Wijak,
scanModem reports that your modem is supported through hsfmodem
drivers by Linuxant:
Predictive diagnostics for card in bus 00:1f.6:
Modem chipset detected on
NAME="Modem: Intel Corporation 82801DB/DBL/DBM "
CLASS=0703
PCIDEV=8086:24c6
SUBSYS=1025:0064
IRQ=10
SOFT=8086:24c6.MC97
CodecArchived=CXT
CodecClass=CXT
IDENT=hsfmodem
Driver=hsfmodem-drivers
For candidate modem in: 00:1f.6
0703 Modem: Intel Corporation 82801DB/DBL/DBM
Primary device ID: 8086:24c6
Subsystem PCI_id 1025:0064
Softmodem codec or chipset from diagnostics:
from Archives: CXT, a Conexant type
using hsfmodem software.
CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem
software support.
Support type needed or chipset: hsfmodem
Writing DOCs/Intel.txt
For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt
For all code packages from Linuxant.com, either a driver set matching
the boot kernel will be installed,
or the drivers will first be compiled and then installed. The expert
on modem software for Linux is
"Support (Jonathan)" <modem.support@xxxxxxxxxxxx>
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download http://www.linuxant.com/drivers/hsf/full/archive/hsfmodem-7.80.02.06full/hsfmodem_7.80.02.06full_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
/***************************************************************
as instructions for deb packages are here:
/* http://www.linuxant.com/drivers/hsf/install.php */
1. install the package with "dpkg -i hsfmodem_{version}_{arch}.deb",
if apt-get or some other tool hasn't already done it for you.
2. if necessary, run "hsfconfig" to complete the installation, enter
license information, or to change your modem's configuration.
If you need to rebuild the Debian generic package from source, you can
get the TAR package, and from the top directory run: "make debdist". A
pre-compiled DEB package for the currently running kernel can be built
using "make debprecomp" instead.
/***************************************************************
The installation command for a .deb suffic packages is, with root/adm
permission:
sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Read DOCs/Conexant.txt
Regards,
Antonio
On Fri, Nov 19, 2010 at 10:07 AM, Wijak Ausawalarp <awijak@xxxxxxxxx> wrote:
> Thank you very much.
> --
>
> Best Regards,
>
> Wijak Ausawalarp
>
