necesito ayuda
CPU0 CPU1
0: 48 0 IO-APIC-edge timer
1: 6 616 IO-APIC-edge i8042
4: 1 1 IO-APIC-edge
6: 1 4 IO-APIC-edge floppy
7: 0 0 IO-APIC-edge parport0
8: 1 0 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 4 2 IO-APIC-edge i8042
14: 459 778 IO-APIC-edge ata_piix
15: 0 0 IO-APIC-edge ata_piix
16: 118 874 IO-APIC-fasteoi uhci_hcd:usb5, eth1, HDA Intel
18: 0 0 IO-APIC-fasteoi uhci_hcd:usb4
19: 9786 2547 IO-APIC-fasteoi ata_piix, uhci_hcd:usb3
23: 396 17 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
26: 3 919 PCI-MSI-edge i915
27: 2440 18 PCI-MSI-edge eth0
NMI: 0 0 Non-maskable interrupts
LOC: 20811 18565 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
PND: 0 0 Performance pending work
RES: 1486 1659 Rescheduling interrupts
CAL: 52 60 Function call interrupts
TLB: 435 405 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 1 1 Machine check polls
ERR: 1
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf690000 (usable)
[ 0.000000] BIOS-e820: 00000000bf690000 - 00000000bf69e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf69e000 - 00000000bf6d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf6d0000 - 00000000bf6de000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf6e0000 - 00000000bf700000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf690 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BF700000 mask FFFF00000 uncachable
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf690000 (usable)
[ 0.000000] modified: 00000000bf690000 - 00000000bf69e000 (ACPI data)
[ 0.000000] modified: 00000000bf69e000 - 00000000bf6d0000 (ACPI NVS)
[ 0.000000] modified: 00000000bf6d0000 - 00000000bf6de000 (reserved)
[ 0.000000] modified: 00000000bf6e0000 - 00000000bf700000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 37857000 - 37fef0b3
[ 0.000000] Allocated new RAMDISK: 008de000 - 010760b3
[ 0.000000] Move RAMDISK from 0000000037857000 - 0000000037fef0b2 to 008de000 - 010760b2
[ 0.000000] ACPI: RSDP 000fb7b0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT bf690000 0003C (v01 A_M_I_ OEMRSDT 03000911 MSFT 00000097)
[ 0.000000] ACPI: FACP bf690200 00084 (v02 A_M_I_ OEMFACP 03000911 MSFT 00000097)
[ 0.000000] ACPI: DSDT bf6905c0 07C10 (v01 A0968 A0968000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS bf69e000 00040
[ 0.000000] ACPI: APIC bf690390 0006C (v01 A_M_I_ OEMAPIC 03000911 MSFT 00000097)
[ 0.000000] ACPI: MCFG bf690400 0003C (v01 A_M_I_ OEMMCFG 03000911 MSFT 00000097)
[ 0.000000] ACPI: OEMB bf69e040 00080 (v01 A_M_I_ AMI_OEM 03000911 MSFT 00000097)
[ 0.000000] ACPI: HPET bf6981d0 00038 (v01 A_M_I_ OEMHPET 03000911 MSFT 00000097)
[ 0.000000] ACPI: GSCI bf69e0c0 02024 (v01 A_M_I_ GMCHSCI 03000911 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2174MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00008da000 - 00008dd220] BRK ==> [00008da000 - 00008dd220]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008de000 - 00010760b3] NEW RAMDISK ==> [00008de000 - 00010760b3]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bf690
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf690
[ 0.000000] On node 0 totalpages: 783903
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1078200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4350 pages used for memmap
[ 0.000000] HighMem zone: 552340 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at bf700000 (gap: bf700000:3f700000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36024 r0 d21320 u1048576
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 777777
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=64f41fde-180a-4cc0-8dd7-114e24c82590 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 15680000 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bf690)
[ 0.000000] Memory: 3077672k/3136064k available (4673k kernel code, 56772k reserved, 2122k data, 656k init, 2226760k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1999.948 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.89 BogoMIPS (lpj=7999792)
[ 0.004023] Security Framework initialized
[ 0.004042] AppArmor: AppArmor initialized
[ 0.004049] Mount-cache hash table entries: 512
[ 0.004185] Initializing cgroup subsys ns
[ 0.004190] Initializing cgroup subsys cpuacct
[ 0.004194] Initializing cgroup subsys memory
[ 0.004201] Initializing cgroup subsys devices
[ 0.004204] Initializing cgroup subsys freezer
[ 0.004206] Initializing cgroup subsys net_cls
[ 0.004227] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004230] CPU: L2 cache: 512K
[ 0.004233] CPU: Physical Processor ID: 0
[ 0.004235] CPU: Processor Core ID: 0
[ 0.004239] mce: CPU supports 6 MCE banks
[ 0.004249] CPU0: Thermal monitoring enabled (TM2)
[ 0.004252] using mwait in idle threads.
[ 0.004259] Performance Events: Core2 events, Intel PMU driver.
[ 0.004267] ... version: 2
[ 0.004269] ... bit width: 40
[ 0.004271] ... generic registers: 2
[ 0.004273] ... value mask: 000000ffffffffff
[ 0.004275] ... max period: 000000007fffffff
[ 0.004277] ... fixed-purpose events: 3
[ 0.004279] ... event mask: 0000000700000003
[ 0.004284] Checking 'hlt' instruction... OK.
[ 0.022884] ACPI: Core revision 20090903
[ 0.036011] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.036018] ftrace: allocating 21771 entries in 43 pages
[ 0.040067] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040378] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080291] CPU0: Intel(R) Celeron(R) CPU E1400 @ 2.00GHz stepping 0d
[ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.168090] CPU1: Intel(R) Celeron(R) CPU E1400 @ 2.00GHz stepping 0d
[ 0.168102] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.172020] Brought up 2 CPUs
[ 0.172023] Total of 2 processors activated (7999.86 BogoMIPS).
[ 0.172342] CPU0 attaching sched-domain:
[ 0.172345] domain 0: span 0-1 level MC
[ 0.172348] groups: 0 1
[ 0.172354] CPU1 attaching sched-domain:
[ 0.172356] domain 0: span 0-1 level MC
[ 0.172359] groups: 1 0
[ 0.172464] devtmpfs: initialized
[ 0.172464] regulator: core version 0.5
[ 0.172464] Time: 12:48:02 Date: 09/17/10
[ 0.172464] NET: Registered protocol family 16
[ 0.172464] Trying to unpack rootfs image as initramfs...
[ 0.172464] EISA bus registered
[ 0.172464] ACPI: bus type pci registered
[ 0.172464] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.172464] PCI: Not using MMCONFIG.
[ 0.172527] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.172529] PCI: Using configuration type 1 for base access
[ 0.173679] bio: create slab <bio-0> at 0
[ 0.174760] ACPI: EC: Look up EC in DSDT
[ 0.179088] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.185255] ACPI: Interpreter enabled
[ 0.185272] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.185306] ACPI: Using IOAPIC for interrupt routing
[ 0.185377] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.188929] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[ 0.188933] PCI: Using MMCONFIG for extended config space
[ 0.198279] ACPI Warning: Incorrect checksum in table [OEMB] - 24, should be 17 (20090903/tbutils-314)
[ 0.199220] ACPI: No dock devices found.
[ 0.199369] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.199479] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe980000-0xfe9fffff]
[ 0.199484] pci 0000:00:02.0: reg 14 io port: [0xcc00-0xcc07]
[ 0.199490] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xe0000000-0xefffffff]
[ 0.199495] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfe800000-0xfe8fffff]
[ 0.199591] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe978000-0xfe97bfff]
[ 0.199642] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.199647] pci 0000:00:1b.0: PME# disabled
[ 0.199715] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.199719] pci 0000:00:1c.0: PME# disabled
[ 0.199789] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.199793] pci 0000:00:1c.1: PME# disabled
[ 0.199845] pci 0000:00:1d.0: reg 20 io port: [0xc400-0xc41f]
[ 0.199897] pci 0000:00:1d.1: reg 20 io port: [0xc480-0xc49f]
[ 0.199948] pci 0000:00:1d.2: reg 20 io port: [0xc800-0xc81f]
[ 0.200020] pci 0000:00:1d.3: reg 20 io port: [0xc880-0xc89f]
[ 0.200080] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe977c00-0xfe977fff]
[ 0.200134] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.200138] pci 0000:00:1d.7: PME# disabled
[ 0.200269] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.200274] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.200278] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.200326] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.200333] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.200340] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[ 0.200347] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[ 0.200355] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.200401] pci 0000:00:1f.2: reg 10 io port: [0xc080-0xc087]
[ 0.200408] pci 0000:00:1f.2: reg 14 io port: [0xc000-0xc003]
[ 0.200414] pci 0000:00:1f.2: reg 18 io port: [0xbc00-0xbc07]
[ 0.200420] pci 0000:00:1f.2: reg 1c io port: [0xb880-0xb883]
[ 0.200427] pci 0000:00:1f.2: reg 20 io port: [0xb800-0xb80f]
[ 0.200452] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.200456] pci 0000:00:1f.2: PME# disabled
[ 0.200504] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.200637] pci 0000:01:00.0: reg 10 64bit mmio: [0xfeac0000-0xfeafffff]
[ 0.200647] pci 0000:01:00.0: reg 18 io port: [0xdc00-0xdc7f]
[ 0.200712] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.200717] pci 0000:01:00.0: PME# disabled
[ 0.200772] pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff]
[ 0.200776] pci 0000:00:1c.1: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.200819] pci 0000:03:01.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.200827] pci 0000:03:01.0: reg 14 32bit mmio: [0xfebffc00-0xfebffcff]
[ 0.200855] pci 0000:03:01.0: reg 30 32bit mmio pref: [0xfebe0000-0xfebeffff]
[ 0.200875] pci 0000:03:01.0: supports D1 D2
[ 0.200878] pci 0000:03:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.200882] pci 0000:03:01.0: PME# disabled
[ 0.200930] pci 0000:00:1e.0: transparent bridge
[ 0.200934] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.200939] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.200959] pci_bus 0000:00: on NUMA node 0
[ 0.200970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.201140] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.201253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.201316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.211379] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.211508] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.211647] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.211771] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.211892] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.212052] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.212177] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.212315] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.212451] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.212466] vgaarb: loaded
[ 0.212625] SCSI subsystem initialized
[ 0.212744] libata version 3.00 loaded.
[ 0.212840] usbcore: registered new interface driver usbfs
[ 0.212853] usbcore: registered new interface driver hub
[ 0.212886] usbcore: registered new device driver usb
[ 0.213095] ACPI: WMI: Mapper loaded
[ 0.213098] PCI: Using ACPI for IRQ routing
[ 0.213281] NetLabel: Initializing
[ 0.213283] NetLabel: domain hash size = 128
[ 0.213285] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.213298] NetLabel: unlabeled traffic allowed by default
[ 0.213345] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.213351] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.216200] Switching to clocksource tsc
[ 0.218333] AppArmor: AppArmor Filesystem Enabled
[ 0.218355] pnp: PnP ACPI init
[ 0.218375] ACPI: bus type pnp registered
[ 0.223519] pnp: PnP ACPI: found 19 devices
[ 0.223523] ACPI: ACPI bus type pnp unregistered
[ 0.223529] PnPBIOS: Disabled by ACPI PNP
[ 0.223550] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.223562] system 00:08: ioport range 0x290-0x297 has been reserved
[ 0.223569] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.223572] system 00:09: ioport range 0x800-0x87f has been reserved
[ 0.223575] system 00:09: ioport range 0x480-0x4bf has been reserved
[ 0.223579] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.223582] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.223590] system 00:0c: iomem range 0xffc00000-0xffefffff has been reserved
[ 0.223597] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.223600] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.223608] system 00:11: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.223615] system 00:12: iomem range 0x0-0x9ffff could not be reserved
[ 0.223618] system 00:12: iomem range 0xc0000-0xcffff could not be reserved
[ 0.223621] system 00:12: iomem range 0xe0000-0xfffff could not be reserved
[ 0.223624] system 00:12: iomem range 0x100000-0xbf6fffff could not be reserved
[ 0.258354] pci 0000:03:01.0: BAR 6: address space collision on of device [0xfebe0000-0xfebeffff]
[ 0.258392] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.258396] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.258402] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc01fffff
[ 0.258406] pci 0000:00:1c.0: PREFETCH window: 0x000000c0200000-0x000000c03fffff
[ 0.258413] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:01
[ 0.258417] pci 0000:00:1c.1: IO window: 0xd000-0xdfff
[ 0.258422] pci 0000:00:1c.1: MEM window: 0xfea00000-0xfeafffff
[ 0.258427] pci 0000:00:1c.1: PREFETCH window: 0x000000c0400000-0x000000c05fffff
[ 0.258434] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.258437] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.258443] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.258447] pci 0000:00:1e.0: PREFETCH window: 0xc0600000-0xc06fffff
[ 0.258462] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.258472] alloc irq_desc for 16 on node -1
[ 0.258474] alloc kstat_irqs on node -1
[ 0.258481] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.258487] pci 0000:00:1c.0: setting latency timer to 64
[ 0.258495] alloc irq_desc for 17 on node -1
[ 0.258497] alloc kstat_irqs on node -1
[ 0.258501] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.258506] pci 0000:00:1c.1: setting latency timer to 64
[ 0.258513] pci 0000:00:1e.0: setting latency timer to 64
[ 0.258518] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.258521] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.258524] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.258527] pci_bus 0000:02: resource 1 mem: [0xc0000000-0xc01fffff]
[ 0.258530] pci_bus 0000:02: resource 2 pref mem [0xc0200000-0xc03fffff]
[ 0.258532] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.258535] pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.258538] pci_bus 0000:01: resource 2 pref mem [0xc0400000-0xc05fffff]
[ 0.258541] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.258543] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.258546] pci_bus 0000:03: resource 2 pref mem [0xc0600000-0xc06fffff]
[ 0.258548] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.258551] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.258594] NET: Registered protocol family 2
[ 0.258716] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.259086] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.259743] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.260108] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.260112] TCP reno registered
[ 0.260250] NET: Registered protocol family 1
[ 0.260286] pci 0000:00:02.0: Boot video device
[ 0.260600] cpufreq-nforce2: No nForce2 chipset.
[ 0.260631] Scanning for low memory corruption every 60 seconds
[ 0.260768] audit: initializing netlink socket (disabled)
[ 0.260782] type=2000 audit(1284727682.259:1): initialized
[ 0.270941] highmem bounce pool size: 64 pages
[ 0.270947] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.272674] VFS: Disk quotas dquot_6.5.2
[ 0.272760] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.273470] fuse init (API version 7.13)
[ 0.273585] msgmni has been set to 1664
[ 0.273902] alg: No test for stdrng (krng)
[ 0.273987] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.273991] io scheduler noop registered
[ 0.273993] io scheduler anticipatory registered
[ 0.273995] io scheduler deadline registered
[ 0.274040] io scheduler cfq registered (default)
[ 0.274204] alloc irq_desc for 24 on node -1
[ 0.274207] alloc kstat_irqs on node -1
[ 0.274218] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.274228] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.274356] alloc irq_desc for 25 on node -1
[ 0.274358] alloc kstat_irqs on node -1
[ 0.274366] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.274375] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.274481] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.274571] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.274686] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.274690] ACPI: Power Button [PWRB]
[ 0.274740] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.274743] ACPI: Power Button [PWRF]
[ 0.275423] ACPI: SSDT bf6a00f0 00214 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.275782] processor LNXCPU:00: registered as cooling_device0
[ 0.276119] ACPI: SSDT bf6a0310 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.276462] processor LNXCPU:01: registered as cooling_device1
[ 0.281100] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.281208] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.281827] 00:10: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.283022] brd: module loaded
[ 0.283614] loop: module loaded
[ 0.283737] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.283873] ata_piix 0000:00:1f.1: version 2.13
[ 0.283891] alloc irq_desc for 18 on node -1
[ 0.283893] alloc kstat_irqs on node -1
[ 0.283901] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.283944] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.284063] isapnp: Scanning for PnP cards...
[ 0.333004] scsi0 : ata_piix
[ 0.374632] Freeing initrd memory: 7776k freed
[ 0.376650] scsi1 : ata_piix
[ 0.378467] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.378473] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.378581] alloc irq_desc for 19 on node -1
[ 0.378586] alloc kstat_irqs on node -1
[ 0.378599] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.378606] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.378688] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.422390] scsi2 : ata_piix
[ 0.423481] scsi3 : ata_piix
[ 0.424994] ata3: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 19
[ 0.424998] ata4: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 19
[ 0.425374] Fixed MDIO Bus: probed
[ 0.425412] PPP generic driver version 2.4.2
[ 0.425485] tun: Universal TUN/TAP device driver, 1.6
[ 0.425488] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 0.425598] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.425631] alloc irq_desc for 23 on node -1
[ 0.425633] alloc kstat_irqs on node -1
[ 0.425640] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.425658] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.425662] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.425704] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.425723] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.425734] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.429619] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.429732] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe977c00
[ 0.443451] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.443562] usb usb1: configuration #1 chosen from 1 choice
[ 0.443593] hub 1-0:1.0: USB hub found
[ 0.443602] hub 1-0:1.0: 8 ports detected
[ 0.443677] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.443696] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.443741] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.443750] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.443753] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.443800] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.443826] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
[ 0.443933] usb usb2: configuration #1 chosen from 1 choice
[ 0.443964] hub 2-0:1.0: USB hub found
[ 0.443971] hub 2-0:1.0: 2 ports detected
[ 0.444024] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.444031] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.444034] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.444079] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.444104] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c480
[ 0.444205] usb usb3: configuration #1 chosen from 1 choice
[ 0.444234] hub 3-0:1.0: USB hub found
[ 0.444241] hub 3-0:1.0: 2 ports detected
[ 0.444289] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.444297] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.444300] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.444343] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.444377] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[ 0.444484] usb usb4: configuration #1 chosen from 1 choice
[ 0.444513] hub 4-0:1.0: USB hub found
[ 0.444520] hub 4-0:1.0: 2 ports detected
[ 0.444571] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.444579] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.444582] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.444630] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.444663] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c880
[ 0.444766] usb usb5: configuration #1 chosen from 1 choice
[ 0.444795] hub 5-0:1.0: USB hub found
[ 0.444802] hub 5-0:1.0: 2 ports detected
[ 0.444917] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.447496] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.447504] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.447602] mice: PS/2 mouse device common for all mice
[ 0.447722] rtc_cmos 00:03: RTC can wake from S4
[ 0.447769] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.447794] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.447916] device-mapper: uevent: version 1.0.3
[ 0.448050] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 0.448132] device-mapper: multipath: version 1.1.0 loaded
[ 0.448134] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.448272] EISA: Probing bus 0 at eisa.0
[ 0.448278] Cannot allocate resource for EISA slot 1
[ 0.448299] EISA: Detected 0 cards.
[ 0.448389] cpuidle: using governor ladder
[ 0.448391] cpuidle: using governor menu
[ 0.448877] TCP cubic registered
[ 0.449042] NET: Registered protocol family 10
[ 0.449555] lo: Disabled Privacy Extensions
[ 0.449914] NET: Registered protocol family 17
[ 0.450412] Using IPI No-Shortcut mode
[ 0.450511] PM: Resume from disk failed.
[ 0.450524] registered taskstats version 1
[ 0.450809] Magic number: 10:355:835
[ 0.450890] rtc_cmos 00:03: setting system clock to 2010-09-17 12:48:03 UTC (1284727683)
[ 0.450894] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.450895] EDD information not available.
[ 0.478086] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.559741] ata1.01: ATAPI: ASUS CD-S520/A5, 1.22, max UDMA/33
[ 0.575638] ata1.01: configured for UDMA/33
[ 0.591635] ata4.01: NODEV after polling detection
[ 0.599628] ata4.00: ATAPI: ATAPI iHAS124 Y, BL0W, max UDMA/100
[ 0.615648] ata4.00: configured for UDMA/100
[ 0.619136] ata3.00: ATA-8: ST3320613AS, CC2H, max UDMA/133
[ 0.619139] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.639752] isapnp: No Plug & Play device found
[ 0.647865] scsi 0:0:1:0: CD-ROM ASUS CD-S520/A5 1.22 PQ: 0 ANSI: 5
[ 0.650855] sr0: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray
[ 0.650860] Uniform CD-ROM driver Revision: 3.20
[ 0.651026] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 0.651090] sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 0.675144] ata3.00: configured for UDMA/133
[ 0.675290] scsi 2:0:0:0: Direct-Access ATA ST3320613AS CC2H PQ: 0 ANSI: 5
[ 0.675443] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 0.675451] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 0.675523] sd 2:0:0:0: [sda] Write Protect is off
[ 0.675526] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.675592] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.675764] sda:
[ 0.676865] scsi 3:0:0:0: CD-ROM ATAPI iHAS124 Y BL0W PQ: 0 ANSI: 5
[ 0.681651] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.681809] sr 3:0:0:0: Attached scsi CD-ROM sr1
[ 0.681875] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 0.701230] sda1 sda2 < sda5 sda6 sda7 >
[ 0.754607] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.754624] Freeing unused kernel memory: 656k freed
[ 0.754989] Write protecting the kernel text: 4676k
[ 0.755035] Write protecting the kernel read-only data: 1840k
[ 0.777040] udev: starting version 151
[ 0.850583] ATL1E 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.850600] ATL1E 0000:01:00.0: setting latency timer to 64
[ 0.910024] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 0.910051] 8139cp 0000:03:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 0.931250] 8139too Fast Ethernet driver 0.9.28
[ 0.931298] 8139too 0000:03:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.932700] eth1: RealTek RTL8139 at 0xe800, 00:50:bf:32:78:c1, IRQ 16
[ 0.937165] Floppy drive(s): fd0 is 1.44M
[ 0.947867] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 0.955697] FDC 0 is a post-1991 82077
[ 1.124033] usb 2-2: configuration #1 chosen from 1 choice
[ 1.139945] usbcore: registered new interface driver hiddev
[ 1.153213] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4
[ 1.153354] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 1.153389] usbcore: registered new interface driver usbhid
[ 1.153393] usbhid: v2.6:USB HID core driver
[ 1.319365] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[ 1.319371] EXT4-fs (sda6): write access will be enabled during recovery
[ 5.388600] EXT4-fs (sda6): recovery complete
[ 5.393414] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 15.420219] udev: starting version 151
[ 15.469715] Adding 1373516k swap on /dev/sda7. Priority:-1 extents:1 across:1373516k
[ 15.594648] lp: driver loaded but no devices found
[ 15.609897] Linux agpgart interface v0.103
[ 15.612816] agpgart-intel 0000:00:00.0: Intel G33 Chipset
[ 15.613166] agpgart-intel 0000:00:00.0: detected 7164K stolen memory
[ 15.696416] intel_rng: FWH not detected
[ 15.752156] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 15.782096] [drm] Initialized drm 1.1.0 20060810
[ 15.794398] parport_pc 00:07: reported by Plug and Play ACPI
[ 15.794518] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 15.834638] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.834644] i915 0000:00:02.0: setting latency timer to 64
[ 15.837172] ppdev: user-space parallel port driver
[ 15.843809] alloc irq_desc for 26 on node -1
[ 15.843813] alloc kstat_irqs on node -1
[ 15.843824] i915 0000:00:02.0: irq 26 for MSI/MSI-X
[ 15.843832] [drm] set up 7M of stolen space
[ 15.845998] [drm] initialized overlay support
[ 15.870475] type=1505 audit(1284742098.917:2): operation="profile_load" pid=572 name="/sbin/dhclient3"
[ 15.871189] type=1505 audit(1284742098.917:3): operation="profile_load" pid=572 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 15.871577] type=1505 audit(1284742098.917:4): operation="profile_load" pid=572 name="/usr/lib/connman/scripts/dhclient-script"
[ 15.891261] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 15.894129] lp0: using parport0 (interrupt-driven).
[ 16.041854] alloc irq_desc for 27 on node -1
[ 16.041861] alloc kstat_irqs on node -1
[ 16.041882] ATL1E 0000:01:00.0: irq 27 for MSI/MSI-X
[ 16.042056] ATL1E 0000:01:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 16.052059] fb0: inteldrmfb frame buffer device
[ 16.052063] registered panic notifier
[ 16.052765] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 16.052828] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.052862] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 16.057993] vga16fb: initializing
[ 16.058000] vga16fb: mapped to 0xc00a0000
[ 16.058005] vga16fb: not registering due to another framebuffer present
[ 16.177827] Console: switching to colour frame buffer device 180x56
[ 16.356257] type=1505 audit(1284742099.405:5): operation="profile_replace" pid=868 name="/sbin/dhclient3"
[ 16.356963] type=1505 audit(1284742099.405:6): operation="profile_replace" pid=868 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 16.357340] type=1505 audit(1284742099.405:7): operation="profile_replace" pid=868 name="/usr/lib/connman/scripts/dhclient-script"
[ 16.359436] type=1505 audit(1284742099.405:8): operation="profile_load" pid=869 name="/usr/lib/cups/backend/cups-pdf"
[ 16.360269] type=1505 audit(1284742099.409:9): operation="profile_load" pid=869 name="/usr/sbin/cupsd"
[ 16.363204] type=1505 audit(1284742099.409:10): operation="profile_load" pid=870 name="/usr/sbin/mysqld"
[ 16.365816] type=1505 audit(1284742099.413:11): operation="profile_load" pid=871 name="/usr/sbin/mysqld-akonadi"
[ 26.524018] eth1: no IPv6 routers present
[ 26.940026] eth0: no IPv6 routers present
[ 68.075962] __ratelimit: 6 callbacks suppressed
[ 68.075965] type=1503 audit(1284742151.121:14): operation="capable" pid=1925 parent=1912 profile="/usr/sbin/mysqld-akonadi" name="sys_resource"
[ 68.478634] type=1503 audit(1284742151.525:15): operation="capable" pid=1989 parent=1975 profile="/usr/sbin/mysqld-akonadi" name="sys_resource"
[ 77.228229] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
Module Size Used by
snd_hda_codec_via 27111 1
fbcon 35102 73
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
vga16fb 11385 0
vgastate 8961 1 vga16fb
snd_hda_intel 21877 2
snd_hda_codec 74201 2 snd_hda_codec_via,snd_hda_intel
snd_hwdep 5412 1 snd_hda_codec
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70662 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 1338 0
snd_seq_oss 26726 0
snd_seq_midi 4557 0
snd_rawmidi 19056 1 snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 19098 2 snd_pcm,snd_seq
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
i915 282354 2
ppdev 5259 0
drm_kms_helper 29297 1 i915
snd 54148 15 snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
asus_atk0110 9017 0
parport_pc 25962 1
drm 162471 3 i915,drm_kms_helper
psmouse 63245 0
soundcore 6620 1 snd
serio_raw 3978 0
intel_agp 24177 2 i915
snd_page_alloc 7076 2 snd_hda_intel,snd_pcm
agpgart 31724 2 drm,intel_agp
i2c_algo_bit 5028 1 i915
video 17375 1 i915
output 1871 1 video
lp 7028 0
parport 32635 3 ppdev,parport_pc,lp
usbhid 36110 0
hid 67032 1 usbhid
floppy 53016 0
8139too 18545 0
8139cp 16186 0
mii 4381 2 8139too,8139cp
atl1e 28018 0
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.32-21-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.21
Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010
scanModem update of: 2010_05_29
Distrib_ID=Ubuntu
DistribCodeName=lucid
AptRepositoryStem=http://ubuntu.icrt.cu/lucid/
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
High Definition Audio cards can host modem chips.
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 1043:82ea Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller
Modem interrupt assignment and sharing:
16: 118 874 IO-APIC-fasteoi uhci_hcd:usb5, eth1, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.199591] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe978000-0xfe97bfff]
[ 0.199642] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.199647] pci 0000:00:1b.0: PME# disabled
[ 16.052828] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.052862] HDA Intel 0000:00:1b.0: setting latency timer to 64
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: VT1708B Analog : VT1708B Analog : playback 2 : capture 2
00-01: VT1708B Digital : VT1708B Digital : playback 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfe978000 irq 16
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.32-21-generic/kernel/sound/pci/hda/snd-hda-intel.ko
The HDA diagnostics did not recognize a modem chip on the audio subsystem,
though a Conexant chip modem might not be recognized.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
A candidate modem is not transparent among the PCI devices:
------------------------------------------------
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
01:00.0 Ethernet controller: Atheros Communications Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0)
03:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
------------------------------------------------
with USB, bridge, and RAM devices not displayed.
If a High Definition Audio card is present, if might be hosted on the Subsystem.
If your modem is an
external USB type,
connected by an external serial cable,
or mounted internally on an ISA card,
then scanModem would not access it.
Try with Root permission
$ sudo wvdialconf /etc/wvdial.conf
to detect these modem types and some USB modems.
If the detection is successful, read the DOCs/wvdial.txt .
Edit the /etc/wvdial.conf with Root permission:
sudo gedit /etc/wvdial.conf
will be able to dial out with Root permission:
sudo wvdial
Many modems for which scanModem fails have Conexant chips.
From http://www.linuxant.com/drivers/modemident.php
get the ListModem tool, which will report on Conexant chipset modems
If the above tests fail, please provide any independent information available on your modem.
If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
Start > Settings > Control Panel > Classical View (for Window XP) > System
> Hardware > Device Manager > Modems > Click on the + > Modem. Double click to
expand the graphic. Manufacturer information may be displayed. For example, CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor
and device information. From the Driver Details TAB, copy out the VENdor and DEVice information.
Next do the Query Modem and record the ATI specifications displayed such as:
ATI3 - Agere SoftModem Version 2.1.22
ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset not detected on
NAME="Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=1043:82ea
IRQ=16
HDA2=00:1b.0
SOFT=8086:27d8.HDA
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller
Primary device ID: 8086:27d8
Subsystem PCI_id 1043:82ea
Softmodem codec or chipset from diagnostics:
from Archives:
Support type needed or chipset:
Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.
2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD_gcc4.4_alsa1.0.21.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.3
and the compiler used in kernel assembly: 4.4.3
The patch utility is needed for compiling ALSA drivers, and possibly others.
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.32-21-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 273312 2010-03-06 22:59 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
