Hi Antonio and Marvin:
My Motorola modem seemed to install, and modprobe ungrab-winmodem,
followed by modprobe slamr, followed by slmodemd -c NZ /dev/slamr0
produced a 'Bad country!' warning, so I changed to USA, and
/dev/ttySL0 as a symbolic link from /dev/pts/0 seemed to be made OK.
But ls -l in /dev never showed either /dev/ttySL0 or /pts/0...
/dev/pts seemed to be always empty.
I've attached ModemData.txt.
Thanks for your help.
Sincerely,
Lee Hinkleman
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.18-6-686
With this Subject Line cogent experts will be alerted, and useful case
names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in
YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for
dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
Internet Provider mail filters.
So in a day, also check the Archived responses at
http://www.linmodems.org
-------------------------- System information
----------------------------
CPU=i686, debian , ALSA_version=1.0.12
Linux version 2.6.18-6-686 (Debian 2.6.18.dfsg.1-22)
(dannf@xxxxxxxxxx) (gcc version 4.1.2 20061115 (prerelease) (Debian
4.1.1-21)) #1 SMP Tue Jun 17 21:31:27 UTC 2008
scanModem update of: 2010_05_29
/etc/lsb-release not found
Presently install your Linux Distributions dkms package. It provides
for automated driver updates,
following upgrade of your kernel. For details see
http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
Attached USB devices are:
ID 058f:6369 Alcor Micro Corp.
If a cellphone is not detected, see
http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
05:04.0 Modem: Motorola Unknown device 3052 (rev 04)
05:09.0 Serial controller: 3Com Corp, Modem Division 56K FaxModem
Model 5610 (rev 01)
High Definition Audio cards can host modem chips.
For candidate card in slot 05:04.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
05:04.0 1057:3052 1057:3020 Modem: Motorola Unknown device 3052
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 05:04.0 ----
ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 201
0000:05:04.0: ttyS1 at I/O 0x1008 (irq = 201) is a 16450
0000:05:04.0: ttyS2 at I/O 0x1010 (irq = 201) is a 8250
0000:05:04.0: ttyS3 at I/O 0x1018 (irq = 201) is a 16450
Couldn't register serial port 0000:05:04.0: -28
For candidate card in slot 05:09.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
05:09.0 12b9:1008 12b9:00a2 Serial controller: 3Com Corp, Modem
Division 56K FaxModem Model 5610
Modem interrupt assignment and sharing:
209: 0 IO-APIC-level uhci_hcd:usb2
--- Bootup diagnostics for card in PCI slot 05:09.0 ----
ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 209
Couldn't register serial port 0000:05:09.0: -28
=== Finished firmware and bootup diagnostics, next deducing cogent
software. ===
Predictive diagnostics for card in bus 05:04.0:
Modem chipset detected on
NAME="Modem: Motorola Unknown device 3052 "
CLASS=0703
PCIDEV=1057:3052
SUBSYS=1057:3020
IRQ=201
IDENT=slamr
For candidate modem in: 05:04.0
0703 Modem: Motorola Unknown device 3052
Primary device ID: 1057:3052
Support type needed or chipset: slamr
1057:3052 has a Motorola chipset, poorly supported by Motorola itself
However Zello discovered that drivers written to support Smartlink
modems do support the 1057:3052 chipset!!
It sufficed to add 1057:3052 to the list of modem cards recognized by
the Smartlink slamr driver.
There is a ungrab-winmodem driver used in conjunction with slamr,
which must have 1057:3052
similarly added. See messages from Zello:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html
and Alvaro Aguirre about the ungrab-winmodem fix:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html
For general guidance on ungrab-winmodem + slamr usage, read the
DOCs/Smartlink.txt
The modem is supported by the Smartlink
plus the slmodemd helper utility. Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through
guidance.
For 2.6.18-6-686 compiling drivers is necessary. As of October 2007
the current packages at
http://linmodems.technion.ac.il/packages/smartlink/ are the
ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Vendor 10b7 3COM Inc. purchased the vendor 12b9 US Robotics modem
technology.
Their winmodems have no Linux support. Their controller chipset modems
are supported by the Linux serial drivers.
The PCI id 1057:3052 modem is Uncertain_support_status.
PCI ID Name Support status
-------------------------------------------------------------------------------
10b7:1006 3COM 0038TA AC101 - TF Mini-PCI winmodem, not supported
10b7:1007 3COM 3C556 V.90 Mini-PCI winmodem, not supported
12b9:1006 US Robotics 3cp803598 Voice winmodem, not supported
12b9:1007 US Robotics ERL3263A-0 DF GWPCI PC99 winmodem, not supported
12b9:0062 US Robotics erk41926a-0.6 usr 56k serial driver supported
12b9:1008 US Robotics 3cp803598 serial driver supported
====== end 3COM section =======
Predictive diagnostics for card in bus 05:09.0:
Modem chipset detected on
NAME="Serial controller: 3Com Corp, Modem Division 56K FaxModem Model
5610 "
CLASS=0700
PCIDEV=12b9:1008
SUBSYS=12b9:00a2
IRQ=209
IDENT=USrobotics.serial
For candidate modem in: 05:09.0
0700 Serial controller: 3Com Corp, Modem Division 56K FaxModem Model
5610
Primary device ID: 12b9:1008
Support type needed or chipset: USrobotics.serial
Vendor 10b7 3COM Inc. purchased the vendor 12b9 US Robotics modem
technology.
Their winmodems have no Linux support. Their controller chipset modems
are supported by the Linux serial drivers.
The PCI id 12b9:1008 modem is Supported.
PCI ID Name Support status
-------------------------------------------------------------------------------
10b7:1006 3COM 0038TA AC101 - TF Mini-PCI winmodem, not supported
10b7:1007 3COM 3C556 V.90 Mini-PCI winmodem, not supported
12b9:1006 US Robotics 3cp803598 Voice winmodem, not supported
12b9:1007 US Robotics ERL3263A-0 DF GWPCI PC99 winmodem, not supported
12b9:0062 US Robotics erk41926a-0.6 usr 56k serial driver supported
12b9:1008 US Robotics 3cp803598 serial driver supported
wvdialconf wvtest , should detect the modem. Read
DOCs/Testing.txt
====== end 3COM section =======
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.2
and the compiler used in kernel assembly: 4.1.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.18-6-686/build
However some compilations and executable functions may need additional
files,
in the FileNames.h (so called kernel "h"eaders) collection installed
in /usr/include/ .
For martian_modem, additional required packages are needed. The also
required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at
http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
Compressed files at: /usr/src/linux-source-2.6.18.tar.bz2
For Debian and some related distributions, a package
kernel-kbuild-2.6-18 may be needed to support driver compiling.
If a driver compilation fails, with message including some lack of
some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 260920 2007-03-18 10:52 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
auth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from
http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be
changed to match your modem's port.
Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
For Debian users, the linux-headers-2.6.18-6-686.deb can be used
instead of kernel-source/
