was OK. MarvS On Sat, Aug 27, 2011 at 2:47 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> wrote: > Antonio, here's what I get - do these correspond? > > uname -a > Linux whiskeybisquit-VGN-N130G 2.6.38-11-generic #48-Ubuntu SMP Fri Jul 29 > 19:05:14 UTC 2011 i686 i686 i386 GNU/Linux > > gcc --version > gcc (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2 > Copyright (C) 2010 Free Software Foundation, Inc. > > I'll gladly reinstall anything! and will look at your other options as well. > Thanks, > > Jeffrey > - - - - - - > > Jeffrey, > > On Sat, Aug 27, 2011 at 11:42 AM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> > wrote: > >> Good morning Antonio! I found something from you about the USRobotics >> USR5637 USB modem, and I'm assuming that DIDN'T work out on Ubuntu 11.04? >> I >> don't find anything on the web that confirms that any other USB modem does >> work. Or a replacement internal one for the VAIO? >> >> I'm reluctant to install an older Ubuntu version as you suggest Marv as >> sooner or later it would not be supported, because it would take so much >> time to go back and forth unless one version can be accessed within >> another >> (at home I have only dial-up and use it many times each day) and because >> of >> a potential problem with Thunderbird: due to family needs I go between the >> 2 >> laptops (I can check email via wifi when not at home), must keep my >> Thunderbird profile on an external drive, and the profile has been >> severely >> compromised when accessed through different systems/versions (I'd like to >> have the latest Ubuntu on both machines, and do need to use both to run >> ALL >> of my software). If it were for the occasional fax, this option would be >> fine. >> > > Maybe you can install an older kernel, for the meantime to give some > time for a fix. > >> >> So I'll assume that the message: >> no device detected by hsf driver - HDA modems may require reboot >> Note: HDA support not compiled in the driver >> >> ...leads me too a dead end. On both computers, alas. >> >> On this page: >> https://help.ubuntu.com/community/DialupModemHowto/Conexant >> shouldn't this link: >> For Ubuntu 11.04 (Natty Narwhal): You can follow the steps on this thread. >> : >> http://ubuntuforums.org/showthread.php?t=1781268 >> be removed? or why would it not work in my case? >> > > Might be due to some kernel problem* , kernel devel package/kernel > headers, some type of mismatch when I see the errors in the messages > that you have sent us: > > <quote> > alsa-driver-linuxant_1.0.23.1_all.deb: > ----in terminal: > Building modules for the 2.6.38-11-generic kernel, please wait... done. > ERROR: Build failed. Please review the build log at > /tmp/alsa-driver-linuxant.26528.log > dpkg: error processing alsa-driver-linuxant (--install): > subprocess installed post-installation script returned error exit status 2 > ----in log file: > checking for GCC version... Kernel compiler: Used compiler: gcc > (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2 > *** NO PREDEFINED KERNEL COMPILER IS DETECTED > *** Assuming the same compiler is used with the current system compiler. > *** Please make sure that the same compiler version was used for > building kernel. > and later... > /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function > ‘snd_pcm_hw_params’: > /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error: > implicit declaration of function ‘pm_qos_remove_requirement’ > /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:492:3: error: > implicit declaration of function ‘pm_qos_add_requirement’ > make[3]: *** [/usr/lib/alsa-driver-linuxant/acore/pcm_native.o] Error 1 > make[2]: *** [/usr/lib/alsa-driver-linuxant/acore] Error 2 > make[1]: *** [_module_/usr/lib/alsa-driver-linuxant] Error 2 > make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic' > make: *** [compile] Error 2 > </quote> > > This line ``*** NO PREDEFINED KERNEL COMPILER IS DETECTED > *** Assuming the same compiler is used with the current system compiler. > *** Please make sure that the same compiler version was used for > building kernel. > '' is the one that makes me believe that the running kernel is not the > same gcc as the one in the system. In this case and in others it is > important that the running kernel and the gcc be the same so that no > errors occurs. If you can you can confirm > > run > $ uname -a > and > $ gcc --version > > and that may tell us why things are not working. To get it working, > the kernel and the gcc must be the same. > > If you want and have access to a livecd like > Knoppix/Slax/Porteus/Puppy/..., you can use some of these at least to > get a connection to internet via dialup. Puppy in many cases has out > of box support for many winmodems. In porteus I have successfully > built some buildscripts to build a module that will make the modems > work. Some modems except the hsf/hcf modems since these are > proprietary, except for the 14 kbps one but that one many people would > get mad in the case that it is built(they would want full speed, and > it is a difficult to accomodate to many people*). One person built > such a module for slax, but I have no status for it as Slax has not > been updated for a while. Without screwing up your running system > and/or installing again you may try out one livecd(if you can get one) > and try the driver and see if you can make the modem work and connect > via dialup or install a kernel that matches gcc and try the fixes > again. > > * unless you have a Dell machine, then you can use the oem drivers and > you can get full speed on the modem. > > If you have a cell phone, you may also use it as a modem to connect to > internet. In ModemData.txt, there is a report you can see : > > If a cellphone is not detected, see > http://ubuntuforums.org/archive/index.php/t-878554.html > A sample report is: > http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html > > Don't get discouraged, a little bit of patience can go a long way. I > almost forgot, you can also virtualize a version of linux and with an > older kernel you can run an older installation along with your current > one and have a working dialup connection on that one with a working > driver. These are things you can take a look at. > > When there were no fixes for smartlink modem after kernel 2.6.30/31, I > used Slax livecd with older kernel to access the internet and then > later the fixes came along thanks to a person that figured things out. > You may try to do something similar and not be left without internet > for a fix to come in the meantime. Hang in there! You can do it. > > Regards, > > > > Antonio > >> >> I've much appreciated your advice - thanks! >> >> Jeff >> >> >> >> -----Original Message----- >> From: cohanjeffrey@xxxxxxx >> To: olivares14031@xxxxxxxxx; marvin.stodolsky@xxxxxxxxx; >> discuss@xxxxxxxxxxxxx; support@xxxxxxxxxxxx >> Sent: Fri, Aug 26, 2011 7:23 pm >> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >> >> Thank you Antonio and Marv - really appreciate it! >> >> After another full day I'll try to take your advice tomorrow Marv, and it >> seems from Ganton at >> http://ubuntuforums.org/showthread.php?t=1597605&page=4 >> that the most recent kernel that will work will be Ubuntu 10.10. Or could >> I >> buy an external modem on ebay that is said to work on Linux? If you have >> further ideas after reading what follows (especially, re "Warning: no >> device >> detected by hsf driver - HDA modems may require reboot" and "Note: HDA >> support not compiled in the driver"), I would be most grateful! >> >> Today I removed alsa-driver-linuxant and installed >> hsfmodem-7.80.02.06full, >> and got code similar to yours Antonio. >> >> But an "hsfconfig" resulted in (excerpts): >> Conexant HSF softmodem driver, version 7.80.02.06full >> When reporting a problem for the first time, please send >> us the file generated by "hsfconfig --dumpdiag". >> No pre-built modules for: Ubuntu-11.04 linux-2.6.38-11-generic i686-SMP >> ...and the punchline: >> ERROR: Module build failed! >> - - - >> buildlog excerpts: >> /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared here >> (not >> in a function) >> make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1 >> make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2 >> >> so I again did this: >> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in: >> - /usr/lib/hcfpcimodem/modules/osnvm.c >> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c >> replace .ioctl with .compat_ioctl in: >> - /usr/lib/hcfpcimodem/modules/osdiag.c >> >> and "hsfconfig" got... >> Warning: no device detected by hsf driver - HDA modems may require reboot >> Note: HDA support not compiled in the driver >> >> then I ran everything (whew!) from "Ganton's Avatar" at >> http://ubuntuforums.org/showthread.php?t=1781268 >> and again got exactly the same message with "hsfconfig" >> (issue not [SOLVED] as stated) >> >> with another hsfconfig, it asked >> Warning: existing driver modules found under: >> /lib/modules/2.6.38-11-generic/ >> Would you like to keep using them? [no] >> ...and I pressed [enter] >> but got similar results >> - - - (end of exploits for the day, besides a little blackberry >> picking)- >> - - - - - >> >> Thanks again for helping, >> >> Jeff >> >> >> >> -----Original Message----- >> From: Antonio Olivares <olivares14031@xxxxxxxxx> >> To: cohanjeffrey@xxxxxxx >> Cc: discuss@xxxxxxxxxxxxx; Linuxant support (Jonathan) >> <support@xxxxxxxxxxxx>; Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >> Sent: Thu, Aug 25, 2011 6:56 pm >> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >> >> >> >> >> Jeffrey, >> >> >> >> >> >> >> >> Something is strange. I try the package (hsf) and it runs for me, I >> >> >> >> can't find errors: >> >> >> >> >> >> >> >> [olivares@acer-aspire-1 hsfmodem-7.80.02.06full]$ su -c 'make install' >> >> >> >> Password: >> >> >> >> make[1]: Entering directory >> >> >> >> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/nvm' >> >> >> >> mkdir -m 755 -p cvt >> >> >> >> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >> >> >> >> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >> >> >> >> inf/hsfpcibasic2.inf | ./cvtinf.pl cvt/hsfpcibasic2; if [ -n >> >> >> >> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2 < "inf/hsf.cty"; >> >> >> >> else true; fi >> >> >> >> (cd cvt/hsfpcibasic2/Region && grep -v -l '*' *NAME | sed -e 's/^0//' >> >> >> >> -e 's/^0//' -e 's/_NAME$//' | tr ' >> ' ',' | sed -e 's/,$//' -e >> >> >> >> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfpcibasic2/COUNTRY_CODE_LIST >> >> >> >> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >> >> >> >> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >> >> >> >> inf/hsfpcibasic2smart.inf | ./cvtinf.pl cvt/hsfpcibasic2smart; if [ -n >> >> >> >> "" ]; then ./cvtinf.pl cvt/hsfpcibasic2smart < ""; else true; fi >> >> >> >> if [ -d cvt/hsfpcibasic2/Profile ]; then ln -sf >> >> >> >> ../hsfpcibasic2/Profile cvt/hsfpcibasic2smart/.; else true; fi >> >> >> >> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2smart/. >> >> >> >> (cd cvt/hsfpcibasic2smart/Region && grep -v -l '*' *NAME | sed -e >> >> >> >> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr ' >> ' ',' | sed -e 's/,$//' >> >> >> >> -e 's/^/"/' -e 's/$/"/' ; echo "") > >> >> >> >> cvt/hsfpcibasic2smart/COUNTRY_CODE_LIST >> >> >> >> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >> >> >> >> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >> >> >> >> inf/hsfpcibasic2hsfi.inf | ./cvtinf.pl cvt/hsfpcibasic2hsfi; if [ -n >> >> >> >> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2hsfi < >> >> >> >> "inf/hsf.cty"; else true; fi >> >> >> >> rm -rf cvt/hsfpcibasic2hsfi/Region >> >> >> >> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2hsfi/. >> >> >> >> (cd cvt/hsfpcibasic2hsfi/Region && grep -v -l '*' *NAME | sed -e >> >> >> >> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr ' >> ' ',' | sed -e 's/,$//' >> >> >> >> -e 's/^/"/' -e 's/$/"/' ; echo "") > >> >> >> >> cvt/hsfpcibasic2hsfi/COUNTRY_CODE_LIST >> >> >> >> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >> >> >> >> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >> >> >> >> inf/hsfpcibasic2bry.inf | ./cvtinf.pl cvt/hsfpcibasic2bry; if [ -n >> >> >> >> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2bry < "inf/hsf.cty"; >> >> >> >> else true; fi >> >> >> >> rm -rf cvt/hsfpcibasic2bry/Region >> >> >> >> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2bry/. >> >> >> >> (cd cvt/hsfpcibasic2bry/Region && grep -v -l '*' *NAME | sed -e >> >> >> >> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr ' >> ' ',' | sed -e 's/,$//' >> >> >> >> -e 's/^/"/' -e 's/$/"/' ; echo "") > >> >> >> >> cvt/hsfpcibasic2bry/COUNTRY_CODE_LIST >> >> >> >> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >> >> >> >> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >> >> >> >> inf/hsfpcibasic3.inf | ./cvtinf.pl cvt/hsfpcibasic3; if [ -n >> >> >> >> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic3 < "inf/hsf.cty"; >> >> >> >> else true; fi >> >> >> >> rm -rf cvt/hsfpcibasic3/Region >> >> >> >> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic3/. >> >> >> >> (cd cvt/hsfpcibasic3/Region && grep -v -l '*' *NAME | sed -e 's/^0//' >> >> >> >> -e 's/^0//' -e 's/_NAME$//' | tr ' >> ' ',' | sed -e 's/,$//' -e >> >> >> >> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfpcibasic3/COUNTRY_CODE_LIST >> >> >> >> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >> >> >> >> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >> >> >> >> inf/hsfmc97ich.inf | ./cvtinf.pl cvt/hsfmc97; if [ -n "" ]; then >> >> >> >> ./cvtinf.pl cvt/hsfmc97 < ""; else true; fi >> >> >> >> rm -f mc97/HW_ADAPTER_TYPE >> >> >> >> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfmc97/. >> >> >> >> ln -sf ../hsfpcibasic2smart/Region cvt/hsfmc97/. >> >> >> >> (cd cvt/hsfmc97/Region && grep -v -l '*' *NAME | sed -e 's/^0//' -e >> >> >> >> 's/^0//' -e 's/_NAME$//' | tr ' >> ' ',' | sed -e 's/,$//' -e 's/^/"/' >> >> >> >> -e 's/$/"/' ; echo "") > cvt/hsfmc97/COUNTRY_CODE_LIST >> >> >> >> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ali >> >> >> >> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ati >> >> >> >> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ich >> >> >> >> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97sis >> >> >> >> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97via >> >> >> >> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >> >> >> >> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >> >> >> >> inf/hsfcadmus2.inf | ./cvtinf.pl cvt/hsfcadmus2; if [ -n "" ]; then >> >> >> >> ./cvtinf.pl cvt/hsfcadmus2 < ""; else true; fi >> >> >> >> rm -f cadmus2/HW_ADAPTER_TYPE >> >> >> >> ln -sf ../hsfpcibasic2/Profile cvt/hsfcadmus2/. >> >> >> >> ln -sf ../hsfpcibasic2/Region cvt/hsfcadmus2/. >> >> >> >> (cd cvt/hsfcadmus2/Region && grep -v -l '*' *NAME | sed -e 's/^0//' >> >> >> >> -e 's/^0//' -e 's/_NAME$//' | tr ' >> ' ',' | sed -e 's/,$//' -e >> >> >> >> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfcadmus2/COUNTRY_CODE_LIST >> >> >> >> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >> >> >> >> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >> >> >> >> inf/hsfcadmus2smart.inf | ./cvtinf.pl cvt/hsfcadmus2smart; if [ -n "" >> >> >> >> ]; then ./cvtinf.pl cvt/hsfcadmus2smart < ""; else true; fi >> >> >> >> rm -f cadmus2smart/HW_ADAPTER_TYPE >> >> >> >> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfcadmus2smart/. >> >> >> >> ln -sf ../hsfpcibasic2smart/Region cvt/hsfcadmus2smart/. >> >> >> >> (cd cvt/hsfcadmus2smart/Region && grep -v -l '*' *NAME | sed -e >> >> >> >> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr ' >> ' ',' | sed -e 's/,$//' >> >> >> >> -e 's/^/"/' -e 's/$/"/' ; echo "") > >> >> >> >> cvt/hsfcadmus2smart/COUNTRY_CODE_LIST >> >> >> >> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >> >> >> >> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >> >> >> >> inf/hsfhda.inf | ./cvtinf.pl cvt/hsfhda; if [ -n "" ]; then >> >> >> >> ./cvtinf.pl cvt/hsfhda < ""; else true; fi >> >> >> >> rm -f hda/HW_ADAPTER_TYPE >> >> >> >> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfhda/. >> >> >> >> ln -sf ../hsfpcibasic2smart/Region cvt/hsfhda/. >> >> >> >> (cd cvt/hsfhda/Region && grep -v -l '*' *NAME | sed -e 's/^0//' -e >> >> >> >> 's/^0//' -e 's/_NAME$//' | tr ' >> ' ',' | sed -e 's/,$//' -e 's/^/"/' >> >> >> >> -e 's/$/"/' ; echo "") > cvt/hsfhda/COUNTRY_CODE_LIST >> >> >> >> cd cvt && find . -type f ! -empty -exec md5sum {} ';' | sort | >> >> >> >> while read sum file ; do >> >> >> >> if [ "$sum" = "$prevsum" ] && cmp -s "$file" "$prevfile"; then >> >> >> >> rm -f "$file"; >> >> >> >> if ! ln "$prevfile" "$file"; then >> >> >> >> echo 2>&1 "$0: ln FAILED - recreate $file based on $prevfile"; >> >> >> >> exit 1; >> >> >> >> fi; >> >> >> >> else >> >> >> >> prevsum="$sum"; >> >> >> >> prevfile="$file"; >> >> >> >> fi; >> >> >> >> done >> >> >> >> touch cvt/.linksame >> >> >> >> mkdir -m 755 -p /etc/hsfmodem/nvm >> >> >> >> cd cvt && (find hsfpcibasic2 hsfpcibasic2smart hsfpcibasic2hsfi >> >> >> >> hsfpcibasic2bry hsfpcibasic3 hsfmc97 hsfmc97ali hsfmc97ati >> >> >> >> hsfmc97ich hsfmc97sis hsfmc97via hsfcadmus2 hsfcadmus2smart >> >> >> >> hsfhda | cpio -pdmu /etc/hsfmodem/nvm) >> >> >> >> 127 blocks >> >> >> >> make[1]: Leaving directory >> >> >> >> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/nvm' >> >> >> >> make[1]: Entering directory >> >> >> >> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/scripts' >> >> >> >> sed >> >> >> >> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >> >> >> >> -e 's!@CNXTDRIVER@!hsf!g' >> >> >> >> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >> >> >> >> -e 's!@CNXTTARGET@!hsf!g' >> >> >> >> -e 's!@CNXTARCH@!i386!g' >> >> >> >> -e 's!@CNXTSERDEV@!HSF!g' >> >> >> >> -e 's!@CNXTMAXMDM@!8!g' >> >> >> >> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >> >> >> >> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >> >> >> >> -e 's!@CNXTSERIALMAJOR@!240!g' >> >> >> >> -e 's!@CNXTCALOUTMAJOR@!241!g' >> >> >> >> -e 's!@CNXTSERIALMINOR@!64!g' >> >> >> >> -e 's!@CNXTDCPMAJOR@!242!g' >> >> >> >> -e 's!@CNXTDIAGMAJOR@!243!g' >> >> >> >> -e 's!@CNXTDIAGDMPMINOR@!255!g' >> >> >> >> -e 's!@CNXTSCRMAJOR@!244!g' >> >> >> >> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >> >> >> >> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >> >> >> >> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >> >> >> >> -e 's!@CNXTLINUX_REL@!1!g' >> >> >> >> -e 's!@CNXTLINUXRPM_REL@!1!g' >> >> >> >> -e 's!@CNXTLINUXDEB_REL@!1!g' >> >> >> >> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >> >> >> >> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >> >> >> >> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >> >> >> >> -e >> >> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >> >> >> >> >> >> >> >> -e >> >> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >> >> >> >> >> >> >> >> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >> >> >> >> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >> >> >> >> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >> >> >> >> < patcher.in > patcher >> >> >> >> chmod --reference=patcher.in patcher >> >> >> >> ln -s cnxtconfig.in hsfconfig.in >> >> >> >> sed >> >> >> >> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >> >> >> >> -e 's!@CNXTDRIVER@!hsf!g' >> >> >> >> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >> >> >> >> -e 's!@CNXTTARGET@!hsf!g' >> >> >> >> -e 's!@CNXTARCH@!i386!g' >> >> >> >> -e 's!@CNXTSERDEV@!HSF!g' >> >> >> >> -e 's!@CNXTMAXMDM@!8!g' >> >> >> >> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >> >> >> >> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >> >> >> >> -e 's!@CNXTSERIALMAJOR@!240!g' >> >> >> >> -e 's!@CNXTCALOUTMAJOR@!241!g' >> >> >> >> -e 's!@CNXTSERIALMINOR@!64!g' >> >> >> >> -e 's!@CNXTDCPMAJOR@!242!g' >> >> >> >> -e 's!@CNXTDIAGMAJOR@!243!g' >> >> >> >> -e 's!@CNXTDIAGDMPMINOR@!255!g' >> >> >> >> -e 's!@CNXTSCRMAJOR@!244!g' >> >> >> >> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >> >> >> >> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >> >> >> >> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >> >> >> >> -e 's!@CNXTLINUX_REL@!1!g' >> >> >> >> -e 's!@CNXTLINUXRPM_REL@!1!g' >> >> >> >> -e 's!@CNXTLINUXDEB_REL@!1!g' >> >> >> >> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >> >> >> >> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >> >> >> >> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >> >> >> >> -e >> >> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >> >> >> >> >> >> >> >> -e >> >> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >> >> >> >> >> >> >> >> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >> >> >> >> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >> >> >> >> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >> >> >> >> < hsfconfig.in > hsfconfig >> >> >> >> chmod --reference=hsfconfig.in hsfconfig >> >> >> >> ln -s cnxtstop.in hsfstop.in >> >> >> >> sed >> >> >> >> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >> >> >> >> -e 's!@CNXTDRIVER@!hsf!g' >> >> >> >> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >> >> >> >> -e 's!@CNXTTARGET@!hsf!g' >> >> >> >> -e 's!@CNXTARCH@!i386!g' >> >> >> >> -e 's!@CNXTSERDEV@!HSF!g' >> >> >> >> -e 's!@CNXTMAXMDM@!8!g' >> >> >> >> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >> >> >> >> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >> >> >> >> -e 's!@CNXTSERIALMAJOR@!240!g' >> >> >> >> -e 's!@CNXTCALOUTMAJOR@!241!g' >> >> >> >> -e 's!@CNXTSERIALMINOR@!64!g' >> >> >> >> -e 's!@CNXTDCPMAJOR@!242!g' >> >> >> >> -e 's!@CNXTDIAGMAJOR@!243!g' >> >> >> >> -e 's!@CNXTDIAGDMPMINOR@!255!g' >> >> >> >> -e 's!@CNXTSCRMAJOR@!244!g' >> >> >> >> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >> >> >> >> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >> >> >> >> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >> >> >> >> -e 's!@CNXTLINUX_REL@!1!g' >> >> >> >> -e 's!@CNXTLINUXRPM_REL@!1!g' >> >> >> >> -e 's!@CNXTLINUXDEB_REL@!1!g' >> >> >> >> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >> >> >> >> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >> >> >> >> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >> >> >> >> -e >> >> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >> >> >> >> >> >> >> >> -e >> >> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >> >> >> >> >> >> >> >> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >> >> >> >> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >> >> >> >> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >> >> >> >> < hsfstop.in > hsfstop >> >> >> >> chmod --reference=hsfstop.in hsfstop >> >> >> >> ln -s cnxtmodconflicts.in hsfmodconflicts.in >> >> >> >> sed >> >> >> >> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >> >> >> >> -e 's!@CNXTDRIVER@!hsf!g' >> >> >> >> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >> >> >> >> -e 's!@CNXTTARGET@!hsf!g' >> >> >> >> -e 's!@CNXTARCH@!i386!g' >> >> >> >> -e 's!@CNXTSERDEV@!HSF!g' >> >> >> >> -e 's!@CNXTMAXMDM@!8!g' >> >> >> >> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >> >> >> >> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >> >> >> >> -e 's!@CNXTSERIALMAJOR@!240!g' >> >> >> >> -e 's!@CNXTCALOUTMAJOR@!241!g' >> >> >> >> -e 's!@CNXTSERIALMINOR@!64!g' >> >> >> >> -e 's!@CNXTDCPMAJOR@!242!g' >> >> >> >> -e 's!@CNXTDIAGMAJOR@!243!g' >> >> >> >> -e 's!@CNXTDIAGDMPMINOR@!255!g' >> >> >> >> -e 's!@CNXTSCRMAJOR@!244!g' >> >> >> >> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >> >> >> >> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >> >> >> >> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >> >> >> >> -e 's!@CNXTLINUX_REL@!1!g' >> >> >> >> -e 's!@CNXTLINUXRPM_REL@!1!g' >> >> >> >> -e 's!@CNXTLINUXDEB_REL@!1!g' >> >> >> >> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >> >> >> >> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >> >> >> >> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >> >> >> >> -e >> >> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >> >> >> >> >> >> >> >> -e >> >> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >> >> >> >> >> >> >> >> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >> >> >> >> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >> >> >> >> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >> >> >> >> < hsfmodconflicts.in > hsfmodconflicts >> >> >> >> chmod --reference=hsfmodconflicts.in hsfmodconflicts >> >> >> >> ln -s cnxtdcpd.in hsfdcpd.in >> >> >> >> sed >> >> >> >> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >> >> >> >> -e 's!@CNXTDRIVER@!hsf!g' >> >> >> >> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >> >> >> >> -e 's!@CNXTTARGET@!hsf!g' >> >> >> >> -e 's!@CNXTARCH@!i386!g' >> >> >> >> -e 's!@CNXTSERDEV@!HSF!g' >> >> >> >> -e 's!@CNXTMAXMDM@!8!g' >> >> >> >> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >> >> >> >> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >> >> >> >> -e 's!@CNXTSERIALMAJOR@!240!g' >> >> >> >> -e 's!@CNXTCALOUTMAJOR@!241!g' >> >> >> >> -e 's!@CNXTSERIALMINOR@!64!g' >> >> >> >> -e 's!@CNXTDCPMAJOR@!242!g' >> >> >> >> -e 's!@CNXTDIAGMAJOR@!243!g' >> >> >> >> -e 's!@CNXTDIAGDMPMINOR@!255!g' >> >> >> >> -e 's!@CNXTSCRMAJOR@!244!g' >> >> >> >> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >> >> >> >> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >> >> >> >> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >> >> >> >> -e 's!@CNXTLINUX_REL@!1!g' >> >> >> >> -e 's!@CNXTLINUXRPM_REL@!1!g' >> >> >> >> -e 's!@CNXTLINUXDEB_REL@!1!g' >> >> >> >> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >> >> >> >> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >> >> >> >> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >> >> >> >> -e >> >> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >> >> >> >> >> >> >> >> -e >> >> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >> >> >> >> >> >> >> >> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >> >> >> >> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >> >> >> >> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >> >> >> >> < hsfdcpd.in > hsfdcpd >> >> >> >> chmod --reference=hsfdcpd.in hsfdcpd >> >> >> >> install -m 700 hsfconfig hsfstop hsfmodconflicts hsfdcpd /usr/sbin >> >> >> >> ln -s rccnxt.in rchsf.in >> >> >> >> sed >> >> >> >> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >> >> >> >> -e 's!@CNXTDRIVER@!hsf!g' >> >> >> >> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >> >> >> >> -e 's!@CNXTTARGET@!hsf!g' >> >> >> >> -e 's!@CNXTARCH@!i386!g' >> >> >> >> -e 's!@CNXTSERDEV@!HSF!g' >> >> >> >> -e 's!@CNXTMAXMDM@!8!g' >> >> >> >> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >> >> >> >> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >> >> >> >> -e 's!@CNXTSERIALMAJOR@!240!g' >> >> >> >> -e 's!@CNXTCALOUTMAJOR@!241!g' >> >> >> >> -e 's!@CNXTSERIALMINOR@!64!g' >> >> >> >> -e 's!@CNXTDCPMAJOR@!242!g' >> >> >> >> -e 's!@CNXTDIAGMAJOR@!243!g' >> >> >> >> -e 's!@CNXTDIAGDMPMINOR@!255!g' >> >> >> >> -e 's!@CNXTSCRMAJOR@!244!g' >> >> >> >> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >> >> >> >> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >> >> >> >> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >> >> >> >> -e 's!@CNXTLINUX_REL@!1!g' >> >> >> >> -e 's!@CNXTLINUXRPM_REL@!1!g' >> >> >> >> -e 's!@CNXTLINUXDEB_REL@!1!g' >> >> >> >> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >> >> >> >> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >> >> >> >> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >> >> >> >> -e >> >> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >> >> >> >> >> >> >> >> -e >> >> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >> >> >> >> >> >> >> >> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >> >> >> >> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >> >> >> >> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >> >> >> >> < rchsf.in > rchsf >> >> >> >> chmod --reference=rchsf.in rchsf >> >> >> >> mkdir -m 755 -p /usr/lib/hsfmodem >> >> >> >> install -m 700 rchsf /usr/lib/hsfmodem >> >> >> >> make[1]: Leaving directory >> >> >> >> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/scripts' >> >> >> >> make[1]: Entering directory >> >> >> >> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/modules' >> >> >> >> rm -rf "/usr/lib/hsfmodem/config.mak" >> >> >> >> "/usr/lib/hsfmodem/modules/imported" "/usr/lib/hsfmodem/modules" >> >> >> >> mkdir -m 755 -p /usr/lib/hsfmodem/modules >> >> >> >> (cd .. && find config.mak modules/imported -depth -print | cpio -pdmu >> >> >> >> /usr/lib/hsfmodem) >> >> >> >> 5892 blocks >> >> >> >> find . ( -name COPYING -o -name '*.sh' -o -name '*.[ch]' -o -name >> >> >> >> '*.mak' -o -name '[Mm]akefile' ) -print | cpio -pdmu >> >> >> >> /usr/lib/hsfmodem/modules >> >> >> >> 3712 blocks >> >> >> >> find binaries -depth -print | cpio -pdmu /usr/lib/hsfmodem/modules >> >> >> >> 0 blocks >> >> >> >> make[1]: Leaving directory >> >> >> >> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/modules' >> >> >> >> make[1]: Entering directory >> >> >> >> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/diag' >> >> >> >> make[1]: Nothing to be done for `install'. >> >> >> >> make[1]: Leaving directory >> >> >> >> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/diag' >> >> >> >> mkdir -p /etc/hsfmodem/log >> >> >> >> install -m 444 LICENSE /usr/lib/hsfmodem >> >> >> >> >> >> >> >> To complete the installation and configuration of your modem, >> >> >> >> please run "hsfconfig" (or "/usr/sbin/hsfconfig") >> >> >> >> >> >> >> >> >> >> >> >> Might it be with Ubuntu? I used generic package with >> >> >> >> [olivares@acer-aspire-1 hsfmodem-7.80.02.06full]$ uname -a >> >> >> >> Linux acer-aspire-1 2.6.40-4.fc15.i686 #1 SMP Fri Jul 29 18:54:39 UTC >> >> >> >> 2011 i686 i686 i386 GNU/Linux >> >> >> >> >> >> >> >> Maybe Marv can test to find out what could be wrong? >> >> >> >> >> >> >> >> Regards, >> >> >> >> >> >> >> >> Antonio >> >> >> >> >> >> >> >> On Thu, Aug 25, 2011 at 8:02 PM, Antonio Olivares >> >> >> >> <olivares14031@xxxxxxxxx> wrote: >> >> >> > >>> Jeffrey, > >> >> >> > >>> > >> >> >> > >>> In the case you provided, you installed/tried to install the > >> >> >> > >>> alsa-linuxant package? > >> >> >> > >>> > >> >> >> > >>> You may not have needed this package. > >> >> >> > >>> > >> >> >> > >>> You do have kernel sources and compiler ready. However, the > >> >> >> > >>> replacements on the hsfmodem would differ with the ones suggested by > >> >> >> > >>> Jonathan(Linuxant support), DECLARE_MUTEX, with DEFINE_SEMAPHORE after > >> >> >> > >>> you have detected where it bombs out or wait a bit till they(Linuxant) > >> >> >> > >>> patch up the code and make it ready to work. > >> >> >> > >>> > >> >> >> > >>> If someone has suggestions, please forward them to Jeffrey. > >> >> >> > >>> > >> >> >> > >>> Regards, > >> >> >> > >>> > >> >> >> > >>> Antonio > >> >> >> > >>> > >> >> >> > >>> > >> >> >> > >>> On Thu, Aug 25, 2011 at 5:15 PM, <cohanjeffrey@xxxxxxx> wrote: > >> >> >> > >>>> Great to hear from you Antonio. I'm working only with the Sony 32-bit >>>> VAIO > >> >> >> > >>>> VGN-N130G and will attach ModemData.txt again. > >> >> >> > >>>> > >> >> >> > >>>> 1) I did this BUT substituted /hsfmodem/ for /hcfpcimodem/ and wvdial >>>> does > >> >> >> > >>>> not find a modem: > >> >> >> > >>>> > >> >> >> > >>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in: > >> >> >> > >>>> - /usr/lib/hcfpcimodem/modules/osnvm.c > >> >> >> > >>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c > >> >> >> > >>>> replace .ioctl with .compat_ioctl in: > >> >> >> > >>>> - /usr/lib/hcfpcimodem/modules/osdiag.c > >> >> >> > >>>> > >> >> >> > >>>> 2) ERRORS: Both alsa-driver-linuxant and hfsmodem packages install with > >> >> >> > >>>> errors, even when I remove them and re-install. Here are excerpts: > >> >> >> > >>>> > >> >> >> > >>>> alsa-driver-linuxant_1.0.23.1_all.deb: > >> >> >> > >>>> ----in terminal: > >> >> >> > >>>> Building modules for the 2.6.38-11-generic kernel, please wait... done. > >> >> >> > >>>> ERROR: Build failed. Please review the build log at > >> >> >> > >>>> /tmp/alsa-driver-linuxant.26528.log > >> >> >> > >>>> dpkg: error processing alsa-driver-linuxant (--install): > >> >> >> > >>>> subprocess installed post-installation script returned error exit >>>> status >>>> 2 > >> >> >> > >>>> ----in log file: > >> >> >> > >>>> checking for GCC version... Kernel compiler: Used compiler: gcc > >> >> >> > >>>> (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2 > >> >> >> > >>>> *** NO PREDEFINED KERNEL COMPILER IS DETECTED > >> >> >> > >>>> *** Assuming the same compiler is used with the current system compiler. > >> >> >> > >>>> *** Please make sure that the same compiler version was used for >>>> building > >> >> >> > >>>> kernel. > >> >> >> > >>>> and later... > >> >> >> > >>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function > >> >> >> > >>>> ‘snd_pcm_hw_params’: > >> >> >> > >>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error: implicit > >> >> >> > >>>> declaration of function ‘pm_qos_remove_requirement’ > >> >> >> > >>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:492:3: error: implicit > >> >> >> > >>>> declaration of function ‘pm_qos_add_requirement’ > >> >> >> > >>>> make[3]: *** [/usr/lib/alsa-driver-linuxant/acore/pcm_native.o] Error 1 > >> >> >> > >>>> make[2]: *** [/usr/lib/alsa-driver-linuxant/acore] Error 2 > >> >> >> > >>>> make[1]: *** [_module_/usr/lib/alsa-driver-linuxant] Error 2 > >> >> >> > >>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic' > >> >> >> > >>>> make: *** [compile] Error 2 > >> >> >> > >>>> > >> >> >> > >>>> hsfmodem_7.80.02.06full_i386.deb: > >> >> >> > >>>> /usr/lib/hsfmodem/modules/osservices.c:1396:1: warning: the frame size >>>> of > >> >> >> > >>>> 1028 bytes is larger than 1024 bytes > >> >> >> > >>>> CC [M] /usr/lib/hsfmodem/modules/osstdio.o > >> >> >> > >>>> CC [M] /usr/lib/hsfmodem/modules/osnvm.o > >> >> >> > >>>> /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared here >>>> (not > >> >> >> > >>>> in a function) > >> >> >> > >>>> make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1 > >> >> >> > >>>> make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2 > >> >> >> > >>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic' > >> >> >> > >>>> make: *** [all] Error 2 > >> >> >> > >>>> ----I have the long hsfdiag.txt file from "hsfconfig --dumpdiag" and the > >> >> >> > >>>> buildlog files > >> >> >> > >>>> > >> >> >> > >>>> 3) $ uname -a (Jonathan had asked someone for this) gets: > >> >> >> > >>>> Linux whiskeybisquit-VGN-N130G 2.6.38-11-generic #48-Ubuntu SMP Fri Jul >>>> 29 > >> >> >> > >>>> 19:05:14 UTC 2011 i68 > >> >> >> > >>>> > >> >> >> > >>>> 4) I had the modem working perfectly in Ubuntu 9.04, but don't remember >>>> how > >> >> >> > >>>> I did it. Is it possible that it CAN'T be done in 11.04?! > >> >> >> > >>>> > >> >> >> > >>>> I'm not sure if any of this will be of use to you, but am particularly > >> >> >> > >>>> interested in 4); and is it correct to substitute hsfmodem in 1)? Is 2) >>>> an > >> >> >> > >>>> issue? Also would it have been important to reboot at certain points? >>>> Should > >> >> >> > >>>> I install a new modem in either beast? I so depend on dial-up! Many >>>> thanks! > >> >> >> > >>>> > >> >> >> > >>>> Jeffrey > >> >> >> > >>>> > >> >> >> > >>>> -----Original Message----- > >> >> >> > >>>> From: Antonio Olivares <olivares14031@xxxxxxxxx> > >> >> >> > >>>> To: Jeffrey Cohan <cohanjeffrey@xxxxxxx> > >> >> >> > >>>> Cc: discuss@xxxxxxxxxxxxx > >> >> >> > >>>> Sent: Wed, Aug 24, 2011 7:17 pm > >> >> >> > >>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> Jeffrey, > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> In the x86_64 bit machine, if you had 32 bit linux installed, it would > >> >> >> > >>>> > >> >> >> > >>>> be a nice opportunity for you to check the modified driver *to see if > >> >> >> > >>>> > >> >> >> > >>>> it would work*, but since it is 64 bit you get the message directly > >> >> >> > >>>> > >> >> >> > >>>> from ModemData.txt > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> There is no agrsm software support for x86_64 systems, through the modem >>>> may > >> >> >> > >>>> be > >> >> >> > >>>> > >> >> >> > >>>> supported on Intel/i386 installations, which do more slowly servce > >> >> >> > >>>> > >> >> >> > >>>> x86_64 processors. > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> * driver > >> >> >> > >>>> > >> >> >> > >>>> >>>> >>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm-11c11040_20110811_i386.deb > >> >> >> > >>>> > >> >> >> > >>>> + new agrsm tools > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> For the other modem, Jonathan at Linuxant has posted ways to > >> >> >> > >>>> > >> >> >> > >>>> circumvent the errors: > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> >>>> >>>> http://linmodems.org/cgi-bin/ezmlm-cgi?1:sss:37710:201108:dpmgnpddbcjlkfmlpmin#b > >> >> >> > >>>> > >> >> >> > >>>> <quote> > >> >> >> > >>>> > >> >> >> > >>>> Hi, > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> this is a known build issue with recent kernels, even with the latest > >> >> >> > >>>> > >> >> >> > >>>> release of the driver. A used provided the following workaround to > >> >> >> > >>>> > >> >> >> > >>>> solve it: > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> --- > >> >> >> > >>>> > >> >> >> > >>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in: > >> >> >> > >>>> > >> >> >> > >>>> - /usr/lib/hcfpcimodem/modules/osnvm.c > >> >> >> > >>>> > >> >> >> > >>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> replace .ioctl with .compat_ioctl in: > >> >> >> > >>>> > >> >> >> > >>>> - /usr/lib/hcfpcimodem/modules/osdiag.c > >> >> >> > >>>> > >> >> >> > >>>> --- > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> This build problem will be fixed in a future release of the driver. > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> Regards, > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> Jonathan > >> >> >> > >>>> > >> >> >> > >>>> Technical specialist / Linuxant > >> >> >> > >>>> > >> >> >> > >>>> www.linuxant.com > >> >> >> > >>>> > >> >> >> > >>>> support@xxxxxxxxxxxx > >> >> >> > >>>> > >> >> >> > >>>> </quote> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> So you may try the fixes suggested by Jonathan in the meantime. Or > >> >> >> > >>>> > >> >> >> > >>>> you have the option to try the driver 11c11040 but on 32 bit linux. > >> >> >> > >>>> > >> >> >> > >>>> Hopefully you can get one of these modems to work. > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> Regards, > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> Antonio > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> On Wed, Aug 24, 2011 at 8:56 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> >>>> wrote: > >> >> >> > >>>> > >> >> >> > >>>>> I have spent many many hours trying to get dial-up working on two >>>>> laptops > >> >> >> > >>>> > >> >> >> > >>>>> and would so appreciate your help. Dial-up on either one would be just > >> >> >> > >>>>> fine. > >> >> >> > >>>> > >> >> >> > >>>>> > >> >> >> > >>>> > >> >> >> > >>>>> I'm assuming it will be impossible on the HP laptop (64-bit) as I found > >> >> >> > >>>> > >> >> >> > >>>>> this: > >> >> >> > >>>> > >> >> >> > >>>>> "Current support for the 11c11040 modem does NOT exist on a non-x86 >>>>> system > >> >> >> > >>>> > >> >> >> > >>>>> (e.g. AMD, or x86_64.) This is because there is a proprietary core in >>>>> the > >> >> >> > >>>> > >> >> >> > >>>>> code compiled for x86 systems." > >> >> >> > >>>> > >> >> >> > >>>>> > >> >> >> > >>>> > >> >> >> > >>>>> On the VAIO (32-bit) it worked perfectly in an earlier version of >>>>> Ubuntu > >> >> >> > >>>> > >> >> >> > >>>>> before upgrading. > >> >> >> > >>>> > >> >> >> > >>>>> > >> >> >> > >>>> > >> >> >> > >>>>> I can't seem to find an appropriate driver at www.linuxant.com for my > >> >> >> > >>>>> Linux > >> >> >> > >>>> > >> >> >> > >>>>> version 2.6.38-11-generic. > >> >> >> > >>>> > >> >> >> > >>>>> > >> >> >> > >>>> > >> >> >> > >>>>> Alsa-driver-linuxant doesn't seem to be properly installed. > >> >> >> > >>>> > >> >> >> > >>>>> > >> >> >> > >>>> > >> >> >> > >>>>> I get this error message: > >> >> >> > >>>> > >> >> >> > >>>>> ERROR: Module build failed! > >> >> >> > >>>> > >> >> >> > >>>>> Please examine the log file > >> >> >> > >>>>> "/etc/hsfmodem/log/buildlog-20110824182445.txt" > >> >> >> > >>>> > >> >> >> > >>>>> to determine why. > >> >> >> > >>>> > >> >> >> > >>>>> dpkg: error processing alsa-driver-linuxant (--configure): > >> >> >> > >>>> > >> >> >> > >>>>> subprocess installed post-installation script returned error exit >>>>> status > >> >> >> > >>>>> 2 > >> >> >> > >>>> > >> >> >> > >>>>> Errors were encountered while processing: > >> >> >> > >>>> > >> >> >> > >>>>> alsa-driver-linuxant > >> >> >> > >>>> > >> >> >> > >>>>> E: Sub-process /usr/bin/dpkg returned an error code (1) > >> >> >> > >>>> > >> >> >> > >>>>> =============== > >> >> >> > >>>> > >> >> >> > >>>>> > >> >> >> > >>>> > >> >> >> > >>>>> Thanks much! > >> >> >> > >>>> > >> >> >> > >>>>> > >> >> >> > >>>> > >> >> >> > >>>>> Jeff > >> >> >> > >>>> > >> >> >> > >>>>> > >> >> >> > >>>> > >> >> >> > >>>>> > >> >> >> > >>>> > >> >> >> > >>>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>>> > >> >> >> > >>> > >> >> >> >> >> >> >
