Antonio, for completeness: linux-k7za:~ # slmodemd -d -c GERMANY --alsa hw:0,6 SmartLink Soft Modem: version 2.9.11 Aug 9 2011 14:15:04 <509.933718> SmartLink Soft Modem: version 2.9.11 Aug 9 2011 14:15:04 <509.933749> hw:0,6: startup modem... <509.934052> hw:0,6: update termios... symbolic link `/dev/ttySL0' -> `/dev/pts/2' created. modem `hw:0,6' created. TTY is `/dev/pts/2' <509.934183> open file: /var/lib/slmodem/data.hw:0,6... <509.934213> cannot open '/var/lib/slmodem/data.hw:0,6': No such file or directory error: sched_setscheduler: Operation not permitted <509.935465> main: rt applyed: SCHED_FIFO, pri 99 Use `/dev/ttySL0' as modem device, Ctrl+C for termination. <520.213998> main: termios changed. <520.214021> hw:0,6: update termios... <520.274303> main: termios changed. <520.274325> hw:0,6: update termios... <520.376343> hw:0,6: run cmd: ATZ <520.376363> hw:0,6: modem reset... <520.376368> hw:0,6: modem set state: 1 --> 1... <520.376375> hw:0,6: modem set mode: -> 0... <520.376381> hw:0,6: modem report result: 0 (OK) <520.478372> hw:0,6: run cmd: ATQ0V1E1S0=0X3&C1&D2+MS=90 <520.478405> hw:0,6: modem report result: 0 (OK) <520.580350> hw:0,6: run cmd: ATDT019193790 <520.580378> hw:0,6: modem dial: T019193790... <520.580384> hw:0,6: modem_dial_start... <520.580412> hw:0,6: modem_start.. <520.580417> hw:0,6: modem set state: 1 --> 2... <520.580423> hw:0,6: new state: DP_ESTAB <520.580427> main: alsa_ioctl: cmd 8, arg 3... <520.580432> hw:0,6: modem set hook: 0 --> 1... <520.580437> main: alsa_ioctl: cmd 2, arg 1... <520.580549> main: alsa_ioctl: cmd 11, arg 0... <520.580597> main: alsa_ioctl: cmd 4, arg 2580... <520.580603> main: alsa_ioctl: cmd 7, arg 30... <520.580608> main: alsa_start... Hardware PCM card 0 'HDA Intel' device 6 subdevice 0 Its setup is: stream : PLAYBACK access : RW_INTERLEAVED format : S16_LE subformat : STD channels : 1 rate : 9600 exact rate : 9600 (9600/1) msbits : 16 buffer_size : 2048 period_size : 64 period_time : 6666 tstamp_mode : NONE period_step : 1 avail_min : 64 period_event : 0 start_threshold : 2147483647 stop_threshold : 2048 silence_threshold: 0 silence_size : 0 boundary : 1073741824 appl_ptr : 0 hw_ptr : 0 Hardware PCM card 0 'HDA Intel' device 6 subdevice 0 Its setup is: stream : CAPTURE access : RW_INTERLEAVED format : S16_LE subformat : STD channels : 1 rate : 9600 exact rate : 9600 (9600/1) msbits : 16 buffer_size : 2048 period_size : 64 period_time : 6666 tstamp_mode : NONE period_step : 1 avail_min : 64 period_event : 0 start_threshold : 2147483647 stop_threshold : 2048 silence_threshold: 0 silence_size : 0 boundary : 1073741824 appl_ptr : 0 hw_ptr : 0 <520.582928> main: startup write: 384... <520.653022> main: alsa xrun: try to recover... <520.653318> main: alsa xrun: recovered. <520.653325> main: dev read = 0 <520.654040> main: alsa xrun: try to recover... <520.654361> main: alsa xrun: recovered. <520.654367> main: dev write = 0 <520.655069> main: alsa xrun: try to recover... <520.655387> main: alsa xrun: recovered. <520.655394> main: dev write = 0 <520.656109> main: alsa xrun: try to recover... <520.656829> main: alsa xrun: recovered. <520.656851> main: dev write = 0 <520.656881> main: alsa xrun: try to recover... <520.657196> main: alsa xrun: recovered. <520.657202> main: dev read = 0 <520.658040> main: alsa xrun: try to recover... <520.658449> main: alsa xrun: recovered. <520.658464> main: dev write = 0 <520.659177> main: alsa xrun: try to recover... <520.659555> main: alsa xrun: recovered. <520.659570> main: dev write = 0 <520.659609> main: alsa xrun: try to recover... <520.659923> main: alsa xrun: recovered. <520.659929> main: dev read = 0 <520.660771> main: alsa xrun: try to recover... <520.661093> main: alsa xrun: recovered. <520.661099> main: dev write = 0 <520.661922> main: alsa xrun: try to recover... <520.662237> main: alsa xrun: recovered. <520.662242> main: dev write = 0 <520.663079> main: alsa xrun: try to recover... <520.663448> main: alsa xrun: recovered. <520.663462> main: dev write = 0 <520.664173> main: alsa xrun: try to recover... <520.664572> main: alsa xrun: recovered. <520.664587> main: dev write = 0 <520.665385> main: alsa xrun: try to recover... <520.665719> main: alsa xrun: recovered. <520.665724> main: dev write = 0 <520.666534> main: alsa xrun: try to recover... <520.666862> main: alsa xrun: recovered. <520.666868> main: dev write = 0 <520.667680> main: alsa xrun: try to recover... <520.668008> main: alsa xrun: recovered. <520.668013> main: dev write = 0 <520.668812> main: alsa xrun: try to recover... <520.669139> main: alsa xrun: recovered. <520.669144> main: dev write = 0 <520.669191> main: alsa xrun: try to recover... <520.669614> main: alsa xrun: recovered. <520.669629> main: dev read = 0 <520.670447> main: alsa xrun: try to recover... <520.670780> main: alsa xrun: recovered. <520.670786> main: dev write = 0 <520.671620> main: alsa xrun: try to recover... <520.671949> main: alsa xrun: recovered. <520.671954> main: dev write = 0 <520.671984> main: alsa xrun: try to recover... <520.672421> main: alsa xrun: recovered. <520.672431> main: dev read = 0 <520.673117> main: alsa xrun: try to recover... <520.673532> main: alsa xrun: recovered. <520.673546> main: dev write = 0 <520.674256> main: alsa xrun: try to recover... <520.674698> main: alsa xrun: recovered. <520.674713> main: dev write = 0 <520.675527> main: alsa xrun: try to recover... <520.675841> main: alsa xrun: recovered. <520.675846> main: dev write = 0 <520.676647> main: alsa xrun: try to recover... <520.676966> main: alsa xrun: recovered. <520.676971> main: dev write = 0 <520.677784> main: alsa xrun: try to recover... <520.678112> main: alsa xrun: recovered. <520.678117> main: dev write = 0 <520.678932> main: alsa xrun: try to recover... <520.679257> main: alsa xrun: recovered. <520.679263> main: dev write = 0 <520.679420> main: alsa xrun: try to recover... <520.679740> main: alsa xrun: recovered. <520.679745> main: dev read = 0 <520.680572> main: alsa xrun: try to recover... <520.680910> main: alsa xrun: recovered. <520.680916> main: dev write = 0 <520.680962> main: alsa xrun: try to recover... <520.681409> main: alsa xrun: recovered. <520.681482> main: dev read = 0 <520.681526> main: alsa xrun: try to recover... <520.681846> main: alsa xrun: recovered. <520.681852> main: dev read = 0 <520.681880> main: alsa xrun: try to recover... <520.682195> main: alsa xrun: recovered. <520.682200> main: dev read = 0 <520.683121> main: alsa xrun: try to recover... <520.683531> main: alsa xrun: recovered. <520.683546> main: dev write = 0 <520.683840> hw:0,6: modem_update_status: 16 <520.683848> hw:0,6: --> FINISH. <520.683852> hw:0,6: modem_hup... <520.683856> hw:0,6: modem set state: 2 --> 9... <520.683862> hw:0,6: new state: DP_DISC <520.683878> hw:0,6: modem_update_status: 16 <520.683883> hw:0,6: --> FINISH. <520.683887> hw:0,6: modem_hup... <520.683903> hw:0,6: modem_update_status: 16 <520.683907> hw:0,6: --> FINISH. <520.683912> hw:0,6: modem_hup... <520.683927> hw:0,6: modem_update_status: 16 <520.683932> hw:0,6: --> FINISH. <520.683936> hw:0,6: modem_hup... <520.683952> hw:0,6: modem_update_status: 16 <520.683956> hw:0,6: --> FINISH. <520.683960> hw:0,6: modem_hup... <520.683976> hw:0,6: modem_update_status: 16 <520.683981> hw:0,6: --> FINISH. <520.683985> hw:0,6: modem_hup... <520.684001> hw:0,6: modem_update_status: 16 <520.684005> hw:0,6: --> FINISH. <520.684009> hw:0,6: modem_hup... <520.684025> hw:0,6: modem_update_status: 16 <520.684030> hw:0,6: --> FINISH. <520.684034> hw:0,6: modem_hup... <520.684050> hw:0,6: modem_update_status: 16 <520.684054> hw:0,6: --> FINISH. <520.684058> hw:0,6: modem_hup... <520.684074> hw:0,6: modem_update_status: 16 <520.684079> hw:0,6: --> FINISH. <520.684082> hw:0,6: modem_hup... <520.684099> hw:0,6: modem_update_status: 16 <520.684104> hw:0,6: --> FINISH. <520.684108> hw:0,6: modem_hup... <520.684123> hw:0,6: modem_update_status: 16 <520.684128> hw:0,6: --> FINISH. <520.684132> hw:0,6: modem_hup... <520.684148> hw:0,6: modem_update_status: 16 <520.684153> hw:0,6: --> FINISH. <520.684157> hw:0,6: modem_hup... <520.684172> hw:0,6: modem_update_status: 16 <520.684177> hw:0,6: --> FINISH. <520.684181> hw:0,6: modem_hup... <520.684197> hw:0,6: modem_update_status: 16 <520.684201> hw:0,6: --> FINISH. <520.684205> hw:0,6: modem_hup... <520.684221> hw:0,6: modem_update_status: 16 <520.684226> hw:0,6: --> FINISH. <520.684230> hw:0,6: modem_hup... <520.684245> hw:0,6: modem_update_status: 16 <520.684250> hw:0,6: --> FINISH. <520.684254> hw:0,6: modem_hup... <520.684897> hw:0,6: modem_update_status: 16 <520.684910> hw:0,6: --> FINISH. <520.684914> hw:0,6: modem_hup... <520.684930> hw:0,6: modem_update_status: 16 <520.684935> hw:0,6: --> FINISH. <520.684939> hw:0,6: modem_hup... <520.684955> hw:0,6: modem_update_status: 16 <520.684959> hw:0,6: --> FINISH. <520.684963> hw:0,6: modem_hup... <520.684979> hw:0,6: modem_update_status: 16 <520.684984> hw:0,6: --> FINISH. <520.684988> hw:0,6: modem_hup... <520.685004> hw:0,6: modem_update_status: 16 <520.685008> hw:0,6: --> FINISH. <520.685012> hw:0,6: modem_hup... <520.685028> hw:0,6: modem_update_status: 16 <520.685033> hw:0,6: --> FINISH. <520.685037> hw:0,6: modem_hup... <520.685053> hw:0,6: modem_update_status: 16 <520.685057> hw:0,6: --> FINISH. <520.685061> hw:0,6: modem_hup... <520.685077> hw:0,6: modem_update_status: 16 <520.685081> hw:0,6: --> FINISH. <520.685085> hw:0,6: modem_hup... <520.685101> hw:0,6: modem_update_status: 16 <520.685106> hw:0,6: --> FINISH. <520.685110> hw:0,6: modem_hup... <520.685126> hw:0,6: modem_update_status: 16 <520.685130> hw:0,6: --> FINISH. <520.685134> hw:0,6: modem_hup... <520.685150> hw:0,6: modem_update_status: 16 <520.685155> hw:0,6: --> FINISH. <520.685159> hw:0,6: modem_hup... <520.685164> hw:0,6: modem_stop.. <520.685168> main: alsa_stop... <520.685204> hw:0,6: modem set hook: 1 --> 0... <520.685211> main: alsa_ioctl: cmd 2, arg 0... <520.685781> main: alsa_ioctl: cmd 8, arg 0... <520.685806> hw:0,6: modem set state: 9 --> 1... <520.685817> hw:0,6: new state: MODEM_IDLE <520.685822> hw:0,6: modem report result: 6 (NO DIALTONE) <520.685831> main: dev write = 0 <520.787483> main: termios changed. <520.787509> hw:0,6: update termios... <520.787541> main: pty closed. ^C<540.854338> main: signal 2: mark termination. <540.854375> hw:0,6: modem_delete... linux-k7za:~ # wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 OK --> Modem initialized. --> Idle Seconds = 300, disabling automatic reconnect. --> Sending: ATDT019193790 --> Waiting for carrier. ATDT019193790 NO DIALTONE --> No dial tone. --> Disconnecting at Wed Aug 17 18:12:00 2011 Regards Ludwig -------- Original-Nachricht -------- Datum: Mon, 15 Aug 2011 10:47:19 +0200 Von: "Ludwig Gebauer" <ludwiggebauer@xxxxxxx> An: discuss@xxxxxxxxxxxxx Betreff: Re: Re: Re: Ludwig Gebauer, Germany, openSUSE 11.4 "Celadon" - Kernel kernel 2.6.37.1-1.2-desktop Antonio, yes, I did read the documentation contained in SLMODEMD_gcc4.5_alsa1.0.24.tar.gz :-)) Yes, I tried that Init2 string Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS90 and monitored the phone line with a voltmeter and high impedance (crystal) earphones. Same result: The modem takes up the phone and hangs it up immediately, doesn't dial. Regards Ludwig -------- Original-Nachricht -------- > Datum: Sun, 14 Aug 2011 12:19:31 -0500 > Von: Antonio Olivares <olivares14031@xxxxxxxxx> > An: Ludwig Gebauer <ludwiggebauer@xxxxxxx> > CC: discuss@xxxxxxxxxxxxx > Betreff: Re: Re: Re: Ludwig Gebauer, Germany, openSUSE 11.4 "Celadon" - Kernel kernel 2.6.37.1-1.2-desktop > Ludwig, > > Try editing your /etc/wvdial.conf file and change Init 2 as follows: > > sample Init 2 line: > > Modem = /dev/ttySL0 > Baud = 460800 > Init = ATZ > Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS90 > ISDN = 0 > Modem Type = Analog Modem > Phone = YOUR_ISP_PHONE_NUMBER_GOES_HERE > Username = YOUR_USERNAME > Password = YOUR_PASSWORD > Carrier Check = no > Stupid Mode = yes > > Try that and report back. > > Regards, > > Antonio > > > > On Sun, Aug 14, 2011 at 12:08 PM, Ludwig Gebauer <ludwiggebauer@xxxxxxx> > wrote: > > Marvin, > > > > thank you very much. > > > > Now the modem shows some reaction, but no real success: Wvdial exits > with a happy "NO DIALTONE". A shot dip in phone line voltage indicates, that > the modem picks up the phone, but immediately hangs it up again, before any > telephone provider might have a chance to send a dialtone. The hardware > seems o.k.; I am posting via the same hardware and phone line under SuSE 10.3. > > > > Fiddling with drivers (Removing oss-drivers, inserting available > snd_intel_*-drivers) and wvdial.conf settings (Reduced baudrate, dial without > waiting for dialtone, etc.) brought no change. > > > > Suspicious: > > > > linux-k7za:~ # slmodemd -c GERMANY --alsa hw:0,6 > > SmartLink Soft Modem: version 2.9.11 Aug 9 2011 14:15:04 > > symbolic link `/dev/ttySL0' -> `/dev/pts/2' created. > > modem `hw:0,6' created. TTY is `/dev/pts/2' > > error: sched_setscheduler: Operation not permitted > > Use `/dev/ttySL0' as modem device, Ctrl+C for termination. > > > > Whitch Operation?? I suspected a priority problem, invoced slmodend with > nice -20, but no change. > > > > Also suspicious: > > > > linux-k7za:~ # dmesg > > . > > . > > [ 536.642852] hda-intel: IRQ timing workaround is activated for card > #0. Suggest a bigger bdl_pos_adj. > > > > Regards > > Ludwig -- Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de -- Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de
