I follows the output of scanModem script of my system.
I don't get success with installing my fax on Ubuntu 10.10
Any help would be apreciated? Thanks in advance
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.35-22-generic
With this Subject Line cogent experts will be alerted, and useful case
names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in
YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for
dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
Internet Provider mail filters.
So in a day, also check the Archived responses at
http://www.linmodems.org
-------------------------- System information
----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.23
Linux version 2.6.35-22-generic (buildd@vernadsky) (gcc version 4.4.5
(Ubuntu/Linaro 4.4.4-14ubuntu5) ) #35-Ubuntu SMP Sat Oct 16 20:36:48 UTC
2010
scanModem update of: 2010_05_29
Distrib_ID=Ubuntu
DistribCodeName=maverick
AptRepositoryStem=http://es.archive.ubuntu.com/ubuntu/
The dkms driver upgrade utilities are installed,
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_atiixp_modem snd_via82xx_modem snd_intel8x0m slamr
slamrTest=
Attached USB devices are:
ID 06bd:2091 AGFA-Gevaert NV SnapScan e20
ID ffc0:0001
ID 0783:0006 C3PO LTC31v2
ID 047f:0ca1 Plantronics, Inc. USB DSP v4 Audio Interface
ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
ID 058f:1234 Alcor Micro Corp. Flash Drive
ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g
54Mbps Network Adapter
If a cellphone is not detected, see
http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
00:0c.0 Communication controller: Conexant Systems, Inc. HCF 56k
Data/Fax Modem (rev 08)
High Definition Audio cards can host modem chips.
For candidate card in slot 00:0c.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:0c.0 14f1:1033 1092:0ac8 Communication controller: Conexant Systems,
Inc. HCF 56k Data/Fax Modem
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 00:0c.0 ----
[ 0.115450] pci 0000:00:0c.0: reg 10: [mem 0xfebe0000-0xfebeffff]
[ 0.115462] pci 0000:00:0c.0: reg 14: [io 0xc000-0xc007]
[ 0.115519] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
[ 0.115527] pci 0000:00:0c.0: PME# disabled
The PCI slot 00:0c.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished firmware and bootup diagnostics, next deducing cogent
software. ===
Predictive diagnostics for card in bus 00:0c.0:
Modem chipset not detected on
NAME="Communication controller: Conexant Systems, Inc. HCF 56k Data/Fax
Modem "
CLASS=0780
PCIDEV=14f1:1033
SUBSYS=1092:0ac8
IRQ=11
IDENT=hcfpcimodem
For candidate modem in: 00:0c.0
Primary device ID:
Support type needed or chipset:
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.5
and the compiler used in kernel assembly: 4.4.5
linux-headers-2.6.35-22-generic resources needed for compiling are not
manifestly ready!
If compiling is necessary packages must be installed, providing:
linux-headers-2.6.35-22-generic
If a driver compilation fails, with message including some lack of some
FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from
http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed
to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1
wlan0 wlan3
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/sl-modem.conf:install slamr /sbin/modprobe -qb
ungrab-winmodem; /sbin/modprobe --ignore-install slamr; test
-e /dev/slamr0 && (chmod 660 /dev/slamr0 && chgrp dialout /dev/slamr0)
|| (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp
dialout /dev/slamr0)
/etc/modprobe.d/sl-modem.conf:install slusb /sbin/modprobe -qb
ungrab-winmodem; /sbin/modprobe --ignore-install slusb; test
-e /dev/slusb0 && (chmod 660 /dev/slusb0 && chgrp dialout /dev/slusb0)
|| (/bin/mknod -m 660 /dev/slusb0 c 243 0 2>/dev/null && chgrp
dialout /dev/slusb0)
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order
to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.35-22-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.23
Linux version 2.6.35-22-generic (buildd@vernadsky) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #35-Ubuntu SMP Sat Oct 16 20:36:48 UTC 2010
scanModem update of: 2010_05_29
Distrib_ID=Ubuntu
DistribCodeName=maverick
AptRepositoryStem=http://es.archive.ubuntu.com/ubuntu/
The dkms driver upgrade utilities are installed,
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_atiixp_modem snd_via82xx_modem snd_intel8x0m slamr
slamrTest=
Attached USB devices are:
ID 06bd:2091 AGFA-Gevaert NV SnapScan e20
ID ffc0:0001
ID 0783:0006 C3PO LTC31v2
ID 047f:0ca1 Plantronics, Inc. USB DSP v4 Audio Interface
ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
ID 058f:1234 Alcor Micro Corp. Flash Drive
ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
00:0c.0 Communication controller: Conexant Systems, Inc. HCF 56k Data/Fax Modem (rev 08)
High Definition Audio cards can host modem chips.
For candidate card in slot 00:0c.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:0c.0 14f1:1033 1092:0ac8 Communication controller: Conexant Systems, Inc. HCF 56k Data/Fax Modem
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 00:0c.0 ----
[ 0.115450] pci 0000:00:0c.0: reg 10: [mem 0xfebe0000-0xfebeffff]
[ 0.115462] pci 0000:00:0c.0: reg 14: [io 0xc000-0xc007]
[ 0.115519] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
[ 0.115527] pci 0000:00:0c.0: PME# disabled
The PCI slot 00:0c.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:0c.0:
Modem chipset not detected on
NAME="Communication controller: Conexant Systems, Inc. HCF 56k Data/Fax Modem "
CLASS=0780
PCIDEV=14f1:1033
SUBSYS=1092:0ac8
IRQ=11
IDENT=hcfpcimodem
For candidate modem in: 00:0c.0
Primary device ID:
Support type needed or chipset:
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.5
and the compiler used in kernel assembly: 4.4.5
linux-headers-2.6.35-22-generic resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
linux-headers-2.6.35-22-generic
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1 wlan0 wlan3
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/sl-modem.conf:install slamr /sbin/modprobe -qb ungrab-winmodem; /sbin/modprobe --ignore-install slamr; test -e /dev/slamr0 && (chmod 660 /dev/slamr0 && chgrp dialout /dev/slamr0) || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
/etc/modprobe.d/sl-modem.conf:install slusb /sbin/modprobe -qb ungrab-winmodem; /sbin/modprobe --ignore-install slusb; test -e /dev/slusb0 && (chmod 660 /dev/slusb0 && chgrp dialout /dev/slusb0) || (/bin/mknod -m 660 /dev/slusb0 c 243 0 2>/dev/null && chgrp dialout /dev/slusb0)
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
