Larry, Would you mind posting output of $ sudo cat /etc/wvdial.conf and put ***** in place of password? Might have removed the information when you ran $ sudo wvdialconf /etc/wvdial.conf ? Regards, Antonio On Sat, Nov 13, 2010 at 7:40 PM, Larry Hager <larrymeditates@xxxxxxxxx> wrote: > I set up my dialer then tried to connect running martian modem and wvdial and I got the message that the phone number, log-in, password, etc. was missing even though when I checked the file I could see the phone number, log-in, password, etc. in the file. Can you tell me what's wrong? I've included the output below: > > larry@ubuntu-laptop:~$ sudo wvdial > [sudo] password for larry: > --> WvDial: Internet dialer version 1.60 > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Configuration does not specify a valid phone number. > --> Configuration does not specify a valid login name. > --> Configuration does not specify a valid password. > larry@ubuntu-laptop:~$ sudo nano /etc/wvdial.conf > larry@ubuntu-laptop:~$ sudo wvdial > --> WvDial: Internet dialer version 1.60 > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Configuration does not specify a valid phone number. > --> Configuration does not specify a valid login name. > --> Configuration does not specify a valid password. > larry@ubuntu-laptop:~$ sudo nano /etc/wvdial.conf > larry@ubuntu-laptop:~$ > > > > > > Thanks! > > Larry Hager > > > >
