Jesus, Something is causing the driver to not work correctly, i.e, a conflict. Novuevau and modem hcfpcimodem are sharing resources and this is causing the modem to fail :( > Modem interrupt assignment and sharing: > 16: 4 IO-APIC-fasteoi nouveau, hcfpcihw [ 924.781371] hcfpcihw 0000:00:0c.0: PCI INT A disabled [ 960.815473] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 961.595176] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF controllerless PCI modem (PCI-14f1:1033-1092:0ac8) [ 961.851799] hcfpcihw 0000:00:0c.0: PCI INT A disabled [ 963.182548] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 963.882184] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF controllerless PCI modem (PCI-14f1:1033-1092:0ac8) [ 984.612035] No probe response from AP 00:80:5a:28:6e:0e after 500ms, disconnecting. Hopefully Jonathan (Linuxant support) has some suggestions you can try out. Regards, Antonio On Fri, Nov 26, 2010 at 4:24 AM, jvg <macjvg@xxxxxxxxx> wrote: > Greetings to everyone. > It follows scanMode output after following instructions on installing > modem-fax pci software on Ubuntu 10.10. It doesn't work neither > Any help will be appreciated. > Regards, > > Jesús > > ModemData.txt------------------------------------ > > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List > Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry kernel 2.6.35-22-generic > With this Subject Line cogent experts will be alerted, and useful case > names left in the Archive. > YourCountry will enable Country specific guidance. Linux experts in > YourCountry > can be found through: http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be essential for > dialup service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an > Internet Provider mail filters. > So in a day, also check the Archived responses at > http://www.linmodems.org > -------------------------- System information > ---------------------------- > CPU=i686, Ubuntu , ALSA_version=1.0.23 > Linux version 2.6.35-22-generic (buildd@vernadsky) (gcc version 4.4.5 > (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #35-Ubuntu SMP Sat Oct 16 20:36:48 UTC > 2010 > scanModem update of: 2010_05_29 > The modem symbolic link is /dev/modem -> ttySHCF0 > Distrib_ID=Ubuntu > DistribCodeName=maverick > AptRepositoryStem=http://es.archive.ubuntu.com/ubuntu/ > > > The dkms driver upgrade utilities are installed, > > There are no blacklisted modem drivers in /etc/modprobe* files > > Potentially useful modem drivers now loaded are: > slamr > > slamrTest= > Attached USB devices are: > ID 06bd:2091 AGFA-Gevaert NV SnapScan e20 > ID ffc0:0001 > ID 0783:0006 C3PO LTC31v2 > ID 047f:0ca1 Plantronics, Inc. USB DSP v4 Audio Interface > ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer > ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g > 54Mbps Network Adapter > If a cellphone is not detected, see > http://ubuntuforums.org/archive/index.php/t-878554.html > A sample report is: > http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html > > If a USB modem or cellphone is attached and was not detected, please > provide available information in your request to discuss@xxxxxxxxxxxxx > > Candidate PCI devices with modem chips are: > 00:0c.0 Communication controller: Conexant Systems, Inc. HCF 56k > Data/Fax Modem (rev 08) > High Definition Audio cards can host modem chips. > > For candidate card in slot 00:0c.0, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:0c.0 14f1:1033 1092:0ac8 Communication controller: Conexant Systems, > Inc. HCF 56k Data/Fax Modem > > Modem interrupt assignment and sharing: > 16: 4 IO-APIC-fasteoi nouveau, hcfpcihw > --- Bootup diagnostics for card in PCI slot 00:0c.0 ---- > [ 0.115157] pci 0000:00:0c.0: reg 10: [mem 0xfebe0000-0xfebeffff] > [ 0.115169] pci 0000:00:0c.0: reg 14: [io 0xc000-0xc007] > [ 0.115227] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold > [ 0.115235] pci 0000:00:0c.0: PME# disabled > [ 499.897864] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > [ 501.765444] hcfpcihw 0000:00:0c.0: PCI INT A disabled > [ 503.018257] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > [ 505.215408] hcfpcihw 0000:00:0c.0: PCI INT A disabled > [ 506.805357] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > [ 924.781371] hcfpcihw 0000:00:0c.0: PCI INT A disabled > [ 960.815473] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > [ 961.851799] hcfpcihw 0000:00:0c.0: PCI INT A disabled > [ 963.182548] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > [ 2303.485359] hcfpcihw 0000:00:0c.0: PCI INT A disabled > [ 2303.721466] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > [ 3607.929090] hcfpcihw 0000:00:0c.0: PCI INT A disabled > [ 3646.336789] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > [ 3984.717732] hcfpcihw 0000:00:0c.0: PCI INT A disabled > [ 4021.495374] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > [ 4022.446913] hcfpcihw 0000:00:0c.0: PCI INT A disabled > [ 4023.825258] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > > The PCI slot 00:0c.0 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible > fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > === Finished firmware and bootup diagnostics, next deducing cogent > software. === > > Predictive diagnostics for card in bus 00:0c.0: > Modem chipset not detected on > NAME="Communication controller: Conexant Systems, Inc. HCF 56k Data/Fax > Modem " > CLASS=0780 > PCIDEV=14f1:1033 > SUBSYS=1092:0ac8 > IRQ=16 > IDENT=hcfpcimodem > > For candidate modem in: 00:0c.0 > > Primary device ID: > Support type needed or chipset: > > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.4.5 > and the compiler used in kernel assembly: 4.4.5 > > linux-headers-2.6.35-22-generic resources needed for compiling are not > manifestly ready! > > If compiling is necessary packages must be installed, providing: > linux-headers-2.6.35-22-generic > > > If a driver compilation fails, with message including some lack of some > FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. > The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > For guidance on FAX usage, get from > http://linmodems.technion.ac.il/packages/ get faxing.tar.gz > It has samples for a modem using port /dev/ttySL0, which must be changed > to match your modem's port. > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1 > wlan0 wlan3 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble > shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: lrwxrwxrwx 1 root root 8 2010-11-26 > 10:06 /dev/modem -> ttySHCF0 > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > /etc/udev/rules.d/00-hcfpci.rules:KERNEL=="ttySHCF0", SYMLINK="modem" > Within /etc/modprobe.conf files: > /etc/modprobe.d/sl-modem.conf:install slamr /sbin/modprobe -qb > ungrab-winmodem; /sbin/modprobe --ignore-install slamr; test > -e /dev/slamr0 && (chmod 660 /dev/slamr0 && chgrp dialout /dev/slamr0) > || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp > dialout /dev/slamr0) > /etc/modprobe.d/sl-modem.conf:install slusb /sbin/modprobe -qb > ungrab-winmodem; /sbin/modprobe --ignore-install slusb; test > -e /dev/slusb0 && (chmod 660 /dev/slusb0 && chgrp dialout /dev/slusb0) > || (/bin/mknod -m 660 /dev/slusb0 c 243 0 2>/dev/null && chgrp > dialout /dev/slusb0) > /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2 > /etc/modprobe.d/hcfpci.conf:alias /dev/modem /dev/ttySHCF > /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order > to blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem > Within any ancient /etc/devfs files: > Within ancient kernel 2.4.n /etc/module.conf files: > /etc/modules.conf:alias /dev/modem /dev/ttySHCF > --------- end modem support lines -------- > > -------------------------------------------------------dmsg.txt-------------------------- > CPU0 > 0: 48 IO-APIC-edge timer > 1: 5771 IO-APIC-edge i8042 > 6: 3 IO-APIC-edge floppy > 7: 0 IO-APIC-edge parport0 > 8: 0 IO-APIC-edge rtc0 > 9: 0 IO-APIC-fasteoi acpi > 14: 0 IO-APIC-edge pata_via > 15: 356 IO-APIC-edge pata_via > 16: 4 IO-APIC-fasteoi nouveau, hcfpcihw > 17: 0 IO-APIC-fasteoi eth1 > 18: 69 IO-APIC-fasteoi Ensoniq AudioPCI > 19: 58862 IO-APIC-fasteoi b43 > 20: 34590 IO-APIC-fasteoi sata_via > 21: 577982 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2, > uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5 > 23: 0 IO-APIC-fasteoi eth0 > NMI: 0 Non-maskable interrupts > LOC: 1877035 Local timer interrupts > SPU: 0 Spurious interrupts > PMI: 0 Performance monitoring interrupts > PND: 0 Performance pending work > RES: 0 Rescheduling interrupts > CAL: 0 Function call interrupts > TLB: 0 TLB shootdowns > TRM: 0 Thermal event interrupts > THR: 0 Threshold APIC interrupts > MCE: 0 Machine check exceptions > MCP: 17 Machine check polls > ERR: 0 > MIS: 0 > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.35-22-generic (buildd@vernadsky) (gcc > version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #35-Ubuntu SMP Sat Oct > 16 20:36:48 UTC 2010 (Ubuntu 2.6.35-22.35-generic 2.6.35.4) > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 > (reserved) > [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 > (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff30000 (usable) > [ 0.000000] BIOS-e820: 000000007ff30000 - 000000007ff40000 (ACPI > data) > [ 0.000000] BIOS-e820: 000000007ff40000 - 000000007fff0000 (ACPI > NVS) > [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 > (reserved) > [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 > (reserved) > [ 0.000000] NX (Execute Disable) protection: approximated by x86 > segment limits > [ 0.000000] DMI 2.3 present. > [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working > around it. > [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 > (usable) ==> (reserved) > [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 > (usable) ==> (reserved) > [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 > (usable) > [ 0.000000] last_pfn = 0x7ff30 max_arch_pfn = 0x100000 > [ 0.000000] MTRR default type: uncachable > [ 0.000000] MTRR fixed ranges enabled: > [ 0.000000] 00000-9FFFF write-back > [ 0.000000] A0000-DFFFF uncachable > [ 0.000000] E0000-EFFFF write-through > [ 0.000000] F0000-FFFFF write-protect > [ 0.000000] MTRR variable ranges enabled: > [ 0.000000] 0 base 000000000 mask F80000000 write-back > [ 0.000000] 1 disabled > [ 0.000000] 2 disabled > [ 0.000000] 3 disabled > [ 0.000000] 4 disabled > [ 0.000000] 5 disabled > [ 0.000000] 6 disabled > [ 0.000000] 7 disabled > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new > 0x7010600070106 > [ 0.000000] Scanning 0 areas for low memory corruption > [ 0.000000] modified physical RAM map: > [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) > [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) > [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) > [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) > [ 0.000000] modified: 0000000000100000 - 000000007ff30000 (usable) > [ 0.000000] modified: 000000007ff30000 - 000000007ff40000 (ACPI > data) > [ 0.000000] modified: 000000007ff40000 - 000000007fff0000 (ACPI NVS) > [ 0.000000] modified: 000000007fff0000 - 0000000080000000 (reserved) > [ 0.000000] modified: 00000000fffc0000 - 0000000100000000 (reserved) > [ 0.000000] initial memory mapped : 0 - 00c00000 > [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 > [ 0.000000] 0000000000 - 0000400000 page 4k > [ 0.000000] 0000400000 - 0037400000 page 2M > [ 0.000000] 0037400000 - 00377fe000 page 4k > [ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000 > [ 0.000000] RAMDISK: 375ac000 - 37ff0000 > [ 0.000000] Allocated new RAMDISK: 009a5000 - 013e86b5 > [ 0.000000] Move RAMDISK from 00000000375ac000 - 0000000037fef6b4 to > 009a5000 - 013e86b4 > [ 0.000000] ACPI: RSDP 000f9bc0 00014 (v00 ACPIAM) > [ 0.000000] ACPI: RSDT 7ff30000 00030 (v01 A M I OEMRSDT 10000428 > MSFT 00000097) > [ 0.000000] ACPI: FACP 7ff30200 00081 (v02 A M I OEMFACP 10000428 > MSFT 00000097) > [ 0.000000] ACPI: DSDT 7ff30360 0342A (v01 P4V88 P4V88001 00000001 > INTL 02002026) > [ 0.000000] ACPI: FACS 7ff40000 00040 > [ 0.000000] ACPI: APIC 7ff30300 00052 (v01 A M I OEMAPIC 10000428 > MSFT 00000097) > [ 0.000000] ACPI: OEMB 7ff40040 0003F (v01 A M I OEMBIOS 10000428 > MSFT 00000097) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] 1159MB HIGHMEM available. > [ 0.000000] 887MB LOWMEM available. > [ 0.000000] mapped low ram: 0 - 377fe000 > [ 0.000000] low ram: 0 - 377fe000 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000010 -> 0x00001000 > [ 0.000000] Normal 0x00001000 -> 0x000377fe > [ 0.000000] HighMem 0x000377fe -> 0x0007ff30 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0x00000010 -> 0x0000009f > [ 0.000000] 0: 0x00000100 -> 0x0007ff30 > [ 0.000000] On node 0 totalpages: 523967 > [ 0.000000] free_area_init_node: node 0, pgdat c07ffd40, node_mem_map > c13ea200 > [ 0.000000] DMA zone: 32 pages used for memmap > [ 0.000000] DMA zone: 0 pages reserved > [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 > [ 0.000000] Normal zone: 1744 pages used for memmap > [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 > [ 0.000000] HighMem zone: 2319 pages used for memmap > [ 0.000000] HighMem zone: 294435 pages, LIFO batch:31 > [ 0.000000] Using APIC driver default > [ 0.000000] ACPI: PM-Timer IO Port: 0x808 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) > [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI > 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 40 > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - > 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 00000000000e4000 > [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - > 0000000000100000 > [ 0.000000] Allocating PCI resources starting at 80000000 (gap: > 80000000:7ffc0000) > [ 0.000000] Booting paravirtualized kernel on bare hardware > [ 0.000000] early_res array is doubled to 64 at [16000 - 167ff] > [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 > nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36416 r0 d20928 > u2097152 > [ 0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304 > [ 0.000000] pcpu-alloc: [0] 0 1 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 519872 > [ 0.000000] Kernel command line: > BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic > root=UUID=901d9326-5b10-42f2-86b8-8bfb0192bba4 ro quiet splash > [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) > [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 > bytes) > [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 > bytes) > [ 0.000000] Enabling fast FPU save and restore... done. > [ 0.000000] Enabling unmasked SIMD FPU exception support... done. > [ 0.000000] Initializing CPU#0 > [ 0.000000] allocated 10481280 bytes of page_cgroup > [ 0.000000] please try 'cgroup_disable=memory' option if you don't > want memory cgroups > [ 0.000000] Subtract (42 early reservations) > [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE > [ 0.000000] #2 [0000100000 - 00009a0adc] TEXT DATA BSS > [ 0.000000] #3 [000009d800 - 0000100000] BIOS reserved > [ 0.000000] #4 [00009a1000 - 00009a408d] BRK > [ 0.000000] #5 [0000010000 - 0000011000] TRAMPOLINE > [ 0.000000] #6 [0000011000 - 0000015000] ACPI WAKEUP > [ 0.000000] #7 [0000015000 - 0000016000] PGTABLE > [ 0.000000] #8 [00009a5000 - 00013e9000] NEW RAMDISK > [ 0.000000] #9 [00013e9000 - 00013ea000] BOOTMEM > [ 0.000000] #10 [00013ea000 - 00023ea000] BOOTMEM > [ 0.000000] #11 [00023ea000 - 00023ea004] BOOTMEM > [ 0.000000] #12 [00023ea040 - 00023ea100] BOOTMEM > [ 0.000000] #13 [00023ea100 - 00023ea154] BOOTMEM > [ 0.000000] #14 [00023ea180 - 00023ed180] BOOTMEM > [ 0.000000] #15 [00023ed180 - 00023ed1f0] BOOTMEM > [ 0.000000] #16 [00023ed200 - 00023f3200] BOOTMEM > [ 0.000000] #17 [00023f3200 - 00023f3227] BOOTMEM > [ 0.000000] #18 [00023f3240 - 00023f333c] BOOTMEM > [ 0.000000] #19 [00023f3340 - 00023f3380] BOOTMEM > [ 0.000000] #20 [00023f3380 - 00023f33c0] BOOTMEM > [ 0.000000] #21 [00023f33c0 - 00023f3400] BOOTMEM > [ 0.000000] #22 [00023f3400 - 00023f3440] BOOTMEM > [ 0.000000] #23 [00023f3440 - 00023f3480] BOOTMEM > [ 0.000000] #24 [00023f3480 - 00023f34c0] BOOTMEM > [ 0.000000] #25 [00023f34c0 - 00023f3500] BOOTMEM > [ 0.000000] #26 [00023f3500 - 00023f3540] BOOTMEM > [ 0.000000] #27 [00023f3540 - 00023f3550] BOOTMEM > [ 0.000000] #28 [00023f3580 - 00023f35ea] BOOTMEM > [ 0.000000] #29 [00023f3600 - 00023f366a] BOOTMEM > [ 0.000000] #30 [0002400000 - 000240e000] BOOTMEM > [ 0.000000] #31 [0002600000 - 000260e000] BOOTMEM > [ 0.000000] #32 [00023f5680 - 00023f5684] BOOTMEM > [ 0.000000] #33 [00023f56c0 - 00023f56c4] BOOTMEM > [ 0.000000] #34 [00023f5700 - 00023f5708] BOOTMEM > [ 0.000000] #35 [00023f5740 - 00023f5748] BOOTMEM > [ 0.000000] #36 [00023f5780 - 00023f5828] BOOTMEM > [ 0.000000] #37 [00023f5840 - 00023f58a8] BOOTMEM > [ 0.000000] #38 [00023f58c0 - 00023f98c0] BOOTMEM > [ 0.000000] #39 [000240e000 - 000248e000] BOOTMEM > [ 0.000000] #40 [000248e000 - 00024ce000] BOOTMEM > [ 0.000000] #41 [000260e000 - 000300ce80] BOOTMEM > [ 0.000000] Initializing HighMem for node 0 (000377fe:0007ff30) > [ 0.000000] Memory: 2048908k/2096320k available (4928k kernel code, > 46960k reserved, 2336k data, 684k init, 1187016k highmem) > [ 0.000000] virtual kernel memory layout: > [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) > [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) > [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) > [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) > [ 0.000000] .init : 0xc0819000 - 0xc08c4000 ( 684 kB) > [ 0.000000] .data : 0xc05d030e - 0xc0818668 (2336 kB) > [ 0.000000] .text : 0xc0100000 - 0xc05d030e (4928 kB) > [ 0.000000] Checking if this processor honours the WP bit even in > supervisor mode...Ok. > [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, > CPUs=2, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. > [ 0.000000] RCU-based detection of stalled CPUs is disabled. > [ 0.000000] Verbose stalled-CPUs detection is disabled. > [ 0.000000] NR_IRQS:2304 nr_irqs:512 > [ 0.000000] Console: colour VGA+ 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] Fast TSC calibration using PIT > [ 0.000000] Detected 1695.223 MHz processor. > [ 0.004009] Calibrating delay loop (skipped), value calculated using > timer frequency.. 3390.44 BogoMIPS (lpj=6780892) > [ 0.004020] pid_max: default: 32768 minimum: 301 > [ 0.004061] Security Framework initialized > [ 0.004102] AppArmor: AppArmor initialized > [ 0.004107] Yama: becoming mindful. > [ 0.004224] Mount-cache hash table entries: 512 > [ 0.004517] Initializing cgroup subsys ns > [ 0.004527] Initializing cgroup subsys cpuacct > [ 0.004537] Initializing cgroup subsys memory > [ 0.004558] Initializing cgroup subsys devices > [ 0.004563] Initializing cgroup subsys freezer > [ 0.004569] Initializing cgroup subsys net_cls > [ 0.004626] CPU0: Hyper-Threading is disabled > [ 0.004633] mce: CPU supports 4 MCE banks > [ 0.004653] CPU0: Thermal monitoring enabled (TM1) > [ 0.004672] Performance Events: Netburst events, Netburst P4/Xeon PMU > driver. > [ 0.004694] ... version: 0 > [ 0.004699] ... bit width: 40 > [ 0.004703] ... generic registers: 18 > [ 0.004708] ... value mask: 000000ffffffffff > [ 0.004713] ... max period: 0000007fffffffff > [ 0.004718] ... fixed-purpose events: 0 > [ 0.004722] ... event mask: 000000000003ffff > [ 0.009077] SMP alternatives: switching to UP code > [ 0.028085] ACPI: Core revision 20100428 > [ 0.037427] ftrace: converting mcount calls to 0f 1f 44 00 00 > [ 0.037438] ftrace: allocating 21758 entries in 43 pages > [ 0.040147] Enabling APIC mode: Flat. Using 1 I/O APICs > [ 0.041291] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.083717] CPU0: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02 > [ 0.084000] Brought up 1 CPUs > [ 0.084000] Total of 1 processors activated (3390.44 BogoMIPS). > [ 0.084000] devtmpfs: initialized > [ 0.084039] regulator: core version 0.5 > [ 0.084097] Time: 8:59:29 Date: 11/26/10 > [ 0.084194] NET: Registered protocol family 16 > [ 0.084450] EISA bus registered > [ 0.084474] ACPI: bus type pci registered > [ 0.084685] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 > [ 0.084691] PCI: Using configuration type 1 for base access > [ 0.086778] bio: create slab <bio-0> at 0 > [ 0.088355] ACPI: EC: Look up EC in DSDT > [ 0.090682] ACPI: Executed 1 blocks of module-level executable AML > code > [ 0.098420] ACPI: Interpreter enabled > [ 0.098429] ACPI: (supports S0 S1 S4 S5) > [ 0.098469] ACPI: Using IOAPIC for interrupt routing > [ 0.113378] ACPI Warning: Incorrect checksum in table [OEMB] - 0xA3, > should be 0x95 (20100428/tbutils-314) > [ 0.113584] ACPI: No dock devices found. > [ 0.113594] PCI: Ignoring host bridge windows from ACPI; if > necessary, use "pci=use_crs" and report a bug > [ 0.113840] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > [ 0.114289] pci_root PNP0A03:00: host bridge window [io > 0x0000-0x0cf7] (ignored) > [ 0.114296] pci_root PNP0A03:00: host bridge window [io > 0x0d00-0xffff] (ignored) > [ 0.114302] pci_root PNP0A03:00: host bridge window [mem > 0x000a0000-0x000bffff] (ignored) > [ 0.114308] pci_root PNP0A03:00: host bridge window [mem > 0x80000000-0xffffffff] (ignored) > [ 0.114352] pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff > pref] > [ 0.114792] pci 0000:00:01.0: supports D1 > [ 0.114847] pci 0000:00:09.0: reg 10: [io 0xb800-0xb8ff] > [ 0.114860] pci 0000:00:09.0: reg 14: [mem 0xfebff400-0xfebff4ff] > [ 0.114919] pci 0000:00:09.0: supports D1 D2 > [ 0.114923] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold > [ 0.114932] pci 0000:00:09.0: PME# disabled > [ 0.114976] pci 0000:00:0a.0: reg 10: [io 0xbc00-0xbc3f] > [ 0.115040] pci 0000:00:0a.0: supports D2 > [ 0.115073] pci 0000:00:0b.0: reg 10: [mem 0xfebfc000-0xfebfdfff] > [ 0.115157] pci 0000:00:0c.0: reg 10: [mem 0xfebe0000-0xfebeffff] > [ 0.115169] pci 0000:00:0c.0: reg 14: [io 0xc000-0xc007] > [ 0.115227] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold > [ 0.115235] pci 0000:00:0c.0: PME# disabled > [ 0.115284] pci 0000:00:0f.0: reg 10: [io 0xec00-0xec07] > [ 0.115296] pci 0000:00:0f.0: reg 14: [io 0xe800-0xe803] > [ 0.115307] pci 0000:00:0f.0: reg 18: [io 0xe400-0xe407] > [ 0.115318] pci 0000:00:0f.0: reg 1c: [io 0xe000-0xe003] > [ 0.115330] pci 0000:00:0f.0: reg 20: [io 0xdc00-0xdc0f] > [ 0.115341] pci 0000:00:0f.0: reg 24: [io 0xd800-0xd8ff] > [ 0.115439] pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f] > [ 0.115562] pci 0000:00:10.0: reg 20: [io 0xc400-0xc41f] > [ 0.115603] pci 0000:00:10.0: supports D1 D2 > [ 0.115607] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot > D3cold > [ 0.115616] pci 0000:00:10.0: PME# disabled > [ 0.115683] pci 0000:00:10.1: reg 20: [io 0xc800-0xc81f] > [ 0.115723] pci 0000:00:10.1: supports D1 D2 > [ 0.115727] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot > D3cold > [ 0.115736] pci 0000:00:10.1: PME# disabled > [ 0.115802] pci 0000:00:10.2: reg 20: [io 0xcc00-0xcc1f] > [ 0.115842] pci 0000:00:10.2: supports D1 D2 > [ 0.115846] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot > D3cold > [ 0.115855] pci 0000:00:10.2: PME# disabled > [ 0.115923] pci 0000:00:10.3: reg 20: [io 0xd000-0xd01f] > [ 0.115962] pci 0000:00:10.3: supports D1 D2 > [ 0.115967] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot > D3cold > [ 0.115975] pci 0000:00:10.3: PME# disabled > [ 0.116042] pci 0000:00:10.4: reg 10: [mem 0xfebff800-0xfebff8ff] > [ 0.116105] pci 0000:00:10.4: supports D1 D2 > [ 0.116110] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot > D3cold > [ 0.116118] pci 0000:00:10.4: PME# disabled > [ 0.116209] HPET not enabled in BIOS. You might try hpet=force boot > option > [ 0.116291] pci 0000:00:12.0: reg 10: [io 0xd400-0xd4ff] > [ 0.116302] pci 0000:00:12.0: reg 14: [mem 0xfebffc00-0xfebffcff] > [ 0.116362] pci 0000:00:12.0: supports D1 D2 > [ 0.116367] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot > D3cold > [ 0.116375] pci 0000:00:12.0: PME# disabled > [ 0.116482] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] > [ 0.116493] pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff > pref] > [ 0.116525] pci 0000:01:00.0: reg 30: [mem 0xfeaf0000-0xfeafffff > pref] > [ 0.116607] pci 0000:00:01.0: PCI bridge to [bus 01-01] > [ 0.116615] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] > (disabled) > [ 0.116625] pci 0000:00:01.0: bridge window [mem > 0xfca00000-0xfeafffff] > [ 0.116634] pci 0000:00:01.0: bridge window [mem > 0xe7f00000-0xf7efffff pref] > [ 0.116648] pci_bus 0000:00: on NUMA node 0 > [ 0.116660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.132141] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 > 15) > [ 0.132341] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 > 15) > [ 0.132530] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 > 15) > [ 0.132719] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 14 > 15) > [ 0.132908] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 > 15) *0, disabled. > [ 0.133099] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 > 15) *0, disabled. > [ 0.133299] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 > 15) *0, disabled. > [ 0.133487] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 > 15) *0, disabled. > [ 0.133569] HEST: Table is not found! > [ 0.133767] vgaarb: device added: PCI:0000:01:00.0,decodes=io > +mem,owns=io+mem,locks=none > [ 0.133773] vgaarb: loaded > [ 0.134117] SCSI subsystem initialized > [ 0.134256] libata version 3.00 loaded. > [ 0.134394] usbcore: registered new interface driver usbfs > [ 0.134421] usbcore: registered new interface driver hub > [ 0.134489] usbcore: registered new device driver usb > [ 0.134825] ACPI: WMI: Mapper loaded > [ 0.134832] PCI: Using ACPI for IRQ routing > [ 0.134841] PCI: pci_cache_line_size set to 64 bytes > [ 0.134983] reserve RAM buffer: 000000000009fc00 - 000000000009ffff > [ 0.134990] reserve RAM buffer: 000000007ff30000 - 000000007fffffff > [ 0.135214] NetLabel: Initializing > [ 0.135220] NetLabel: domain hash size = 128 > [ 0.135223] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.135249] NetLabel: unlabeled traffic allowed by default > [ 0.135372] Switching to clocksource tsc > [ 0.151916] AppArmor: AppArmor Filesystem Enabled > [ 0.151954] pnp: PnP ACPI init > [ 0.151997] ACPI: bus type pnp registered > [ 0.160017] pnp: PnP ACPI: found 13 devices > [ 0.160024] ACPI: ACPI bus type pnp unregistered > [ 0.160032] PnPBIOS: Disabled by ACPI PNP > [ 0.160064] system 00:08: [io 0x0295-0x0296] has been reserved > [ 0.160072] system 00:08: [io 0x03e0-0x03e7] has been reserved > [ 0.160078] system 00:08: [io 0x04d0-0x04d1] has been reserved > [ 0.160084] system 00:08: [io 0x0800-0x087f] has been reserved > [ 0.160090] system 00:08: [io 0x0400-0x041f] has been reserved > [ 0.160105] system 00:09: [mem 0xfec80000-0xfec800ff] has been > reserved > [ 0.160113] system 00:09: [mem 0xfec00000-0xfec00fff] could not be > reserved > [ 0.160119] system 00:09: [mem 0xfee00000-0xfee00fff] has been > reserved > [ 0.160126] system 00:09: [mem 0xfff80000-0xffffffff] could not be > reserved > [ 0.160139] system 00:0c: [mem 0x00000000-0x0009ffff] could not be > reserved > [ 0.160146] system 00:0c: [mem 0x000c0000-0x000dffff] could not be > reserved > [ 0.160153] system 00:0c: [mem 0x000e0000-0x000fffff] could not be > reserved > [ 0.160159] system 00:0c: [mem 0x00100000-0x7fffffff] could not be > reserved > [ 0.197944] pci 0000:00:01.0: PCI bridge to [bus 01-01] > [ 0.197951] pci 0000:00:01.0: bridge window [io disabled] > [ 0.197963] pci 0000:00:01.0: bridge window [mem > 0xfca00000-0xfeafffff] > [ 0.197972] pci 0000:00:01.0: bridge window [mem > 0xe7f00000-0xf7efffff pref] > [ 0.198003] pci 0000:00:01.0: setting latency timer to 64 > [ 0.198013] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] > [ 0.198018] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] > [ 0.198024] pci_bus 0000:01: resource 1 [mem 0xfca00000-0xfeafffff] > [ 0.198030] pci_bus 0000:01: resource 2 [mem 0xe7f00000-0xf7efffff > pref] > [ 0.198109] NET: Registered protocol family 2 > [ 0.198239] IP route cache hash table entries: 32768 (order: 5, > 131072 bytes) > [ 0.198805] TCP established hash table entries: 131072 (order: 8, > 1048576 bytes) > [ 0.200151] TCP bind hash table entries: 65536 (order: 7, 524288 > bytes) > [ 0.200899] TCP: Hash tables configured (established 131072 bind > 65536) > [ 0.200906] TCP reno registered > [ 0.200919] UDP hash table entries: 512 (order: 2, 16384 bytes) > [ 0.200944] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) > [ 0.201165] NET: Registered protocol family 1 > [ 0.201220] pci 0000:00:01.0: disabling DAC on VIA PCI bridge > [ 0.201373] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert > Message > [ 0.201402] pci 0000:01:00.0: Boot video device > [ 0.201409] PCI: CLS 32 bytes, default 64 > [ 0.201725] cpufreq-nforce2: No nForce2 chipset. > [ 0.201793] Scanning for low memory corruption every 60 seconds > [ 0.202042] audit: initializing netlink socket (disabled) > [ 0.202067] type=2000 audit(1290761969.200:1): initialized > [ 0.218113] Trying to unpack rootfs image as initramfs... > [ 0.237237] highmem bounce pool size: 64 pages > [ 0.237252] HugeTLB registered 4 MB page size, pre-allocated 0 pages > [ 0.244817] VFS: Disk quotas dquot_6.5.2 > [ 0.244998] Dquot-cache hash table entries: 1024 (order 0, 4096 > bytes) > [ 0.246420] fuse init (API version 7.14) > [ 0.246656] msgmni has been set to 1683 > [ 0.253546] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 253) > [ 0.253555] io scheduler noop registered > [ 0.253559] io scheduler deadline registered > [ 0.253598] io scheduler cfq registered (default) > [ 0.253873] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 0.253919] pciehp: PCI Express Hot Plug Controller Driver version: > 0.4 > [ 0.254310] input: Power Button > as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 > [ 0.254324] ACPI: Power Button [PWRB] > [ 0.254415] input: Power Button > as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > [ 0.254423] ACPI: Power Button [PWRF] > [ 0.254763] ACPI: acpi_idle registered with cpuidle > [ 0.260226] ERST: Table is not found! > [ 0.264754] isapnp: Scanning for PnP cards... > [ 0.270593] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.270744] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 0.271506] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 0.278591] brd: module loaded > [ 0.279703] loop: module loaded > [ 0.280258] alloc irq_desc for 20 on node -1 > [ 0.280265] alloc kstat_irqs on node -1 > [ 0.280281] pata_acpi 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) > -> IRQ 20 > [ 0.280370] pata_acpi 0000:00:0f.1: PCI INT A disabled > [ 0.329151] Fixed MDIO Bus: probed > [ 0.329236] PPP generic driver version 2.4.2 > [ 0.329391] tun: Universal TUN/TAP device driver, 1.6 > [ 0.329396] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> > [ 0.329595] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) > Driver > [ 0.329654] alloc irq_desc for 21 on node -1 > [ 0.329659] alloc kstat_irqs on node -1 > [ 0.329675] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) > -> IRQ 21 > [ 0.329709] ehci_hcd 0000:00:10.4: EHCI Host Controller > [ 0.329820] ehci_hcd 0000:00:10.4: new USB bus registered, assigned > bus number 1 > [ 0.329925] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebff800 > [ 0.340939] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 > [ 0.341289] hub 1-0:1.0: USB hub found > [ 0.341301] hub 1-0:1.0: 8 ports detected > [ 0.341449] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 0.341487] uhci_hcd: USB Universal Host Controller Interface driver > [ 0.341579] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) > -> IRQ 21 > [ 0.341597] uhci_hcd 0000:00:10.0: UHCI Host Controller > [ 0.341710] uhci_hcd 0000:00:10.0: new USB bus registered, assigned > bus number 2 > [ 0.341752] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c400 > [ 0.342036] hub 2-0:1.0: USB hub found > [ 0.342048] hub 2-0:1.0: 2 ports detected > [ 0.342172] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) > -> IRQ 21 > [ 0.342188] uhci_hcd 0000:00:10.1: UHCI Host Controller > [ 0.342288] uhci_hcd 0000:00:10.1: new USB bus registered, assigned > bus number 3 > [ 0.342327] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c800 > [ 0.342603] hub 3-0:1.0: USB hub found > [ 0.342615] hub 3-0:1.0: 2 ports detected > [ 0.342745] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) > -> IRQ 21 > [ 0.342761] uhci_hcd 0000:00:10.2: UHCI Host Controller > [ 0.342867] uhci_hcd 0000:00:10.2: new USB bus registered, assigned > bus number 4 > [ 0.342908] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000cc00 > [ 0.343201] hub 4-0:1.0: USB hub found > [ 0.343213] hub 4-0:1.0: 2 ports detected > [ 0.343342] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) > -> IRQ 21 > [ 0.343357] uhci_hcd 0000:00:10.3: UHCI Host Controller > [ 0.343457] uhci_hcd 0000:00:10.3: new USB bus registered, assigned > bus number 5 > [ 0.343495] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d000 > [ 0.343766] hub 5-0:1.0: USB hub found > [ 0.343777] hub 5-0:1.0: 2 ports detected > [ 0.344008] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 > [ 0.344014] PNP: PS/2 appears to have AUX port disabled, if this is > incorrect please boot with i8042.nopnp > [ 0.344264] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 0.344518] mice: PS/2 mouse device common for all mice > [ 0.344827] rtc_cmos 00:02: RTC can wake from S4 > [ 0.344924] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 > [ 0.344991] rtc0: alarms up to one year, y3k, 114 bytes nvram > [ 0.345252] device-mapper: uevent: version 1.0.3 > [ 0.348880] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) > initialised: dm-devel@xxxxxxxxxx > [ 0.355518] device-mapper: multipath: version 1.1.1 loaded > [ 0.355528] device-mapper: multipath round-robin: version 1.0.0 > loaded > [ 0.355924] EISA: Probing bus 0 at eisa.0 > [ 0.355974] EISA: Detected 0 cards. > [ 0.360812] cpuidle: using governor ladder > [ 0.360819] cpuidle: using governor menu > [ 0.361565] TCP cubic registered > [ 0.361879] NET: Registered protocol family 10 > [ 0.362652] lo: Disabled Privacy Extensions > [ 0.363131] NET: Registered protocol family 17 > [ 0.363249] Using IPI No-Shortcut mode > [ 0.363476] PM: Resume from disk failed. > [ 0.363513] registered taskstats version 1 > [ 0.363913] Magic number: 2:275:979 > [ 0.364062] rtc_cmos 00:02: setting system clock to 2010-11-26 > 08:59:29 UTC (1290761969) > [ 0.364071] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found > [ 0.364075] EDD information not available. > [ 0.369008] input: AT Translated Set 2 keyboard > as /devices/platform/i8042/serio0/input/input2 > [ 0.948904] isapnp: No Plug & Play device found > [ 1.004753] usb 1-4: new high speed USB device using ehci_hcd and > address 4 > [ 1.181425] Freeing initrd memory: 10512k freed > [ 1.195852] Freeing unused kernel memory: 684k freed > [ 1.197022] Write protecting the kernel text: 4932k > [ 1.197090] Write protecting the kernel read-only data: 1976k > [ 1.251206] udev[63]: starting version 163 > [ 1.320116] usb 1-7: new high speed USB device using ehci_hcd and > address 6 > [ 1.773567] Floppy drive(s): fd0 is 1.44M > [ 1.798520] sata_via 0000:00:0f.0: version 2.6 > [ 1.798553] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) > -> IRQ 20 > [ 1.798633] sata_via 0000:00:0f.0: routed to hard irq line 10 > [ 1.800759] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, > 2004) > [ 1.808071] usb 2-1: new full speed USB device using uhci_hcd and > address 2 > [ 1.822267] scsi0 : sata_via > [ 1.826678] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald > Becker > [ 1.838931] FDC 0 is a post-1991 82077 > [ 1.842175] scsi1 : sata_via > [ 1.842307] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma > 0xdc00 irq 20 > [ 1.842314] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma > 0xdc08 irq 20 > [ 1.842446] 8139cp 0000:00:09.0: This (id 10ec:8139 rev 10) is not an > 8139C+ compatible chip, use 8139too > [ 1.842507] pata_via 0000:00:0f.1: version 0.3.4 > [ 1.842536] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) > -> IRQ 20 > [ 1.862368] scsi2 : pata_via > [ 1.876158] scsi3 : pata_via > [ 1.880620] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 > irq 14 > [ 1.880628] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 > irq 15 > [ 1.889920] alloc irq_desc for 23 on node -1 > [ 1.889928] alloc kstat_irqs on node -1 > [ 1.889944] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) > -> IRQ 23 > [ 1.891012] eth0: VIA Rhine II at 0xfebffc00, 00:0b:6a:a2:89:18, IRQ > 23. > [ 1.891730] eth0: MII PHY found at address 1, status 0x7849 > advertising 05e1 Link 0000. > [ 1.892531] alloc irq_desc for 19 on node -1 > [ 1.892538] alloc kstat_irqs on node -1 > [ 1.892553] b43-pci-bridge 0000:00:0b.0: PCI INT A -> GSI 19 (level, > low) -> IRQ 19 > [ 1.892619] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor > 0x4243) > [ 1.892629] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, > vendor 0x4243) > [ 1.892639] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor > 0x4243) > [ 1.892649] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor > 0x4243) > [ 1.892658] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor > 0x4243) > [ 1.911748] Initializing USB Mass Storage driver... > [ 1.920509] ssb: Sonics Silicon Backplane found on PCI device > 0000:00:0b.0 > [ 1.932580] scsi4 : usb-storage 1-7:1.0 > [ 1.941685] usbcore: registered new interface driver usb-storage > [ 1.941694] USB Mass Storage support registered. > [ 2.044084] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 2.234323] ata1.00: ATA-8: ST3500418AS, CC34, max UDMA/133 > [ 2.234333] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth > 0/32) > [ 2.276026] usb 3-1: new full speed USB device using uhci_hcd and > address 2 > [ 2.290345] ata1.00: configured for UDMA/133 > [ 2.290561] scsi 0:0:0:0: Direct-Access ATA ST3500418AS > CC34 PQ: 0 ANSI: 5 > [ 2.290941] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 2.291649] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 > GB/465 GiB) > [ 2.291769] sd 0:0:0:0: [sda] Write Protect is off > [ 2.291776] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 2.291825] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 2.292233] sda: sda1 sda2 < sda5 > > [ 2.324420] sd 0:0:0:0: [sda] Attached SCSI disk > [ 2.492036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 2.656394] ata2.00: ATA-6: ST380817AS, 3.42, max UDMA/133 > [ 2.656401] ata2.00: 156301488 sectors, multi 16: LBA48 NCQ (not > used) > [ 2.672414] ata2.00: configured for UDMA/133 > [ 2.672640] scsi 1:0:0:0: Direct-Access ATA ST380817AS > 3.42 PQ: 0 ANSI: 5 > [ 2.673006] sd 1:0:0:0: Attached scsi generic sg1 type 0 > [ 2.673833] sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: > (80.0 GB/74.5 GiB) > [ 2.673952] sd 1:0:0:0: [sdb] Write Protect is off > [ 2.673959] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > [ 2.674008] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 2.674382] sdb: sdb1 sdb2 > [ 2.692229] sd 1:0:0:0: [sdb] Attached SCSI disk > [ 2.700032] usb 4-1: new low speed USB device using uhci_hcd and > address 2 > [ 2.844459] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4040B, A300, max > UDMA/33 > [ 2.844532] ata4.01: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0015, max > UDMA/33 > [ 2.860428] ata4.00: configured for UDMA/33 > [ 2.875690] usbcore: registered new interface driver hiddev > [ 2.876375] ata4.01: configured for UDMA/33 > [ 2.881375] input: Plantronics Plantronics Headset > as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.3/input/input3 > [ 2.881928] generic-usb 0003:047F:0CA1.0001: input,hidraw0: USB HID > v1.00 Device [Plantronics Plantronics Headset] on > usb-0000:00:10.0-1/input3 > [ 2.891585] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4040B > A300 PQ: 0 ANSI: 5 > [ 2.896097] sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw > xa/form2 cdda tray > [ 2.896106] Uniform CD-ROM driver Revision: 3.20 > [ 2.896430] sr 3:0:0:0: Attached scsi CD-ROM sr0 > [ 2.896603] sr 3:0:0:0: Attached scsi generic sg2 type 5 > [ 2.899393] input: HID ffc0:0001 > as /devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/input/input4 > [ 2.900469] generic-usb 0003:FFC0:0001.0002: input,hidraw1: USB HID > v1.10 Mouse [HID ffc0:0001] on usb-0000:00:10.2-1/input0 > [ 2.901035] usbcore: registered new interface driver usbhid > [ 2.901045] usbhid: USB HID core driver > [ 2.903308] scsi 3:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8162B > 0015 PQ: 0 ANSI: 5 > [ 2.919720] sr1: scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray > [ 2.920964] sr 3:0:1:0: Attached scsi CD-ROM sr1 > [ 2.921475] sr 3:0:1:0: Attached scsi generic sg3 type 5 > [ 2.979306] scsi 4:0:0:0: Direct-Access Generic USB SD Reader > 1.00 PQ: 0 ANSI: 0 > [ 2.984938] scsi 4:0:0:1: Direct-Access Generic USB CF Reader > 1.01 PQ: 0 ANSI: 0 > [ 2.985616] scsi 4:0:0:2: Direct-Access Generic USB SM Reader > 1.02 PQ: 0 ANSI: 0 > [ 2.987226] scsi 4:0:0:3: Direct-Access Generic USB MS Reader > 1.03 PQ: 0 ANSI: 0 > [ 2.990469] sd 4:0:0:0: [sdc] Attached SCSI removable disk > [ 3.002305] sd 4:0:0:0: Attached scsi generic sg4 type 0 > [ 3.008526] sd 4:0:0:1: [sdd] Attached SCSI removable disk > [ 3.011463] sd 4:0:0:1: Attached scsi generic sg5 type 0 > [ 3.013704] sd 4:0:0:2: [sde] Attached SCSI removable disk > [ 3.019434] sd 4:0:0:2: Attached scsi generic sg6 type 0 > [ 3.019976] sd 4:0:0:3: Attached scsi generic sg7 type 0 > [ 3.021456] sd 4:0:0:3: [sdf] Attached SCSI removable disk > [ 3.036521] 8139too: 8139too Fast Ethernet driver 0.9.28 > [ 3.036594] alloc irq_desc for 17 on node -1 > [ 3.036600] alloc kstat_irqs on node -1 > [ 3.036616] 8139too 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> > IRQ 17 > [ 3.038186] 8139too 0000:00:09.0: eth1: RealTek RTL8139 at 0xb800, > 00:02:44:37:94:06, IRQ 17 > [ 3.096144] usb 5-2: new full speed USB device using uhci_hcd and > address 2 > [ 3.423803] EXT4-fs (sda1): mounted filesystem with ordered data > mode. Opts: (null) > [ 11.464833] Adding 6033404k swap on /dev/sda5. Priority:-1 extents:1 > across:6033404k > [ 11.640258] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro > [ 11.648944] udev[347]: starting version 163 > [ 11.848822] lp: driver loaded but no devices found > [ 12.284333] shpchp: Standard Hot Plug PCI Controller Driver version: > 0.4 > [ 12.510863] Linux agpgart interface v0.103 > [ 12.542230] type=1400 audit(1290758381.674:2): apparmor="STATUS" > operation="profile_load" name="/sbin/dhclient3" pid=460 > comm="apparmor_parser" > [ 12.543171] type=1400 audit(1290758381.674:3): apparmor="STATUS" > operation="profile_load" > name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=460 > comm="apparmor_parser" > [ 12.543687] type=1400 audit(1290758381.674:4): apparmor="STATUS" > operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" > pid=460 comm="apparmor_parser" > [ 12.678390] WARNING! power/level is deprecated; use power/control > instead > [ 12.745203] agpgart: Detected VIA PT880 chipset > [ 12.891651] parport_pc 00:06: reported by Plug and Play ACPI > [ 12.891785] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 > [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] > [ 13.020283] agpgart-via 0000:00:00.0: AGP aperture is 64M @ > 0xf8000000 > [ 13.136496] lp0: using parport0 (interrupt-driven). > [ 13.749280] cfg80211: Calling CRDA to update world regulatory domain > [ 13.749438] gameport gameport0: NS558 PnP Gameport is > pnp00:07/gameport0, io 0x200, speed 774kHz > [ 14.156396] ppdev: user-space parallel port driver > [ 14.166028] cfg80211: World regulatory domain updated: > [ 14.166039] (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp) > [ 14.166046] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 14.166053] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, > 2000 mBm) > [ 14.166059] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, > 2000 mBm) > [ 14.166065] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 14.166071] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 14.342222] [drm] Initialized drm 1.1.0 20060810 > [ 14.543343] b43-phy0: Broadcom 4306 WLAN found (core revision 5) > [ 15.007851] phy0: Selected rate control algorithm 'minstrel' > [ 15.009306] Registered led device: b43-phy0::tx > [ 15.009353] Registered led device: b43-phy0::rx > [ 15.009392] Registered led device: b43-phy0::radio > [ 15.009566] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: > FW13 ] > [ 15.009852] phy1: Selected rate control algorithm 'minstrel' > [ 15.011345] phy1: hwaddr 00:e0:4c:8d:ab:4b, RTL8187BvE V0 + > rtl8225z2, rfkill mask 2 > [ 15.048889] rtl8187: Customer ID is 0x00 > [ 15.050291] Registered led device: rtl8187-phy1::radio > [ 15.052352] Registered led device: rtl8187-phy1::tx > [ 15.052887] Registered led device: rtl8187-phy1::rx > [ 15.054631] rtl8187: wireless switch is on > [ 15.055206] usbcore: registered new interface driver rtl8187 > [ 15.241118] udev[367]: renamed network interface wlan1 to wlan3 > [ 15.378019] alloc irq_desc for 16 on node -1 > [ 15.378027] alloc kstat_irqs on node -1 > [ 15.378043] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> > IRQ 16 > [ 15.443374] [drm] nouveau 0000:01:00.0: Detected an NV10 generation > card (0x011000b2) > [ 15.443743] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image > from PRAMIN > [ 15.490461] [drm] nouveau 0000:01:00.0: ... appears to be valid > [ 15.490652] [drm] nouveau 0000:01:00.0: BMP BIOS found > [ 15.490657] [drm] nouveau 0000:01:00.0: BMP version 5.20 > [ 15.490663] [drm] nouveau 0000:01:00.0: Bios version 03.11.01.43 > [ 15.490670] [drm] nouveau 0000:01:00.0: Found Display Configuration > Block version 1.4 > [ 15.490675] [drm] nouveau 0000:01:00.0: No useful information in BIOS > output table; adding all possible outputs > [ 15.490680] [drm] nouveau 0000:01:00.0: Probing TV encoders on I2C > bus: 1 > [ 15.536605] usbcore: registered new interface driver snd-usb-audio > [ 15.559335] alloc irq_desc for 18 on node -1 > [ 15.559342] alloc kstat_irqs on node -1 > [ 15.559358] ENS1371 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> > IRQ 18 > [ 15.635068] eth1: link down > [ 15.635910] ADDRCONF(NETDEV_UP): eth1: link is not ready > [ 15.727655] type=1400 audit(1290758384.858:5): apparmor="STATUS" > operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" > pid=906 comm="apparmor_parser" > [ 15.783164] type=1400 audit(1290758384.914:6): apparmor="STATUS" > operation="profile_replace" name="/sbin/dhclient3" pid=912 > comm="apparmor_parser" > [ 15.784558] type=1400 audit(1290758384.918:7): apparmor="STATUS" > operation="profile_replace" > name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=912 > comm="apparmor_parser" > [ 15.785084] type=1400 audit(1290758384.918:8): apparmor="STATUS" > operation="profile_replace" > name="/usr/lib/connman/scripts/dhclient-script" pid=912 > comm="apparmor_parser" > [ 15.929691] [drm] nouveau 0000:01:00.0: Detected TV encoder: ch7006 > [ 15.929882] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at > offset 0xB74C > [ 15.929904] [drm] nouveau 0000:01:00.0: 0xB766: Failed parsing init > table opcode: INIT_CONFIGURE_PREINIT -19 > [ 15.929985] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at > offset 0xBE3A > [ 15.929996] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at > offset 0xB767 > [ 15.930020] [drm] nouveau 0000:01:00.0: 0xB7F9: Failed parsing init > table opcode: INIT_CONFIGURE_CLK -19 > [ 15.930094] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at > offset 0xBDE1 > [ 15.930108] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at > offset 0xB7FA > [ 15.930114] [drm] nouveau 0000:01:00.0: 0xB81E: Failed parsing init > table opcode: INIT_CONFIGURE_MEM -19 > [ 15.930189] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at > offset 0xB94E > [ 15.930214] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at > offset 0xB81F > [ 15.930245] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 7 at > offset 0xB8E9 > [ 15.930257] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM > [ 15.962512] type=1400 audit(1290758385.094:9): apparmor="STATUS" > operation="profile_load" name="/usr/bin/evince" pid=917 > comm="apparmor_parser" > [ 15.971296] [TTM] Zone kernel: Available graphics memory: 436544 > kiB. > [ 15.971304] [TTM] Zone highmem: Available graphics memory: 1030052 > kiB. > [ 15.971308] [TTM] Initializing pool allocator. > [ 15.971534] agpgart-via 0000:00:00.0: AGP 3.5 bridge > [ 15.971564] agpgart-via 0000:00:00.0: bridge is in legacy mode, > falling back to 2.x > [ 15.971575] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x > mode > [ 15.971697] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode > [ 15.971704] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) > [ 15.973169] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 > [ 15.975138] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: > initialised FIFO 0 > [ 15.975160] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 > [ 15.975173] [drm] nouveau 0000:01:00.0: Saving VGA fonts > [ 16.031949] type=1400 audit(1290758385.162:10): apparmor="STATUS" > operation="profile_load" name="/usr/bin/evince-previewer" pid=917 > comm="apparmor_parser" > [ 16.078981] type=1400 audit(1290758385.210:11): apparmor="STATUS" > operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=917 > comm="apparmor_parser" > [ 16.117521] b43-phy0: Loading firmware version 410.2160 (2007-05-26 > 15:32:10) > [ 16.149942] [drm] nouveau 0000:01:00.0: Probing TV encoders on I2C > bus: 1 > [ 16.150869] [drm] nouveau 0000:01:00.0: Detected TV encoder: ch7006 > [ 16.190965] ch7006 1-0075: Detected version ID: 50 > [ 16.198806] [drm] nouveau 0000:01:00.0: Detected a VGA connector > [ 16.199348] [drm] nouveau 0000:01:00.0: Detected a TV connector > [ 16.210086] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 16.372589] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga > encoder (output 0) > [ 16.372599] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV > encoder (output 1) > [ 16.916856] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: > 0x49000, bo f47ec800 > [ 16.993377] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV > encoder (output 1) > [ 17.003573] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga > encoder (output 0) > [ 17.003581] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on > CRTC 0 using output @ > [ 17.012339] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV > encoder (output 1) > [ 17.012360] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV > encoder (output 1) > [ 17.023110] Console: switching to colour frame buffer device 180x56 > [ 17.027112] fb0: nouveaufb frame buffer device > [ 17.027117] drm: registered panic notifier > [ 17.032174] Slow work thread pool: Starting up > [ 17.032293] Slow work thread pool: Ready > [ 17.032313] [drm] Initialized nouveau 0.0.16 20090420 for > 0000:01:00.0 on minor 0 > [ 20.953556] ADDRCONF(NETDEV_UP): wlan3: link is not ready > [ 20.972974] eth0: link down > [ 20.973348] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 22.009359] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 > [ 22.010332] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: > initialised FIFO 1 > [ 29.783390] EXT4-fs (sda1): re-mounted. Opts: > errors=remount-ro,commit=0 > [ 35.526477] slamr: module license 'Smart Link Ltd.' taints kernel. > [ 35.526487] Disabling lock debugging due to kernel taint > [ 35.553152] slamr: SmartLink AMRMO modem. > [ 46.635240] wlan0: authenticate with 00:80:5a:28:6e:0e (try 1) > [ 46.636687] wlan0: authenticated > [ 46.638558] wlan0: associate with 00:80:5a:28:6e:0e (try 1) > [ 46.640566] wlan0: RX AssocResp from 00:80:5a:28:6e:0e (capab=0x431 > status=0 aid=1) > [ 46.640575] wlan0: associated > [ 46.642025] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 52.832089] ata4: lost interrupt (Status 0x58) > [ 52.832139] ata4: drained 24 bytes to clear DRQ. > [ 52.832155] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 > frozen > [ 52.832169] sr 3:0:0:0: CDB: Xdread, Read track info: 52 01 00 00 00 > 01 00 00 20 00 > [ 52.832197] ata4.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 > dma 16416 in > [ 52.832200] res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask > 0x4 (timeout) > [ 52.832206] ata4.00: status: { DRDY } > [ 52.888083] ata4: soft resetting link > [ 53.044273] ata4.01: NODEV after polling detection > [ 53.044281] ata4.01: revalidation failed (errno=-2) > [ 57.640046] wlan0: no IPv6 routers present > [ 58.044094] ata4: soft resetting link > [ 58.200215] ata4.01: NODEV after polling detection > [ 58.200223] ata4.01: revalidation failed (errno=-2) > [ 59.784060] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) > on phy1 > [ 60.505317] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1) > [ 60.507426] wlan3: authenticated > [ 60.577290] wlan3: associate with 00:80:5a:28:6e:0e (try 1) > [ 60.653917] wlan3: RX AssocResp from 00:80:5a:28:6e:0e (capab=0x431 > status=0 aid=2) > [ 60.653928] wlan3: associated > [ 60.729725] ADDRCONF(NETDEV_CHANGE): wlan3: link becomes ready > [ 63.200071] ata4: soft resetting link > [ 63.356223] ata4.01: NODEV after polling detection > [ 63.356231] ata4.01: revalidation failed (errno=-2) > [ 63.356239] ata4.01: disabled > [ 63.356250] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x40) > [ 63.356255] ata4.00: revalidation failed (errno=-5) > [ 68.356063] ata4: soft resetting link > [ 68.536373] ata4.00: configured for UDMA/33 > [ 68.538669] ata4: EH complete > [ 70.896012] wlan3: no IPv6 routers present > [ 71.461218] ISO 9660 Extensions: Microsoft Joliet Level 1 > [ 71.547826] ISOFS: changing to secondary root > [ 72.599097] ISO 9660 Extensions: Microsoft Joliet Level 1 > [ 72.628085] ISOFS: changing to secondary root > [ 87.332052] No probe response from AP 00:80:5a:28:6e:0e after 500ms, > disconnecting. > [ 107.382765] wlan0: authenticate with 00:80:5a:28:6e:0e (try 1) > [ 107.580087] wlan0: authenticate with 00:80:5a:28:6e:0e (try 2) > [ 107.581529] wlan0: authenticated > [ 107.581907] wlan0: associate with 00:80:5a:28:6e:0e (try 1) > [ 107.598793] wlan0: RX AssocResp from 00:80:5a:28:6e:0e (capab=0x431 > status=0 aid=1) > [ 107.598802] wlan0: associated > [ 352.548031] No probe response from AP 00:80:5a:28:6e:0e after 500ms, > disconnecting. > [ 355.169335] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1) > [ 355.368041] wlan3: authenticate with 00:80:5a:28:6e:0e (try 2) > [ 355.568033] wlan3: authenticate with 00:80:5a:28:6e:0e (try 3) > [ 355.768032] wlan3: authentication with 00:80:5a:28:6e:0e timed out > [ 367.465326] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 367.664029] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 367.864473] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 368.064036] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 370.573440] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 370.772039] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 370.972035] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 371.172058] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 382.889436] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 383.088034] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 383.288040] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 383.488242] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 390.564040] No probe response from AP 00:80:5a:28:6e:0e after 500ms, > disconnecting. > [ 390.564883] cfg80211: All devices are disconnected, going to restore > regulatory settings > [ 390.564894] cfg80211: Restoring regulatory settings > [ 390.564901] cfg80211: Calling CRDA to update world regulatory domain > [ 390.583824] cfg80211: World regulatory domain updated: > [ 390.583833] (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp) > [ 390.583841] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 390.583847] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, > 2000 mBm) > [ 390.583853] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, > 2000 mBm) > [ 390.583859] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 390.583865] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, > 2000 mBm) > [ 391.970389] wlan0: authenticate with 00:80:5a:28:6e:0e (try 1) > [ 392.169050] wlan0: authenticate with 00:80:5a:28:6e:0e (try 2) > [ 392.368055] wlan0: authenticate with 00:80:5a:28:6e:0e (try 3) > [ 392.568068] wlan0: authentication with 00:80:5a:28:6e:0e timed out > [ 395.213284] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 395.412171] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 395.612036] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 395.812040] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 407.601244] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 407.800044] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 408.000047] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 408.200048] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 409.563599] wlan0: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 409.760062] wlan0: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 409.960050] wlan0: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 410.160032] wlan0: direct probe to 00:80:5a:28:6e:0e timed out > [ 420.011084] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 420.208087] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 420.409443] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 420.609257] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 427.180006] wlan0: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 427.380081] wlan0: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 427.580178] wlan0: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 427.780082] wlan0: direct probe to 00:80:5a:28:6e:0e timed out > [ 443.466153] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 443.664080] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 443.864078] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 444.064071] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 451.115366] wlan0: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 451.312079] wlan0: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 451.512086] wlan0: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 451.712049] wlan0: direct probe to 00:80:5a:28:6e:0e timed out > [ 455.842272] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 456.040070] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 456.240646] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 456.441885] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 468.281329] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 468.480313] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 468.680101] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 468.880113] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 480.705338] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 480.904081] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 481.104110] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 481.304090] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 484.266996] wlan0: authenticate with 00:24:d1:16:a7:25 (try 1) > [ 484.269012] wlan0: authenticated > [ 484.269217] wlan0: associate with 00:24:d1:16:a7:25 (try 1) > [ 484.271483] wlan0: RX AssocResp from 00:24:d1:16:a7:25 (capab=0x411 > status=0 aid=1) > [ 484.271492] wlan0: associated > [ 493.116077] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 493.316070] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 493.516076] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 493.716081] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 499.897864] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > [ 501.044340] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF > controllerless PCI modem (PCI-14f1:1033-1092:0ac8) > [ 501.765444] hcfpcihw 0000:00:0c.0: PCI INT A disabled > [ 503.018257] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > [ 504.723050] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF > controllerless PCI modem (PCI-14f1:1033-1092:0ac8) > [ 505.215408] hcfpcihw 0000:00:0c.0: PCI INT A disabled > [ 506.805357] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > [ 508.263459] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF > controllerless PCI modem (PCI-14f1:1033-1092:0ac8) > [ 517.037333] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1) > [ 517.043827] wlan3: authenticated > [ 517.113347] wlan3: associate with 00:80:5a:28:6e:0e (try 1) > [ 517.186862] wlan3: RX AssocResp from 00:80:5a:28:6e:0e (capab=0x431 > status=0 aid=2) > [ 517.186873] wlan3: associated > [ 924.781371] hcfpcihw 0000:00:0c.0: PCI INT A disabled > [ 960.815473] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > [ 961.595176] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF > controllerless PCI modem (PCI-14f1:1033-1092:0ac8) > [ 961.851799] hcfpcihw 0000:00:0c.0: PCI INT A disabled > [ 963.182548] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > [ 963.882184] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF > controllerless PCI modem (PCI-14f1:1033-1092:0ac8) > [ 984.612035] No probe response from AP 00:80:5a:28:6e:0e after 500ms, > disconnecting. > [ 987.282016] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1) > [ 987.480047] wlan3: authenticate with 00:80:5a:28:6e:0e (try 2) > [ 987.482227] wlan3: authenticated > [ 987.549248] wlan3: associate with 00:80:5a:28:6e:0e (try 1) > [ 987.619266] wlan3: RX AssocResp from 00:80:5a:28:6e:0e (capab=0x431 > status=0 aid=2) > [ 987.619277] wlan3: associated > [ 1052.580090] No probe response from AP 00:80:5a:28:6e:0e after 500ms, > disconnecting. > [ 1055.253290] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1) > [ 1055.452037] wlan3: authenticate with 00:80:5a:28:6e:0e (try 2) > [ 1055.652037] wlan3: authenticate with 00:80:5a:28:6e:0e (try 3) > [ 1055.852026] wlan3: authentication with 00:80:5a:28:6e:0e timed out > [ 1067.613318] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 1067.812078] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 1068.012064] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 1068.212074] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 1070.721360] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 1070.920045] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 1070.921785] wlan3: direct probe responded > [ 1070.921807] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1) > [ 1070.924439] wlan3: authenticated > [ 1070.997292] wlan3: associate with 00:80:5a:28:6e:0e (try 1) > [ 1071.067331] wlan3: RX AssocResp from 00:80:5a:28:6e:0e (capab=0x431 > status=0 aid=2) > [ 1071.067343] wlan3: associated > [ 1135.524026] No probe response from AP 00:80:5a:28:6e:0e after 500ms, > disconnecting. > [ 1138.197299] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1) > [ 1138.198807] wlan3: authenticated > [ 1138.269275] wlan3: associate with 00:80:5a:28:6e:0e (try 1) > [ 1138.338882] wlan3: RX AssocResp from 00:80:5a:28:6e:0e (capab=0x431 > status=0 aid=2) > [ 1138.338891] wlan3: associated > [ 1168.200236] show_signal_msg: 9 callbacks suppressed > [ 1168.200249] gs[6547]: segfault at 8 ip 00272c67 sp bfc225f0 error 4 > in libtiff.so.4.3.3[26e000+57000] > [ 1171.556051] No probe response from AP 00:80:5a:28:6e:0e after 500ms, > disconnecting. > [ 1174.225265] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1) > [ 1174.424037] wlan3: authenticate with 00:80:5a:28:6e:0e (try 2) > [ 1174.624033] wlan3: authenticate with 00:80:5a:28:6e:0e (try 3) > [ 1174.824035] wlan3: authentication with 00:80:5a:28:6e:0e timed out > [ 1186.577240] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 1186.776038] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 1186.976070] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 1187.176028] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 1189.693350] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 1189.892051] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 1190.092031] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 1190.292042] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 1202.105706] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1) > [ 1202.107820] wlan3: authenticated > [ 1202.181282] wlan3: associate with 00:80:5a:28:6e:0e (try 1) > [ 1202.380044] wlan3: associate with 00:80:5a:28:6e:0e (try 2) > [ 1202.382344] wlan3: RX AssocResp from 00:80:5a:28:6e:0e (capab=0x431 > status=0 aid=2) > [ 1202.382352] wlan3: associated > [ 2303.485359] hcfpcihw 0000:00:0c.0: PCI INT A disabled > [ 2303.721466] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > [ 2304.334881] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF > controllerless PCI modem (PCI-14f1:1033-1092:0ac8) > [ 2306.230645] process `sysctl' is using deprecated sysctl (syscall) > net.ipv6.neigh.default.retrans_time; Use > net.ipv6.neigh.default.retrans_time_ms instead. > [ 2320.548027] No probe response from AP 00:80:5a:28:6e:0e after 500ms, > disconnecting. > [ 2323.214144] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1) > [ 2323.412034] wlan3: authenticate with 00:80:5a:28:6e:0e (try 2) > [ 2323.612028] wlan3: authenticate with 00:80:5a:28:6e:0e (try 3) > [ 2323.812027] wlan3: authentication with 00:80:5a:28:6e:0e timed out > [ 2335.581731] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 2335.780031] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 2335.980037] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 2336.180085] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 2338.705313] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 2338.904050] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 2339.104072] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 2339.304083] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 2351.109477] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 2351.308031] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 2351.508044] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 2351.708038] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 2363.485259] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 2363.684043] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 2363.884062] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 2364.084041] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 2375.853316] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 2376.052050] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 2376.252030] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 2376.452040] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 2388.245325] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 2388.444032] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 2388.644032] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 2388.844032] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 2405.629307] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 2405.828033] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 2406.028043] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 2406.228042] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 2417.997338] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 2418.196031] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 2418.396041] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 2418.596041] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 2430.385248] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 2430.584030] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 2430.784038] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 2430.984041] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 2442.801298] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 2443.000124] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 2443.200037] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 2443.400041] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 2455.169583] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1) > [ 2455.368073] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2) > [ 2455.568039] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3) > [ 2455.768028] wlan3: direct probe to 00:80:5a:28:6e:0e timed out > [ 3607.929090] hcfpcihw 0000:00:0c.0: PCI INT A disabled > [ 3646.336789] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > [ 3646.973085] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF > controllerless PCI modem (PCI-14f1:1033-1092:0ac8) > [ 3984.717732] hcfpcihw 0000:00:0c.0: PCI INT A disabled > [ 4021.495374] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > [ 4022.162141] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF > controllerless PCI modem (PCI-14f1:1033-1092:0ac8) > [ 4022.446913] hcfpcihw 0000:00:0c.0: PCI INT A disabled > [ 4023.825258] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) > -> IRQ 16 > [ 4024.632717] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF > controllerless PCI modem (PCI-14f1:1033-1092:0ac8) > > Module Size Used by > hcfpcihw 4979 0 > hcfpciserial 18627 1 hcfpcihw > hcfpciengine 945480 2 hcfpcihw,hcfpciserial > hcfpciosspec 58895 3 hcfpciserial,hcfpciengine > nls_utf8 1069 1 > isofs 30022 1 > binfmt_misc 6599 1 > slamr 420449 0 > ungrab_winmodem 1003 0 > ch7006 16545 1 > snd_ens1371 18782 2 > nouveau 516971 2 > snd_usb_audio 86704 2 > snd_ac97_codec 99227 1 snd_ens1371 > ac97_bus 1014 1 snd_ac97_codec > snd_pcm 71475 3 snd_ens1371,snd_ac97_codec,snd_usb_audio > arc4 1165 4 > snd_hwdep 5040 1 snd_usb_audio > snd_usbmidi_lib 17413 1 snd_usb_audio > snd_seq_midi 4588 0 > ttm 56633 1 nouveau > rtl8187 51470 0 > b43 168681 0 > snd_rawmidi 17783 3 snd_ens1371,snd_usbmidi_lib,snd_seq_midi > drm_kms_helper 30200 2 ch7006,nouveau > snd_seq_midi_event 6047 1 snd_seq_midi > mac80211 231541 2 rtl8187,b43 > snd_seq 47174 2 snd_seq_midi,snd_seq_midi_event > ppdev 5556 0 > snd_timer 19067 2 snd_pcm,snd_seq > snd_seq_device 5744 3 snd_seq_midi,snd_rawmidi,snd_seq > drm 168054 5 ch7006,nouveau,ttm,drm_kms_helper > ns558 3068 0 > cfg80211 144470 3 rtl8187,b43,mac80211 > parport_pc 26058 1 > eeprom_93cx6 1345 1 rtl8187 > gameport 9327 3 snd_ens1371,ns558 > i2c_viapro 5777 0 > via_agp 5322 1 > snd 49006 18 > snd_ens1371,snd_ac97_codec,snd_usb_audio,snd_pcm,snd_hwdep,snd_usbmidi_lib,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > i2c_algo_bit 5168 1 nouveau > soundcore 880 1 snd > led_class 2633 2 rtl8187,b43 > snd_page_alloc 7120 1 snd_pcm > shpchp 29886 0 > agpgart 32011 3 ttm,drm,via_agp > lp 7342 0 > parport 31492 3 ppdev,parport_pc,lp > 8139too 19581 0 > usbhid 36882 0 > hid 67742 1 usbhid > usb_storage 40172 0 > via_rhine 19038 0 > pata_via 7300 1 > 8139cp 16934 0 > sata_via 7344 2 > ssb 39288 1 b43 > floppy 54311 0 > mii 4425 3 8139too,via_rhine,8139cp > > >
