Dear All,
I'm running Ubuntu lucid 32-bit, and as per scanModem, I have an
AgereSystems/LSI modem hosted on audio card.
I' ve downloaded and installed the required package for agrsm driver
"agrsm-11c11040_20091225_i386.deb", and installed
"agrsm-tools_0.0.1_all.deb" as well.
The problem is for unkown reason "for me", my system still cannot
detect the driver, and by running the command agrsm-test in the
terminal, it gave me the following:
---------------------------------------------
hatem@HNH-PC:/$ sudo agrsm-test
Found drivers for boot kernel 2.6.32-21-generic at:
/lib/modules/2.6.32-21-generic/extra/agrmodem.ko
/lib/modules/2.6.32-21-generic/extra/agrserial.ko
FATAL: Module agrserial not found.
FATAL: Module agrmodem not found.
Loading drivers:
FATAL: Module agrmodem not found.
FATAL: Module agrserial not found.
ln: creating symbolic link `/dev/ttySAGR': File exists
FATAL: Error running install command for agrserial
Drivers loaded:
and symbolic link created:
lrwxrwxrwx 1 root root 12 2010-11-27 12:11 /dev/ttySAGR -> /dev/ttyAGS3
Checking for utility wvdialconf
Found /usr/bin/wvdialconf, preparing to run:
wvdialconf /etc/wvdial.conf
Modem Port Scan<*1>: S0 S1 S2 S3 SAGR
A reboot may be necessary before modem detection through:
sudo modprobe agrserial
Which will load agrmodem, agrserial and create the symbolic link needed for:
sudo wvdialconf
The installation record has been written to ./agrsm-test.txt
---------------------------------------------
I made reboot and repeated the command but still having the same
result. I attached with this message both dmesg.txt and ModemData.txt
Your help is highly appreciated. Thanks.
--
Kind Regards,
Hatem Nady
Petroleum Geologist, Egypt.
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.32-21-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.21
Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010
scanModem update of: 2010_05_29
Distrib_ID=Ubuntu
DistribCodeName=lucid
AptRepositoryStem=http://eg.archive.ubuntu.com/ubuntu/
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 15d9:0a33 Dexon Mouse
ID 138a:0001 DigitalPersona, Inc Fingeprint Reader
ID 046d:09b8 Logitech, Inc.
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
High Definition Audio cards can host modem chips.
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:293e 103c:30f7 Audio device: Intel Corporation 82801I
Modem interrupt assignment and sharing:
34: 534 1019 PCI-MSI-edge HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.533315] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdf300000-0xdf303fff]
[ 0.533365] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.533369] pci 0000:00:1b.0: PME# disabled
[ 17.096096] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 17.096108] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 17.096180] HDA Intel 0000:00:1b.0: irq 34 for MSI/MSI-X
[ 17.096223] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 17.245551] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 17.265332] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 17.265407] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 1
00-03: NVIDIA HDMI : NVIDIA HDMI : playback 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xdf300000 irq 34
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.32-21-generic/kernel/sound/pci/hda/snd-hda-intel.ko
The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: LSI ID 1040
Address: 1
Function Id: 0x2
Vendor Id: 0x11c11040
Subsystem Id: 0x103c137e
Revision Id: 0x100200
Modem Function Group: 0x1
The audio card hosts a softmodem chip: 0x11c11040
The softmodem chip 11c11040 is hosted on the Subsytem of the High Definition Audio card,
and is supported by the AgereSystems/LSI driver pair agrmodem + agrserial, which is provided by
the most current package agrsm-11c11040-version at http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
If not a Conexant modem, the driver agrsm with its dependent drivers:
----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801I "
CLASS=0403
PCIDEV=8086:293e
SUBSYS=103c:30f7
IRQ=34
HDA2=00:1b.0
SOFT=8086:293e.HDA
HDAchipVendorID=11c1
CHIP=0x11c11040
IDENT=agrsm
Driver=agrsm
package=agrsm-11c11040
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801I
Primary device ID: 8086:293e
Subsystem PCI_id 103c:30f7
Softmodem codec or chipset from diagnostics: 0x11c11040
from Archives:
The HDA card softmodem chip is 0x11c11040
Support type needed or chipset: agrsm
Writing DOCs/Intel.txt
The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrserial driver pair.
There are a few different chipsets which use this driver pair, but they use different code resources:
Chipsets KV* PackageNames (most current as of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f 2.6.29 agrsm048pci-2.1.60_20100108_i386.deb or agrsm048pci-2.1.60_20100108.tar.gz
11c1:0620 2.6.31 agrsm06pci-2.1.80_20100106_i386.deb or agrsm06pci-2.1.80~20100106.tar.gz !!
11c11040 (on HDA audio cards) 2.6.31 agrsm-11c11040_20091225_i386.deb or agrsm-11c11040-2.1.80~20091225.tar.bz2 !!
All available at: http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Additionally there are;
automation & testing agrsm-tools_0.0.1_all.deb or agrsm-tools-0.0.1-2.noarch.rpm
General background agrsm_howto.txt
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success
!! Latest update with major credit to Nikolay Zhuravlev
But see conflict issue: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html
For the 11c11040 chip with kernels 2.6.31 and later a change in a modules loading settingmay be necessary.
Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for your Distro), change the phrase:
options snd-hda-intel power_save=10
to:
options snd-hda-intel power_save=0
or the agrsm drivers will not function. For Ubuntu related systems this can be done with:
$ sudo gedit /etc/modprobe.d/alsa-base.conf
Report from Bjorn Wielens:
Please note- trying to load the modules on a OpenSuSE 11.2 system gives
an error about the module_version symbol. Using:
# modprobe --force agrmodem
# modprobe --force agrserial
is necessary to load the drivers, and does not appear to cause ill effects.
All of the above packages are dkms competent. This means that if your Linux distros dkms package
is previously installed, if provides for future updates matching forthcoming kernels.
-------------- end Agere Systems section -------------------
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.3
and the compiler used in kernel assembly: 4.4.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.32-21-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/agrsm.conf:## setup agrsm modem with only: "sudo modprobe agrserial"
/etc/modprobe.d/agrsm.conf:install agrserial /sbin/modprobe --ignore-install agrmodem ; /sbin/modprobe --ignore-install agrserial && \
/etc/modprobe.d/agrsm.conf:remove agrserial /sbin/modprobe -r --ignore-remove agrserial ; /sbin/modprobe -r --ignore-remove agrmodem && { if test -L /dev/ttySAGR; then rm /dev/ttySAGR; fi } ; true
/etc/modprobe.d/agrsm.conf:# to automate bootup "sudo modprobe agrmodem"
/etc/modprobe.d/agrsm.conf:## to setup agrsm modem with only: "sudo modprobe agrmodem"
/etc/modprobe.d/agrsm.conf:# install agrmodem /sbin/modprobe --ignore-install agrmodem && \
/etc/modprobe.d/agrsm.conf:## of effects of agrmodem and agrserial loading
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
CPU0 CPU1
0: 23575 32860 IO-APIC-edge timer
1: 13 135 IO-APIC-edge i8042
4: 0 0 IO-APIC-edge enecir
8: 1 0 IO-APIC-edge rtc0
9: 45 46 IO-APIC-fasteoi acpi
12: 50 58 IO-APIC-edge i8042
16: 12 11 IO-APIC-fasteoi uhci_hcd:usb3, mmc0, jmb38x_ms:slot0, nouveau
17: 0 0 IO-APIC-fasteoi uhci_hcd:usb4
18: 1 1 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb7
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb8
20: 12631 265 IO-APIC-fasteoi ehci_hcd:usb2, uhci_hcd:usb5
22: 0 0 IO-APIC-fasteoi uhci_hcd:usb6
31: 0 0 PCI-MSI-edge eth0
32: 8066 1777 PCI-MSI-edge ahci
33: 0 0 PCI-MSI-edge iwlagn
34: 534 1019 PCI-MSI-edge HDA Intel
NMI: 0 0 Non-maskable interrupts
LOC: 23010 9402 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
PND: 0 0 Performance pending work
RES: 1061 1790 Rescheduling interrupts
CAL: 43 77 Function call interrupts
TLB: 219 297 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 2 2 Machine check polls
ERR: 1
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfc6c000 (usable)
[ 0.000000] BIOS-e820: 00000000bfc6c000 - 00000000bfcbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfcbf000 - 00000000bfd83000 (usable)
[ 0.000000] BIOS-e820: 00000000bfd83000 - 00000000bfdbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfdbf000 - 00000000bfde8000 (usable)
[ 0.000000] BIOS-e820: 00000000bfde8000 - 00000000bfdff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xbfe00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BFE00000 mask FFFE00000 uncachable
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 base 0FFF00000 mask FFFF00000 write-protect
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009e000 (usable)
[ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bfc6c000 (usable)
[ 0.000000] modified: 00000000bfc6c000 - 00000000bfcbf000 (reserved)
[ 0.000000] modified: 00000000bfcbf000 - 00000000bfd83000 (usable)
[ 0.000000] modified: 00000000bfd83000 - 00000000bfdbf000 (ACPI NVS)
[ 0.000000] modified: 00000000bfdbf000 - 00000000bfde8000 (usable)
[ 0.000000] modified: 00000000bfde8000 - 00000000bfdff000 (ACPI data)
[ 0.000000] modified: 00000000bfdff000 - 00000000bfe00000 (usable)
[ 0.000000] modified: 00000000bfe00000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 37857000 - 37fefd46
[ 0.000000] Allocated new RAMDISK: 008de000 - 01076d46
[ 0.000000] Move RAMDISK from 0000000037857000 - 0000000037fefd45 to 008de000 - 01076d45
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP )
[ 0.000000] ACPI: XSDT bfdfe120 0006C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP bfdfc000 000F4 (v04 HP BLADE 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT bfded000 0A6DD (v01 HP BLADE 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS bfd8c000 00040
[ 0.000000] ACPI: SSDT bfdfd000 00655 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: HPET bfdfb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC bfdfa000 0006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG bfdf9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASF! bfdf8000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC bfdec000 00176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 000F4240)
[ 0.000000] ACPI: BOOT bfdeb000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT bfdea000 00296 (v01 INTEL SataAhci 00001000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2182MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
[ 0.000000] #5 [00008da000 - 00008dd15c] BRK ==> [00008da000 - 00008dd15c]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008de000 - 0001076d46] NEW RAMDISK ==> [00008de000 - 0001076d46]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bfe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bfc6c
[ 0.000000] 0: 0x000bfcbf -> 0x000bfd83
[ 0.000000] 0: 0x000bfdbf -> 0x000bfde8
[ 0.000000] 0: 0x000bfdff -> 0x000bfe00
[ 0.000000] On node 0 totalpages: 785652
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1078000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3962 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4365 pages used for memmap
[ 0.000000] HighMem zone: 554063 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36024 r0 d21320 u1048576
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779511
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=fd44eeb0-0486-4812-a8c6-bea204367e37 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 15718400 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bfe00)
[ 0.000000] Memory: 3084520k/3143680k available (4673k kernel code, 56880k reserved, 2122k data, 656k init, 2233712k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2527.527 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.05 BogoMIPS (lpj=10110108)
[ 0.004036] Security Framework initialized
[ 0.004069] AppArmor: AppArmor initialized
[ 0.004093] Mount-cache hash table entries: 512
[ 0.004319] Initializing cgroup subsys ns
[ 0.004323] Initializing cgroup subsys cpuacct
[ 0.004326] Initializing cgroup subsys memory
[ 0.004349] Initializing cgroup subsys devices
[ 0.004351] Initializing cgroup subsys freezer
[ 0.004353] Initializing cgroup subsys net_cls
[ 0.004388] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004390] CPU: L2 cache: 6144K
[ 0.004409] CPU: Physical Processor ID: 0
[ 0.004410] CPU: Processor Core ID: 0
[ 0.004414] mce: CPU supports 6 MCE banks
[ 0.004421] CPU0: Thermal monitoring enabled (TM1)
[ 0.004442] using mwait in idle threads.
[ 0.004447] Performance Events: Core2 events, Intel PMU driver.
[ 0.004454] ... version: 2
[ 0.004473] ... bit width: 40
[ 0.004474] ... generic registers: 2
[ 0.004476] ... value mask: 000000ffffffffff
[ 0.004477] ... max period: 000000007fffffff
[ 0.004479] ... fixed-purpose events: 3
[ 0.004480] ... event mask: 0000000700000003
[ 0.004483] Checking 'hlt' instruction... OK.
[ 0.025172] ACPI: Core revision 20090903
[ 0.060008] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.060012] ftrace: allocating 21771 entries in 43 pages
[ 0.064037] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.068297] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.107989] CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
[ 0.108001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 6144K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM1)
[ 0.192079] CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
[ 0.192089] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.196016] Brought up 2 CPUs
[ 0.196018] Total of 2 processors activated (10109.63 BogoMIPS).
[ 0.196885] CPU0 attaching sched-domain:
[ 0.196888] domain 0: span 0-1 level MC
[ 0.196890] groups: 0 1
[ 0.196895] CPU1 attaching sched-domain:
[ 0.196897] domain 0: span 0-1 level MC
[ 0.196898] groups: 1 0
[ 0.196984] devtmpfs: initialized
[ 0.196984] regulator: core version 0.5
[ 0.196984] Time: 9:49:21 Date: 11/27/10
[ 0.196984] NET: Registered protocol family 16
[ 0.196984] Trying to unpack rootfs image as initramfs...
[ 0.196984] EISA bus registered
[ 0.196984] ACPI: bus type pci registered
[ 0.196984] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.196984] PCI: MCFG area at f8000000 reserved in E820
[ 0.196984] PCI: Using MMCONFIG for extended config space
[ 0.196984] PCI: Using configuration type 1 for base access
[ 0.200078] bio: create slab <bio-0> at 0
[ 0.201246] ACPI: EC: Look up EC in DSDT
[ 0.249995] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.251217] ACPI: BIOS _OSI(Linux) query ignored
[ 0.273871] ACPI: Interpreter enabled
[ 0.273871] ACPI: (supports S0 S3 S4 S5)
[ 0.273871] ACPI: Using IOAPIC for interrupt routing
[ 0.353961] Freeing initrd memory: 7779k freed
[ 0.500191] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 0.500770] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 0.512026] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.514015] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.532039] ACPI: Power Resource [FN00] (on)
[ 0.532338] ACPI: No dock devices found.
[ 0.532770] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.532870] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.532873] pci 0000:00:01.0: PME# disabled
[ 0.532973] pci 0000:00:1a.0: reg 20 io port: [0x90e0-0x90ff]
[ 0.533084] pci 0000:00:1a.1: reg 20 io port: [0x90c0-0x90df]
[ 0.533189] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdf304c00-0xdf304fff]
[ 0.533262] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.533267] pci 0000:00:1a.7: PME# disabled
[ 0.533315] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdf300000-0xdf303fff]
[ 0.533365] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.533369] pci 0000:00:1b.0: PME# disabled
[ 0.533444] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.533449] pci 0000:00:1c.0: PME# disabled
[ 0.533528] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.533532] pci 0000:00:1c.1: PME# disabled
[ 0.533613] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.533617] pci 0000:00:1c.2: PME# disabled
[ 0.533696] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.533700] pci 0000:00:1c.3: PME# disabled
[ 0.533779] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.533783] pci 0000:00:1c.4: PME# disabled
[ 0.533860] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.533863] pci 0000:00:1c.5: PME# disabled
[ 0.533945] pci 0000:00:1d.0: reg 20 io port: [0x90a0-0x90bf]
[ 0.534048] pci 0000:00:1d.1: reg 20 io port: [0x9080-0x909f]
[ 0.534155] pci 0000:00:1d.2: reg 20 io port: [0x9060-0x907f]
[ 0.534265] pci 0000:00:1d.3: reg 20 io port: [0x9040-0x905f]
[ 0.534369] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdf304800-0xdf304bff]
[ 0.534444] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.534449] pci 0000:00:1d.7: PME# disabled
[ 0.534671] pci 0000:00:1f.2: reg 10 io port: [0x9108-0x910f]
[ 0.534677] pci 0000:00:1f.2: reg 14 io port: [0x9114-0x9117]
[ 0.534684] pci 0000:00:1f.2: reg 18 io port: [0x9100-0x9107]
[ 0.534690] pci 0000:00:1f.2: reg 1c io port: [0x9110-0x9113]
[ 0.534697] pci 0000:00:1f.2: reg 20 io port: [0x9020-0x903f]
[ 0.534703] pci 0000:00:1f.2: reg 24 32bit mmio: [0xdf304000-0xdf3047ff]
[ 0.534741] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.534744] pci 0000:00:1f.2: PME# disabled
[ 0.534778] pci 0000:00:1f.3: reg 10 64bit mmio: [0xdf305000-0xdf3050ff]
[ 0.534794] pci 0000:00:1f.3: reg 20 io port: [0x9000-0x901f]
[ 0.534874] pci 0000:01:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff]
[ 0.534889] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.534905] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff]
[ 0.534913] pci 0000:01:00.0: reg 24 io port: [0x8000-0x807f]
[ 0.534922] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
[ 0.535026] pci 0000:00:01.0: bridge io port: [0x8000-0x8fff]
[ 0.535029] pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd2ffffff]
[ 0.535033] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.535080] pci 0000:00:1c.0: bridge io port: [0x7000-0x7fff]
[ 0.535085] pci 0000:00:1c.0: bridge 32bit mmio: [0xde300000-0xdf2fffff]
[ 0.535091] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd3000000-0xd3ffffff]
[ 0.535141] pci 0000:00:1c.1: bridge io port: [0x6000-0x6fff]
[ 0.535146] pci 0000:00:1c.1: bridge 32bit mmio: [0xdd300000-0xde2fffff]
[ 0.535152] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd4000000-0xd4ffffff]
[ 0.535269] pci 0000:04:00.0: reg 10 64bit mmio: [0xdc200000-0xdc201fff]
[ 0.535387] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.535398] pci 0000:04:00.0: PME# disabled
[ 0.535473] pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff]
[ 0.535477] pci 0000:00:1c.2: bridge 32bit mmio: [0xdc200000-0xdd2fffff]
[ 0.535483] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xd5000000-0xd5ffffff]
[ 0.535536] pci 0000:05:00.0: reg 10 io port: [0x3000-0x30ff]
[ 0.535558] pci 0000:05:00.0: reg 18 64bit mmio pref: [0xd6010000-0xd6010fff]
[ 0.535574] pci 0000:05:00.0: reg 20 64bit mmio pref: [0xd6000000-0xd600ffff]
[ 0.535584] pci 0000:05:00.0: reg 30 32bit mmio pref: [0xffff0000-0xffffffff]
[ 0.535630] pci 0000:05:00.0: supports D1 D2
[ 0.535632] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.535637] pci 0000:05:00.0: PME# disabled
[ 0.535707] pci 0000:00:1c.3: bridge io port: [0x3000-0x4fff]
[ 0.535711] pci 0000:00:1c.3: bridge 32bit mmio: [0xdb200000-0xdc1fffff]
[ 0.535718] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xd6000000-0xd70fffff]
[ 0.535773] pci 0000:06:00.0: reg 10 32bit mmio: [0xda100300-0xda1003ff]
[ 0.535934] pci 0000:06:00.2: reg 10 32bit mmio: [0xda100200-0xda1002ff]
[ 0.536097] pci 0000:06:00.3: reg 10 32bit mmio: [0xda100100-0xda1001ff]
[ 0.536254] pci 0000:06:00.4: reg 10 32bit mmio: [0xda100000-0xda1000ff]
[ 0.536414] pci 0000:00:1c.4: bridge io port: [0x2000-0x2fff]
[ 0.536419] pci 0000:00:1c.4: bridge 32bit mmio: [0xda100000-0xdb1fffff]
[ 0.536425] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xd7100000-0xd80fffff]
[ 0.536473] pci 0000:00:1c.5: bridge io port: [0x1000-0x1fff]
[ 0.536478] pci 0000:00:1c.5: bridge 32bit mmio: [0xd9100000-0xda0fffff]
[ 0.536484] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xd8100000-0xd90fffff]
[ 0.536542] pci 0000:00:1e.0: transparent bridge
[ 0.536590] pci_bus 0000:00: on NUMA node 0
[ 0.536596] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.536857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.536975] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.537060] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.537144] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.537237] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.537331] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.537456] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
[ 0.545727] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.545842] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.545955] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.546067] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.546179] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.546290] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.546402] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.546514] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.546646] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.546651] vgaarb: loaded
[ 0.546756] SCSI subsystem initialized
[ 0.546797] libata version 3.00 loaded.
[ 0.546797] usbcore: registered new interface driver usbfs
[ 0.546797] usbcore: registered new interface driver hub
[ 0.546797] usbcore: registered new device driver usb
[ 0.546797] ACPI: WMI: Mapper loaded
[ 0.546797] PCI: Using ACPI for IRQ routing
[ 0.546797] NetLabel: Initializing
[ 0.546797] NetLabel: domain hash size = 128
[ 0.546797] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.546797] NetLabel: unlabeled traffic allowed by default
[ 0.546797] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.546797] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.552009] Switching to clocksource tsc
[ 0.553700] AppArmor: AppArmor Filesystem Enabled
[ 0.553707] pnp: PnP ACPI init
[ 0.553713] ACPI: bus type pnp registered
[ 0.680720] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.5 BAR 13 (0x1000-0x1fff), disabling
[ 0.681314] alloc irq_desc for 23 on node -1
[ 0.681316] alloc kstat_irqs on node -1
[ 0.681696] pnp: PnP ACPI: found 11 devices
[ 0.681698] ACPI: ACPI bus type pnp unregistered
[ 0.681701] PnPBIOS: Disabled by ACPI PNP
[ 0.681709] system 00:01: ioport range 0x600-0x60f has been reserved
[ 0.681711] system 00:01: ioport range 0x610-0x610 has been reserved
[ 0.681714] system 00:01: ioport range 0x800-0x80f has been reserved
[ 0.681716] system 00:01: ioport range 0x810-0x817 has been reserved
[ 0.681718] system 00:01: ioport range 0x820-0x823 has been reserved
[ 0.681720] system 00:01: ioport range 0x400-0x47f has been reserved
[ 0.681722] system 00:01: ioport range 0x500-0x53f has been reserved
[ 0.681725] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.681727] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.681730] system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
[ 0.681732] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.681734] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.681737] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.681739] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.681741] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.716378] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[ 0.716382] pci 0000:05:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff]
[ 0.716446] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
[ 0.716448] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.716451] pci 0000:00:01.0: IO window: 0x8000-0x8fff
[ 0.716454] pci 0000:00:01.0: MEM window: 0xd0000000-0xd2ffffff
[ 0.716457] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.716461] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.716464] pci 0000:00:1c.0: IO window: 0x7000-0x7fff
[ 0.716469] pci 0000:00:1c.0: MEM window: 0xde300000-0xdf2fffff
[ 0.716473] pci 0000:00:1c.0: PREFETCH window: 0x000000d3000000-0x000000d3ffffff
[ 0.716480] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.716483] pci 0000:00:1c.1: IO window: 0x6000-0x6fff
[ 0.716488] pci 0000:00:1c.1: MEM window: 0xdd300000-0xde2fffff
[ 0.716492] pci 0000:00:1c.1: PREFETCH window: 0x000000d4000000-0x000000d4ffffff
[ 0.716498] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.716501] pci 0000:00:1c.2: IO window: 0x5000-0x5fff
[ 0.716506] pci 0000:00:1c.2: MEM window: 0xdc200000-0xdd2fffff
[ 0.716510] pci 0000:00:1c.2: PREFETCH window: 0x000000d5000000-0x000000d5ffffff
[ 0.716517] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.716520] pci 0000:00:1c.3: IO window: 0x3000-0x4fff
[ 0.716525] pci 0000:00:1c.3: MEM window: 0xdb200000-0xdc1fffff
[ 0.716529] pci 0000:00:1c.3: PREFETCH window: 0x000000d6000000-0x000000d70fffff
[ 0.716536] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
[ 0.716539] pci 0000:00:1c.4: IO window: 0x2000-0x2fff
[ 0.716544] pci 0000:00:1c.4: MEM window: 0xda100000-0xdb1fffff
[ 0.716548] pci 0000:00:1c.4: PREFETCH window: 0x000000d7100000-0x000000d80fffff
[ 0.716554] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07
[ 0.716557] pci 0000:00:1c.5: IO window: 0x1000-0x1fff
[ 0.716562] pci 0000:00:1c.5: MEM window: 0xd9100000-0xda0fffff
[ 0.716567] pci 0000:00:1c.5: PREFETCH window: 0x000000d8100000-0x000000d90fffff
[ 0.716573] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 0.716575] pci 0000:00:1e.0: IO window: disabled
[ 0.716580] pci 0000:00:1e.0: MEM window: disabled
[ 0.716583] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.716594] alloc irq_desc for 16 on node -1
[ 0.716595] alloc kstat_irqs on node -1
[ 0.716599] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.716603] pci 0000:00:01.0: setting latency timer to 64
[ 0.716610] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.716614] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.716620] pci 0000:00:1c.0: setting latency timer to 64
[ 0.716627] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[ 0.716630] alloc irq_desc for 17 on node -1
[ 0.716632] alloc kstat_irqs on node -1
[ 0.716635] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.716639] pci 0000:00:1c.1: setting latency timer to 64
[ 0.716649] alloc irq_desc for 18 on node -1
[ 0.716651] alloc kstat_irqs on node -1
[ 0.716653] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.716658] pci 0000:00:1c.2: setting latency timer to 64
[ 0.716666] alloc irq_desc for 19 on node -1
[ 0.716667] alloc kstat_irqs on node -1
[ 0.716670] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.716674] pci 0000:00:1c.3: setting latency timer to 64
[ 0.716682] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.716686] pci 0000:00:1c.4: setting latency timer to 64
[ 0.716694] pci 0000:00:1c.5: enabling device (0000 -> 0003)
[ 0.716697] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.716702] pci 0000:00:1c.5: setting latency timer to 64
[ 0.716708] pci 0000:00:1e.0: setting latency timer to 64
[ 0.716712] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.716714] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.716716] pci_bus 0000:01: resource 0 io: [0x8000-0x8fff]
[ 0.716718] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd2ffffff]
[ 0.716720] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.716722] pci_bus 0000:02: resource 0 io: [0x7000-0x7fff]
[ 0.716724] pci_bus 0000:02: resource 1 mem: [0xde300000-0xdf2fffff]
[ 0.716726] pci_bus 0000:02: resource 2 pref mem [0xd3000000-0xd3ffffff]
[ 0.716728] pci_bus 0000:03: resource 0 io: [0x6000-0x6fff]
[ 0.716730] pci_bus 0000:03: resource 1 mem: [0xdd300000-0xde2fffff]
[ 0.716732] pci_bus 0000:03: resource 2 pref mem [0xd4000000-0xd4ffffff]
[ 0.716734] pci_bus 0000:04: resource 0 io: [0x5000-0x5fff]
[ 0.716736] pci_bus 0000:04: resource 1 mem: [0xdc200000-0xdd2fffff]
[ 0.716738] pci_bus 0000:04: resource 2 pref mem [0xd5000000-0xd5ffffff]
[ 0.716740] pci_bus 0000:05: resource 0 io: [0x3000-0x4fff]
[ 0.716742] pci_bus 0000:05: resource 1 mem: [0xdb200000-0xdc1fffff]
[ 0.716744] pci_bus 0000:05: resource 2 pref mem [0xd6000000-0xd70fffff]
[ 0.716746] pci_bus 0000:06: resource 0 io: [0x2000-0x2fff]
[ 0.716748] pci_bus 0000:06: resource 1 mem: [0xda100000-0xdb1fffff]
[ 0.716750] pci_bus 0000:06: resource 2 pref mem [0xd7100000-0xd80fffff]
[ 0.716752] pci_bus 0000:07: resource 0 io: [0x1000-0x1fff]
[ 0.716754] pci_bus 0000:07: resource 1 mem: [0xd9100000-0xda0fffff]
[ 0.716756] pci_bus 0000:07: resource 2 pref mem [0xd8100000-0xd90fffff]
[ 0.716759] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 0.716761] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffff]
[ 0.716784] NET: Registered protocol family 2
[ 0.716860] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.717119] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.717614] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.717849] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.717851] TCP reno registered
[ 0.717907] NET: Registered protocol family 1
[ 2.320006] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.920006] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.920142] pci 0000:01:00.0: Boot video device
[ 3.920163] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 3.920165] Simple Boot Flag at 0x44 set to 0x1
[ 3.920289] cpufreq-nforce2: No nForce2 chipset.
[ 3.920308] Scanning for low memory corruption every 60 seconds
[ 3.920384] audit: initializing netlink socket (disabled)
[ 3.920391] type=2000 audit(1290851364.920:1): initialized
[ 3.928331] highmem bounce pool size: 64 pages
[ 3.928335] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 3.929530] VFS: Disk quotas dquot_6.5.2
[ 3.929577] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.930030] fuse init (API version 7.13)
[ 3.930097] msgmni has been set to 1679
[ 3.930258] alg: No test for stdrng (krng)
[ 3.930297] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.930299] io scheduler noop registered
[ 3.930301] io scheduler anticipatory registered
[ 3.930303] io scheduler deadline registered
[ 3.930335] io scheduler cfq registered (default)
[ 3.930449] alloc irq_desc for 24 on node -1
[ 3.930451] alloc kstat_irqs on node -1
[ 3.930456] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 3.930461] pcieport 0000:00:01.0: setting latency timer to 64
[ 3.930573] alloc irq_desc for 25 on node -1
[ 3.930574] alloc kstat_irqs on node -1
[ 3.930582] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 3.930592] pcieport 0000:00:1c.0: setting latency timer to 64
[ 3.930732] alloc irq_desc for 26 on node -1
[ 3.930733] alloc kstat_irqs on node -1
[ 3.930741] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 3.930751] pcieport 0000:00:1c.1: setting latency timer to 64
[ 3.930890] alloc irq_desc for 27 on node -1
[ 3.930891] alloc kstat_irqs on node -1
[ 3.930899] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 3.930909] pcieport 0000:00:1c.2: setting latency timer to 64
[ 3.931045] alloc irq_desc for 28 on node -1
[ 3.931047] alloc kstat_irqs on node -1
[ 3.931054] pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
[ 3.931064] pcieport 0000:00:1c.3: setting latency timer to 64
[ 3.931202] alloc irq_desc for 29 on node -1
[ 3.931203] alloc kstat_irqs on node -1
[ 3.931211] pcieport 0000:00:1c.4: irq 29 for MSI/MSI-X
[ 3.931221] pcieport 0000:00:1c.4: setting latency timer to 64
[ 3.931359] alloc irq_desc for 30 on node -1
[ 3.931360] alloc kstat_irqs on node -1
[ 3.931368] pcieport 0000:00:1c.5: irq 30 for MSI/MSI-X
[ 3.931378] pcieport 0000:00:1c.5: setting latency timer to 64
[ 3.931471] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.931717] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 4.072060] ACPI: AC Adapter [AC] (on-line)
[ 4.072129] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 4.072132] ACPI: Power Button [PWRB]
[ 4.072165] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 4.072221] ACPI: Lid Switch [LID0]
[ 4.072256] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 4.072262] ACPI: Sleep Button [SLPB]
[ 4.072308] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.072310] ACPI: Power Button [PWRF]
[ 4.140050] fan PNP0C0B:00: registered as cooling_device0
[ 4.140055] ACPI: Fan [FAN] (on)
[ 4.140865] ACPI: SSDT bfc77c18 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 4.141387] ACPI: SSDT bfc75618 00594 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 4.141795] Monitor-Mwait will be used to enter C-1 state
[ 4.141816] Monitor-Mwait will be used to enter C-2 state
[ 4.141836] Monitor-Mwait will be used to enter C-3 state
[ 4.141842] Marking TSC unstable due to TSC halts in idle
[ 4.141867] Switching to clocksource hpet
[ 4.141903] processor LNXCPU:00: registered as cooling_device1
[ 4.142323] ACPI: SSDT bfc76e18 001CF (v01 PmRef ApIst 00003000 INTL 20060912)
[ 4.142730] ACPI: SSDT bfc77f18 0008D (v01 PmRef ApCst 00003000 INTL 20060912)
[ 4.143272] processor LNXCPU:01: registered as cooling_device2
[ 4.332050] thermal LNXTHERM:01: registered as thermal_zone0
[ 4.332056] ACPI: Thermal Zone [THRM] (55 C)
[ 4.332172] isapnp: Scanning for PnP cards...
[ 4.333236] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.334307] brd: module loaded
[ 4.334689] loop: module loaded
[ 4.334744] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 4.335055] Fixed MDIO Bus: probed
[ 4.335080] PPP generic driver version 2.4.2
[ 4.335108] tun: Universal TUN/TAP device driver, 1.6
[ 4.335109] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 4.335167] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.335184] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.335192] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.335195] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.335219] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.335245] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.339144] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.339156] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xdf304c00
[ 4.352014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.352079] usb usb1: configuration #1 chosen from 1 choice
[ 4.352103] hub 1-0:1.0: USB hub found
[ 4.352109] hub 1-0:1.0: 4 ports detected
[ 4.352155] alloc irq_desc for 20 on node -1
[ 4.352157] alloc kstat_irqs on node -1
[ 4.352161] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.352169] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.352172] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.352195] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.352219] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.356113] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.356124] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdf304800
[ 4.372013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.372082] usb usb2: configuration #1 chosen from 1 choice
[ 4.372102] hub 2-0:1.0: USB hub found
[ 4.372111] hub 2-0:1.0: 8 ports detected
[ 4.372164] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.372176] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.372190] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.372196] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.372199] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.372224] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.372255] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000090e0
[ 4.372322] usb usb3: configuration #1 chosen from 1 choice
[ 4.372342] hub 3-0:1.0: USB hub found
[ 4.372347] hub 3-0:1.0: 2 ports detected
[ 4.372384] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.372390] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.372393] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.372416] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.372446] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000090c0
[ 4.372519] usb usb4: configuration #1 chosen from 1 choice
[ 4.372539] hub 4-0:1.0: USB hub found
[ 4.372544] hub 4-0:1.0: 2 ports detected
[ 4.372586] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.372592] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.372595] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.372622] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 4.372645] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000090a0
[ 4.372713] usb usb5: configuration #1 chosen from 1 choice
[ 4.372732] hub 5-0:1.0: USB hub found
[ 4.372737] hub 5-0:1.0: 2 ports detected
[ 4.372773] alloc irq_desc for 22 on node -1
[ 4.372775] alloc kstat_irqs on node -1
[ 4.372778] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 4.372784] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.372787] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.372811] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 4.372842] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00009080
[ 4.372909] usb usb6: configuration #1 chosen from 1 choice
[ 4.372931] hub 6-0:1.0: USB hub found
[ 4.372936] hub 6-0:1.0: 2 ports detected
[ 4.372976] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.372981] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.372984] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.373008] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 4.373032] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009060
[ 4.373100] usb usb7: configuration #1 chosen from 1 choice
[ 4.373122] hub 7-0:1.0: USB hub found
[ 4.373126] hub 7-0:1.0: 2 ports detected
[ 4.373160] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 4.373166] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 4.373169] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.373191] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 4.373222] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00009040
[ 4.373293] usb usb8: configuration #1 chosen from 1 choice
[ 4.373312] hub 8-0:1.0: USB hub found
[ 4.373318] hub 8-0:1.0: 2 ports detected
[ 4.373389] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 4.407820] ACPI: Battery Slot [BAT0] (battery absent)
[ 4.417279] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.417284] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.417340] mice: PS/2 mouse device common for all mice
[ 4.417451] rtc_cmos 00:03: RTC can wake from S4
[ 4.417477] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.417507] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 4.417580] device-mapper: uevent: version 1.0.3
[ 4.417648] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 4.417696] device-mapper: multipath: version 1.1.0 loaded
[ 4.417698] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.417779] EISA: Probing bus 0 at eisa.0
[ 4.417784] Cannot allocate resource for EISA slot 1
[ 4.417785] Cannot allocate resource for EISA slot 2
[ 4.417787] Cannot allocate resource for EISA slot 3
[ 4.417789] Cannot allocate resource for EISA slot 4
[ 4.417790] Cannot allocate resource for EISA slot 5
[ 4.417792] Cannot allocate resource for EISA slot 6
[ 4.417793] Cannot allocate resource for EISA slot 7
[ 4.417795] Cannot allocate resource for EISA slot 8
[ 4.417796] EISA: Detected 0 cards.
[ 4.417903] cpuidle: using governor ladder
[ 4.417991] cpuidle: using governor menu
[ 4.418329] TCP cubic registered
[ 4.418450] NET: Registered protocol family 10
[ 4.418822] lo: Disabled Privacy Extensions
[ 4.419088] NET: Registered protocol family 17
[ 4.419442] Using IPI No-Shortcut mode
[ 4.419497] PM: Resume from disk failed.
[ 4.419504] registered taskstats version 1
[ 4.420193] Magic number: 2:800:829
[ 4.420242] rtc_cmos 00:03: setting system clock to 2010-11-27 09:49:26 UTC (1290851366)
[ 4.420245] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.420246] EDD information not available.
[ 4.459871] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 4.687834] isapnp: No Plug & Play device found
[ 4.687890] Freeing unused kernel memory: 656k freed
[ 4.688198] Write protecting the kernel text: 4676k
[ 4.688234] Write protecting the kernel read-only data: 1840k
[ 4.701112] udev: starting version 151
[ 4.763217] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.763238] r8169 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.763282] r8169 0000:05:00.0: setting latency timer to 64
[ 4.763337] alloc irq_desc for 31 on node -1
[ 4.763339] alloc kstat_irqs on node -1
[ 4.763354] r8169 0000:05:00.0: irq 31 for MSI/MSI-X
[ 4.763872] eth0: RTL8168c/8111c at 0xf808e000, 00:1e:ec:8a:f4:f0, XID 1c4000c0 IRQ 31
[ 4.766815] ahci 0000:00:1f.2: version 3.0
[ 4.766826] alloc irq_desc for 21 on node -1
[ 4.766828] alloc kstat_irqs on node -1
[ 4.766832] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.766949] alloc irq_desc for 32 on node -1
[ 4.766950] alloc kstat_irqs on node -1
[ 4.766959] ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
[ 4.766975] ahci 0000:00:1f.2: BIOS update required for suspend/resume
[ 4.767131] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 4.767134] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs
[ 4.767139] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.802829] scsi0 : ahci
[ 4.803310] scsi1 : ahci
[ 4.803359] scsi2 : ahci
[ 4.803409] scsi3 : ahci
[ 4.803455] scsi4 : ahci
[ 4.803502] scsi5 : ahci
[ 4.803750] ata1: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304100 irq 32
[ 4.803754] ata2: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304180 irq 32
[ 4.803756] ata3: DUMMY
[ 4.803757] ata4: DUMMY
[ 4.803759] ata5: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304300 irq 32
[ 4.803762] ata6: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304380 irq 32
[ 4.832060] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 4.992920] usb 2-5: configuration #1 chosen from 1 choice
[ 5.120073] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.120123] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.232060] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 5.284067] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.284086] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.285215] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 5.285358] ata1.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 5.285459] ata1.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) succeeded
[ 5.285464] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 5.285597] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 5.285694] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) succeeded
[ 5.286475] ata1.00: ATA-8: TOSHIBA MK3252GSX, LV011C, max UDMA/100
[ 5.286479] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.287772] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 5.287885] ata1.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 5.287890] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 5.288051] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 5.288115] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) succeeded
[ 5.288924] ata1.00: configured for UDMA/100
[ 5.297668] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) succeeded
[ 5.298031] ata2.00: ACPI cmd ef/10:01:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 5.298642] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 5.298647] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 (SET FEATURES) filtered out
[ 5.299045] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 5.299392] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 5.304184] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5
[ 5.304307] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.304386] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 5.304422] sd 0:0:0:0: [sda] Write Protect is off
[ 5.304424] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.304443] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.304558] sda:
[ 5.312086] ata2.00: ATAPI: Optiarc DVD RW AD-7561S, AH03, max UDMA/100
[ 5.326460] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) succeeded
[ 5.326853] ata2.00: ACPI cmd ef/10:01:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 5.327168] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 5.327172] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 (SET FEATURES) filtered out
[ 5.327483] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 5.327881] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 5.340589] ata2.00: configured for UDMA/100
[ 5.357039] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7561S AH03 PQ: 0 ANSI: 5
[ 5.362564] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.362568] Uniform CD-ROM driver Revision: 3.20
[ 5.362671] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.362724] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.380128] sda1 sda2 sda3 sda4 <
[ 5.390380] usb 3-2: configuration #1 chosen from 1 choice
[ 5.405702] sda5 sda6 >
[ 5.417762] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.632031] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 5.798779] usb 5-1: configuration #1 chosen from 1 choice
[ 5.809547] usbcore: registered new interface driver hiddev
[ 5.821906] input: USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input6
[ 5.821975] generic-usb 0003:15D9:0A33.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1d.0-1/input0
[ 5.821993] usbcore: registered new interface driver usbhid
[ 5.821994] usbhid: v2.6:USB HID core driver
[ 6.041486] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 16.532700] udev: starting version 151
[ 16.556620] Adding 994296k swap on /dev/sda6. Priority:-1 extents:1 across:994296k
[ 16.605820] Linux agpgart interface v0.103
[ 16.653345] lp: driver loaded but no devices found
[ 16.731657] sdhci: Secure Digital Host Controller Interface driver
[ 16.731659] sdhci: Copyright(c) Pierre Ossman
[ 16.733228] sdhci-pci 0000:06:00.0: SDHCI controller found [197b:2382] (rev 0)
[ 16.733252] sdhci-pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.733290] sdhci-pci 0000:06:00.0: setting latency timer to 64
[ 16.733317] Registered led device: mmc0::
[ 16.733347] mmc0: SDHCI controller on PCI [0000:06:00.0] using ADMA
[ 16.733367] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 16.733385] sdhci-pci 0000:06:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.733390] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[ 16.733397] sdhci-pci 0000:06:00.2: PCI INT A disabled
[ 16.748488] [drm] Initialized drm 1.1.0 20060810
[ 16.753763] type=1505 audit(1290844178.832:2): operation="profile_load" pid=623 name="/sbin/dhclient3"
[ 16.754299] type=1505 audit(1290844178.832:3): operation="profile_load" pid=623 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 16.754587] type=1505 audit(1290844178.832:4): operation="profile_load" pid=623 name="/usr/lib/connman/scripts/dhclient-script"
[ 16.767751] lirc_dev: IR Remote Control driver registered, major 61
[ 16.768494] lirc_dev: lirc_register_driver: sample_rate: 0
[ 16.768850] enecir: KB3926C detected, driver support is not complete!
[ 16.768852] enecir: chip is 0x3926 - 0x00, 0xc0
[ 16.768859] enecir: hardware features:
[ 16.768860] enecir: learning and tx off, gpio40_learn off, fan_in off
[ 16.768861] enecir: driver has been succesfully loaded
[ 16.771474] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 16.775248] Linux video capture interface: v2.00
[ 16.777922] uvcvideo: Found UVC 1.00 device HP Webcam (046d:09b8)
[ 16.778485] cfg80211: Calling CRDA to update world regulatory domain
[ 16.784184] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input7
[ 16.784255] usbcore: registered new interface driver uvcvideo
[ 16.784375] USB Video Class driver (v0.1.0)
[ 16.823532] jmb38x_ms 0000:06:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.823540] jmb38x_ms 0000:06:00.3: setting latency timer to 64
[ 16.831003] lis3lv02d: laptop model unknown, using default axes configuration
[ 16.859609] acpi device:06: registered as cooling_device3
[ 16.859776] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input8
[ 16.859817] ACPI: Video Device [EVGA] (multi-head: yes rom: no post: no)
[ 16.865248] lis3lv02d: 1-byte sensor found
[ 16.869130] cfg80211: World regulatory domain updated:
[ 16.869132] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 16.869135] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.869137] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.869139] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.869141] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.869143] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.874570] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9
[ 16.874737] Registered led device: hp::hddprotect
[ 16.874770] lis3lv02d driver loaded.
[ 16.887951] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.887964] nouveau 0000:01:00.0: setting latency timer to 64
[ 16.888991] [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5
[ 16.902271] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[ 16.902273] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 16.902488] iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 16.902518] iwlagn 0000:04:00.0: setting latency timer to 64
[ 16.902569] iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 16.904756] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x298400a2)
[ 16.905629] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 16.969230] iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 16.969379] alloc irq_desc for 33 on node -1
[ 16.969381] alloc kstat_irqs on node -1
[ 16.969431] iwlagn 0000:04:00.0: irq 33 for MSI/MSI-X
[ 16.977549] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 17.036513] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 17.036517] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 17.036519] [drm] nouveau 0000:01:00.0: Bios version 62.98.22.00
[ 17.036522] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
[ 17.036525] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 17.036528] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 17.036530] [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff
[ 17.036532] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[ 17.036535] [drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07
[ 17.036537] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034
[ 17.036540] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
[ 17.036542] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02032332 00020010
[ 17.036544] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000
[ 17.036560] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD4C4
[ 17.088165] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD83B
[ 17.096096] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 17.096108] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 17.096112] hda_intel: msi for device 103c:30f7 set to 1
[ 17.096164] alloc irq_desc for 34 on node -1
[ 17.096167] alloc kstat_irqs on node -1
[ 17.096180] HDA Intel 0000:00:1b.0: irq 34 for MSI/MSI-X
[ 17.096223] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 17.112035] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE0E1
[ 17.112055] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE1D3
[ 17.121904] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE39D
[ 17.121907] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE402
[ 17.145179] [drm] nouveau 0000:01:00.0: 0xE402: Condition still not met after 20ms, skipping following opcodes
[ 17.145196] [drm] nouveau 0000:01:00.0: 0xC0A6: parsing output script 0
[ 17.145199] [drm] nouveau 0000:01:00.0: 0xC4C6: parsing output script 0
[ 17.245551] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 17.265332] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 17.265407] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 17.309077] [TTM] Zone kernel: Available graphics memory: 430224 kiB.
[ 17.309079] [TTM] Zone highmem: Available graphics memory: 1547080 kiB.
[ 17.309096] [drm] nouveau 0000:01:00.0: 256 MiB VRAM
[ 17.333499] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 17.335263] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 17.340584] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 17.341449] [drm] nouveau 0000:01:00.0: Detected a LVDS output
[ 17.341460] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 17.341462] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 17.341465] [drm] nouveau 0000:01:00.0: Detected a LVDS connector
[ 17.455814] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 17.455950] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
[ 17.730013] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input13
[ 17.781045] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input14
[ 18.568977] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x40250000, bo f4882e00
[ 18.569024] fb0: nouveaufb frame buffer device
[ 18.569025] registered panic notifier
[ 18.569029] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 18.570382] vga16fb: initializing
[ 18.570384] vga16fb: mapped to 0xc00a0000
[ 18.570386] vga16fb: not registering due to another framebuffer present
[ 18.579891] [drm] nouveau 0000:01:00.0: 0xC0AA: parsing output script 1
[ 18.579910] [drm] nouveau 0000:01:00.0: 0xBF19: parsing clock script 0
[ 18.579958] Console: switching to colour frame buffer device 160x50
[ 18.834327] [drm] nouveau 0000:01:00.0: 0xC0A1: parsing clock script 1
[ 19.048709] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 19.246254] r8169: eth0: link down
[ 19.246434] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.253341] type=1505 audit(1290844181.331:5): operation="profile_load" pid=1036 name="/usr/share/gdm/guest-session/Xsession"
[ 19.254630] type=1505 audit(1290844181.331:6): operation="profile_replace" pid=1038 name="/sbin/dhclient3"
[ 19.255181] type=1505 audit(1290844181.331:7): operation="profile_replace" pid=1038 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 19.255474] type=1505 audit(1290844181.331:8): operation="profile_replace" pid=1038 name="/usr/lib/connman/scripts/dhclient-script"
[ 19.258009] type=1505 audit(1290844181.335:9): operation="profile_load" pid=1039 name="/usr/bin/evince"
[ 19.264931] type=1505 audit(1290844181.343:10): operation="profile_load" pid=1039 name="/usr/bin/evince-previewer"
[ 19.269163] type=1505 audit(1290844181.347:11): operation="profile_load" pid=1039 name="/usr/bin/evince-thumbnailer"
[ 19.502592] ppdev: user-space parallel port driver
[ 19.761427] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[ 19.766622] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
[ 19.918159] CPU0 attaching NULL sched-domain.
[ 19.918162] CPU1 attaching NULL sched-domain.
[ 19.940654] CPU0 attaching sched-domain:
[ 19.940657] domain 0: span 0-1 level MC
[ 19.940661] groups: 0 1
[ 19.940667] CPU1 attaching sched-domain:
[ 19.940669] domain 0: span 0-1 level MC
[ 19.940672] groups: 1 0
[ 21.143546] CPU0 attaching NULL sched-domain.
[ 21.143550] CPU1 attaching NULL sched-domain.
[ 21.163566] CPU0 attaching sched-domain:
[ 21.163569] domain 0: span 0-1 level MC
[ 21.163571] groups: 0 1
[ 21.163576] CPU1 attaching sched-domain:
[ 21.163577] domain 0: span 0-1 level MC
[ 21.163579] groups: 1 0
Module Size Used by
binfmt_misc 6587 1
ppdev 5259 0
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
vga16fb 11385 0
vgastate 8961 1 vga16fb
snd_hda_codec_nvhdmi 3840 1
snd_hda_codec_idt 51914 1
snd_hda_intel 21877 2
snd_hda_codec 74201 3 snd_hda_codec_nvhdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep 5412 1 snd_hda_codec
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70662 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 1338 0
snd_seq_oss 26726 0
snd_seq_midi 4557 0
snd_rawmidi 19056 1 snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
arc4 1153 2
joydev 8708 0
iwlagn 105566 0
snd_timer 19098 2 snd_pcm,snd_seq
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
nouveau 467048 2
iwlcore 105922 1 iwlagn
hp_accel 11144 0
snd 54148 16 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
jmb38x_ms 7311 0
mac80211 204922 2 iwlagn,iwlcore
lis3lv02d 6007 1 hp_accel
ttm 49943 1 nouveau
drm_kms_helper 29297 1 nouveau
uvcvideo 56990 0
videodev 34361 1 uvcvideo
v4l1_compat 13251 2 uvcvideo,videodev
input_polldev 2482 1 lis3lv02d
video 17375 0
output 1871 1 video
lirc_ene0100 6536 0
lirc_dev 8884 1 lirc_ene0100
psmouse 63245 0
serio_raw 3978 0
cfg80211 126485 3 iwlagn,iwlcore,mac80211
memstick 8237 1 jmb38x_ms
sdhci_pci 5470 0
sdhci 15462 1 sdhci_pci
led_class 2864 3 iwlcore,hp_accel,sdhci
soundcore 6620 1 snd
snd_page_alloc 7076 2 snd_hda_intel,snd_pcm
intel_agp 24177 0
drm 162471 4 nouveau,ttm,drm_kms_helper
agpgart 31724 3 ttm,intel_agp,drm
lp 7028 0
parport 32635 2 ppdev,lp
i2c_algo_bit 5028 1 nouveau
usbhid 36110 0
hid 67032 1 usbhid
r8169 33884 0
mii 4381 1 r8169
ahci 32008 4
