I've got an old all-in-one PC with Ubuntu 10.010 - Maverick Meerkat O.S.
based on an Intel P4.
I would like to use the Efax-gtk to send fax with an integrated PCI
modem card.
The message I can read is the following in dmesg.txt file:
[ 0.193885] pci 0000:00:1f.6: reg 10: [io 0x1800-0x18ff]
[ 0.193895] pci 0000:00:1f.6: reg 14: [io 0x1c00-0x1c7f]
[ 0.193943] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.193949] pci 0000:00:1f.6: PME# disabled
How can I enable it and have it working if possible?
Thanks in advance
Roberto Raimondi
CLASS=0703
NAME="Modem: Intel Corporation 82801EB/ER "
PCIDEV=8086:24d6
SUBSYS=0986:002d
IRQ=17
SOFT=8086:24d6.MC97
CPU0 CPU1
0: 1339 1 IO-APIC-edge timer
1: 6182 3796 IO-APIC-edge i8042
4: 8 0 IO-APIC-edge serial
6: 3 0 IO-APIC-edge floppy
7: 0 0 IO-APIC-edge parport0
8: 1 0 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 4 0 IO-APIC-edge i8042
14: 294446 0 IO-APIC-edge ata_piix
15: 895506 0 IO-APIC-edge ata_piix
16: 118902 415079 IO-APIC-fasteoi uhci_hcd:usb2, uhci_hcd:usb5, yenta, i915
17: 52761 2534 IO-APIC-fasteoi yenta, Intel ICH5
18: 1001887 0 IO-APIC-fasteoi uhci_hcd:usb4, eth0
19: 53 12705 IO-APIC-fasteoi uhci_hcd:usb3
23: 6 0 IO-APIC-fasteoi ehci_hcd:usb1
NMI: 0 0 Non-maskable interrupts
LOC: 29611197 29414666 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
PND: 0 0 Performance pending work
RES: 15960220 17319152 Rescheduling interrupts
CAL: 405 265 Function call interrupts
TLB: 57432 56780 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 598 598 Machine check polls
ERR: 0
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-28-generic (buildd@roseapple) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #49-Ubuntu SMP Tue Mar 1 14:40:58 UTC 2011 (Ubuntu 2.6.35-28.49-generic 2.6.35.11)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002df70000 (usable)
[ 0.000000] BIOS-e820: 000000002df70000 - 000000002df7c000 (ACPI data)
[ 0.000000] BIOS-e820: 000000002df7c000 - 000000002df80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002df80000 - 0000000030000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x2df70 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 020000000 mask FF0000000 write-back
[ 0.000000] 2 base 02DF80000 mask FFFF80000 uncachable
[ 0.000000] 3 base 02E000000 mask FFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d8000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000002df70000 (usable)
[ 0.000000] modified: 000000002df70000 - 000000002df7c000 (ACPI data)
[ 0.000000] modified: 000000002df7c000 - 000000002df80000 (ACPI NVS)
[ 0.000000] modified: 000000002df80000 - 0000000030000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] modified: 00000000fffffc00 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] found SMP MP-table at [c00f6aa0] f6aa0
[ 0.000000] init_memory_mapping: 0000000000000000-000000002df70000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 002dc00000 page 2M
[ 0.000000] 002dc00000 - 002df70000 page 4k
[ 0.000000] kernel direct mapping tables up to 2df70000 @ 15000-1a000
[ 0.000000] RAMDISK: 21d8f000 - 227d4000
[ 0.000000] ACPI: RSDP 000f6b10 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 2df777a1 00034 (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 2df7becf 00074 (v01 INTEL SPDG 06040000 PTL 00000003)
[ 0.000000] ACPI: DSDT 2df777d5 046FA (v01 INTEL SPRGDLEG 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 2df7cfc0 00040
[ 0.000000] ACPI: APIC 2df7bf43 0005E (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 2df7bfa1 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 2df7bfc9 00037 (v01 PTLTD ACPIHT 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 735MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2df70000
[ 0.000000] low ram: 0 - 2df70000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002df70
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0002df70
[ 0.000000] On node 0 totalpages: 188159
[ 0.000000] free_area_init_node: node 0, pgdat c0801fc0, node_mem_map c1001200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1439 pages used for memmap
[ 0.000000] Normal zone: 182737 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000
[ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:cec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36416 r0 d20928 u2097152
[ 0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186688
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-28-generic root=UUID=660e8d93-9709-40eb-9d6f-8b126297e461 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 3765120 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Subtract (47 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 00009a4adc] TEXT DATA BSS
[ 0.000000] #3 [0021d8f000 - 00227d4000] RAMDISK
[ 0.000000] #4 [00009a5000 - 00009a8134] BRK
[ 0.000000] #5 [00000f6ab0 - 0000100000] BIOS reserved
[ 0.000000] #6 [00000f6aa0 - 00000f6ab0] MP-table mpf
[ 0.000000] #7 [000009f800 - 000009fd70] BIOS reserved
[ 0.000000] #8 [000009feb0 - 00000f6aa0] BIOS reserved
[ 0.000000] #9 [000009fd70 - 000009feb0] MP-table mpc
[ 0.000000] #10 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #11 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #12 [0000015000 - 0000016000] PGTABLE
[ 0.000000] #13 [0001000000 - 0001001000] BOOTMEM
[ 0.000000] #14 [0001001000 - 00015c1000] BOOTMEM
[ 0.000000] #15 [00015c1000 - 00015c1004] BOOTMEM
[ 0.000000] #16 [00015c1040 - 00015c1100] BOOTMEM
[ 0.000000] #17 [00015c1100 - 00015c1144] BOOTMEM
[ 0.000000] #18 [00015c1180 - 00015c4180] BOOTMEM
[ 0.000000] #19 [00015c4180 - 00015c41a7] BOOTMEM
[ 0.000000] #20 [00015c41c0 - 00015c4310] BOOTMEM
[ 0.000000] #21 [00015c4340 - 00015c4380] BOOTMEM
[ 0.000000] #22 [00015c4380 - 00015c43c0] BOOTMEM
[ 0.000000] #23 [00015c43c0 - 00015c4400] BOOTMEM
[ 0.000000] #24 [00015c4400 - 00015c4440] BOOTMEM
[ 0.000000] #25 [00015c4440 - 00015c4480] BOOTMEM
[ 0.000000] #26 [00015c4480 - 00015c44c0] BOOTMEM
[ 0.000000] #27 [00015c44c0 - 00015c4500] BOOTMEM
[ 0.000000] #28 [00015c4500 - 00015c4540] BOOTMEM
[ 0.000000] #29 [00015c4540 - 00015c4580] BOOTMEM
[ 0.000000] #30 [00015c4580 - 00015c45c0] BOOTMEM
[ 0.000000] #31 [00015c45c0 - 00015c4600] BOOTMEM
[ 0.000000] #32 [00015c4600 - 00015c4610] BOOTMEM
[ 0.000000] #33 [00015c4640 - 00015c46aa] BOOTMEM
[ 0.000000] #34 [00015c46c0 - 00015c472a] BOOTMEM
[ 0.000000] #35 [0001800000 - 000180e000] BOOTMEM
[ 0.000000] #36 [0001a00000 - 0001a0e000] BOOTMEM
[ 0.000000] #37 [00015c6740 - 00015c6744] BOOTMEM
[ 0.000000] #38 [00015c6780 - 00015c6784] BOOTMEM
[ 0.000000] #39 [00015c67c0 - 00015c67c8] BOOTMEM
[ 0.000000] #40 [00015c6800 - 00015c6808] BOOTMEM
[ 0.000000] #41 [00015c6840 - 00015c68e8] BOOTMEM
[ 0.000000] #42 [00015c6900 - 00015c6968] BOOTMEM
[ 0.000000] #43 [00015c6980 - 00015ca980] BOOTMEM
[ 0.000000] #44 [00015ca980 - 000164a980] BOOTMEM
[ 0.000000] #45 [000164a980 - 000168a980] BOOTMEM
[ 0.000000] #46 [0001a0e000 - 0001da5380] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 722740k/753088k available (4935k kernel code, 29896k reserved, 2337k data, 688k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xee770000 - 0xff7fe000 ( 272 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xedf70000 ( 735 MB)
[ 0.000000] .init : 0xc081b000 - 0xc08c7000 ( 688 kB)
[ 0.000000] .data : 0xc05d1fde - 0xc081a7a8 (2337 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05d1fde (4935 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2992.426 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.85 BogoMIPS (lpj=11969704)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.004035] Security Framework initialized
[ 0.004059] AppArmor: AppArmor initialized
[ 0.004062] Yama: becoming mindful.
[ 0.004133] Mount-cache hash table entries: 512
[ 0.004316] Initializing cgroup subsys ns
[ 0.004322] Initializing cgroup subsys cpuacct
[ 0.004328] Initializing cgroup subsys memory
[ 0.004341] Initializing cgroup subsys devices
[ 0.004344] Initializing cgroup subsys freezer
[ 0.004348] Initializing cgroup subsys net_cls
[ 0.004386] CPU: Physical Processor ID: 0
[ 0.004389] CPU: Processor Core ID: 0
[ 0.004393] mce: CPU supports 4 MCE banks
[ 0.004405] CPU0: Thermal monitoring enabled (TM1)
[ 0.004421] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.004440] ... version: 0
[ 0.004442] ... bit width: 40
[ 0.004444] ... generic registers: 18
[ 0.004447] ... value mask: 000000ffffffffff
[ 0.004450] ... max period: 0000007fffffffff
[ 0.004452] ... fixed-purpose events: 0
[ 0.004455] ... event mask: 000000000003ffff
[ 0.008587] ACPI: Core revision 20100428
[ 0.016011] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.016020] ftrace: allocating 21762 entries in 43 pages
[ 0.020129] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020435] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.024000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.024000] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.024000] ..... (found apic 0 pin 0) ...
[ 0.070668] ....... works.
[ 0.070672] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[ 0.072000] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.160034] Brought up 2 CPUs
[ 0.160042] Total of 2 processors activated (11970.21 BogoMIPS).
[ 0.160402] devtmpfs: initialized
[ 0.161353] regulator: core version 0.5
[ 0.161381] Time: 14:07:51 Date: 03/26/11
[ 0.161453] NET: Registered protocol family 16
[ 0.161510] Trying to unpack rootfs image as initramfs...
[ 0.161747] EISA bus registered
[ 0.161767] ACPI: bus type pci registered
[ 0.164631] PCI: PCI BIOS revision 2.10 entry at 0xfd9c2, last bus=3
[ 0.164636] PCI: Using configuration type 1 for base access
[ 0.166906] bio: create slab <bio-0> at 0
[ 0.169097] ACPI: EC: Look up EC in DSDT
[ 0.175224] ACPI: Interpreter enabled
[ 0.175234] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.175277] ACPI: Using IOAPIC for interrupt routing
[ 0.185352] ACPI: No dock devices found.
[ 0.185363] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.187696] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.192655] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.192663] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.192675] pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
[ 0.192681] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.192690] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.192703] pci_root PNP0A03:00: host bridge window [mem 0x30000000-0xfebfffff] (ignored)
[ 0.192710] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.192746] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[ 0.192760] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x07ffffff pref]
[ 0.192846] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.192856] pci 0000:00:02.0: reg 14: [mem 0xe8000000-0xe807ffff]
[ 0.192865] pci 0000:00:02.0: reg 18: [io 0x2070-0x2077]
[ 0.192928] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
[ 0.193040] pci 0000:00:1d.0: reg 20: [io 0x1cc0-0x1cdf]
[ 0.193106] pci 0000:00:1d.1: reg 20: [io 0x1ce0-0x1cff]
[ 0.193172] pci 0000:00:1d.2: reg 20: [io 0x2000-0x201f]
[ 0.193258] pci 0000:00:1d.3: reg 20: [io 0x2020-0x203f]
[ 0.193333] pci 0000:00:1d.7: reg 10: [mem 0xe8080000-0xe80803ff]
[ 0.193403] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.193412] pci 0000:00:1d.7: PME# disabled
[ 0.193520] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.193531] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
[ 0.193539] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO
[ 0.193569] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.193580] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.193590] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.193600] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.193610] pci 0000:00:1f.1: reg 20: [io 0x2060-0x206f]
[ 0.193620] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.193684] pci 0000:00:1f.3: reg 20: [io 0x2040-0x205f]
[ 0.193738] pci 0000:00:1f.5: reg 10: [io 0x1400-0x14ff]
[ 0.193750] pci 0000:00:1f.5: reg 14: [io 0x1c80-0x1cbf]
[ 0.193771] pci 0000:00:1f.5: reg 18: [mem 0xe8080c00-0xe8080dff]
[ 0.193783] pci 0000:00:1f.5: reg 1c: [mem 0xe8080800-0xe80808ff]
[ 0.193829] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.193844] pci 0000:00:1f.5: PME# disabled
[ 0.193885] pci 0000:00:1f.6: reg 10: [io 0x1800-0x18ff]
[ 0.193895] pci 0000:00:1f.6: reg 14: [io 0x1c00-0x1c7f]
[ 0.193943] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.193949] pci 0000:00:1f.6: PME# disabled
[ 0.194016] pci 0000:03:06.0: reg 10: [io 0x3000-0x30ff]
[ 0.194026] pci 0000:03:06.0: reg 14: [mem 0xe8100000-0xe81000ff]
[ 0.194075] pci 0000:03:06.0: supports D1 D2
[ 0.194080] pci 0000:03:06.0: PME# supported from D1 D2 D3hot D3cold
[ 0.194087] pci 0000:03:06.0: PME# disabled
[ 0.194125] pci 0000:03:07.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.194150] pci 0000:03:07.0: supports D1 D2
[ 0.194154] pci 0000:03:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.194161] pci 0000:03:07.0: PME# disabled
[ 0.194199] pci 0000:03:07.1: reg 10: [mem 0x00000000-0x00000fff]
[ 0.194224] pci 0000:03:07.1: supports D1 D2
[ 0.194228] pci 0000:03:07.1: PME# supported from D0 D1 D2 D3hot
[ 0.194235] pci 0000:03:07.1: PME# disabled
[ 0.194289] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.194297] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.194305] pci 0000:00:1e.0: bridge window [mem 0xe8100000-0xe81fffff]
[ 0.194313] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.194319] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.194325] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.194411] pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:03 [bus 03-03]
[ 0.194453] pci_bus 0000:08: [bus 08-0b] partially hidden behind transparent bridge 0000:03 [bus 03-03]
[ 0.194467] pci_bus 0000:00: on NUMA node 0
[ 0.194478] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.194702] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.207429] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[ 0.207599] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.207755] ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
[ 0.207900] ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[ 0.208084] ACPI: PCI Interrupt Link [LNKE] (IRQs 5) *0, disabled.
[ 0.208286] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
[ 0.208476] ACPI: PCI Interrupt Link [LNKG] (IRQs 5) *0, disabled.
[ 0.208638] ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
[ 0.208728] HEST: Table is not found!
[ 0.208891] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.208922] vgaarb: loaded
[ 0.209291] SCSI subsystem initialized
[ 0.209459] libata version 3.00 loaded.
[ 0.209588] usbcore: registered new interface driver usbfs
[ 0.209619] usbcore: registered new interface driver hub
[ 0.209707] usbcore: registered new device driver usb
[ 0.210019] ACPI: WMI: Mapper loaded
[ 0.210024] PCI: Using ACPI for IRQ routing
[ 0.210104] PCI: pci_cache_line_size set to 64 bytes
[ 0.210235] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.210243] reserve RAM buffer: 000000002df70000 - 000000002fffffff
[ 0.210499] NetLabel: Initializing
[ 0.210504] NetLabel: domain hash size = 128
[ 0.210507] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.210531] NetLabel: unlabeled traffic allowed by default
[ 0.210701] hpet clockevent registered
[ 0.210707] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.210715] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.210726] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.220092] Switching to clocksource tsc
[ 0.243517] AppArmor: AppArmor Filesystem Enabled
[ 0.243556] pnp: PnP ACPI init
[ 0.243630] ACPI: bus type pnp registered
[ 0.251631] pnp: PnP ACPI: found 12 devices
[ 0.251638] ACPI: ACPI bus type pnp unregistered
[ 0.251647] PnPBIOS: Disabled by ACPI PNP
[ 0.251683] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.251691] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.251699] system 00:01: [io 0x0200-0x0207] has been reserved
[ 0.251705] system 00:01: [io 0x0330-0x0331] has been reserved
[ 0.251710] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.251717] system 00:01: [io 0xfe00] has been reserved
[ 0.251729] system 00:01: [mem 0xfecf0000-0xfecfffff] could not be reserved
[ 0.251735] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.289755] pci 0000:00:1e.0: BAR 15: assigned [mem 0x30000000-0x37ffffff pref]
[ 0.289764] pci 0000:00:1f.1: BAR 5: assigned [mem 0x38000000-0x380003ff]
[ 0.289774] pci 0000:00:1f.1: BAR 5: set to [mem 0x38000000-0x380003ff] (PCI address [0x38000000-0x380003ff]
[ 0.289783] pci 0000:03:07.0: BAR 15: assigned [mem 0x30000000-0x33ffffff pref]
[ 0.289790] pci 0000:03:07.0: BAR 16: assigned [mem 0x3c000000-0x3fffffff]
[ 0.289796] pci 0000:03:07.1: BAR 15: assigned [mem 0x34000000-0x37ffffff pref]
[ 0.289803] pci 0000:03:07.1: BAR 16: assigned [mem 0x40000000-0x43ffffff]
[ 0.289813] pci 0000:03:07.0: BAR 0: assigned [mem 0xe8101000-0xe8101fff]
[ 0.289830] pci 0000:03:07.0: BAR 0: set to [mem 0xe8101000-0xe8101fff] (PCI address [0xe8101000-0xe8101fff]
[ 0.289847] pci 0000:03:07.1: BAR 0: assigned [mem 0xe8102000-0xe8102fff]
[ 0.289857] pci 0000:03:07.1: BAR 0: set to [mem 0xe8102000-0xe8102fff] (PCI address [0xe8102000-0xe8102fff]
[ 0.289864] pci 0000:03:07.0: BAR 13: assigned [io 0x3400-0x34ff]
[ 0.289869] pci 0000:03:07.0: BAR 14: assigned [io 0x3800-0x38ff]
[ 0.289875] pci 0000:03:07.1: BAR 13: assigned [io 0x3c00-0x3cff]
[ 0.289883] pci 0000:03:07.1: BAR 14: assigned [io 0x2400-0x24ff]
[ 0.289889] pci 0000:03:07.0: CardBus bridge to [bus 04-07]
[ 0.289894] pci 0000:03:07.0: bridge window [io 0x3400-0x34ff]
[ 0.289901] pci 0000:03:07.0: bridge window [io 0x3800-0x38ff]
[ 0.289909] pci 0000:03:07.0: bridge window [mem 0x30000000-0x33ffffff pref]
[ 0.289916] pci 0000:03:07.0: bridge window [mem 0x3c000000-0x3fffffff]
[ 0.289924] pci 0000:03:07.1: CardBus bridge to [bus 08-0b]
[ 0.289928] pci 0000:03:07.1: bridge window [io 0x3c00-0x3cff]
[ 0.289935] pci 0000:03:07.1: bridge window [io 0x2400-0x24ff]
[ 0.289943] pci 0000:03:07.1: bridge window [mem 0x34000000-0x37ffffff pref]
[ 0.289951] pci 0000:03:07.1: bridge window [mem 0x40000000-0x43ffffff]
[ 0.289959] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.289965] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.289974] pci 0000:00:1e.0: bridge window [mem 0xe8100000-0xe81fffff]
[ 0.289982] pci 0000:00:1e.0: bridge window [mem 0x30000000-0x37ffffff pref]
[ 0.290007] pci 0000:00:1e.0: setting latency timer to 64
[ 0.290021] pci 0000:03:07.0: enabling device (0000 -> 0003)
[ 0.290036] alloc irq_desc for 16 on node -1
[ 0.290041] alloc kstat_irqs on node -1
[ 0.290054] pci 0000:03:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.290063] pci 0000:03:07.0: setting latency timer to 64
[ 0.290075] pci 0000:03:07.1: enabling device (0000 -> 0003)
[ 0.290081] alloc irq_desc for 17 on node -1
[ 0.290085] alloc kstat_irqs on node -1
[ 0.290093] pci 0000:03:07.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.290101] pci 0000:03:07.1: setting latency timer to 64
[ 0.290109] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.290114] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.290119] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.290124] pci_bus 0000:03: resource 1 [mem 0xe8100000-0xe81fffff]
[ 0.290130] pci_bus 0000:03: resource 2 [mem 0x30000000-0x37ffffff pref]
[ 0.290135] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 0.290139] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff]
[ 0.290145] pci_bus 0000:04: resource 0 [io 0x3400-0x34ff]
[ 0.290149] pci_bus 0000:04: resource 1 [io 0x3800-0x38ff]
[ 0.290154] pci_bus 0000:04: resource 2 [mem 0x30000000-0x33ffffff pref]
[ 0.290160] pci_bus 0000:04: resource 3 [mem 0x3c000000-0x3fffffff]
[ 0.290166] pci_bus 0000:08: resource 0 [io 0x3c00-0x3cff]
[ 0.290171] pci_bus 0000:08: resource 1 [io 0x2400-0x24ff]
[ 0.290176] pci_bus 0000:08: resource 2 [mem 0x34000000-0x37ffffff pref]
[ 0.290181] pci_bus 0000:08: resource 3 [mem 0x40000000-0x43ffffff]
[ 0.290273] NET: Registered protocol family 2
[ 0.290446] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.291086] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.292710] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.293585] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.293595] TCP reno registered
[ 0.293606] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.293633] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.293877] NET: Registered protocol family 1
[ 0.293945] pci 0000:00:02.0: Boot video device
[ 0.294134] PCI: CLS 1020 bytes, default 64
[ 0.294180] Simple Boot Flag at 0x40 set to 0x1
[ 0.294405] cpufreq-nforce2: No nForce2 chipset.
[ 0.294480] Scanning for low memory corruption every 60 seconds
[ 0.294782] audit: initializing netlink socket (disabled)
[ 0.294806] type=2000 audit(1301148471.288:1): initialized
[ 0.306895] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.310212] VFS: Disk quotas dquot_6.5.2
[ 0.310388] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.311799] fuse init (API version 7.14)
[ 0.312034] msgmni has been set to 1411
[ 0.540013] Freeing initrd memory: 10516k freed
[ 0.560942] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.560948] io scheduler noop registered
[ 0.560952] io scheduler deadline registered
[ 0.560971] io scheduler cfq registered (default)
[ 0.561162] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.561193] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.561488] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0
[ 0.561498] ACPI: Power Button [PWRB]
[ 0.561566] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.561571] ACPI: Power Button [PWRF]
[ 0.561814] ACPI: acpi_idle registered with cpuidle
[ 0.561862] Marking TSC unstable due to TSC halts in idle
[ 0.562067] Switching to clocksource hpet
[ 0.564656] ERST: Table is not found!
[ 0.564698] isapnp: Scanning for PnP cards...
[ 0.564934] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.565054] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.565581] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.565724] serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.565733] serial 0000:00:1f.6: PCI INT B disabled
[ 0.567821] brd: module loaded
[ 0.568825] loop: module loaded
[ 0.569246] ata_piix 0000:00:1f.1: version 2.13
[ 0.569265] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 0.569279] alloc irq_desc for 18 on node -1
[ 0.569283] alloc kstat_irqs on node -1
[ 0.569296] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.569373] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.569513] scsi0 : ata_piix
[ 0.569677] scsi1 : ata_piix
[ 0.571319] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2060 irq 14
[ 0.571324] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2068 irq 15
[ 0.571946] Fixed MDIO Bus: probed
[ 0.572015] PPP generic driver version 2.4.2
[ 0.572118] tun: Universal TUN/TAP device driver, 1.6
[ 0.572122] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 0.572285] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.572324] alloc irq_desc for 23 on node -1
[ 0.572328] alloc kstat_irqs on node -1
[ 0.572340] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.572367] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.572373] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.572439] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.572480] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.576362] ehci_hcd 0000:00:1d.7: cache line size of 1020 is not supported
[ 0.576392] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe8080000
[ 0.593018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.593254] hub 1-0:1.0: USB hub found
[ 0.593262] hub 1-0:1.0: 8 ports detected
[ 0.593413] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.593443] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.593508] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.593520] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.593525] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.593610] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.593659] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001cc0
[ 0.593866] hub 2-0:1.0: USB hub found
[ 0.593876] hub 2-0:1.0: 2 ports detected
[ 0.593979] alloc irq_desc for 19 on node -1
[ 0.593983] alloc kstat_irqs on node -1
[ 0.593993] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.594004] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.594009] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.594069] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.594108] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001ce0
[ 0.594326] hub 3-0:1.0: USB hub found
[ 0.594334] hub 3-0:1.0: 2 ports detected
[ 0.594433] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.594442] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.594447] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.594507] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.594544] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002000
[ 0.594750] hub 4-0:1.0: USB hub found
[ 0.594758] hub 4-0:1.0: 2 ports detected
[ 0.594862] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.594872] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.594877] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.594933] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.594960] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
[ 0.595182] hub 5-0:1.0: USB hub found
[ 0.595189] hub 5-0:1.0: 2 ports detected
[ 0.595387] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.597612] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.597624] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.597818] mice: PS/2 mouse device common for all mice
[ 0.598019] rtc_cmos 00:04: RTC can wake from S4
[ 0.598092] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.598120] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.598322] device-mapper: uevent: version 1.0.3
[ 0.598533] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@xxxxxxxxxx
[ 0.598647] device-mapper: multipath: version 1.1.1 loaded
[ 0.598655] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.598865] EISA: Probing bus 0 at eisa.0
[ 0.598875] Cannot allocate resource for EISA slot 1
[ 0.598880] Cannot allocate resource for EISA slot 2
[ 0.598884] Cannot allocate resource for EISA slot 3
[ 0.598913] EISA: Detected 0 cards.
[ 0.599106] cpuidle: using governor ladder
[ 0.599211] cpuidle: using governor menu
[ 0.599816] TCP cubic registered
[ 0.600054] NET: Registered protocol family 10
[ 0.600753] lo: Disabled Privacy Extensions
[ 0.601281] NET: Registered protocol family 17
[ 0.601368] Using IPI No-Shortcut mode
[ 0.601545] PM: Resume from disk failed.
[ 0.601569] registered taskstats version 1
[ 0.601836] Magic number: 3:484:132
[ 0.601922] acpi device:07: hash matches
[ 0.601963] rtc_cmos 00:04: setting system clock to 2011-03-26 14:07:52 UTC (1301148472)
[ 0.601969] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.601972] EDD information not available.
[ 0.616751] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.745540] ata2.00: ATAPI: CD-224E, 1.9A, max UDMA/33
[ 0.745788] ata1.00: ATA-7: SAMSUNG SP0802N, TK200-04, max UDMA/100
[ 0.745793] ata1.00: 156368016 sectors, multi 16: LBA48
[ 0.761319] ata2.00: configured for UDMA/33
[ 0.761526] ata1.00: configured for UDMA/100
[ 0.918585] isapnp: No Plug & Play device found
[ 0.918782] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP0802N TK20 PQ: 0 ANSI: 5
[ 0.918998] sd 0:0:0:0: [sda] 156368016 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 0.919075] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.919113] sd 0:0:0:0: [sda] Write Protect is off
[ 0.919120] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.919172] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.919580] sda:
[ 0.920844] scsi 1:0:0:0: CD-ROM TEAC CD-224E 1.9A PQ: 0 ANSI: 5
[ 0.925932] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 0.925937] Uniform CD-ROM driver Revision: 3.20
[ 0.926094] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.926184] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 0.927363] sda1 sda2 < sda5 >
[ 0.948886] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.948923] Freeing unused kernel memory: 688k freed
[ 0.949980] Write protecting the kernel text: 4936k
[ 0.950056] Write protecting the kernel read-only data: 1980k
[ 0.982170] udev[79]: starting version 163
[ 1.100102] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 1.192035] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.192079] 8139cp 0000:03:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.258175] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.258262] 8139too 0000:03:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.259899] 8139too 0000:03:06.0: eth0: RealTek RTL8139 at 0x3000, 00:90:f5:16:bd:2d, IRQ 18
[ 1.295126] Floppy drive(s): fd0 is 1.44M
[ 1.313053] FDC 0 is a post-1991 82077
[ 1.347689] usbcore: registered new interface driver hiddev
[ 1.361192] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input3
[ 1.361660] generic-usb 0003:046D:C01A.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 1.361707] usbcore: registered new interface driver usbhid
[ 1.361710] usbhid: USB HID core driver
[ 1.448380] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 1.448389] EXT4-fs (sda1): write access will be enabled during recovery
[ 4.215995] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 4.216019] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4205377
[ 4.216150] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4205376
[ 4.216226] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4593945
[ 4.216281] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4593941
[ 4.216309] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4594245
[ 4.237110] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4203785
[ 4.237174] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4201194
[ 4.237235] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4594242
[ 4.237263] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4594241
[ 4.245205] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4594240
[ 4.245238] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4594239
[ 4.245265] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4594238
[ 4.245293] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4201197
[ 4.245321] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4594237
[ 4.245348] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4594236
[ 4.245375] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4594235
[ 4.245402] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4594234
[ 4.245429] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4594233
[ 4.245455] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4594232
[ 4.245482] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4594230
[ 4.245509] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4594228
[ 4.245536] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4594227
[ 4.245564] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4593951
[ 4.245591] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4593950
[ 4.245618] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4593949
[ 4.245645] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4593948
[ 4.245672] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4593947
[ 4.245698] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4593944
[ 4.245725] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4593940
[ 4.245752] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4593942
[ 4.245779] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4593939
[ 4.245806] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4593937
[ 4.245835] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4592766
[ 4.264105] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4592162
[ 4.321018] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4592860
[ 4.356595] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4201612
[ 4.378991] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4594243
[ 4.379022] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4201676
[ 4.402175] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4201173
[ 4.402213] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3538954
[ 4.402234] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3538953
[ 4.402249] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3538952
[ 4.402265] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3538951
[ 4.402280] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3538950
[ 4.402294] EXT4-fs (sda1): 44 orphan inodes deleted
[ 4.402299] EXT4-fs (sda1): recovery complete
[ 4.649489] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 18.765049] udev[303]: starting version 163
[ 18.870903] Adding 2301948k swap on /dev/sda5. Priority:-1 extents:1 across:2301948k
[ 18.900001] lp: driver loaded but no devices found
[ 19.021745] Linux agpgart interface v0.103
[ 19.028286] intel_rng: FWH not detected
[ 19.059976] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 19.060507] agpgart-intel 0000:00:00.0: detected 32636K stolen memory
[ 19.062531] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 19.094165] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.348384] parport_pc 00:0b: reported by Plug and Play ACPI
[ 19.348501] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 19.357713] yenta_cardbus 0000:03:07.0: CardBus bridge found [1558:0295]
[ 19.357740] yenta_cardbus 0000:03:07.0: Enabling burst memory read transactions
[ 19.357748] yenta_cardbus 0000:03:07.0: Using CSCINT to route CSC interrupts to PCI
[ 19.357752] yenta_cardbus 0000:03:07.0: Routing CardBus interrupts to PCI
[ 19.357760] yenta_cardbus 0000:03:07.0: TI: mfunc 0x00921c22, devctl 0x64
[ 19.410385] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 19.444454] lp0: using parport0 (interrupt-driven).
[ 19.528688] [drm] Initialized drm 1.1.0 20060810
[ 19.588672] yenta_cardbus 0000:03:07.0: ISA IRQ mask 0x0c38, PCI irq 16
[ 19.588681] yenta_cardbus 0000:03:07.0: Socket status: 30000006
[ 19.588690] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #03 to #07
[ 19.588712] yenta_cardbus 0000:03:07.0: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff]
[ 19.588719] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: excluding 0x3000-0x30ff 0x33c0-0x33df 0x3400-0x34ff 0x37c0-0x37df 0x3800-0x38ff 0x3bc0-0x3bdf 0x3c00-0x3cff 0x3fc0-0x3fdf
[ 19.594490] yenta_cardbus 0000:03:07.0: pcmcia: parent PCI bridge window: [mem 0xe8100000-0xe81fffff]
[ 19.594500] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8100000-0xe81fffff: excluding 0xe8100000-0xe810ffff
[ 19.594530] yenta_cardbus 0000:03:07.0: pcmcia: parent PCI bridge window: [mem 0x30000000-0x37ffffff pref]
[ 19.594536] pcmcia_socket pcmcia_socket0: cs: memory probe 0x30000000-0x37ffffff: excluding 0x30000000-0x37ffffff
[ 19.648119] ppdev: user-space parallel port driver
[ 19.652851] yenta_cardbus 0000:03:07.1: CardBus bridge found [1558:0295]
[ 19.652886] yenta_cardbus 0000:03:07.1: Using CSCINT to route CSC interrupts to PCI
[ 19.652893] yenta_cardbus 0000:03:07.1: Routing CardBus interrupts to PCI
[ 19.652903] yenta_cardbus 0000:03:07.1: TI: mfunc 0x00921c22, devctl 0x64
[ 19.659588] type=1400 audit(1301148491.552:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=538 comm="apparmor_parser"
[ 19.660372] type=1400 audit(1301148491.556:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=538 comm="apparmor_parser"
[ 19.660776] type=1400 audit(1301148491.556:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=538 comm="apparmor_parser"
[ 19.816748] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 19.816766] i915 0000:00:02.0: setting latency timer to 64
[ 19.883960] [drm] set up 31M of stolen space
[ 19.884724] yenta_cardbus 0000:03:07.1: ISA IRQ mask 0x0c38, PCI irq 17
[ 19.884732] yenta_cardbus 0000:03:07.1: Socket status: 30000006
[ 19.884739] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #07 to #0b
[ 19.884756] yenta_cardbus 0000:03:07.1: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff]
[ 19.884762] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3000-0x3fff: excluding 0x3000-0x30ff 0x33c0-0x33df 0x3400-0x34ff 0x37c0-0x37df 0x3800-0x38ff 0x3bc0-0x3bdf 0x3c00-0x3cff 0x3fc0-0x3fdf
[ 19.890227] yenta_cardbus 0000:03:07.1: pcmcia: parent PCI bridge window: [mem 0xe8100000-0xe81fffff]
[ 19.890234] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe8100000-0xe81fffff: excluding 0xe8100000-0xe810ffff
[ 19.890259] yenta_cardbus 0000:03:07.1: pcmcia: parent PCI bridge window: [mem 0x30000000-0x37ffffff pref]
[ 19.890264] pcmcia_socket pcmcia_socket1: cs: memory probe 0x30000000-0x37ffffff: excluding 0x30000000-0x37ffffff
[ 19.955423] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 19.955880] [drm] initialized overlay support
[ 19.987271] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x207 0x330-0x337 0x370-0x37f
[ 19.989138] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7
[ 19.989955] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 19.990654] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 19.997742] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff 0xd8000-0xfffff
[ 19.997916] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 19.998091] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 19.998293] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 20.008194] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x207 0x330-0x337 0x370-0x37f
[ 20.010140] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7
[ 20.011033] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 20.011779] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 20.012597] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff 0xd8000-0xfffff
[ 20.012723] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 20.012847] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 20.012982] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 20.205091] type=1400 audit(1301148492.100:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=741 comm="apparmor_parser"
[ 20.205853] type=1400 audit(1301148492.100:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=741 comm="apparmor_parser"
[ 20.206298] type=1400 audit(1301148492.100:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=741 comm="apparmor_parser"
[ 20.217824] type=1400 audit(1301148492.112:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=740 comm="apparmor_parser"
[ 20.256730] type=1400 audit(1301148492.152:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=754 comm="apparmor_parser"
[ 20.286658] type=1400 audit(1301148492.180:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=747 comm="apparmor_parser"
[ 20.297086] type=1400 audit(1301148492.192:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=754 comm="apparmor_parser"
[ 20.335462] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 20.555174] Console: switching to colour frame buffer device 128x48
[ 20.562175] fb0: inteldrmfb frame buffer device
[ 20.562181] drm: registered panic notifier
[ 20.563176] Slow work thread pool: Starting up
[ 20.563342] Slow work thread pool: Ready
[ 20.563369] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 20.565972] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 20.566040] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 21.401109] intel8x0_measure_ac97_clock: measured 55031 usecs (2652 samples)
[ 21.401119] intel8x0: clocking to 48000
[ 28.070213] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 31.140062] eth0: no IPv6 routers present
[173617.520049] usb 3-2: new full speed USB device using uhci_hcd and address 2
[173618.197201] WARNING! power/level is deprecated; use power/control instead
[173619.483044] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0841
[173619.483100] usbcore: registered new interface driver usblp
[173620.948151] usb 3-2: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[173726.897084] usb 3-2: USB disconnect, address 2
[173726.897468] usblp0: removed
[173728.625046] usb 3-2: new full speed USB device using uhci_hcd and address 3
[173728.803313] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0841
[173729.956633] usb 3-2: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[176553.408575] usb 3-2: usbfs: interface 1 claimed by usblp while 'simple-scan' sets config #1
[176607.071001] usb 3-2: usbfs: interface 1 claimed by usblp while 'simple-scan' sets config #1
[177020.766090] show_signal_msg: 21 callbacks suppressed
[177020.766098] gs[6703]: segfault at 8 ip 00118c67 sp bfc36530 error 4 in libtiff.so.4.3.3[114000+57000]
[177149.976337] gs[6715]: segfault at 8 ip 00271c67 sp bfff3980 error 4 in libtiff.so.4.3.3[26d000+57000]
[177389.918545] render error detected, EIR: 0x00000010
[177389.918555] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[177389.918578] render error detected, EIR: 0x00000010
[178650.236041] gs[6985]: segfault at 8 ip 00174c67 sp bf958760 error 4 in libtiff.so.4.3.3[170000+57000]
Module Size Used by
usblp 10651 0
binfmt_misc 6599 1
snd_intel8x0 25664 2
snd_ac97_codec 99227 1 snd_intel8x0
ac97_bus 1014 1 snd_ac97_codec
snd_pcm 71475 2 snd_intel8x0,snd_ac97_codec
snd_seq_midi 4588 0
i915 295435 4
snd_rawmidi 17783 1 snd_seq_midi
snd_seq_midi_event 6047 1 snd_seq_midi
pcmcia 35973 0
snd_seq 47174 2 snd_seq_midi,snd_seq_midi_event
ppdev 5556 0
drm_kms_helper 30200 1 i915
snd_timer 19067 2 snd_pcm,snd_seq
snd_seq_device 5744 3 snd_seq_midi,snd_rawmidi,snd_seq
drm 168060 4 i915,drm_kms_helper
yenta_socket 21518 0
pcmcia_rsrc 10566 1 yenta_socket
parport_pc 26058 1
snd 49038 11 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
pcmcia_core 14657 3 pcmcia,yenta_socket,pcmcia_rsrc
psmouse 59033 0
shpchp 29886 0
intel_agp 26566 2 i915
i2c_algo_bit 5168 1 i915
soundcore 880 1 snd
serio_raw 4022 0
video 18712 1 i915
snd_page_alloc 7120 2 snd_intel8x0,snd_pcm
agpgart 32011 2 drm,intel_agp
output 1883 1 video
lp 7342 0
parport 31492 3 ppdev,parport_pc,lp
usbhid 36882 0
hid 67742 1 usbhid
floppy 54311 0
8139too 19581 0
8139cp 16934 0
mii 4425 2 8139too,8139cp
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.35-28-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.23
Linux version 2.6.35-28-generic (buildd@roseapple) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #49-Ubuntu SMP Tue Mar 1 14:40:58 UTC 2011
scanModem update of: 2011_02_04
Distrib_ID=Ubuntu
DistribCodeName=maverick
AptRepositoryStem=http://it.archive.ubuntu.com/ubuntu/
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
Attached USB devices are:
ID 046d:c01a Logitech, Inc. M-BQ85 Optical Wheel Mouse
ID 04b8:0841 Seiko Epson Corp.
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
00:1f.6 Modem: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Modem Controller (rev 02)
High Definition Audio cards can host modem chips.
For candidate card in slot 00:1f.6, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1f.6 8086:24d6 0986:002d Modem: Intel Corporation 82801EB/ER
Modem interrupt assignment and sharing:
17: 52761 2534 IO-APIC-fasteoi yenta, Intel ICH5
--- Bootup diagnostics for card in PCI slot 00:1f.6 ----
[ 0.193885] pci 0000:00:1f.6: reg 10: [io 0x1800-0x18ff]
[ 0.193895] pci 0000:00:1f.6: reg 14: [io 0x1c00-0x1c7f]
[ 0.193943] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.193949] pci 0000:00:1f.6: PME# disabled
[ 0.565724] serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.565733] serial 0000:00:1f.6: PCI INT B disabled
The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
