Hi
Can you help me use my modem ?
CPU0 CPU1
0: 1572663 33 IO-APIC-edge timer
1: 9 5064 IO-APIC-edge i8042
8: 1 0 IO-APIC-edge rtc0
9: 874 19698 IO-APIC-fasteoi acpi
12: 2034932 0 IO-APIC-edge i8042
14: 33488 2 IO-APIC-edge ata_piix
15: 0 0 IO-APIC-edge ata_piix
16: 239933 0 IO-APIC-fasteoi i915
17: 347372 0 IO-APIC-fasteoi uhci_hcd:usb3, eth1
18: 0 0 IO-APIC-fasteoi uhci_hcd:usb4
19: 3888 93954 IO-APIC-fasteoi ata_piix, uhci_hcd:usb5
22: 1 0 IO-APIC-fasteoi mmc0, firewire_ohci
23: 0 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
43: 946 0 PCI-MSI-edge hda_intel
44: 4 0 PCI-MSI-edge eth0
NMI: 0 0 Non-maskable interrupts
LOC: 424033 1016996 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
PND: 0 0 Performance pending work
RES: 1127033 1408816 Rescheduling interrupts
CAL: 86 96 Function call interrupts
TLB: 6365 6552 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 23 23 Machine check polls
ERR: 0
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-28-generic (buildd@roseapple) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #49-Ubuntu SMP Tue Mar 1 14:40:58 UTC 2011 (Ubuntu 2.6.35-28.49-generic 2.6.35.11)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f690000 (usable)
[ 0.000000] BIOS-e820: 000000003f690000 - 000000003f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3f690 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f690000 (usable)
[ 0.000000] modified: 000000003f690000 - 000000003f700000 (ACPI NVS)
[ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] found SMP MP-table at [c00f7100] f7100
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[ 0.000000] RAMDISK: 2eee7000 - 2f92c000
[ 0.000000] ACPI: RSDP 000f6f60 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 3f691758 0008C (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
[ 0.000000] ACPI: FACP 3f69abf8 000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 3f69356b 07619 (v01 INTEL CALISTGA 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS 3f69bfc0 00040
[ 0.000000] ACPI: APIC 3f69acec 00068 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 3f69ad54 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 3f69ad8c 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA 3f69adc8 00032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
[ 0.000000] ACPI: SLIC 3f69adfa 00176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
[ 0.000000] ACPI: APIC 3f69af70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 3f69afd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 3f692f1c 0064F (v01 SataRe SataPri 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f69288a 00692 (v01 SataRe SataSec 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f691d70 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f691cca 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f6917e4 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@xxxxxxxxxxxxxxx
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f690
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f690
[ 0.000000] On node 0 totalpages: 259615
[ 0.000000] free_area_init_node: node 0, pgdat c0801fc0, node_mem_map c1001200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32148 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36416 r0 d20928 u2097152
[ 0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257585
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-28-generic root=UUID=06cf8326-880f-447e-b3ba-62ee47d84076 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5194240 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Subtract (52 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 00009a4adc] TEXT DATA BSS
[ 0.000000] #3 [002eee7000 - 002f92c000] RAMDISK
[ 0.000000] #4 [00009a5000 - 00009a81d8] BRK
[ 0.000000] #5 [00000f7110 - 0000100000] BIOS reserved
[ 0.000000] #6 [00000f7100 - 00000f7110] MP-table mpf
[ 0.000000] #7 [000009f800 - 000009fd71] BIOS reserved
[ 0.000000] #8 [000009ff05 - 00000f7100] BIOS reserved
[ 0.000000] #9 [000009fd71 - 000009ff05] MP-table mpc
[ 0.000000] #10 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #11 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #12 [0000015000 - 0000016000] PGTABLE
[ 0.000000] #13 [0001000000 - 0001001000] BOOTMEM
[ 0.000000] #14 [0001001000 - 00017f1000] BOOTMEM
[ 0.000000] #15 [00017f1000 - 00017f1004] BOOTMEM
[ 0.000000] #16 [00017f1040 - 00017f1100] BOOTMEM
[ 0.000000] #17 [00017f1100 - 00017f1154] BOOTMEM
[ 0.000000] #18 [00017f1180 - 00017f4180] BOOTMEM
[ 0.000000] #19 [00017f4180 - 00017f418c] BOOTMEM
[ 0.000000] #20 [00017f41c0 - 00017f47c0] BOOTMEM
[ 0.000000] #21 [00017f47c0 - 00017f47e5] BOOTMEM
[ 0.000000] #22 [00017f4800 - 00017f4827] BOOTMEM
[ 0.000000] #23 [00017f4840 - 00017f49c8] BOOTMEM
[ 0.000000] #24 [00017f4a00 - 00017f4a40] BOOTMEM
[ 0.000000] #25 [00017f4a40 - 00017f4a80] BOOTMEM
[ 0.000000] #26 [00017f4a80 - 00017f4ac0] BOOTMEM
[ 0.000000] #27 [00017f4ac0 - 00017f4b00] BOOTMEM
[ 0.000000] #28 [00017f4b00 - 00017f4b40] BOOTMEM
[ 0.000000] #29 [00017f4b40 - 00017f4b80] BOOTMEM
[ 0.000000] #30 [00017f4b80 - 00017f4bc0] BOOTMEM
[ 0.000000] #31 [00017f4bc0 - 00017f4c00] BOOTMEM
[ 0.000000] #32 [00017f4c00 - 00017f4c40] BOOTMEM
[ 0.000000] #33 [00017f4c40 - 00017f4c80] BOOTMEM
[ 0.000000] #34 [00017f4c80 - 00017f4cc0] BOOTMEM
[ 0.000000] #35 [00017f4cc0 - 00017f4d00] BOOTMEM
[ 0.000000] #36 [00017f4d00 - 00017f4d40] BOOTMEM
[ 0.000000] #37 [00017f4d40 - 00017f4d50] BOOTMEM
[ 0.000000] #38 [00017f4d80 - 00017f4dea] BOOTMEM
[ 0.000000] #39 [00017f4e00 - 00017f4e6a] BOOTMEM
[ 0.000000] #40 [0001800000 - 000180e000] BOOTMEM
[ 0.000000] #41 [0001a00000 - 0001a0e000] BOOTMEM
[ 0.000000] #42 [00017f6e80 - 00017f6e84] BOOTMEM
[ 0.000000] #43 [00017f6ec0 - 00017f6ec4] BOOTMEM
[ 0.000000] #44 [00017f6f00 - 00017f6f08] BOOTMEM
[ 0.000000] #45 [00017f6f40 - 00017f6f48] BOOTMEM
[ 0.000000] #46 [00017f6f80 - 00017f7028] BOOTMEM
[ 0.000000] #47 [00017f7040 - 00017f70a8] BOOTMEM
[ 0.000000] #48 [00017f70c0 - 00017fb0c0] BOOTMEM
[ 0.000000] #49 [000180e000 - 000188e000] BOOTMEM
[ 0.000000] #50 [000188e000 - 00018ce000] BOOTMEM
[ 0.000000] #51 [0001a0e000 - 0001f02200] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f690)
[ 0.000000] Memory: 1004924k/1038912k available (4935k kernel code, 33536k reserved, 2337k data, 688k init, 129608k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc081b000 - 0xc08c7000 ( 688 kB)
[ 0.000000] .data : 0xc05d1fde - 0xc081a7a8 (2337 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05d1fde (4935 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2000.331 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.66 BogoMIPS (lpj=8001324)
[ 0.004011] pid_max: default: 32768 minimum: 301
[ 0.004030] Security Framework initialized
[ 0.004048] AppArmor: AppArmor initialized
[ 0.004050] Yama: becoming mindful.
[ 0.004110] Mount-cache hash table entries: 512
[ 0.004246] Initializing cgroup subsys ns
[ 0.004251] Initializing cgroup subsys cpuacct
[ 0.004256] Initializing cgroup subsys memory
[ 0.004265] Initializing cgroup subsys devices
[ 0.004268] Initializing cgroup subsys freezer
[ 0.004271] Initializing cgroup subsys net_cls
[ 0.004302] CPU: Physical Processor ID: 0
[ 0.004304] CPU: Processor Core ID: 0
[ 0.004307] mce: CPU supports 6 MCE banks
[ 0.004317] CPU0: Thermal monitoring handled by SMI
[ 0.004320] using mwait in idle threads.
[ 0.004327] Performance Events: Core events, core PMU driver.
[ 0.004337] ... version: 1
[ 0.004339] ... bit width: 40
[ 0.004341] ... generic registers: 2
[ 0.004344] ... value mask: 000000ffffffffff
[ 0.004346] ... max period: 000000007fffffff
[ 0.004348] ... fixed-purpose events: 0
[ 0.004350] ... event mask: 0000000000000003
[ 0.010756] ACPI: Core revision 20100428
[ 0.024009] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.024015] ftrace: allocating 21762 entries in 43 pages
[ 0.028066] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028450] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070295] CPU0: Intel(R) Core(TM) Duo CPU T2450 @ 2.00GHz stepping 0c
[ 0.072000] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.160021] Brought up 2 CPUs
[ 0.160026] Total of 2 processors activated (8000.61 BogoMIPS).
[ 0.160585] devtmpfs: initialized
[ 0.161127] regulator: core version 0.5
[ 0.161161] Time: 4:41:21 Date: 01/22/11
[ 0.161205] NET: Registered protocol family 16
[ 0.161235] Trying to unpack rootfs image as initramfs...
[ 0.161354] EISA bus registered
[ 0.161363] ACPI: bus type pci registered
[ 0.161450] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.161454] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.161457] PCI: Using MMCONFIG for extended config space
[ 0.161459] PCI: Using configuration type 1 for base access
[ 0.168085] bio: create slab <bio-0> at 0
[ 0.169900] ACPI: EC: Look up EC in DSDT
[ 0.173681] ACPI: BIOS _OSI(Linux) query ignored
[ 0.174924] ACPI: SSDT 3f69254e 0027F (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.175402] ACPI: Dynamic OEM Table Load:
[ 0.175406] ACPI: SSDT (null) 0027F (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.175748] ACPI: SSDT 3f691fcf 004FA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.176242] ACPI: Dynamic OEM Table Load:
[ 0.176246] ACPI: SSDT (null) 004FA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.176706] ACPI: SSDT 3f6927cd 000BD (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.177174] ACPI: Dynamic OEM Table Load:
[ 0.177178] ACPI: SSDT (null) 000BD (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.177340] ACPI: SSDT 3f6924c9 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.177797] ACPI: Dynamic OEM Table Load:
[ 0.177801] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.187674] ACPI: Interpreter enabled
[ 0.187674] ACPI: (supports S0 S3 S4 S5)
[ 0.187674] ACPI: Using IOAPIC for interrupt routing
[ 0.200316] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.200776] ACPI: No dock devices found.
[ 0.200782] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.201405] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.202620] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.202623] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.202627] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.202630] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.202633] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.202637] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[ 0.202713] pci 0000:00:02.0: reg 10: [mem 0xdc100000-0xdc17ffff]
[ 0.202719] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.202725] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[ 0.202731] pci 0000:00:02.0: reg 1c: [mem 0xdc200000-0xdc23ffff]
[ 0.202773] pci 0000:00:02.1: reg 10: [mem 0xdc180000-0xdc1fffff]
[ 0.202891] pci 0000:00:1b.0: reg 10: [mem 0xdc240000-0xdc243fff 64bit]
[ 0.202957] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.202963] pci 0000:00:1b.0: PME# disabled
[ 0.203068] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.203073] pci 0000:00:1c.0: PME# disabled
[ 0.203180] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.203185] pci 0000:00:1c.1: PME# disabled
[ 0.203297] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.203303] pci 0000:00:1c.2: PME# disabled
[ 0.203373] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.203441] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.203508] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.203575] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.203640] pci 0000:00:1d.7: reg 10: [mem 0xdc444000-0xdc4443ff]
[ 0.203709] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.203715] pci 0000:00:1d.7: PME# disabled
[ 0.203890] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.203895] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.203902] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0068 (mask 0007)
[ 0.203962] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.203971] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.203979] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.203988] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.204009] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.204065] pci 0000:00:1f.2: reg 10: [io 0x18d0-0x18d7]
[ 0.204075] pci 0000:00:1f.2: reg 14: [io 0x18c4-0x18c7]
[ 0.204084] pci 0000:00:1f.2: reg 18: [io 0x18c8-0x18cf]
[ 0.204093] pci 0000:00:1f.2: reg 1c: [io 0x18c0-0x18c3]
[ 0.204102] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf]
[ 0.204110] pci 0000:00:1f.2: reg 24: [mem 0xdc444400-0xdc4447ff]
[ 0.204142] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.204148] pci 0000:00:1f.2: PME# disabled
[ 0.204211] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
[ 0.204407] pci 0000:02:00.0: reg 10: [mem 0xd6000000-0xd600ffff 64bit]
[ 0.204519] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.204526] pci 0000:02:00.0: PME# disabled
[ 0.212070] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.212079] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.212085] pci 0000:00:1c.0: bridge window [mem 0xd6000000-0xd7ffffff]
[ 0.212094] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.212205] pci 0000:03:00.0: reg 10: [mem 0xd8000000-0xd8003fff]
[ 0.212307] pci 0000:03:00.0: supports D1 D2
[ 0.212339] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.212353] pci 0000:00:1c.1: PCI bridge to [bus 03-04]
[ 0.212359] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.212364] pci 0000:00:1c.1: bridge window [mem 0xd8000000-0xd9ffffff]
[ 0.212373] pci 0000:00:1c.1: bridge window [mem 0xd2000000-0xd3ffffff 64bit pref]
[ 0.212438] pci 0000:00:1c.2: PCI bridge to [bus 05-06]
[ 0.212444] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.212450] pci 0000:00:1c.2: bridge window [mem 0xda000000-0xdbffffff]
[ 0.212459] pci 0000:00:1c.2: bridge window [mem 0xd4000000-0xd5ffffff 64bit pref]
[ 0.212543] pci 0000:0a:06.0: reg 10: [mem 0xdc000000-0xdc000fff]
[ 0.212553] pci 0000:0a:06.0: reg 14: [mem 0xdc002000-0xdc0027ff]
[ 0.212623] pci 0000:0a:06.0: supports D1 D2
[ 0.212625] pci 0000:0a:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.212632] pci 0000:0a:06.0: PME# disabled
[ 0.212682] pci 0000:0a:06.2: reg 10: [mem 0xdc002800-0xdc0028ff]
[ 0.212763] pci 0000:0a:06.2: supports D1 D2
[ 0.212766] pci 0000:0a:06.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.212772] pci 0000:0a:06.2: PME# disabled
[ 0.212821] pci 0000:0a:06.3: reg 10: [mem 0xdc001000-0xdc001fff]
[ 0.212902] pci 0000:0a:06.3: supports D1 D2
[ 0.212904] pci 0000:0a:06.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.212911] pci 0000:0a:06.3: PME# disabled
[ 0.212982] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
[ 0.212988] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.212994] pci 0000:00:1e.0: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.213003] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.213007] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.213010] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.213039] pci_bus 0000:00: on NUMA node 0
[ 0.213055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.213336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.213429] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.213521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.213654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.223417] ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11)
[ 0.223530] ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11)
[ 0.223644] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[ 0.223751] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
[ 0.223859] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.223967] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 *11)
[ 0.224087] ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11)
[ 0.224197] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
[ 0.224247] HEST: Table is not found!
[ 0.224345] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.224363] vgaarb: loaded
[ 0.224561] SCSI subsystem initialized
[ 0.224676] libata version 3.00 loaded.
[ 0.224743] usbcore: registered new interface driver usbfs
[ 0.224757] usbcore: registered new interface driver hub
[ 0.224786] usbcore: registered new device driver usb
[ 0.225287] ACPI: WMI: Mapper loaded
[ 0.225290] PCI: Using ACPI for IRQ routing
[ 0.225293] PCI: pci_cache_line_size set to 64 bytes
[ 0.225466] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.225469] reserve RAM buffer: 000000003f690000 - 000000003fffffff
[ 0.225588] NetLabel: Initializing
[ 0.225591] NetLabel: domain hash size = 128
[ 0.225592] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.225608] NetLabel: unlabeled traffic allowed by default
[ 0.225644] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.225652] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.225658] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.232037] Switching to clocksource tsc
[ 0.244464] AppArmor: AppArmor Filesystem Enabled
[ 0.244491] pnp: PnP ACPI init
[ 0.244519] ACPI: bus type pnp registered
[ 0.248405] pnp: PnP ACPI: found 11 devices
[ 0.248408] ACPI: ACPI bus type pnp unregistered
[ 0.248413] PnPBIOS: Disabled by ACPI PNP
[ 0.248429] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.248433] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.248436] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.248440] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.248443] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.248447] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.248450] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.248453] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.248462] system 00:06: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.248469] system 00:08: [io 0x0800-0x080f] has been reserved
[ 0.248472] system 00:08: [io 0x1000-0x107f] has been reserved
[ 0.248475] system 00:08: [io 0x1180-0x11bf] has been reserved
[ 0.248479] system 00:08: [mem 0xff800000-0xff800fff] has been reserved
[ 0.248485] system 00:09: [io 0x06a0-0x06af] has been reserved
[ 0.248488] system 00:09: [io 0x06b0-0x06ff] has been reserved
[ 0.284806] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.284814] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.284822] pci 0000:00:1c.0: bridge window [mem 0xd6000000-0xd7ffffff]
[ 0.284829] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.284838] pci 0000:00:1c.1: PCI bridge to [bus 03-04]
[ 0.284842] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.284849] pci 0000:00:1c.1: bridge window [mem 0xd8000000-0xd9ffffff]
[ 0.284855] pci 0000:00:1c.1: bridge window [mem 0xd2000000-0xd3ffffff 64bit pref]
[ 0.284866] pci 0000:00:1c.2: PCI bridge to [bus 05-06]
[ 0.284870] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.284877] pci 0000:00:1c.2: bridge window [mem 0xda000000-0xdbffffff]
[ 0.284883] pci 0000:00:1c.2: bridge window [mem 0xd4000000-0xd5ffffff 64bit pref]
[ 0.284892] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
[ 0.284894] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.284902] pci 0000:00:1e.0: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.284908] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.284938] alloc irq_desc for 17 on node -1
[ 0.284941] alloc kstat_irqs on node -1
[ 0.284951] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.284958] pci 0000:00:1c.0: setting latency timer to 64
[ 0.284970] alloc irq_desc for 16 on node -1
[ 0.284972] alloc kstat_irqs on node -1
[ 0.284976] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.284982] pci 0000:00:1c.1: setting latency timer to 64
[ 0.284993] alloc irq_desc for 18 on node -1
[ 0.284995] alloc kstat_irqs on node -1
[ 0.284999] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.285005] pci 0000:00:1c.2: setting latency timer to 64
[ 0.285015] pci 0000:00:1e.0: setting latency timer to 64
[ 0.285022] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.285025] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.285028] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.285031] pci_bus 0000:02: resource 1 [mem 0xd6000000-0xd7ffffff]
[ 0.285034] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.285037] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.285040] pci_bus 0000:03: resource 1 [mem 0xd8000000-0xd9ffffff]
[ 0.285043] pci_bus 0000:03: resource 2 [mem 0xd2000000-0xd3ffffff 64bit pref]
[ 0.285046] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.285049] pci_bus 0000:05: resource 1 [mem 0xda000000-0xdbffffff]
[ 0.285052] pci_bus 0000:05: resource 2 [mem 0xd4000000-0xd5ffffff 64bit pref]
[ 0.285055] pci_bus 0000:0a: resource 1 [mem 0xdc000000-0xdc0fffff]
[ 0.285058] pci_bus 0000:0a: resource 4 [io 0x0000-0xffff]
[ 0.285061] pci_bus 0000:0a: resource 5 [mem 0x00000000-0xffffffff]
[ 0.285118] NET: Registered protocol family 2
[ 0.285207] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.285531] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.286355] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.286798] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.286801] TCP reno registered
[ 0.286806] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.286824] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.286969] NET: Registered protocol family 1
[ 0.286996] pci 0000:00:02.0: Boot video device
[ 0.287193] PCI: CLS 64 bytes, default 64
[ 0.287229] Simple Boot Flag at 0x36 set to 0x1
[ 0.287471] cpufreq-nforce2: No nForce2 chipset.
[ 0.287510] Scanning for low memory corruption every 60 seconds
[ 0.287673] audit: initializing netlink socket (disabled)
[ 0.287688] type=2000 audit(1295671281.284:1): initialized
[ 0.299310] highmem bounce pool size: 64 pages
[ 0.299318] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.301018] VFS: Disk quotas dquot_6.5.2
[ 0.301089] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.301791] fuse init (API version 7.14)
[ 0.301893] msgmni has been set to 1709
[ 0.468914] Freeing initrd memory: 10516k freed
[ 0.479696] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.479701] io scheduler noop registered
[ 0.479703] io scheduler deadline registered
[ 0.479724] io scheduler cfq registered (default)
[ 0.479877] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.479930] alloc irq_desc for 40 on node -1
[ 0.479933] alloc kstat_irqs on node -1
[ 0.479949] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.480070] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.480118] alloc irq_desc for 41 on node -1
[ 0.480120] alloc kstat_irqs on node -1
[ 0.480130] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.480237] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.480284] alloc irq_desc for 42 on node -1
[ 0.480286] alloc kstat_irqs on node -1
[ 0.480296] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.480425] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.480537] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.480648] intel_idle: MWAIT substates: 0x22220
[ 0.480650] intel_idle: does not run on family 6 model 14
[ 0.481572] ACPI: AC Adapter [ADP1] (off-line)
[ 0.481653] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.482599] ACPI: Lid Switch [LID0]
[ 0.482651] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.482657] ACPI: Sleep Button [SLPB]
[ 0.482726] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.482730] ACPI: Power Button [PWRF]
[ 0.482999] ACPI: acpi_idle registered with cpuidle
[ 0.485704] Marking TSC unstable due to TSC halts in idle
[ 0.485787] Switching to clocksource hpet
[ 0.502676] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.502685] ACPI: Thermal Zone [TZS0] (28 C)
[ 0.507605] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.507614] ACPI: Thermal Zone [TZS1] (35 C)
[ 0.507704] ERST: Table is not found!
[ 0.507757] isapnp: Scanning for PnP cards...
[ 0.512103] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.513959] brd: module loaded
[ 0.514621] loop: module loaded
[ 0.514820] ata_piix 0000:00:1f.1: version 2.13
[ 0.514835] alloc irq_desc for 19 on node -1
[ 0.514837] alloc kstat_irqs on node -1
[ 0.514845] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.514891] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.514984] scsi0 : ata_piix
[ 0.515112] scsi1 : ata_piix
[ 0.515769] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.515772] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.515795] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.515801] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 0.516081] ata2: port disabled. ignoring.
[ 0.608273] ACPI: Battery Slot [BAT0] (battery present)
[ 0.672021] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.672076] scsi2 : ata_piix
[ 0.672143] scsi3 : ata_piix
[ 0.673166] ata3: SATA max UDMA/133 cmd 0x18d0 ctl 0x18c4 bmdma 0x18b0 irq 19
[ 0.673169] ata4: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b8 irq 19
[ 0.673537] Fixed MDIO Bus: probed
[ 0.673577] PPP generic driver version 2.4.2
[ 0.673630] tun: Universal TUN/TAP device driver, 1.6
[ 0.673632] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 0.673718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.673739] alloc irq_desc for 23 on node -1
[ 0.673742] alloc kstat_irqs on node -1
[ 0.673747] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.673760] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.673764] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.673801] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.673827] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.673841] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.677742] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.678010] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc444000
[ 0.688393] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
[ 0.696194] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.696329] hub 1-0:1.0: USB hub found
[ 0.696336] hub 1-0:1.0: 8 ports detected
[ 0.696431] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.696447] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.696474] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.696482] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.696486] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.696525] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.696554] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 0.696683] hub 2-0:1.0: USB hub found
[ 0.696688] hub 2-0:1.0: 2 ports detected
[ 0.696766] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.696773] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.696777] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.696811] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.696850] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
[ 0.696982] hub 3-0:1.0: USB hub found
[ 0.696986] hub 3-0:1.0: 2 ports detected
[ 0.697051] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.697058] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.697062] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.697108] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.697146] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 0.697286] hub 4-0:1.0: USB hub found
[ 0.697291] hub 4-0:1.0: 2 ports detected
[ 0.697361] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.697368] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.697372] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.697406] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.697435] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[ 0.697561] hub 5-0:1.0: USB hub found
[ 0.697565] hub 5-0:1.0: 2 ports detected
[ 0.697704] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.707146] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.708080] ata1.00: configured for UDMA/33
[ 0.714953] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.714961] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.714964] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.714968] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.714971] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.715038] mice: PS/2 mouse device common for all mice
[ 0.715178] rtc_cmos 00:0a: RTC can wake from S4
[ 0.715223] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
[ 0.715256] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.715373] device-mapper: uevent: version 1.0.3
[ 0.715485] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@xxxxxxxxxx
[ 0.715561] device-mapper: multipath: version 1.1.1 loaded
[ 0.715564] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.715690] EISA: Probing bus 0 at eisa.0
[ 0.715699] Cannot allocate resource for EISA slot 1
[ 0.715702] Cannot allocate resource for EISA slot 2
[ 0.715704] Cannot allocate resource for EISA slot 3
[ 0.715707] Cannot allocate resource for EISA slot 4
[ 0.715727] EISA: Detected 0 cards.
[ 0.715887] cpuidle: using governor ladder
[ 0.716022] cpuidle: using governor menu
[ 0.716373] TCP cubic registered
[ 0.716523] NET: Registered protocol family 10
[ 0.716938] lo: Disabled Privacy Extensions
[ 0.717201] NET: Registered protocol family 17
[ 0.717842] Using IPI No-Shortcut mode
[ 0.717923] PM: Resume from disk failed.
[ 0.717937] registered taskstats version 1
[ 0.718331] Magic number: 11:176:667
[ 0.718442] rtc_cmos 00:0a: setting system clock to 2011-01-22 04:41:21 UTC (1295671281)
[ 0.718446] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.718448] EDD information not available.
[ 0.739291] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.862276] isapnp: No Plug & Play device found
[ 0.866290] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WP03 PQ: 0 ANSI: 5
[ 0.878173] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.878181] Uniform CD-ROM driver Revision: 3.20
[ 0.878416] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.878526] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.899373] ata3.00: ATA-7: WDC WD800BEVS-22RST0, 04.01G04, max UDMA/133
[ 0.899382] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.913292] ata3.00: configured for UDMA/133
[ 0.913580] scsi 2:0:0:0: Direct-Access ATA WDC WD800BEVS-22 04.0 PQ: 0 ANSI: 5
[ 0.913716] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 0.913728] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 0.913847] sd 2:0:0:0: [sda] Write Protect is off
[ 0.913850] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.913920] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.914286] sda: sda1 sda2 < sda5 >
[ 0.957332] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.957406] Freeing unused kernel memory: 688k freed
[ 0.957899] Write protecting the kernel text: 4936k
[ 0.957962] Write protecting the kernel read-only data: 1980k
[ 0.975370] udev[83]: starting version 163
[ 1.103705] tg3.c:v3.110 (April 9, 2010)
[ 1.103773] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.103785] tg3 0000:02:00.0: setting latency timer to 64
[ 1.152596] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:1d:72:1e:4a:5b
[ 1.152602] tg3 0000:02:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.152606] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.152609] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.165137] sdhci: Secure Digital Host Controller Interface driver
[ 1.165142] sdhci: Copyright(c) Pierre Ossman
[ 1.168209] sdhci-pci 0000:0a:06.2: SDHCI controller found [1217:7120] (rev 2)
[ 1.168237] alloc irq_desc for 22 on node -1
[ 1.168244] alloc kstat_irqs on node -1
[ 1.168249] sdhci-pci 0000:0a:06.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.168354] mmc0: Unknown controller version (2). You may experience problems.
[ 1.168417] Registered led device: mmc0::
[ 1.168472] mmc0: SDHCI controller on PCI [0000:0a:06.2] using DMA
[ 1.172422] firewire_ohci 0000:0a:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.276056] firewire_ohci: Added fw-ohci device 0000:0a:06.0, OHCI v1.10, 8 IR + 8 IT contexts, quirks 0x0
[ 1.380706] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.776284] firewire_core: created device fw0: GUID 001d72ffff1e4a5b, S400
[ 16.616776] udev[373]: starting version 163
[ 16.644811] lp: driver loaded but no devices found
[ 16.717299] Adding 3069948k swap on /dev/sda5. Priority:-1 extents:1 across:3069948k
[ 16.827735] intel_rng: FWH not detected
[ 16.837509] leds_ss4200: no LED devices found
[ 16.864579] acpi device:03: registered as cooling_device2
[ 16.864720] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 16.864786] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 16.866293] lib80211: common routines for IEEE802.11 drivers
[ 16.866296] lib80211_crypt: registered algorithm 'NULL'
[ 16.927509] Linux agpgart interface v0.103
[ 16.931715] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 16.932394] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 16.940779] wl: module license 'MIXED/Proprietary' taints kernel.
[ 16.940784] Disabling lock debugging due to kernel taint
[ 16.968428] wl 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 16.968438] wl 0000:03:00.0: setting latency timer to 64
[ 16.978186] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 16.980634] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 16.999163] acer-wmi: Brightness must be controlled by generic video driver
[ 17.015081] lib80211_crypt: registered algorithm 'TKIP'
[ 17.015206] eth1: Broadcom BCM4311 802.11 Hybrid Wireless Controller 5.60.48.36
[ 17.072511] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 17.109507] [drm] Initialized drm 1.1.0 20060810
[ 17.146055] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 17.146097] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 17.146109] alloc irq_desc for 21 on node -1
[ 17.146112] alloc kstat_irqs on node -1
[ 17.146122] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 17.146192] alloc irq_desc for 43 on node -1
[ 17.146194] alloc kstat_irqs on node -1
[ 17.146207] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 17.146249] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 17.206513] hda_codec: ALC268: BIOS auto-probing.
[ 17.229182] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.229189] i915 0000:00:02.0: setting latency timer to 64
[ 17.237916] [drm] set up 7M of stolen space
[ 17.344887] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 17.345451] [drm] initialized overlay support
[ 17.737053] Skipping EDID probe due to cached edid
[ 17.745716] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000/0x0
[ 17.799770] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input5
[ 17.835930] alloc irq_desc for 44 on node -1
[ 17.835934] alloc kstat_irqs on node -1
[ 17.835953] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[ 18.021305] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.044082] type=1400 audit(1295671298.821:2): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=874 comm="apparmor_parser"
[ 18.248719] Console: switching to colour frame buffer device 160x50
[ 18.253303] fb0: inteldrmfb frame buffer device
[ 18.253306] drm: registered panic notifier
[ 18.265019] Slow work thread pool: Starting up
[ 18.277024] Slow work thread pool: Ready
[ 18.277043] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 18.290377] type=1400 audit(1295671299.069:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=875 comm="apparmor_parser"
[ 18.290537] type=1400 audit(1295671299.069:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=875 comm="apparmor_parser"
[ 18.290631] type=1400 audit(1295671299.069:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=875 comm="apparmor_parser"
[ 18.340058] Skipping EDID probe due to cached edid
[ 18.607660] type=1400 audit(1295671299.385:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=899 comm="apparmor_parser"
[ 18.607948] type=1400 audit(1295671299.385:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=899 comm="apparmor_parser"
[ 18.840667] type=1400 audit(1295671299.617:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=973 comm="apparmor_parser"
[ 19.046289] type=1400 audit(1295671299.825:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=975 comm="apparmor_parser"
[ 19.046590] type=1400 audit(1295671299.825:10): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=975 comm="apparmor_parser"
[ 19.073592] ppdev: user-space parallel port driver
[ 19.081175] Skipping EDID probe due to cached edid
[ 19.404158] Skipping EDID probe due to cached edid
[ 20.768077] Skipping EDID probe due to cached edid
[ 21.093087] Skipping EDID probe due to cached edid
[ 21.424076] Skipping EDID probe due to cached edid
[ 22.081084] Skipping EDID probe due to cached edid
[ 22.441798] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 23.737096] Skipping EDID probe due to cached edid
[ 25.089290] type=1400 audit(1295671305.869:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=891 comm="apparmor_parser"
[ 25.090761] type=1400 audit(1295671305.869:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=891 comm="apparmor_parser"
[ 25.091808] type=1400 audit(1295671305.869:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=891 comm="apparmor_parser"
[ 26.445850] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 26.445855] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[ 26.445856] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[ 26.445858] vboxdrv: the usage of hardware performance counters by
[ 26.445859] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 26.445864] vboxdrv: Found 2 processor cores.
[ 26.446129] vboxdrv: fAsync=0 offMin=0x438 offMax=0x19f5
[ 26.446808] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 26.446812] vboxdrv: Successfully loaded version 3.2.8_OSE (interface 0x00140001).
[ 26.936121] Skipping EDID probe due to cached edid
[ 29.448077] eth1: no IPv6 routers present
[ 44.119594] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 106.616156] eth1: no IPv6 routers present
[ 765.888749] tg3 0000:02:00.0: PME# enabled
[ 765.888786] tg3 0000:02:00.0: wake-up capability enabled by ACPI
[ 766.214199] tg3 0000:02:00.0: wake-up capability disabled by ACPI
[ 766.214248] tg3 0000:02:00.0: PME# disabled
[ 766.232233] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[ 766.402923] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 777.296041] eth1: no IPv6 routers present
[ 3685.204223] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 3685.205922] SGI XFS Quota Management subsystem
[ 3685.216795] JFS: nTxBlock = 7938, nTxLock = 63508
[ 3685.583205] NTFS driver 2.1.29 [Flags: R/O MODULE].
[ 3685.626620] QNX4 filesystem 0.2.3 registered.
[ 3685.664849] Btrfs loaded
[ 3688.938424] type=1400 audit(1295674969.717:14): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=15931 comm="apparmor_parser"
[ 3688.938580] type=1400 audit(1295674969.717:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=15931 comm="apparmor_parser"
[ 3688.938681] type=1400 audit(1295674969.717:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=15931 comm="apparmor_parser"
Module Size Used by
snd_intel8x0m 10731 0
snd_ac97_codec 99227 1 snd_intel8x0m
ac97_bus 1014 1 snd_ac97_codec
btrfs 489451 0
zlib_deflate 19266 1 btrfs
crc32c 2531 1
libcrc32c 887 1 btrfs
ufs 73069 0
qnx4 6877 0
hfsplus 71312 0
hfs 41250 0
minix 25303 0
ntfs 95030 0
vfat 9201 0
msdos 6436 0
fat 48240 2 vfat,msdos
jfs 171034 0
xfs 693320 0
exportfs 3449 1 xfs
reiserfs 225974 0
binfmt_misc 6599 1
vboxnetadp 6454 0
vboxnetflt 15152 0
vboxdrv 190199 2 vboxnetadp,vboxnetflt
parport_pc 26058 0
ppdev 5556 0
joydev 8767 0
snd_hda_codec_realtek 218492 1
i915 295435 4
snd_hda_intel 22235 2
snd_hda_codec 87552 2 snd_hda_codec_realtek,snd_hda_intel
drm_kms_helper 30200 1 i915
snd_hwdep 5040 1 snd_hda_codec
drm 168060 4 i915,drm_kms_helper
snd_pcm 71475 4 snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec
snd_seq_midi 4588 0
snd_rawmidi 17783 1 snd_seq_midi
snd_seq_midi_event 6047 1 snd_seq_midi
snd_seq 47174 2 snd_seq_midi,snd_seq_midi_event
lib80211_crypt_tkip 7736 0
snd_timer 19067 2 snd_pcm,snd_seq
snd_seq_device 5744 3 snd_seq_midi,snd_rawmidi,snd_seq
acer_wmi 13929 0
wl 1959533 0
i2c_algo_bit 5168 1 i915
snd 49038 15 snd_intel8x0m,snd_ac97_codec,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
intel_agp 26566 2 i915
psmouse 59033 0
soundcore 880 1 snd
lib80211 5058 2 lib80211_crypt_tkip,wl
agpgart 32011 2 drm,intel_agp
serio_raw 4022 0
snd_page_alloc 7120 3 snd_intel8x0m,snd_hda_intel,snd_pcm
video 18712 1 i915
output 1883 1 video
lp 7342 0
parport 31492 3 parport_pc,ppdev,lp
firewire_ohci 21234 0
sdhci_pci 6601 0
firewire_core 46643 1 firewire_ohci
sdhci 15922 1 sdhci_pci
led_class 2633 2 acer_wmi,sdhci
crc_itu_t 1383 1 firewire_core
tg3 123310 0
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.35-28-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.23
Linux version 2.6.35-28-generic (buildd@roseapple) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #49-Ubuntu SMP Tue Mar 1 14:40:58 UTC 2011
scanModem update of: 2011_02_04
Distrib_ID=Ubuntu
DistribCodeName=maverick
AptRepositoryStem=http://us.archive.ubuntu.com/ubuntu/
The dkms driver upgrade utilities are installed,
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_intel8x0m snd_hda_intel
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
High Definition Audio cards can host modem chips.
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 1025:012f Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller
Modem interrupt assignment and sharing:
43: 946 0 PCI-MSI-edge hda_intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.202891] pci 0000:00:1b.0: reg 10: [mem 0xdc240000-0xdc243fff 64bit]
[ 0.202957] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.202963] pci 0000:00:1b.0: PME# disabled
[ 17.146055] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 17.146097] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 17.146122] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 17.146207] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 17.146249] HDA Intel 0000:00:1b.0: setting latency timer to 64
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1
00-01: ALC268 Digital : ALC268 Digital : playback 1
00-02: ALC268 Analog : ALC268 Analog : capture 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xdc240000 irq 43
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.35-28-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.35-22-generic/kernel/sound/pci/hda/snd-hda-intel.ko
The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Conexant ID 2c06
Address: 1
Function Id: 0x2
Vendor Id: 0x14f12c06
Subsystem Id: 0x10250093
Revision Id: 0x100000
Modem Function Group: 0x2
The audio card hosts a softmodem chip: 0x14f12c06
14f1 is the Conexant Vendor ID, and 0x14f12c06 a softmodem chipset.
Get a hsfmodem package through http://www.linuxant.com
If not a Conexant modem, the driver hsfmodem-drivers with its dependent drivers:
----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=1025:012f
IRQ=43
HDA2=00:1b.0
SOFT=8086:27d8.HDA
CodecDiagnosed=Conexant_
HDAchipVendorID=14f1
CHIP=0x14f12c06
IDENT=hsfmodem
Driver=hsfmodem-drivers
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller
Primary device ID: 8086:27d8
Subsystem PCI_id 1025:012f
Softmodem codec or chipset from diagnostics: Conexant_0x14f12c06
from Archives:
The HDA card softmodem chip is 0x14f12c06
Support type needed or chipset: hsfmodem
Writing DOCs/Intel.txt
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
Modem support packages from Linuxant include resources for compiling drivers.
If an installer package matching your kernel_version is not provided,
just install a generic code package.
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.05full_k2.6.35_28_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
The directions following below need only be pursued, if the above procedures are not adequate.
Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.35_28_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.5
and the compiler used in kernel assembly: 4.4.5
linux-headers-2.6.35-28-generic resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
linux-headers-2.6.35-28-generic
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
