modemdata

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





      
 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.33.3-85.fc13.i686.PAE 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=i686,  
Linux version 2.6.33.3-85.fc13.i686.PAE (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP Thu May 6 18:27:11 UTC 2010
 scanModem update of:  2008_08_26

 There are no blacklisted modem drivers in /etc/modprobe*  files 
Attached USB devices are:
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0002 Linux Foundation 2.0 root hub
 ID 04f2:b044 Chicony Electronics Co., Ltd Acer CrystalEye Webcam
 ID 1d6b:0002 Linux Foundation 2.0 root hub

USB modems not recognized

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:293e	1025:013c	Audio device: Intel Corporation 82801I 

 Modem interrupt assignment and sharing: 
  31:        679        252   PCI-MSI-edge      hda_intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
pci 0000:00:1b.0: reg 10: [mem 0xf4800000-0xf4803fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: irq 31 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64

 The PCI slot 00:1b.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 


===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== 
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.21
The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1
00-02: ALC268 Analog : ALC268 Analog : capture 1
00-03: INTEL HDMI 0 : INTEL HDMI 0 : playback 1

about /proc/asound/cards:
------------------------
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xf4800000 irq 31

 PCI slot 00:1b.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.33.3-85.fc13.i686.PAE/kernel/sound/pci/hda/snd-hda-intel.ko
 New HDA card type: 
    
    

 The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Conexant ID 2c06
Address: 1
Function Id: 0x2
Vendor Id: 0x14f12c06
Subsystem Id: 0x10250093
Revision Id: 0x100000
Modem Function Group: 0x2

 The audio card hosts a softmodem chip:  0x14f12c06

 14f1 is the Conexant Vendor ID, and 0x14f12c06 a softmodem chipset.
 Get a hsfmodem package through http://www.linuxant.com

If not a Conexant modem, the driver hsfmodem-drivers with its dependent drivers:

----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips. 

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 00:1b.0:
	Modem chipset  detected on
NAME="Audio device: Intel Corporation 82801I "
CLASS=0403
PCIDEV=8086:293e
SUBSYS=1025:013c
IRQ=31
CHIP=0x14f12c06
IDENT=hsfmodem
Driver=hsfmodem-drivers

 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 82801I 
      Primary device ID:  8086:293e
 Support type needed or chipset:	hsfmodem
 


Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt


Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion:	2.6.33.3_85.fc13.i686.PAE
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php 
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the 
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
	unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
   dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm
 Start at  http://www.linuxant.com/drivers/hsf/full for
 eventually download of a hsfmodem-7.68.00.12full_k.???.zip package
 with ??? the package type (deb, rpm, tar etc)
 These packages have compiled drivers but will also compile a driver, 
 if there is a mismatch between the resident kernel and provided driver.
 The generic hsfmodem-7.68.00.12full.tar.gz package only provides compiling support

 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.4.4
             and the compiler used in kernel assembly: 4.4.4

 linux-headers-2.6.33.3-85.fc13.i686.PAE resources needed for compiling are not manifestly ready!

 If compiling is necessary packages must be installed, providing:
	


If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-r-xr-xr-x. 1 root root 328104 Apr 13 09:47 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
         chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	 chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
lock

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 virbr0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:

     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux