Tu,
scanModem reports that your modem could be supported through
slmodem-2.9.11-2010XXYY code + ungrab-winmodem code :
Predictive diagnostics for card in bus 00:09.0:
Modem chipset detected on
NAME="Modem: Smart Link Ltd. LM-I56N "
CLASS=0703
PCIDEV=2003:8800
SUBSYS=16ef:2800
IRQ=11
IDENT=slamr
For candidate modem in: 00:09.0
0703 Modem: Smart Link Ltd. LM-I56N
Primary device ID: 2003:8800
Support type needed or chipset: slamr
The modem is supported by the Smartlink
plus the slmodemd helper utility. Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
For 2.6.32-24-generic compiling drivers is necessary. As of now, the
current packages at
http://linmodems.technion.ac.il/packages/smartlink/ are the
ungrab-winmodem-20090716.tar.gz and slmodem-2.9.11-20100718.tar.gz
Do download:
http://linmodems.technion.ac.il/packages/smartlink/ungrab-winmodem-20090716.tar.gz
and
http://linmodems.technion.ac.il/packages/smartlink/slmodem-2.9.11-20100718.tar.gz
$ tar -zxvf slmodem-2.9.11-20100718.tar.gz
$ cd slmodem-2.9.11-20100718
$ make KERNEL_DIR=/lib/modules/2.6.32-24-generic/build
$ make
$ sudo make install
$ cd ..
$ tar -zxvf ungrab-winmodem-20090716
$ sudo make
$ sudo make install
$ sudo modprobe ungrab-winmodem
$ sudo modprobe slamr
$ sudo slmodemd -c YOUR_COUNTRY /dev/slamr0
leave running then open a tab/or another terminal and type
$ sudo wvdialconf /etc/wvdial.conf
after finding /dev/ttySL0 as the modem port, then edit
/etc/wvdial.conf remove the ";" and add username/password/ ISP phone
number and a line "Carrier Check = no", then try to dialout.
You may also check out sl-modem-??, but Marv may give you better
details to work with that as it may make your work easier.
Regards,
Antonio
On 9/8/10, Tu Teri <tuteri@xxxxxxxxx> wrote:
> Need help for installing modem driver in my PC. ModemData.txt attached.
> thx.
>
>
>
>
